首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献，搜索用时 343 毫秒
1.
Abstract— The geometry of simple impact craters reflects the properties of the target materials, and the diverse range of fluidized morphologies observed in Martian ejecta blankets are controlled by the near‐surface composition and the climate at the time of impact. Using the Mars Orbiter Laser Altimeter (MOLA) data set, quantitative information about the strength of the upper crust and the dynamics of Martian ejecta blankets may be derived from crater geometry measurements. Here, we present the results from geometrical measurements of fresh craters 3–50 km in rim diameter in selected highland (Lunae and Solis Plana) and lowland (Acidalia, Isidis, and Utopia Planitiae) terrains. We find large, resolved differences between the geometrical properties of the freshest highland and lowland craters. Simple lowland craters are 1.5–2.0 times deeper (≥5s?o difference) with >50% larger cavities (≥2s?o) compared to highland craters of the same diameter. Rim heights and the volume of material above the preimpact surface are slightly greater in the lowlands over most of the size range studied. The different shapes of simple highland and lowland craters indicate that the upper ?6.5 km of the lowland study regions are significantly stronger than the upper crust of the highland plateaus. Lowland craters collapse to final volumes of 45–70% of their transient cavity volumes, while highland craters preserve only 25–50%. The effective yield strength of the upper crust in the lowland regions falls in the range of competent rock, approximately 9–12 MPa, and the highland plateaus may be weaker by a factor of 2 or more, consistent with heavily fractured Noachian layered deposits. The measured volumes of continuous ejecta blankets and uplifted surface materials exceed the predictions from standard crater scaling relationships and Maxwell's Z model of crater excavation by a factor of 3. The excess volume of fluidized ejecta blankets on Mars cannot be explained by concentration of ejecta through nonballistic emplacement processes and/or bulking. The observations require a modification of the scaling laws and are well fit using a scaling factor of ?1.4 between the transient crater surface diameter to the final crater rim diameter and excavation flow originating from one projectile diameter depth with Z = 2.7. The refined excavation model provides the first observationally constrained set of initial parameters for study of the formation of fluidized ejecta blankets on Mars.  相似文献   

2.
New crater size-shape data were compiled for 221 fresh lunar craters and 152 youthful mercurian craters. Terraces and central peaks develop initially in fresh craters on the Moon in the 0–10 km diameter interval. Above a diameter of 65 km all craters are terraced and have central peaks. Swirl floor texture is most common in craters in the size range 20–30 km, but it occurs less frequently as terraces become a dominant feature of crater interiors. For the Moon there is a correlation between crater shape and geomorphic terrain type. For example, craters on the maria are more complex in terms of central peak and terrace detail at any given crater diameter than are craters in the highlands. These crater data suggest that there are significant differences in substrate and/or target properties between maria and highlands. Size-shape profiles for Mercury show that central peak and terrace onset is in the 10–20 km diameter interval; all craters are terraced at 65 km, and all have central peaks at 45 km. The crater data for Mercury show no clear cut terrain correlation. Comparison of lunar and mercurian data indicates that both central peaks and terraces are more abundant in craters in the diameter range 5–75 km on Mercury. Differences in crater shape between Mercury and the Moon may be due to differences in planetary gravitational acceleration (gMercury=2.3gMoon). Also differences between Mercury and the Moon in target and substrate and in modal impact velocity may contribute to affect crater shape.  相似文献   

3.
Abstract— If impact stress reverberation is the primary gradational process on an asteroid at global scales, then the largest undegraded crater records an asteroid's seismological response. The critical crater diameter Dcrit is defined as the smallest crater whose formation disrupts all previous craters globally up to its size; it is solved for by combining relationships for crater growth and for stress attenuation. The computation for Dcrit gives a simple explanation for the curious observation that small asteroids have only modest undegraded craters, in comparison to their size, whereas large asteroids have giant undegraded craters. Dcrit can even exceed the asteroid diameter, in which case all craters are “local” and the asteroid becomes crowded with giant craters. Dcrit is the most recent crater to have formed on a blank slate; when it is equated to the measured diameter of the largest undegraded crater on known asteroids, peak particle velocities are found to attenuate with the 1.2–1.3 power of distance—less attenuative than strong shocks, and more characteristic of powerful seismic disturbances. This is to be expected, since global degradation can result from seismic (cm s?1) particle velocities on small asteroids. Attenuation, as modeled, appears to be higher on asteroids known to be porous, although these are also bodies for which different crater scaling rules might apply.  相似文献   

