共查询到20条相似文献，搜索用时 40 毫秒
1.
NASA is proposing a new receiving facility that needs to beamform broadband signals from hundreds of antennas. This is a similar problem to SKA beamforming with the added requirement that the processing should not add significant noise or distortion that would interfere with processing spacecraft telemetry data. The proposed solution is based on an FX correlator architecture and uses oversampling polyphase filterbanks to avoid aliasing. Each beamformer/correlator module processes a small part of the total bandwidth for all antennas, eliminating interconnection problems. Processing the summed frequency data with a synthesis polyphase filterbank reconstructs the time series. Choice of suitable oversampling ratio, and analysis and synthesis filters can keep aliasing below −39 dB while keeping the passband ripple low. This approach is readily integrated into the currently proposed SKA correlator architecture. 相似文献
2.
An FX correlator implementation for the SKAMP project is presented. The completed system will provide capabilities that match those proposed for the aperture plane array concept for the SKA. Through novel architecture, expansion is possible to accommodate larger arrays such as the 600-station cylindrical reflector proposals. In contrast to many current prototypes, it will use digital transmission from the antenna, requiring digital filterbanks and beamformers to be located at the antenna. This will demonstrate the technologies needed for all long baseline antennas in the SKA. 相似文献
3.
John D. Bunton 《Experimental Astronomy》2001,11(3):193-206
Future radiotelescopes need ever increasing sensitivity. With the limits of receiver sensitivity being reached this can only be achieved by increasing collecting area. The increase in antenna numbers and the multi-resolution capabilities of these telescopes, such as the SKA, means a significant departure from existing designs is needed. In this article, some fundamental designs for antenna arrays that uniformly sample the UV plane are presented. The SKA is used to provide target specifications. The designs presented allow asymmetric configurations providing more freedom for site selection. They also allow a direct tradeoff between field of view and correlator complexity. 相似文献
4.
The performance goals of the Square Kilometre Array (SKA) are such that major departures from prior practice for imaging interferometer arrays are required. One class of solutions involves the construction of large numbers of stations, each composed of one or more small antennas. The advantages of such a “large-N” approach are already documented, but attention has recently been drawn to scaling relationships for SKA data processing that imply excessive computing costs associated with the use of small antennas. In this paper we examine the assumptions that lead to such scaling laws, and argue that in general they are unlikely to apply to the SKA situation. A variety of strategies for SKA imaging which exhibit better scaling behaviour are discussed. Particular attention is drawn to field of view issues, and the possibility of using weighting functions within an advanced correlator system to precisely control the field-of-view. 相似文献
5.
John D. Bunton 《Experimental Astronomy》2001,11(1):193-206
Future radiotelescopes need ever increasing sensitivity. With the limits of receiver sensitivity being reached this can only
be achieved by increasing collecting area. The increase in antenna numbers and the multi-resolution capabilities of these
telescopes, such as the SKA, means a significant departure from existing designs is needed. In this article, some fundamental
designs for antenna arrays that uniformly sample the UV plane are presented. The SKA is used to provide target specifications.
The designs presented allow asymmetric configurations providing more freedom for site selection. They also allow a direct
tradeoff between field of view and correlator complexity.
This revised version was published online in July 2006 with corrections to the Cover Date. 相似文献
6.
The Square Kilometre Array (SKA) is expected to become the world’s most powerful radio telescope at meter and centimeter wavelength in the coming decades. The construction of SKA will be divided into two phases. The first phase (SKA1), scheduled for completion in 2023, will construct 10 % of the whole collecting area. The second phase (SKA2) will build the rest 90 % collecting area. The SKA1 consists of several types of arrays including SKA1-low and SKA1-mid. The latter is a dish array consisting of ~200 medium-size antennas. The integrated dish array in SKA2 will expand to 2500 dishes, spreading 3000 kilometers across the southern part of Africa. The demanding specifications and enormous number of the SKA dish raise challenges in the dish development such as mass production with high performance at low cost, quick installation and high reliability. Dish Verification Antenna China (DVA-C) was built as one of three initial prototypes. A novel single-piece panel reflector made of carbon fiber reinforced polymer (CFRP) was adopted. In this study, an L-band receiver is installed to make DVA-C a complete system for experiments on antenna performance test and preliminary observations. The performance of DVA-C including the system noise temperature, pointing accuracy, antenna pattern, and aperture efficiency has been tested. Preliminary observations such as pulsars and HI are then conducted, which indicates that the DVA-C can not only serve as an educational instrument and key technology test bed, but also be applied for scientific work such as pulsar timing, all-sky HI survey, multi-frequency monitoring of variable sources etc. 相似文献
7.
