首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 390 毫秒
1.
This article describes the architecture of the new GREGOR telescope and its instrument control system. A short summary is given on the communication structure between instruments and other devices during observation. Because of its importance to all instruments the main functions of the telescope control system are described in detail (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

2.
The installation and operation of a telescope in Antarctica represent particular challenges, in particular the requirement to operate at extremely cold temperatures, to cope with rapid temperature fluctuations and to prevent frosting. Heating of electronic subsystems is a necessity, but solutions must be found to avoid the turbulence induced by temperature fluctuations on the optical paths. ASTEP 400 is a 40cm Newton telescope installed at the Concordia station, Dome C since 2010 for photometric observations of fields of stars and their exoplanets. While the telescope is designed to spread star light on several pixels to maximize photometric stability, we show that it is nonetheless sensitive to the extreme variations of the seeing at the ground level (between about 0′′.1 and 5′′) and to temperature fluctuations between –30°C and –80 °C. We analyze both day‐time and night‐time observations and obtain the magnitude of the seeing caused by the mirrors, dome and camera. The most important effect arises from the heating of the primary mirror which gives rise to a mirror seeing of 0′′.23 K–1. We propose solutions to mitigate these effects. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

3.
望远镜调度是望远镜运行中的关键组成部分, 用于辅助科研人员进行合理的观测计划安排, 提高望远镜的运行效率, 获取高质量的观测数据. 然而, 由于不同观测项目的科学需求不同, 望远镜的调度过程十分复杂. 针对短周期多目标的观测项目, 考虑望远镜换源时转动时长、观测高度角等因素进行建模, 采用贪心算法对中国科学院新疆天文台南山26m望远镜脉冲星到达时间观测列表进行调度. 通过模拟表明, 使用算法完成的观测列表可以有效地减少观测过程中的平均转动时长, 提升观测数据的质量, 提高望远镜时间利用率, 减少科研人员对观测列表编排的负担.  相似文献   

4.
A54 Cosmic Ray Acceleration in Galactic Wind Shocks A71 Detection of Ultra‐High Energy Cosmic Rays and Neutrinos with LOFAR A80 Status of the gravitational‐wave detector GEO600 A87 Recent Results and Future of the MAGIC gamma‐ray telescope A92 Cosmic ray detection with the radio technique A93 Cosmic Ray Physics with IceCube A94 The resonance‐like gamma‐ray absorption processes for use in astrophysics A97 Geometry reconstruction of air shower fluorescence detectors revisited A102 Supermassive Binary Black Holes & Radio Jets A108 Muonic Component of Air Showers Measured by KASCADE‐Grande A110 Towards new frontiers: observation of photons with energies above 1018 eV A112 The IceCube Neutrino Telescope A114 The ground‐based gamma‐ray observatory CTA A116 IceCube: Recent Results and Prospects A117 Particle Physics with AMANDA and IceCube A118 Altitude dependence of fluorescence light emission by extensive air showers A120 Neutrino‐induced cascades in AMANDA & IceCube A122 Enhancement Telescopes for the Pierre Auger Southern Observatory in Argentina A123 Proton spectra from relativistic shock environments in AGN and GRBs A124 The Baikal Neutrino Telescope – Physics Results A127 Searches for point‐like sources of cosmic neutrinos with IceCube A128 The MAGIC/IceCube Target of Opportunity Programtest run A131 Supernova detection with IceCube: from low to high energy neutrinos A132 Measurement of the UHECR energy spectrum from hybrid data of the Pierre Auger Observatory A133 Extension of IceCube at Lower Energy: the Use of AMANDA as Nested Array and the Future Prospectives A135 Searching for neutrinos with the Pierre Auger Observatory A138 Search for Transient Emission of Neutrinos in IceCube A140 Acoustic Neutrino Detection in Antarctic Ice A159 AMANDA limits on the diffuse muon‐neutrino flux: physics implications A164 Investigation of the Radio Emission of Cosmic Ray Air Showers with LOPES A168 The Northern Site of the Pierre Auger Observatory A170 Shower reconstruction and size spectra with KASCADE‐Grande data A171 Neutrinos from Gamma Ray Bursts: predictions and limits from AMANDA‐II data A172 Simulation study of shower profiles from ultra‐high energy cosmic rays A174 Upper limit to the photon fraction in cosmic rays above 1019 eV from the Pierre Auger Observatory A176 Astrophysics at MeV energies A180 Study of the Cosmic Ray Composition above 0.4 EeV using the Longitudinal Profiles of Showers observed at the Pierre Auger Observatory A185 Backgrounds for UHE horizontal neutrino showers A186 The Front‐End Cards of the Pierre Auger Surface Detectors: Test Results and Performance in the Field A187 Monte Carlo Studies for MAGIC‐II A194 Measuring the proton‐air cross section from logitudinal air shower profiles A195 The UHECR energy spectrummeasured at the Pierre Auger Observatory A203 Highlights of Observations of Galactic Sources with the MAGIC telescope A207 Adesign study for a 12.5 m ∅︁ Imaging Air Cherenkov Telescope for ground‐based γ ‐ray astronomy A210 The Future of Long‐Wavelengths Radio‐Astronomy in Germany: LOFAR and GLOW A211 Online Monitoring of the Pierre Auger Observatory A216 OPTIMA‐Burst – Catching GRB Afterglows (and other Transients) with High Time Resolution A227 JEM‐EUSO mission A232 Rapid Variations in AGN: Clues on Particle Accelerators A235 Systematic search forVHEgamma‐ray emission from X‐ray bright high‐frequency peaked BL Lac objects A237 Prospects for GeV Astronomy in the Era of GLAST A241 Improvements of the energy reconstruction for the MAGIC telescope by means of analysis and Monte Carlo techniques A265 Discovery of VHE γ ‐rays from BL Lacertae with the MAGIC telescope A266 Results of two observation cycles of LS I+61°303 with the MAGIC telescope A267 Wide Range Multifrequency Observations of Northern TeV Blazars A269 Diffusive and convective cosmic ray transport in elliptical galaxies  相似文献   