4.
Abstract— The late Eocene Chesapeake Bay impact structure (CBIS) on the Atlantic margin of Virginia is one of the largest and best‐preserved “wet‐target” craters on Earth. It provides an accessible analog for studying impact processes in layered and wet targets on volatile‐rich planets. The CBIS formed in a layered target of water, weak clastic sediments, and hard crystalline rock. The buried structure consists of a deep, filled central crater, 38 km in width, surrounded by a shallower brim known as the annular trough. The annular trough formed partly by collapse of weak sediments, which expanded the structure to ?85 km in diameter. Such extensive collapse, in addition to excavation processes, can explain the “inverted sombrero” morphology observed at some craters in layered targets. The distribution of crater‐fill materials in the CBIS is related to the morphology. Suevitic breccia, including pre‐resurge fallback deposits, is found in the central crater. Impact‐modified sediments, formed by fluidization and collapse of water‐saturated sand and silt‐clay, occur in the annular trough. Allogenic sediment‐clast breccia, interpreted as ocean‐resurge deposits, overlies the other impactites and covers the entire crater beneath a blanket of postimpact sediments. The formation of chaotic terrains on Mars is attributed to collapse due to the release of volatiles from thick layered deposits. Some flat‐floored rimless depressions with chaotic infill in these terrains are impact craters that expanded by collapse farther than expected for similar‐sized complex craters in solid targets. Studies of crater materials in the CBIS provide insights into processes of crater expansion on Mars and their links to volatiles.  相似文献   

5.
Impact structures in the crystalline rocks of the Canadian Shield range over two orders of magnitude in size and display morphologies recognized elsewhere in the solar system. This contribution draws upon new examinations of drill core from Canadian craters to reaffirm some relationships, modify others, and refine the transitions from simple to complex with central peak to peak‐ring structures. These include recognizing the hyperbolic form of transient craters, sharpening the allochthon–parautochthon distinction, and proposing new formulae for key relationships. It emphasizes the role of dynamic tensile strength and the attenuation of tensile rarefaction waves in determining the size of both transient and final crater dimensions. On Earth, depth (d) to diameter (D) ratios are not invariant at about 1:10 but change smoothly with size from 1:3 at Brent through 1:5 to 1:10 in the largest; that is, d = 0.4 D0.75. In craters in crystalline rocks, the central peak grows at about uplift = 0.175 D until, at D about 28 km, the uplift rises above the original surface then collapses to form a peak‐ring structure. These relationships demonstrate the dominant role of gravity in attenuating tensile rarefaction waves and controlling transient crater depth and overall size relative to the volume shocked.  相似文献   

6.
Reta F. Beebe 《Icarus》1980,44(1):1-19
The simple-to-complex transition for impact craters on Mars occurs at diameters between about 3 and 8 km. Ballistically emplaced ejecta surround primarily those craters that have a simple interior morphology, whereas ejecta displaying features attributable to fluid flow are mostly restricted to complex craters. Size-dependent characteristics of 73 relatively fresh Martian craters, emphasizing the new depth/diameter (d/D) data of D. W. G. Arthur (1980, to be submitted for publication), test two hypotheses for the mode of formation of central peaks in complex craters. In particular, five features appear sequentially with increasing crater size: first flat floors (3–4 km), then central peaks and shallower depths (4–5 km), next scalloped rims (? km), and lastly terraced walls (～8 km). This relative order indicates that a shallow depth of excavation and an unspecified rebound mechanism, not centripetal collapse and deep sliding, have produced central peaks and in turn have facilitated failure of the rim. The mechanism of formation of a shallow crater remains elusive, but probably operates only at the excavation stage of impact. This interpretation is consistent with two separate and complementary lines of evidence. First, field data have documented only shallow subsurface deformation and a shallow transient cavity in complex terrestrial meteorite craters and in certain surface-burst explosion craters; thus the shallow transient cavities of complex craters never were geometrically similar to the deep cavities of simple craters. Second, the average depths of complex craters and the diameters marking the transition from simple to complex craters on Mars and on three other terrestrial planets vary inversely with gravitational acceleration at the planetary surface, g, a variable more important in the excavation of a crater than in any subsequent modification of its geometry. The new interpretation is summarized diagrammatically for complex craters on all planets.  相似文献   

