首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 112 毫秒
1.
The magnetic field is one of the most important parameters in solar physics,and a polarimeter is the key device to measure the solar magnetic field.Liquid crystals based Stokes polarimeter is a novel technology,and will be applied for magnetic field measurement in the first space-based solar observatory satellite developed by China,Advanced Space-based Solar Observatory.However,the liquid crystals based Stokes polarimeter in space is not a mature technology.Therefore,it is of great scientific significance to study the control method and characteristics of the device.The retardation produced by a liquid crystal variable retarder is sensitive to the temperature,and the retardation changes 0.09°per 0.10℃.The error in polarization measurement caused by this change is 0.016,which affects the accuracy of magnetic field measurement.In order to ensure the stability of its performance,this paper proposes a high-precision temperature control system for liquid crystals based Stokes polarimeter in space.In order to optimize the structure design and temperature control system,the temperature field of liquid crystals based Stokes polarimeter is analyzed by the finite element method,and the influence of light on the temperature field of the liquid crystal variable retarder is analyzed theoretically.By analyzing the principle of highprecision temperature measurement in space,a high-precision temperature measurement circuit based on integrated operational amplifier,programmable amplifier and 12 bit A/D is designed,and a high-precision space temperature control system is developed by applying the integral separation PI temperature control algorithm and PWM driving heating films.The experimental results show that the effect of temperature control is accurate and stable,whenever the liquid crystals based Stokes polarimeter is either in the air or vacuum.The temperature stability is within±0.0150℃,which demonstrates greatly improved stability for the liquid crystals based Stokes polarimeter.  相似文献   

2.
At present, optical autonomous navigation has become a key technologyin deep space exploration programs. Recent studies focus on the problem of orbit de-termination using autonomous navigation, and the choice of filter is one of the mainissues. To prepare for a possible exploration mission to Mars, the primary emphasisof this paper is to evaluate the capability of three filters, the extended Kalman filter(EKF), unscented Kalman filter (UKF) and weighted least-squares (WLS) algorithm,which have different initial states during the cruise phase. One initial state is assumedto have high accuracy with the support of ground tracking when autonomous navi-gation is operating; for the other state, errors are set to be large without this support.In addition, the method of selecting asteroids that can be used for navigation fromknown lists of asteroids to form a sequence is also presented in this study. The simula-tion results show that WLS and UKF should be the first choice for optical autonomousnavigation during the cruise phase to Mars.  相似文献   

3.
镜面材料     
结合实际加工过的镜面,回顾了用于反射镜面材料的发展历程、性质和加工方法,叙述了材料的现状及存在的问题,为今后的发展指出了方向.最后对常用的反射镜面材料性能进行归纳,对被广泛看好的新材料一碳化硅的应用及加工做了简要叙述.  相似文献   

4.
<正>Research in Astronomy and Astrophysics publishes original research papers and reviews on all branches of astronomy and astrophysics.Reviews are by invitation only.Important new results that require rapid publication can be submitted as a Letter(Letters must be restricted in length to 6 printed pages).  相似文献   

5.
6.
VLBI观测表明,TeV伽马射线Blazar(耀变体)的喷流运动视速度远小于MeV/GeV伽马射线Blazar,然而TeV伽马射线辐射流量的快速变化却要求这些Blazar的相对论喷流速度与MeV/GeV Blazar的相当.对于这一矛盾,目前有多种解释.为了检验这些模型,我们收集了VLBI对Blazar喷流运动的监测数据,样本包括86个FSRQs(平谱射电类星体)、22个BL Lac天体,共108个Blazar;从统计上研究了,该样本中各Blazar最大视速度喷流节点的位置与射电光度相关关系.结果表明,Blazar最大视速度喷流节点的位置与射电光度有较强的相关关系,随着Blazar射电光度的减小,喷流中最大视速度VLBI节点的位置到VLBI核的距离逐渐变小.这意味着,TeV伽马源(低光度Blazar)的喷流减速区距离VLBI核较近,喷流从高能辐射区到VLBI可分辨尺度已经减速,支持减速喷流模型对TeV伽马射线Blazar上述矛盾的解释.  相似文献   

