首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 958 毫秒
1.
Abstract— We have recovered 18 kg of layered tektites from 10 tektite-bearing localities in Laos and central Vietnam, including 5 localities around the town of Muong Nong (Laos). Several of these deposits originally contained several hundred kilograms of layered tektite fragments, and one fragmented mass may have been as large as 1000 kg. This is the largest single deposit of tektites yet reported. In this region, layered tektite fragments are found in isolated clusters usually associated with a pebbly laterite horizon that is 0–1 m below the surface. Near Khe Sanh, Vietnam, we estimate the abundance of layered tektite fragments to be ～100 g/m2. This is greater than five times the abundance estimated for northeast Thailand (Fiske et al., 1996). In a region that extends from northeast Thailand, through central Laos, and into central Vietnam, we found only layered tektites, which confirmed the existence of a large (>50 000 km2) subfield of the Australasian strewn field with only layered tektites. The east-west extent of the “layered-only” subfield is well constrained, but little field data exist to constrain its north-south extent.  相似文献   

2.
Abstract The source crater of the youngest and largest of the tektite strewnfields, the Australasian strewnfield, has not been located. A number of lines of evidence indicate that the Muong Nong-type tektites, primarily found in Indochina, are more primitive than the much more abundant and widespread splash-form tektites, and are proximal to the source. In this study the spatial distribution of Muong Nong-type tektite sites and chemical character have been used to indicate the approximate location of the source. The variation of Muong Nong-type tektite chemical composition appears to be caused by mixing of two silicate rock end-members and a small amount of limestone, and not by vapor fractionation. The variation in composition is not random, and does not support in-situ melting or multiple impact theories. The distribution of both Muong Nong and splash-form tektite sites suggest the source is in a limited area near the southern part of the Thailand-Laos border.  相似文献   

3.
Abstract— We have analyzed the size, shape, composition, and spatial distribution of 6 kg of layered tektite fragments excavated from a 3 m × 3 m area near the town of Ban Huai Sai in northeast Thailand. Our analysis suggests that these fragments represent a single homogeneous mass that underwent fragmentation far in the past and has undergone little disturbance since its deposition. We have also studied the stratigraphic occurrence of layered tektites exposed in situ near the town of Ban Huai Om. Tektites were found along a disconformable paleo-erosion surface covered by recent aeolian sand, similar to other occurrences throughout Southeast Asia. This stratigraphic relationship provides little chronostratigraphic information and, thus, does not support a stratigraphic “age paradox” for the Australasian tektites. The present-day surface density of layered tektites in this area is 2 to 20 g/m2.  相似文献   

4.
Abstract— The size, shape, composition, and vesicle content of 6 kg of layered tektite fragments, excavated near the town of Huai Sai, Thailand, place some constraints on the formation of layered tektites. The mass, shape, and distribution of the fragments are not consistent with an origin as a “puddle” of impact melt but suggest that they were derived from a single equant block. The presence of vesicles up to 7 mm in mean diameter within the tektite fragments suggests that the material was too viscous to allow for significant gravity-driven flow. These results suggest that layered tektites may be analogous to lava bombs, which may have been stretched and deformed in flight but underwent little flow after landing. Rather than being a product of “unusual circumstances,” such as multiple impacts, layered tektites may differ from splash-form tektites only in initial temperature of formation, speed of ejection, and small differences in initial composition.  相似文献   