7.
Although researchers in the last decade have been primarily concerned with the exotic findings of the more distant planets and moons in our solar system, as given by the Voyager series, there is still much work to be done on our nearer neighbours, including the Moon. This paper summarizes some basic age dating of a portion of the lunar surface, namely the mare in the crater Tsiolkovsky on the lunar far side.Using the Apollo 15 panoramic camera photographs, the cumulative crater frequency (N km-2) relative to crater diameter (D) distribution has been obtained for the mare in the crater Tsiolkovsky. The diameter size range sampled was 0.07 km < D < 1 km. A total of 12 604 craters were counted and their average apparent diameters measured. There were 85 sample areas on the mare surface which were chosen at random, after exclusion of blanketed, volcanic or secondary cratered areas. It was found that a large proportion of the crater floor contains endogenic features, especially volcanic vents at approximately D = 0.3 km. An additional 7 areas of interest were also examined in detail for comparison with areas of purely primary impact craters. Evidence for up to 8 lava floodings can be detected from the size-frequency distributions although no visual data, e.g., flow lobes, can be seen on the mare surface.The total size-frequency distribution for all the areas is coincident with Neukum et al. (1975a and b) Calibration Distribution in the size range 0.25 km < D < 1 km which is at the smallest crater diameters that they obtained. Neukum et al. (1975a and b) give their distribution as a polynomial of 7th degree. However, in this present study a variation is indicated in the steepening of the curve for D < 0.1 km.The results also approximate (but only for D < 0.6 km) the distribution obtained by Shoemaker et al. (1970) in the range 100 m < D < 3 km where N ~ D -2.9. The best fit line reached for the data given here is N ~ D -2.682.Comparison of the distribution with plots for the maria at Apollo 11, 12, and 15 landing sites show that Tsiolkovsky mare is 3.51 ± 0.1 × 109 yr old. This agrees with other workers (see Gornitz, 1973) who place it between Mare Tranquillitatis (Apollo 11 radiometric dating: 3.5 to 3.9 aeons) and Oceanus Procellarum (Apollo 12: 3.5 to 3.4 aeons). There are no rock samples from Tsiolkovsky to given an absolute age.This places Tsiolkovsky mare within the weighted mean of the age range (1.0 to 4.3 × 109 yr old) of the maria on the Moon. From this it can be concluded that the processes producing the vast basalt outpourings seen on the Moon's face apply for the far side also and that there is a linking factor for the whole Moon.  相似文献   

8.
Abstract— The lengths of the shadows cast within simple, bowl‐shaped impact craters have been used to constrain their depths on a variety of planetary bodies. This technique, however, only yields the “true” crater depth if the shadow transects the crater center where the floor is deepest. In the past, attempts have been made to circumvent this limitation by choosing only craters where the shadow tip lies very near the crater center; but this approach may introduce serious artifacts that adversely affect the slope of the regressed depth vs. diameter data and its variance. Here we introduce an improved method for deriving depth information from shadow measurements that considers three basic shape variations of simple craters: paraboloidal, conical, and flat‐floored. We show that the shape of the cast shadow can be used to constrain crater shape and we derive improved equations for finding the depths of these simple craters.  相似文献   

9.
We report on the first results of a large‐scale comparison study of central pit craters throughout the solar system, focused on Mars, Mercury, Ganymede, Rhea, Dione, and Tethys. We have identified 10 more central pit craters on Rhea, Dione, and Tethys than have previously been reported. We see a general trend that the median ratio of the pit to crater diameter (Dp/Dc) decreases with increasing gravity and decreasing volatile content of the crust. Floor pits are more common on volatile‐rich bodies while summit pits become more common as crustal volatile content decreases. Uplifted bedrock from below the crater floor occurs in the central peak upon which summit pits are found and in rims around floor pits, which may or may not break the surface. Peaks on which summit pits are found on Mars and Mercury share similar characteristics to those of nonpitted central peaks, indicating that some normal central peaks undergo an additional process to create summit pits. Martian floor pits do not appear to be the result of a central peak collapse as the median ratio of the peak to crater diameter (Dpk/Dc) is about twice as high for central peaks/summit pits than Dp/Dc values for floor pits. Median Dpk/Dc is twice as high for Mars as for Mercury, reflecting differing crustal strength between the two bodies. Results indicate that a complicated interplay of crustal volatiles, target strength, surface gravity, and impactor energy along with both uplift and collapse are involved in central pit formation. Multiple formation models may be required to explain the range of central pits seen throughout the solar system.  相似文献   