7.
通过Mueller矩阵运算,推导出采用接收光强的方法计算波片相位延迟的唯一表达式,并由此总结归纳出4种测试波片延迟的方法,发现目前发表的多种光强测量法都可归纳为该4种中的一种.文中给出了这4种方法的测试原理,并对各方法中方位角误差带来的测量误差进行了分析及比对,给出不同方法所适宜的测试对象.  相似文献   

8.
征稿启事     
《中国科学院上海天文台年刊》第33期(2012年)开始征稿。欢迎台内外科技工作者,把您们的科研成果、阶段性成果、观测数据分析、仪器研制、课题研究的有关软件编制、工作报告等在此期上发表。来稿要求观点明确、论据充足、论述简练、资料数据反映的情况务求核实准确。  相似文献   

9.
缘起 2010年6月14日5时许,一块直径一米左右的巨大“冰雹”从天而降,将河北沧州任丘市北辛庄乡东李各庄村一村民(刘先生)家的屋顶砸出一个直径一米的大坑,还砸坏了屋顶上的卫星天线。我与北京天文馆陨石专家张宝林到沧州时顺路经过陨石爱好者宋铁梁家中作客,宋老汉拿出多年珍藏的“陨石”约三十余块,我对宋老汉说这些都是铁矿石不是陨石。  相似文献   

10.
2010年11月3日,第十二届中国科协年会长乐“高鲁星”雕像揭幕仪式在高鲁天文馆举行。长乐籍院士陈建生、王任享院士,福州市政协副主席、福州市科协主席雷成才及长乐市委书记吴贤德为“高鲁星”纪念雕塑揭幕。  相似文献   

11.
中国科学院国家授时中心的临潼--蒲城微波时间传输系统承担着守时基准钟房(临潼)与发播控制钟房(蒲城)之间的时间同步比对任务.截至2006年底,该系统已经连续工作了28年,由于设备老化等原因,系统的可靠性和性能指标严重下降.概括介绍了微波时间传输系统的技术改造方案和数字微波系统实现的功能,初步结果表明改造后的微波时间传输系统的性能得到了提高.  相似文献   

12.
对国产实验室型氢脉泽在守时中两方面的应用可能性进行了初步分析和实验研究:1.分析了影响长期稳定工作的可能因素并进行了控制,使氢脉泽可直接参加守时;2.氢脉泽作为实时主钟高稳源的可能性,取得了较为乐观的结果.HZ在TAI计算中权重最高已达到9.实验在继续进行中.  相似文献   

13.
定量分析了原子钟的时间频率特性产生的守时时差,估算了原子时频标准的守时时差对有关物理量测量所产生的影响.给出了现代实用型原子钟的性能指标比较表,和用现代无线电手段传递、比对时频标准信号达到的指标.论述了高精度时间频率标准在大地、深空间探测、VLBI及毫秒脉冲星计时应用测量中的重要地位、作用.阐述了50 m射电望远镜的科学目标、“嫦娥”1号探月卫星任务对时间标准提出的高精度要求和选用原则.为了实现其科学目标和任务,必须建设与其研究目标相适宜的、标准尽可能高的原子时频标准,才能获得高质量的数据信息和高效能的研究成果.并对建设怎样的时间标准等问题进行讨论和提出具体建议.  相似文献   

14.
概括介绍了中国科学院国家授时中心(简称NTSC)时间基准系统的组成、功能和相关工作的最新进展情况。NTSC负责我国标准时间的产生、保持和发播。多年来,NTSC的守时系统以完美的表现满足了国家大科学装置—长、短波授时系统的发播控制任务的要求。2008年度,NTSC的守时工作取得突破性进展,实现的指标综合排名于全球实验室的2~3位,我国守时工作已经跻身世界前列,NTSC已成为国际原子时合作单位中最重要的守时实验室之一。  相似文献   

15.
讨论运用PCI 9054(美国PLX公司生产的接口芯片)作为接口芯片的PCI(Peripheral Component Interconnect)板卡的软硬件设计,以实现天线跟踪的两个时间同步中断。利用标准秒信号中断作为系统时钟同步信号,并同步产生时间间隔为20ms(或40、50ms,可选)的中断信号,来处理天线跟踪指令输出。中断信号通过PCI中断口INTA#接入计算机,在驱动中识别不同的中断信号,并在应用程序响应中断处理后,命令ACU(Antenna Control Unit)机,实现射电天文望远镜的同步跟踪。其控制过程分3部分阐述:硬件设计、驱动程序设计、安装及应用;着重讨论了前两者的设计方法及思路。  相似文献   