5.
Abstract— During Leg 150 of the Ocean Drilling Project (ODP), two sites (903C and 904A) were cored that have sediments of the same biostratigraphic age as the upper Eocene tektite-bearing ejecta layer at Deep Sea Drilling Project (DSDP) Site 612. Core 45X from ODP Site 904A (～4 km north of Site 612) contains a 5 cm thick tektite-bearing ejecta layer, and Core 56 from Site 903C (～8 km north-northwest of Site 904) contains a 2 cm thick layer of impact ejecta without any tektite or impact glass. Shocked quartz and feldspar grains, with multiple sets of planar deformation features (PDFs), and abundant coesite-bearing grains are present at both sites. The major oxide contents, trace element compositions, and rare earth element (REE) patterns of the Site 904 tektites are similar to those of the Site 612 tektites and to North American tektites (especially bediasites). The ?Sr and ?Nd values for one composite tektite sample from Site 904 fall within the range previously obtained for the Site 612 tektites, which defines a linear trend that, if extrapolated, would intersect the values obtained for North American tektites. The water contents of eight tektite fragments from Site 904 range from 0.017 to 0.098 wt%, and, thus, are somewhat higher than is typical for tektites. The heavy mineral assemblages of the 63–125 μm size fractions from the ejecta layers at Sites 612, 903, and 904 are all similar. Therefore, we conclude that the ejecta layer at all three sites is from the same impact event and that the tektites at Sites 904 and 612 belong to the North American tektite strewn field. Clinopyroxene-bearing (cpx) spherules occur below, or in the lower part of, the main ejecta layer at all three sites. At all three sites, the cpx spherules have been partly or completely replaced with pyrite that preserved the original crystalline textures. Site 612, 903, and 904 cpx spherules are similar to those found in the Caribbean Sea, Gulf of Mexico, central equatorial Pacific, western equatorial Pacific, and eastern Indian Ocean. The cpx event appears to have preceded the North American tektite event by 10–15 ka or less. The fining-upward sequence at all three sites and concentration of the denser, unmelted impact ejecta at the top of the tektite layer at Sites 612 and 904 suggest that the tektite-bearing ejecta layers are not the result of downslope redeposition and that the unmelted ejecta landed after the glass. Geographic variations in thickness of the tektite-bearing ejecta layer, the lack of carbonate clasts in the ejecta layer, and the low CaO content of the tektite glass suggest that the ejecta (including the tektite glass) were derived from the Chesapeake Bay structure rather than from the Toms Canyon structure. A sharp decline in microfossil abundances suggests that local environmental changes caused by the impact may have had adverse effects on benthic foraminifera, radiolaria, sponges, and fish as well as the planktic foraminifera.  相似文献   

6.
Abstract— A 10.79-kg layered tektite from Hainan is the largest tektite from China, and the fifth largest reported to date. It together with a 1.9-kg Hainan tektite described by Yuan (1981) greatly extends the area of the Australasian field within which layered tektites having masses > 1 kg have been found.  相似文献   

7.
Abstract— Elemental and isotopic compositions of the noble gases have been determined in six North American tektites (4 bediasites and 2 georgiaites) and one Ivory Coast tektite. Radiogenically produced 4He may explain the large 4He/36Ar ratios measured relative to air, despite significant diffusive losses. The Ne isotopic composition is enriched in 20Ne consistent with a single stage mass fractionation process. The enormous 20Ne/36Ar enrichments observed in all tektite samples, similar to those reported from other tektites and impact glasses, are attributed to atmospheric diffusion into the samples following solidification. The North American tektites show a systematic increase in 84Kr/36Ar and 132Xe/36Ar relative to air, with enrichments greater than those determined for any other tektite group or terrestrial samples other than shales. These enrichments are inconsistent with existing models of dissolving Kr and Xe in tektite glass without elemental fractionation at atmospheric pressures equivalent to ∼40 km altitude. The Kr and Xe isotopic compositions are indistinguishable from atmospheric within experimental uncertainty.  相似文献   

8.
Abstract— Tektites are natural glasses formed from terrestrial material that was melted and displaced by the impact of an extraterrestrial body. The surface and near-surface compositions of tektite glass results from fractionation during impact and ejection, and/or postsolidification weathering. The first goal of this study was to characterise the surface and near-surface (in the order of tens of angstroms) chemical composition of two tektites by x-ray photoelectron spectroscopy (XPS), and to estimate the importance of weathering vs. fractionation during flying. In order to separate the chemical modification due to weathering from that due to fractionation during ballistic flight, we studied two samples from the Australasian tektite strewn field. One of them was collected in a hot desert area (Nullarbor Plain, Australia) and the other, in a humid climate (Thailand). Our study reveals the presence of well-developed leached layers in both tektites. In the Australian tektite, Si is depleted in the topmost layers (a few tens of angstroms). A more complex chemical zoning is defined in the tektite from Thailand. These leached layers are comparable to those observed in weathered glasses, and therefore we conclude that weathering is responsible for the chemical composition of the surface and near-surface compositions. The second goal was to investigate the chemical environment of O, N and C in the glass. The O peak was resolved into two bridging O components (Si-O-Si and Al-O-Si) that are comparable to O environments in artificial glasses. The binding energy of the C1s electron is typical for C-C and C-H bonds in hydrocarbons; minor organic acid components are also present. Nitrogen is only observed on the surface of the Thailand tektite. The binding energy of N1s is comparable to that of ammonia, and the surface enrichment in N is interpreted as due to sorption related to interactions between glass and fluid buffered by the organic material in the soil.  相似文献   