10.
2D numerical modelling of impact cratering has been utilized to quantify an important depth-diameter relationship for different crater morphologies, simple and complex. It is generally accepted that the final crater shape is the result of a gravity-driven collapse of the transient crater, which is formed immediately after the impact. Numerical models allow a quantification of the formation of simple craters, which are bowl-shaped depressions with a lens of rock debris inside, and complex craters, which are characterized by a structural uplift. The computation of the cratering process starts with the first contact of the impactor and the planetary surface and ends with the morphology of the final crater. Using different rheological models for the sub-crater rocks, we quantify the influence on crater mechanics. To explain the formation of complex craters in accordance to the threshold diameter between simple and complex craters, we utilize the Acoustic Fluidization model. We carried out a series of simulations over a broad parameter range with the goal to fit the observed depth/diameter relationships as well as the observed threshold diameters on the Moon, Earth and Venus.  相似文献   

11.
Geology of the lunar farside crater Necho   总被引：1，自引：0，他引：1  
The lunar farside crater Necho (30 km diameter) displays intricate morphological and structural characteristics. The highland setting provides a complex impact site when compared with the relatively uniform setting of mare craters. Therefore, the effects of pre-impact topography and structure play a dominant role in Necho's formation and modification. Necho's bright ejecta, extensive rays, fresh morphology, and lack of superposed craters indicate that it is extremely young. The asymmetric distribution of ejecta materials may be due to substrate effects, topographic shalowing, or oblique impact.Necho's interior is divided into five physiographic units based on morphologic differences: three floor units (Necho does not display a true flat floor), one hilly central unit, and the wall unit which includes terraces and smooth walls. The interior of the crater also exhibits an unusual asymmetry in the prevalence of terraced units on the western wall. Interior morphology and terrace orientations are probably the result of pre-impact effects. Structural and topographic orientations associated with three large pre-existing degraded craters dominate the impact site.  相似文献   

12.
Abstract— The structure of Canadian impact craters formed in crystalline rocks is analyzed using shock metamorphism and evidence for movement along shear zones. The analysis is based on an interpretation that, beyond the near field region, shock pressure attenuates down axis as P ? R?2, in agreement with nuclear test and computed results, and as P ? R?3 near the surface. In both simple and complex craters, the transient cavity is defined by the limit of fragmentation due to direct and reflected shock waves. The intersection of the transient cavity with hemispheric shock isobars indicates that the transient cavity has a parabolic form. Weakening by dilation during early uplift allows late stage slumping of the walls of simple craters. This is controlled by a spheroidal primary shear of radius rs ～ 2dt, where dt is the depth of the transient crater due to excavation and initial compression. With increasing crater diameter, the size of the transient cavity decreases relative to the shock imprint, suggesting that fragmentation and excavation is limited by progressively earlier collapse of the margins under gravity. Central peak formation in complex craters may be initiated by relaxation of the shock‐compressed central parautochthone, so the primary shear, lubricated by friction melting, meets below the crater floor and drives the continuing upward motion.  相似文献   

13.
We investigate the elevated crater rims of lunar craters. The two main contributors to this elevation are a structural uplift of the preimpact bedrock and the emplacement of ejecta on top of the crater rim. Here, we focus on five lunar complex mare craters with diameters ranging between 16 and 45 km: Bessel, Euler, Kepler, Harpalus, and Bürg. We performed 5281 measurements to calculate precise values for the structural rim uplift and the ejecta thickness at the elevated crater rim. The average structural rim uplift for these five craters amounts to SRU = 70.6 ± 1.8%, whereas the ejecta thickness amounts to ET = 29.4 ± 1.8% of the total crater rim elevation. Erosion is capable of modifying the ratio of ejecta thickness to structural rim uplift. However, to minimize the impact of erosion, the five investigated craters are young, pristine craters with mostly preserved ejecta blankets. To quantify how strongly craters were enlarged by crater modification processes, we reconstructed the dimensions of the transient crater. The difference between the transient crater diameter and the final crater diameter can extend up to 11 km. We propose reverse faulting and thrusting at the final crater rim to be one of the main contributing factors of forming the elevated crater rim.  相似文献   