5.
The scientific objective of the Planetary (& Lunar) Rotation Monitor (PRM) telescope is to study the terrestrial planet's (the Moon's) rotation and its interior structure and physics by in-situ observation. In order to verify the brand new principle of observations and the data processing method, the prototype of the telescope is designed and manufactured. The prototype's optical system consists of a commercial telescope and trihedron mirror set placed at the entrance of its light path to realize the capability of observing three fields of view (FOVs) simultaneously. The ground-based validation observation began in 2017, and the images containing the stars from three FOVs were achieved. Star images from different FOVs are initially mixed together, but they can be classified into the three FOVs respectively by calculating the displacement of star images on the CCD plate between two adjacent exposures, to make the observational effect be identical with three independent observations of the three FOVs respectively. After image processing, from the orientation variation of the three FOVs simultaneously in space due to the Earth's rotation, the direction of the rotation axis of the Earth in space can be derived. Its deviation from the theoretical value is about 1″ in average, indicating that the working principle and data processing method are effective. The main errors in observations are discussed, including the atmospheric refraction, the thermal deformation of the commercial telescope tube, the low optical resolution caused by the short focal length, the optical aberration in the multi-FOV observation, etc. It is indicated that the spatial resolution of the telescope can be enhanced with a longer focal length, and the observational reliability can be improved by optimizing the thermal deformation control. Improving the optical design in the simultaneous observation of multiple FOVs will also be helpful to the accuracy enhancement.  相似文献   

6.
类地行星(月球)自转监测望远镜的科学目标是在行星(月球)表面现场测量行星(月球)自转并研究其内部结构和物理性质.为了验证全新的观测原理和资料处理方法,项目团队设计制造了一套原理样机,在一台商用天文望远镜的光路前端增加3面反射镜组,使其具有同时观测3个视场的能力.自2017年起在地面上开展了观测实验,获得了混合有3视场星象的图像.通过计算星象在前后图像上的位移实现了归属视场识别,使得观测效果与分视场独立观测等同,证明了用一台设备同时观测多视场的可行性.处理图像并通过3个视场中心的指向变化归算地球自转轴的空间指向,与理论值比较偏差平均约1′′,证明了观测原理和数据处理方法有效.对各种观测误差来源进行了分析,包含大气折射、仪器热稳定性和光学分辨能力的影响等,指出采用更长焦距的望远镜可以提高空间分辨率,优化形变控制可以提高观测稳定性.改进多视场同时观测中的光学设计也有助于精度的提高.  相似文献   

7.
The mechanical structure of the GREGOR telescope was installed at the Observatorio del Teide, Tenerife, in 2004. New concepts for mounting and cooling of the 1.5‐meter primary mirror were introduced. GREGOR is an open telescope, therefore the dome is completely open during observations to allow for air flushing through the open, but stiff telescope structure. Backside cooling system of the primary mirror keeps the mirror surface close to ambient temperature to prevent mirror seeing. The large collecting area of the primary mirror results in high energy density at the field stop at the prime focus of the primary which needs to be removed. The optical elements are supported by precision alignment systems and should provide a stable solar image at the optical lab. The coudé train can be evacuated and serves as a natural barrier between the outer environmental conditions and the air‐conditioned optical laboratory with its sensitive scientific instrumentation. The telescope was successfully commissioned and will start its nominal operation during 2013 (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