9.
Abstract— U-Th-Pb, Rb-Sr, and Sm-Nd isotopic signatures of corroded, but unaltered, black glassy tektites from Cretaceous-Tertiary (K-T) boundary rock on Haiti are not consistent with their derivation from an impact on MOR-derived oceanic crust or continental regions involving middle Proterozoic or older crustal material. Two single-grain and two batches of these tektites yielded present-day ?Nd = ?3.0 to ?3.4, ?Sr = +55 to 56, 206Pb/204Pb = 18.97; 207Pb/204Pb = 15.74; 208Pb/204Pb = 38.91 values, and Pb, Rb, Sr, Sm, and Nd concentrations of ～6, ～45, ～535, ～4.7, and ～22 ppm, respectively. Initial ?Nd and ?Sr values for the tektites are different from time-integrated Nd-Sr isotopic signatures for almost all oceanic crustal types. Age-corrected Pb isotopic values are similar to those for pelagic sediments with distinctly higher 207Pb/204Pb values compared to MORB. However, these results do not exclude the possibility of an oceanic impact site, if the tektites were derived from fine-grained sediments that typically overlie such regions, although other mineralogic and chemical evidence from K-T boundary debris suggests otherwise. Moreover, the Nd average crustal residence age of ～ 1080 Ma (TDM) for the black tektites eliminates impact sites on continental crustal regions involving middle Proterozoic or older rocks, or sedimentary rocks largely derived from them. Previously reported major and trace element data from the black tektites suggest that the source material was possibly sedimentary with a composition similar to average shale or graywacke. If this is the case, then the Nd isotopic data suggest that the source rocks were not older than Silurian (TCHUR = 400 Ma) in age, and were composed largely of young (< 1080 Ma) crustal material. Of the suspected K-T boundary impact sites, both the Manson (Iowa) and Chicxulub (Yucatan) structures occur in suitable lithologies to yield the Haitian black tektites, although neither structure has as yet proven to be the tektite source.  相似文献   

10.
Ten splash‐form tektites from the Australasian strewn field, with masses ranging from 21.20 to 175.00 g and exhibiting a variety of shapes (teardrop, ellipsoid, dumbbell, disk), have been imaged using a high‐resolution laser digitizer. Despite challenges due to the samples’ rounded shapes and pitted surfaces, the images were combined to create 3‐D tektite models, which captured surface features with a high fidelity (≈30 voxel mm?2) and from which volume could be measured noninvasively. The laser‐derived density for the tektites averaged 2.41 ± 0.11 g cm?3. Corresponding densities obtained via the Archimedean bead method averaged 2.36 ± 0.05 g cm?3. In addition to their curational value, the 3‐D models can be used to calculate the tektites’ moments of inertia and rotation periods while in flight, as a probe of their formation environment. Typical tektite rotation periods are estimated to be on the order of 1 s. Numerical simulations of air flow around the models at Reynolds numbers ranging from 1 to 106 suggest that the relative velocity of the tektites with respect to the air must have been <10 m s?1 during viscous deformation. This low relative velocity is consistent with tektite material being carried along by expanding gases in the early time following the impact.  相似文献   

11.
  相似文献   

12.
Abstract— The source crater for Australasian tektites remains to be positively identified We suggest that Tonle Sap, a roughly oval lake in south-central Cambodia, may represent the remnant of that crater. The size of the lake (about 100 km × 35 km), location (Indochina), inferred geologic age (recent), and orientation of the lake, as well as the geographical distribution of tektites, are consistent with this suggestion. The elongated shape of the lake with its long axis pointing toward Australia may be the result of an oblique impact of a NW to SE-moving object a few km in diameter. The absence of a raised rim and a central peak may be related to a low impact angle, soft target rocks, or high post-impact erosion and sedimentation rates. The scarcity of Muong Nong-type (layered) tektites near Tonle Sap may be due to extensive post-impact alluvial deposition, which buried the tektites. The chemical composition of Upper Indosinias formation sandstones from Phnom Batheay was determined. There are significant differences between the composition of indochinite tektites and these rocks, which are thus unlikely to represent tektite source rocks.  相似文献   