14.
The location, size, and principal characteristics of the currently known proven and probable terrestrial impact structures are tabulated. Of the 78 known probable structures, only 3 are Precambrian and the majority are <300 my in age. A survey of the variation in preservation with size and age indicates that, unless protected by sedimentary cover, a structure <20 km in diameter has a recognizable life of <600 my. The depth-diameter relationships of terrestrial structures are similar to lunar craters; however, it is believed that terrestrial craters were always shallower than their lunar counterparts. Complex structures formed in sedimentary targets are shallower than those in crystalline targets, and the transition from simple to complex crater morphology occurs in sedimentary strata at approximately one-half the diameter of the morphology transition in crystalline rocks. This is a reflection of target strength. Although observations indicate that crater size, target strength, and surface gravity are variables in the formation of complex craters, they do not permit an unequivocal choice between collapse and rebound processes for the formation of complex structures. It may be that both processes act together in the modification of crater morphology during the later stages of excavation. The major emphasis of recent shock metamorphic studies has been toward the development of models of cratering processes. An important contribution has been the identification, through meteoritic contamination in the melt rocks, of the type of bolide at a number of probable impact structures. This has served to strengthen the link between the occurrence of shock metamorphic effects and their origin by hypervelocity meteorite impact.  相似文献   

15.
Recently a number of studies have identified small lunar geologic structures to be <100 Ma in age using standard remote sensing techniques. Here we present new crater size frequency distributions (CSFDs) and model ages using craters D > 10 m for five small target units: one irregular mare patch (IMP) in Mare Nubium and four regions located on lunar wrinkle ridges in Mare Humorum. For comparison we also date another IMP found in a recent study in Mare Tranquillitatis (Braden et al. 2014 ). Absolute model age (AMA) derivation corresponds to 46 ± 5 Ma and 22 ± 1 Ma for Nubium and Sosigenes IMP, respectively. We show that for IMPs and in nearby control mare regions, similar production-like cumulative log–log SFD slopes of −3 are observed. In contrast, control mare regions in Mare Humorum exhibit shallower equilibrium slopes from −1.83 to −2. Three out of four wrinkle ridges appear to be in equilibrium but with crater lifetimes lower than on the corresponding maria. Low crater frequencies on one wrinkle ridge result in an age of 8.6 ± 1 Ma. This study region contains 80% fresh craters, which suggests that the crater population is still in production indicative of a recent resurfacing event.  相似文献   

16.
Material is ejected from impact craters in ballastic trajectories; it impacts first near the crater rim and then at progressively greater ranges. Ejecta from craters smaller than approximately 1 km is laid predominantly on top of the surrounding surface. With increasing crater size, however, more and more surrounding surface will be penetrated by secondary cratering action and these preexisting materials will be mixed with primary crater ejecta. Ejecta from large craters and especially basin forming events not only excavate preexisting, local materials, but also are capable of moving large amounts of material away from the crater. Thus mixing and lateral transport give rise to continuous deposits that contain materials from within and outside the primary crater. As a consequence ejecta of basins and large highland craters have eroded and mixed highland materials throughout geologic time and deposited them in depressions inside and between older crater structures.Because lunar mare surfaces contain few large craters, the mare regolith is built up by successive layers of predominantly primary ejecta. In contrast, the lunar highlands are dominated by the effects of large scale craters formed early in lunar history. These effects lead to thick fragmental deposits which are a mixture of primary crater material and local components. These deposits may also properly be named regolith though the term has been traditionally applied only to the relatively thin fine grained surficial deposit on mare and highland terranes generated during the past few billion year. We believe that the surficial highland regolith - generated over long periods of time - rests on massive fragmental units that have been produced during the early lunar history.  相似文献   