8.
We report on the results of a dedicated campaign to derive a pointing model for the GREGOR solar telescope which took place in December 2011. Two main goals were in the focus of this campaign: first to prove the aptness of the GREGOR solar telescope for night‐time, unattended operations and second to derive some qualitative measure of the amount of misalignment in the optical and mechanical parts of the telescope. In the final version, a root‐mean‐square deviation (RMSD) of 1.6″ for the azimuth model and an RMSD of 2.3″ in the elevation model could be achieved (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

9.
This article introduces the new Indian 2 m telescope which has been designed by MT Mechatronics in a detailed conceptual design study for the Indian Institute of Astrophysics, Bangalore. We describe the background of the project and the science goals which shall be addressed with this telescope. NLST is a solar telescope with high optical throughput and will be equipped with an integrated Adaptive Optics system. It is optimized for a site with the kind of seeing and wind conditions as they are expected at a lake site in the Himalayan mountains. The telescope can also be used for certain night time applications. We also give the scientific rationale for this class of telescope (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

10.
Protocols for dealing with time‐sensitive observations have traditionally focused on robotic telescope networks and other types of automated dedicated facilities, mostly in the optical domain. Using UKIRT and JCMT as examples, which are infrared and sub‐millimetre telescopes with a traditional PI‐dominated user base, we discuss how such facilities can join a heterogeneous telescope network to their mutual advantage. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

11.
In this review, we look back upon the literature, which had the GREGOR solar telescope project as its subject including science cases, telescope subsystems, and post‐focus instruments. The articles date back to the year 2000, when the initial concepts for a new solar telescope on Tenerife were first presented at scientific meetings. This comprehensive bibliography contains literature until the year 2012, i.e., the final stages of commissioning and science verification. Taking stock of the various publications in peer‐reviewed journals and conference proceedings also provides the “historical” context for the reference articles in this special issue of Astronomische Nachrichten/Astronomical Notes (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

12.
随着天文技术的不断发展,远程观测和自主观测逐渐成为天文观测的主流趋势,自动调焦技术也越来越受到重视。电动调焦器是天文望远镜不可或缺的附属设备,是实现自动调焦的关键设备。为实现云南天文台丽江观测站10英寸米德望远镜的自动调焦,自行研发了一套天文电动调焦器,设计相关控制电路,制定串口通信协议,并编写了一套开源天文公共对象模型(Astronomy Common Object Model,ASCOM)驱动程序SS Focuser,详细介绍了该电动调焦器的结构原理和实现方法,实测结果表明,电动调焦器具有很好的稳定性,完全满足设计要求,为天文电动调焦器设计提供了可借鉴的经验和方法。  相似文献   

13.
为了在云南天文台40 m天线上开展射电天文研究,使用它进行了河外射电源流量试观测。通过对河外致密源进行ON/OFF跟踪观测,得到射电源的流量变化曲线。但数据质量并不理想,说明系统存在一些问题。随后,根据对该望远镜系统的稳定性及其无线电环境干扰现状的考察,以及对现存问题的分析,提出了相应的解决方法。  相似文献   

14.
Networks are becoming a key element in most current and all future, telescope and observatory projects. The ability to easily and efficiently pass observation data, alert data and instrumentation requests between distributed systems could enable science as never before. However, any effective large scale or meta‐network of astronomical resources will require a common communication format or development resources will have to be continuously dedicated to creating interpreters. The necessary elements of any astronomy communication can be easily identified, efficiently described and rigidly formatted so that both robotic and human operations can use the same data. In this paper we will explore the current state of notification, what notification requirements are essential to create a successful standard and present a standard now under development by the International Virtual Observatory Alliance (IVOA), called the VOEvent. (© 2006 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

15.
This article describes the considerations which led to the current optical design of the new 1.5 m solar telescope GREGOR. The result is Gregorian design with two real foci in the optical train. The telescope includes a relay optic with a pupil image used by a high order adaptive optics system (AO). The optical design is described in detail and performance characteristics are given. Finally we show some verification results which prove that – without atmospheric effects – the completed telescope reaches a diffraction limited performance (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