13.
Abstract— Three samples of Darwin Glass, an impact glass found in Tasmania, Australia at the edge of the Australasian tektite strewn field were dated using the 40Ar/39Ar single‐grain laser fusion technique, yielding isochron ages of 796–815 ka with an overall weighted mean of 816 ± 7 ka. These data are statistically indistinguishable from those recently reported for the Australasian tektites from Southeast Asia and Australia (761–816 ka; with a mean weighted age of 803 ± 3 ka). However, considering the compositional and textural differences and the disparity from the presumed impact crater area for Australasian tektites, Darwin Glass is more likely to have resulted from a distinct impact during the same period of time.  相似文献   

14.
Elgygytgyn crater (lat. 67–30 N, long. 172–00 E) in remote northeastern Siberia is proposed as the meteorite impact site from which the Australasian tektite strewnfield was splashed. The following points support this interpretation: 1, Elgygytgyn very likely is an impact crater and is of adequate size, 18 km across, to generate tektites; 2, the apex of the strewnfield points towards this crater; 3, the terrane is Mesozoic which fits the age of the tektite parental material from Sr/Rb data; 4, compositional and specific gravity lineations within the strewnfield are directed, in part, toward this crater; 5, the high velocity tektites, australites, are distal with respect to this crater while the low velocity tektites, splash forms and Muong Nong tektites, are proximal; 6, the loess deposits and mixed acid/basic rocks of the impact site provide a suitable subgraywacke-type source material; 7, the erosional state of Elgygytgyn suggests that its age may well be in accordance with that of the Australasian tektite event, i.e., 700,000 years.  相似文献   

15.
Abstract— 40Ar/39Ar ages of four tektites (moldavites) from southern Bohemia (near ?eské Budějovice, Czech Republic) and a tektite from Lusatia (near Dresden, Germany) have been determined by 11 step‐degassing experiments. The purpose of the study was to enlarge the 40Ar/39Ar data base of moldavites and to check the age relations of the Bohemian and Lusatian samples. The mean plateau‐age of the Bohemian samples, which range from 14.42 to 14.70 Ma, is 14.50 ± 0.16 (0.42) (2σ) Ma (errors in parentheses include age error and uncertainty of standard monitor age). The plateau age of the Lusatian sample of 14.38 ± 0.26 (0.44) (2σ) Ma confirms the previously published 40Ar/39Ar age of 14.52 ± 0.08 (0.40) (2σ) Ma, and demonstrates that the fall of Lusatian and Bohemian tektites were contemporaneous. Because of their geochemistry and their ages there is no doubt that the Lusatian tektites are moldavites. Accepting that moldavites are ejecta from the Nördlinger Ries impact, the new ages also date the impact event. This age is slightly younger (about 0.2–0.3 Ma) than the age suggested by earlier K‐Ar determinations.  相似文献   

16.
The Australasian tektites are quench melt glass ejecta particles distributed over the Asian, Australian, and Antarctic regions, the source crater of which is currently elusive. New 40Ar/39Ar age data from four tektites: one each from Thailand, China, Vietnam, and Australia measured using three different instruments from two different laboratories and combined with published 40Ar/39Ar data yield a weighted mean age of 788.1 ± 2.8 ka (±3.0 ka, including all sources of uncertainties) (P = 0.54). This age is five times more precise compared to previous results thanks, in part, to the multicollection capabilities of the ARGUS VI noble gas mass spectrometer, which allows an improvement of almost fourfold on a single plateau age measurement. Diffusion experiments on tektites combined with synthetic age spectra and Monte Carlo diffusion models suggest that the minimum temperature of formation of the Thai tektite is between 2350 °C and 3950 °C, hence a strict minimum value of 2350 °C.  相似文献   