We discuss the detection of redshifted line and continuum emission at radio wavelengths using a Square Kilometer Array (SKA), specifically from low-excitation rotational molecular line transitions of CO and HCN (molecular lines), the recombination radiation from atomic transitions in almost-ionized hydrogen (radio recombination lines; RRLs), OH and H2O maser lines, as well as from synchrotron and free–free continuum radiation and HI 21-cm line radiation. The detection of radio lines with the SKA offers the prospect to determine the redshifts and thus exact luminosities for some of the most distant and optically faint star-forming galaxies and active galactic nuclei, even those galaxies that are either deeply enshrouded in interstellar dust or shining prior to the end of reionization. Moreover, it provides an opportunity to study the astrophysical conditions and resolved morphologies of the most active regions in galaxies during the most active phase of star formation at redshift z 2. A sufficiently powerful and adaptable SKA correlator will enable wide-field three-dimensional redshift surveys at chosen specific high redshifts, and will allow new probes of the evolution of large-scale structure (LSS) in the distribution of galaxies. The detection of molecular line radiation favours pushing the operating frequencies of SKA up to at least 26 GHz, and ideally to 40 GHz, while very high redshift maser emissions requires access to about 100 MHz. To search for LSS the widest possible instantaneous field of view would be advantageous. 相似文献
8.
Gabriel Grigorescu Paul Alexander Rosie C. Bolton Roshene McCool 《Experimental Astronomy》2009,27(1-2):95-107
The future Square Kilometre Array (SKA) radio telescope is an interferometer array that will use a variety of collector types, including approximately 2500 dishes distributed with separations up to a few thousand kilometres, and about 250 aperture array (AA) stations located within 200 km of the core. The data rates associated with each individual collector are vast: around 10 GBytes/s for each dish and 2 TBytes/s for an AA station. As each of these must be connected directly to a central correlator, designing a cost-effective cabling and trenching infrastructure presents a great engineering challenge. In this paper we discuss approaches to performing this optimisation. In graph theory, the concept of a minimum spanning tree (MST) is equivalent to finding the minimum total trench length joining a set of n arbitrary points in the plane. We have developed a set of algorithms which optimise the infrastructure of any given telescope layout iteratively, taking into consideration not only trenching but also cabling and jointing costs as well. Solutions for few example configurations of telescope layout are presented. We have found that these solutions depend significantly on the collectors’ output data rates. When compared to a “traditional” MST-based approach which minimises trenching costs only, our algorithms can further reduce total costs by up to 15–20%. This can influence greatly the SKA infrastructure related costs. 相似文献
9.
Jaap D. Bregman 《Experimental Astronomy》2004,17(1-3):407-416
Five out of six Square Kilometre Array (SKA) science programs need extensive surveys at frequencies below 1.4 GHz and only four need high-frequency observations. The latter ones drive to expensive high surface accuracy collecting area, while the former ask for multi-beam receiver systems and extensive post correlation processing. In this paper, we analyze the system cost of a SKA when the field-of-view (Fov) is extended from 1 deg2 at 1.4 GHz to 200 deg2 at 0.7 GHz for three different antenna concepts. We start our analysis by discussing the fundamental limitations and cost issues of wide-band focal plane arrays (FPA) in dishes and cylinders and of wide-band receptors in aperture arrays. We will show that a hybrid SKA in three different antenna technologies will give the highest effective sensitivity for all six key science programs. 相似文献
10.
Five-hundred-meter Aperture Spherical Telescope project 总被引：2，自引：0，他引：2
A Five hundred meter Aperture Spherical Telescope (FAST) is proposed to be built in the unique karst area of southwest China,
and will act, in a sense, as a prototype for the Square Kilometer Array (SKA). It will be over twice as large as the Arecibo
telescope coupled with much wider sky coverage. Some results from site surveys for such a SKA concept are briefly reported.