16.
We review the main issues that are relevant for the observation of extensive air showers from an Earth-orbiting satellite. Extensive air showers are produced by the interaction of ultra-high energy cosmic particles with the atmosphere and can be observed by an orbiting telescope detecting the air scintillation light.We provide the main analytical formulas and semi-analytical results needed to optimize the design of a suitable telescope and estimate the best-expected performance and the minimal necessary requirements for the observation.While we have in mind an EUSO-like general-purpose experiment, the results presented in this paper are useful for any kind of space-based experiment.  相似文献   

17.
The NST (New Solar Telescope), a 1.6 m clear aperture, off‐axis telescope, is in its commissioning phase at Big Bear Solar Observatory (BBSO). It will be the most capable, largest aperture solar telescope in the US until the 4 m ATST (Advanced Technology Solar Telescope) comes on‐line late in the next decade. The NST will be outfitted with state‐of‐the‐art scientific instruments at the Nasmyth focus on the telescope floor and in the Coudé Lab beneath the telescope. At the Nasmyth focus, several filtergraphs already in routine operation have offered high spatial resolution photometry in TiO 706 nm, Hα 656 nm, G‐band 430 nm and the near infrared (NIR), with the aid of a correlation tracker and image reconstruction system. Also, a Cryogenic Infrared Spectrograph (CYRA) is being developed to supply high signal‐to‐noise‐ratio spectrometry and polarimetry spanning 1.0 to 5.0 μm. The Coudé Lab instrumentation will include Adaptive Optics (AO), InfraRed Imaging Magnetograph (IRIM), Visible Imaging Magnetograph (VIM), and Fast Imaging Solar Spectrograph (FISS). A 308 sub‐aperture (349‐actuator deformable mirror) AO system will enable nearly diffraction limited observations over the NST's principal operating wavelengths from 0.4 μm through 1.7 μm. IRIM and VIM are Fabry‐Pérot based narrow‐band tunable filters, which provide high resolution two‐dimensional spectroscopic and polarimetric imaging in the NIR and visible respectively. FISS is a collaboration between BBSO and Seoul National University focussing on chromosphere dynamics. This paper reports the up‐to‐date progress on these instruments including an overview of each instrument and details of the current state of design, integration, calibration and setup/testing on the NST (© 2010 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)  相似文献   

18.
随着频率使用率的提高, 射电天文台址地面或空间存在强电磁干扰致使望远镜接收机系统处于非线性状态. 为减少强电磁干扰的影响、提高天文观测效率, 提出了一种基于望远镜远场区域的强干扰源规避方法. 首先, 通过仿真分析确定的射电望远镜远场方向图, 结合望远镜与干扰源之间的位置关系, 分析了强电磁干扰到达射电望远镜焦点处的功率响应, 并依据接收机第2阶中频放大器性能参数, 确定射电望远镜处于非饱和状态的规避角度计算方法. 其次, 采用该方法计算分析了民航飞机对射电望远镜的影响, 若民航飞机上有主动发射的干扰源, 且不经过反射等传播现象, 当射电望远镜主波束轴偏开一定方向后, 可有效降低对射电望远镜的干扰强度.  相似文献   

19.
经常测量天线参数对于改进天线性能以及联测和单天线观测的数据处理都是至关重要的。以前的记录仪手工测量方式,非常繁琐和低效率,不利于对测量结果进行有效的统一管理和深入分析。根据天线效率的测量为例,在PC和Windows2000/XP软硬件平台下统一编程,集成实现天线参数测量的自动化、操作的人性化以及数据分析和曲线拟合的可视化。这将大大降低人工,提高测量效率,更好地保证天线的可靠、高精度的运行以及观测数据的处理。  相似文献   

20.
目标的完备性搜索是开展近地小行星预警和防御的前提. 为量化评价近地小行星观测效能, 提高监测设备使用效率, 提出一种综合望远镜参数和测站天文条件的观测效能评估方法. 以观测目标信噪比作为检测指标, 设定检测条件形成目标检测方法, 定义评价指标用于评估近地小行星观测效能. 再基于近地小行星轨道数据和尺度分布模型, 建立近地小行星轨道数据模拟样本库. 最后选取中国科学院紫金山天文台盱眙观测站和中国科学院国家天文台冷湖观测台址, 仿真分析近地天体望远镜对直径0.01--30km近地小行星的观测效能, 结果表明: 不考虑两观测站年有效观测时间差异, 近地天体望远镜在冷湖观测全尺寸模拟样本的效能比在盱眙提高了5.21倍, 其中对1km以上直径目标的观测效能相当, 对1km以下直径目标的观测效能差异开始显现, 对0.1km以下直径目标冷湖优势更显著.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号