17.
Abstract— Late Eocene tektite material from DSDP site 612 is composed of angular to spherical tektites and microtektites containing abundant vesicles and a few unmelted to partially melted mineral inclusions. The major element compositions of the 612-tektites are generally comparable to those of North American tektites, but the physical features suggest that the DSDP-612 tektites were formed by less severe shock melting. The 87Sr/86Sr and 143Nd/144Nd compositions of 612-tektites: a) show much wider ranges than the tightly constrained group of North American tektites and microtektites, and b) are significantly different from those of other groups of tektites. The existence of large isotopic variations in tektites from DSDP site 612 requires that they were formed from a chemically and isotopically heterogeneous material in a regime that is distinctive from that of other groups of tektites. TNDCHUR and TSrUR model ages of the 612-tektites indicate that they were formed from a crustal source of late Precambrian mean age (800–1000 Ma) which in middle Palaeozoic time (?400 Ma) was further enriched in Rb/Sr during sedimentary processes. These source characteristics suggest that the impact which produced the 612-tektites occurred in rocks of the Appalachian orogeny or sediments derived from this orogenic belt. Potential source materials for both 612-tektites and North American tektites are present on the eastern and southeastern part of the North American continent and its adjacent shelf. The distinct isotopic differences between 612-tektites and North American tektites indicate that the two groups of tektites were either formed by the impact of more than one bolide in the same general area, or by a single impact event that sampled different layers.  相似文献   

18.
Abstract— An examination of data collected over the last 30 years indicates that the percent of glass fragments vs. whole splash forms in the Cenozoic microtektite strewn fields increases towards the source crater (or source region). We propose that this is due to thermal stress produced when tektites and larger microtektites fall into water near the source crater while still relatively hot (>1150 °C). We also find evidence (low major oxide totals, frothing when melted) for hydration of most of the North American tektite fragments and microtektites found in marine sediments. High-temperature mass spectrometry indicates that these tektite fragments and microtektites contain up to 3.8 wt% H2O. The H2O-release behavior during the high-temperature mass-spectrometric analysis, plus high CI abundances (0.05 wt%), indicate that the North American tektite fragments and microtektites were hydrated in the marine environment (i.e., the H2O was not trapped solely on quenching from a melt). The younger Ivory Coast and Australasian microtektites do not exhibit much evidence of hydration (at least not in excess of 0.5 wt% H2O); this suggests that the degree of hydration increases with age. In addition, we find that some glass spherules (with <65 wt% SiO2) from the upper Eocene clinopyroxene-bearing spherule layer in the Indian Ocean have palagonitized rims. These spherules appear to have been altered in a similar fashion to the splash form K/T boundary spherules. Thus, our data indicate that tektites and microtektites that generally contain >65 wt% SiO2 can undergo simple hydration in the marine environment, while impact glasses (with <65 wt% SiO2) can also undergo palagonitization.  相似文献   

19.
Moldavites represent tektites derived from the Ries impact structure (~24 km diameter, ~15 Myr old) in southern Germany. Two new localities with parautochthonous moldavites in southwestern Poland were found. In these localities, fluvial sediments of the so‐called Gozdnicka formation host the moldavites. Characteristic tektite features, especially bubbles and inclusions of lechatelierite, are reported. The moldavites' size distribution and their abraded shapes indicate that they were redeposited from the nearby Lusatia substrewn field.  相似文献   

20.
Abstract– Tektites, natural silica‐rich glasses produced during impact events, commonly contain bubbles. The paper reviews published data on pressure and composition of a gas phase contained in the tektite bubbles and data on other volatile compounds which can be released from tektites by either high‐temperature melting or by crushing or milling under vacuum. Gas extraction from tektites using high‐temperature melting generally produced higher gas yield and different gas composition than the low‐temperature extraction using crushing or milling under vacuum. The high‐temperature extraction obviously releases volatiles not only from the bubbles, but also volatile compounds contained directly in the glass. Moreover, the gas composition can be modified by reactions between the released gases and the glass melt. Published data indicate that besides CO2 and/or CO in the bubbles, another carbon reservoir is present directly in the tektite glass. To clarify the problem of carbon content and carbon isotopic composition of the tektite glass, three samples from the Central European tektite strewn field—moldavites—were analyzed. The samples contained only 35–41 ppm C with δ13C values in the range from ?28.5 to ?29.9‰ VPDB. This indicates that terrestrial organic matter was a dominant carbon source during moldavite formation.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号