Technically, FAST is not simply a copy of the existing Arecibo telescope but has rather a number of innovations. Firstly,
the proposed main spherical reflector, by conforming to a paraboloid of revolution in real time through actuated active control,
enables the realization of both wide bandwidth and full polarization capability while using standard feed design. Secondly,
a feed support system which integrates optical, mechanical and electronic technologies will effectively reduce the cost of
the support structure and control system. Pre-research on FAST has become a key project in the CAS.
This revised version was published online in July 2006 with corrections to the Cover Date. 相似文献
11.
Roger Schultz 《Experimental Astronomy》2004,17(1-3):119-139
Large number of microwave antennas of size and surface accuracy appropriate for the Square Kilometre Array (SKA) have not been manufactured previously. To minimize total cost, the design needs to be much more carefully considered and optimized than would be affordable for a small number of antennas. The required surface area requires new methods of manufacture and production-line type assembly to be considered. A blend of past antenna construction technology, creativity, and new technology is needed to provide the best possible telescope for the proposed SKA science goals. The following key concepts will be discussed with respect to reflector antennas and many supporting photographs, figures and drawings will be included. Surface and supporting structure – comparison of panels with a one-piece shell as produced by hydroforming. Combined reflector and mount geometry – performance/cost materially governed by this geometry which must be optimized for SKA requirements which are significantly different from typical communications antennas Types of fully steerable mounts – king post, turntable bearing and wheel and track Pointing accuracy – factors effecting cost, non-repeatable and repeatable errors Axis drive concepts – traction devices, gears, screws, etc. Life cycle costs – maintenance and power costs must be considered Synergistic design – all of the above factors must be considered together with the wideband feed and receiver system to optimize the whole system 相似文献
12.
John D. Bunton 《Experimental Astronomy》2004,17(1-3):185-189
In the early days of radioastronomy cylindrical parabolic reflectors were a popular technology. This paper traces some of the factors that have hindered their use in recent times. These factors no longer apply and as the cost of electronics decreases their applicability to the SKA becomes more and more favourable. 相似文献
13.
B. Peng J. M. Sun H. Y. Zhang T. Y. Piao J. Q. Li L. Lei T. Luo D. H. Li Y. J. Zheng R. NAN 《Experimental Astronomy》2004,17(1-3):423-430
Radio frequency interference (RFI) test observations were carried out at one of the candidate Square Kilometre Array (SKA) sites in Guizhou province, following the “RFI Measurement Protocol for Candidate SKA Sites” (hereafter RFI protocol). All data (raw and calibrated) are preserved in some suitable format, such as that set by the international RFI working group of the Site Evaluation and Selection Committee (SESC). An RFI test in December 2003 was performed according to Mode 1 of the RFI Protocol, in order to identify technical difficulties which might arise during a co-ordinated RFI measurement campaign over a period of 1 year. In this paper we describe the current equipment, observational technique and data presentation. The preliminary results demonstrate that the RFI situation at Dawodang depression in Guizhou province makes it quite a promising location for the proposed SKA. Furthermore, the first session of the RFI monitoring program, which was made in May 2004, showed that a complete RFI measurement including both modes 1 and 2 of the RFI Protocol would take about 2 weeks. The possible ways to minimize some limitations of the current equipment are also discussed, which will enable us to meet the RFI protocol. 相似文献
14.
天体搜索是天文数据处理流程的一个重要环节,也是以平方公里阵列射电望远镜(Square Kilometre Array, SKA)为代表的下一代射电望远镜在面向海量数据处理中的挑战之一.现今天体自动搜索算法、软件已日趋成熟并投入应用,不过在自动化、兼容性等方面仍具有提升空间.以更自动化、更适应海量数据需求的天体搜索算法研究为宗旨,以现有算法为研究基础,天体自动搜索软件系统得到设计和开发.该系统包含友好的交互式用户操作界面,具备可视化输出数据显示、兼容不同数据输入和输出并包含为实际应用服务的文件管理功能.该系统对于大天区图以及图像集,均能够很好地进行自动化处理.测试结果显示,上述方法对于天体搜索的改进有一定成效.后续将在此基础上对该集成系统做进一步的改进开发,以适应更多的需求. 相似文献
15.