17.
Abstract— The global high‐resolution imaging of asteroid 433 Eros by the Near‐Earth Asteroid Rendezvous (NEAR) Shoemaker spacecraft has made it possible to develop the first comprehensive picture of the geology of a small S‐type asteroid. Eros displays a variety of surface features, and evidence of a substantial regolith. Large scale facets, grooves, and ridges indicate the presence of at least one global planar structure. Directional and superposition relations of smaller structural features suggest that fracturing has occurred throughout the object. As with other small objects, impact craters dominate the overall shape as well as the small‐scale topography of Eros. Depth/diameter ratios of craters on Eros average ～0.13, but the freshest craters approach lunar values of ～0.2. Ejecta block production from craters is highly variable; the majority of large blocks appear to have originated from one 7.6 km crater (Shoemaker). The interior morphology of craters does not reveal the influence of discrete mechanical boundaries at depth in the manner of craters formed on lunar mare regolith and on some parts of Phobos. This lack of mechanical boundaries, and the abundant evidence of regolith in nearly every high‐resolution image, suggests a gradation in the porosity and fracturing with depth. The density of small craters is deficient at sizes below ～200 m relative to predicted slopes of empirical saturation. This characteristic, which is also found on parts of Phobos and lunar highland areas, probably results from the efficient obliteration of small craters on a body with significant topographic slopes and a thick regolith. Eros displays a variety of regolith features, such as debris aprons, fine‐grained “ponded” deposits, talus cones, and bright and dark streamers on steep slopes indicative of efficient downslope movement of regolith. These processes serve to mix materials in the upper loose fragmental portion of the asteroid (regolith). In the instance of “ponded” materials and crater wall deposits, there is evidence of processes that segregate finer materials into discrete deposits. The NEAR observations have shown us that surface processes on small asteroids can be very complex and result in a wide variety of morphologic features and landforms that today seem exotic. Future missions to comets and asteroids will surely reveal still as yet unseen processes as well as give context to those discovered by the NEAR Shoemaker spacecraft.  相似文献   

18.
Abstract– Hypervelocity (2.5–7.8 km s?1) impact experiments into sandstone were carried out to investigate the influence of projectile velocity and mass, target pore space saturation, target‐projectile density contrast, and target layer orientation on crater size and shape. Crater size increases with increasing projectile velocity and mass as well as with increasing target pore space saturation. Craters in water‐saturated porous targets are generally shallower and larger in volume and in diameter than craters from equivalent impacts into dry porous sandstone. Morphometric analyses of the resultant craters, 5–40 cm in diameter, reveal features that are characteristic of all of our experimental craters regardless of impact conditions (I) a large central depression within a fragile, light‐colored central part, and (II) an outer spallation zone with areas of incipient spallation. Two different mechanical processes, grain fragmentation and intergranular tensile fracturing, are recorded within these crater morphologies. Zone (I) approximates the shape of the transient crater formed by material compression, displacement, comminution, and excavation flow, whereas (II) is the result of intergranular tensile fracturing and spallation. The transient crater dimensions are reconstructed by fitting quadric parabolas to crater profiles from digital elevation models. The dimensions of this transient and of the final crater show the same trends: both increase in volume with increasing impact energy, and with increasing water saturation of the target pore space. The relative size of the transient crater (in percent of the final crater volume) decreases with increasing projectile mass and velocity, signifying a greater contribution of spallation on the final crater size when projectile mass and velocity are increased.  相似文献   

19.
The morphology of a series of highland volcanoes found on the floor of the crater Palisa is similar to that of mare volcanoes. The superposition of the cones and craters indicate that this volcano complex had a complex, multiphase history of development. A blanket of relatively dark ash, which is between 4 and 13 km wide, is observed surrounding these volcanoes.  相似文献   

20.
This article presents fractal analyses of 28 outflow margins from 18 Venusian impact craters. The fractal dimensions of the second parts of R-plots of the outflow outlines were measured by a three-step method. The fractality values for the same outflow measured from images which have only a small difference in resolution are very similar, while large differences in image resolution may result in differences in fractality, possibly due to the fact that we are actually studying geological processes on different scales. The outflows were classified into three general categories: single outflows, multiple outflows and outflow fields. Three conclusions were drawn on the relations between fractality and crater diameter, which may be related to the greater effects caused by the immediate local environment on the outflows from small craters than on those from larger craters. Investigation of the relations between the regional topography and fractality indicates that there are substantially less effects on outflows originating from large craters than on those from small craters. The smooth bending in the R-plot and the higher D-value for the multiple outflows could result from the mixing of various fractal or non-fractal units. When comparing our results with the fractality of terrestrial lava flows, outflows from craters of diameter greater than 50 km seem to resemble aa-type lava flows in their fractal dimensions and outflows from craters of diameter below 50 km tend to be more pahoehoe-like. This preliminary result is based on 28 outflows, however, and the pattern should be investigated more carefully by further more extensive work.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号