16.
The goal of all time laboratories’ pursue is to produce and keep a stable, precise and reliable time scale. The long-term stability of the time scale is mainly taken into account in the traditional ALGOS algorithm, while the local atomic time scale should give consideration to both the long-term and shortterm stabilities. From the analysis and research on the atomic clock noise model and under the condition that the long-term stability of the local atomic time scale does not drop, a complete algorithm is proposed which is suitable for the calculation of the local time scale TA (NTSC) carried out at the time laboratory with the time-keeping clocks of a unitary type and being close in performance at the National Time Service Center, called the NTSC for short, of Chinese Academy of Sciences. The data of all the clocks in the NTSC which participated in the calculation of the International Atomic Time (TAI) all the year round in 2008 are applied to the test and verification of the new algorithm, with the result showing that both the short- and long-term stability indexes of the obtained TA (NTSC) are improved. The research result is suitable for the calculation of the atomic time scale of the time laboratory whose time keeping system is similar to that of the NTSC.  相似文献   

17.
铷原子频标使用最广泛,小型化是其最重要的发展趋势。微波腔小型化、电子线路数字化以及附加特殊功能是铷原子频标小型化的主要技术手段。相干布居囚禁(CPT)频标是一种可以做到芯片级的新型原子频标。目前相干布居囚禁频标的技术方案有:传统方案,物理系统采用MEMS(micro-electro-mechanical system)[0]技术的方案和整机采用MEMS[0]技术的方案。实现小型化后的原子频标将会迎来蓬勃发展的前景。  相似文献   

18.
基于CPLD的数字移相分频钟   总被引:3,自引:0,他引:3  
设计了一种数字移相分频钟 ,其中利用了先进的复杂可编程逻辑器件(CPLD -ComplexProgrammableLogicDevice)技术 ,将硬件电路模块化 ,把各功能模块集成在一个芯片中。与以往用分立元件设计硬件电路相比 ,具有电路简单 ,可靠性高 ,便于调试的特点  相似文献   

19.
为了提升时间传递链路的可靠性, 国际权度局(Bureau International des Poids et Mesures, BIPM)自\lk2020年起将Galileo时间比对正式作为UTC (Coordinated Universal Time)计算的备份链路, 因此对接收机Ga-lileo信号时延校准是全球各守时实验室参与UTC链路的必要工作. 以德国物理技术研究院(Physikalisch-Tech-nische Bundesanstalt, PTB)和中国科学院国家授时中心(National Time Service Center, NTSC)已校准的GPS (Global Positioning System)链路为参考, 将PT09接收机设为参考站, 对NTSC的NT02和NT05两台不同型号接收机的Galileo E3 (Galileo E1&E5a)总时延进行校准并验证. 结果表明: NT02和NT05 Galileo E3总时延分别为74.6ns和46.5ns, 校准不确定度均为3.5ns, 且校准时延比较稳定; NT02和NT05校准后与其他守时实验室已校准接收机的GPS P3和Galileo E3链路的共视比对结果基本一致; 以NTP3与其他实验室接收机GPS P3链路的共视比对结果为参考, 其偏差均值均小于1.5ns, 在校准不确定度范围内.  相似文献   

20.
主要介绍了用于保持中国科学院国家授时中心 (原陕西天文台 )时间尺度的 6台铯原子钟 (代号分别为 :Cs0 7、Cs0 8、Cs1 1、Cs1 6、Cs1 7、Cs1 8)的运行情况。 6台铯原子钟自 1 997年下半年正式给BIPM (国际权度局 )提供数据 ,参加国际原子时(TAI)计算至今已达 5年之久 ,在此期间 ,除Cs1 8因铯束管故障在 1 999年返回美国检修外 ,其它 5台钟运行情况良好。详细介绍、分析每台钟在 1 998~ 2 0 0 1年期间的整体特性、不同采样间隔下的稳定度比较、速率漂移以及它们在TAI系统中的取权情况。通过分析比较 ,使我们对每台钟的运行情况作出恰如其分的评价 ,以便更好地利用国家授时中心的钟资源 ,做好守时和授时工作。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号