This paper presents an improved input-buffer architecture for the X part of a very large FX correlator that optimizes memory use to both increase performance and reduce the overall power consumption. The architecture uses an array of two-accumulator CMACs that are reused for different pairs of correlated signals. Using two accumulators in every CMAC allows the processing array to alternately correlate two sets of signal pairs selected in such a way so that they share some or all of the processed data samples. This leads to increased processing bandwidth and a significant reduction of the memory read rate due to not having to update some or all of the processing buffers in every second processing cycle. The overall memory access rate is at most 75 % of that of the single-accumulator CMAC array. This architecture is intended for correlators of very large multi-element radio telescopes such as the Square Kilometre Array (SKA), and is suitable for an ASIC implementation. 相似文献
16.
张利 Li-Gong Mi Long Xu Ming Zhang Dan-Yang Li Xiang Liu Feng Wang Yi-Fan Xiao Zhong-Zu Wu 《天文和天体物理学研究(英文版)》2021,(3):117-127
A sky model from CLEAN deconvolution is a particularly effective high dynamic range reconstruction in radio astronomy,which can effectively model the sky and remove the sidelobes of the point spread function(PSF)caused by incomplete sampling in the spatial frequency domain.Compared to scale-free and multi-scale sky models,adaptive-scale sky modeling,which can model both compact and diffuse features,has been proven to have better sky modeling capabilities in narrowband simulated data,especially for large-scale features in high-sensitivity observations which are exactly one of the challenges of data processing for the Square Kilometre Array(SKA).However,adaptive scale CLEAN algorithms have not been verified by real observation data and allow negative components in the model.In this paper,we propose an adaptive scale model algorithm with non-negative constraint and wideband imaging capacities,and it is applied to simulated SKA data and real observation data from the Karl G.Jansky Very Large Array(JVLA),an SKA precursor.Experiments show that the new algorithm can reconstruct more physical models with rich details.This work is a step forward for future SKA image reconstruction and developing SKA imaging pipelines. 相似文献
17.
It is suggested that the development of the SKA will drastically change the face of radio astronomy in the 21st Century. A
FAST-style SKA would admit observations of low contrast features, and would be the best design for studying the `dark ages'
of the Universe (x≫ 1) where sub-arcmin total power instruments can usefully be employed. To date there have been no proposals for post-SKA,
billion square-metra instruments; we speculate that mobile communication systems can be used. In the very distant future,
SKA multi-beam systems could be used to collect signals reflected by Solar system bodies such as the asteroid belt.
This revised version was published online in July 2006 with corrections to the Cover Date. 相似文献
18.
Software costs for radio telescopes have nearly always been underestimated. Since the Square Kilometre Array is often called a software telescope, repeating the usual error would be particularly egregious. We estimate software costs by scaling from the reasonably well-known costs for the Atacama Large Millimeter Array. The resulting model has sharp dependency on the complexity of the SKA, suggesting the obvious – that software costs can most easily be limited by constraining the scientific and operational requirements. A bottom-up costing will not be possible until SKA is much more clearly defined. For the moment, we recommend that 20% of the SKA budget be allocated to software development. 相似文献
19.
Wim Brouw 《Astrophysics and Space Science》2001,278(1-2):205-208
The next generation radio telescope being planned is the Square Kilometer Array (SKA): an international project which is currently
in the research and development phase. Australia is one of the partner countries in the SKA consortium; here I describe some
of the SKA research being undertaken in Australia.
This revised version was published online in July 2006 with corrections to the Cover Date. 相似文献
20.
Ray Norris 《Experimental Astronomy》2004,17(1-3):79-85
I present a brief overview of the SKA projects conducted under the Australian Major National Research Facilities program, and describe the largest of these projects – the SKA New Technology Demonstrator. The goal of this project is to construct an SKA technology demonstrator which will explore and evaluate a number of SKA technologies in a remote radio-quiet environment, while also achieving a restricted set of key science goals. Infrastructure and access to back-end facilities will also be provided for other international SKA groups who wish to evaluate or demonstrate technologies, or conduct science experiments, in a remote, radio-quiet, environment. 相似文献