葛店矿双庙扩大区三维地震勘探     

张彦湘 《中国煤炭地质》2008,20(2):53-56

葛店煤矿双庙扩大区位于豫、皖两省交界处。勘探区为一轴向北北东向的不对称向斜构造,地层倾角26°～30°,测区深部有岩浆岩侵入体,严重影响煤层赋存形态;地表条件复杂,村庄密集、河流较多,测区东侧塌陷区水塘大面积分布．三维地震勘探野外施工难度大。本区地震勘探观测系统设计为12线18炮制,为避免偏移归位及叠加次数降低等问题,在向斜轴部两侧、村子周边及河岸处适当加密炮点,并在塌陷区利用钢钎插置检波器以保证CDP点完整性。数据处理采取了叠前反褶积、叠前时间偏移等技术,数据处理效果显著。遵循多波组对比、多个数据体综合解释的原则,以纵向、横向和任意时间剖面相结合,充分利用三维可视化技术进行地震资料解释。本次勘探成果查明了主采煤层三2^2、二2煤层的构造形态及埋藏深度;解释落差5m以上断层34条,其中修改原有断层5条;另外新发现小于5m的异常断点22个。经巷道验证煤层底板标高误差0．43％～1．96％,巷道已揭露断层7条,与解释成果基本一致。  相似文献   

贾汪煤田为何未能向北东继续延伸     

刘明雷  冯建强 《中国煤田地质》2003,15(2):5-7

贾汪煤田的基本构造形态为贾汪向斜。通过对贾汪向斜北东延长段原地系统和外来系统的分析研究，认为在贾汪石炭——二叠纪煤田北界伏山前断裂的北东盘上，受构造应力的影响，奥陶系沿着其与寒武系界面间的软弱层被推覆，在原地代之以大面积分布的是青白口——震旦系及部分寒武系而非石炭——二叠系，从而造成了贾汪煤田没有向北东继续延伸。  相似文献   

Halocinèse précoce associée au rifting jurassique dans l'Atlas central de Tunisie (région de Majoura–El Hfay)     

Dorra Tanfous Amri  Mourad Bédir  Mohamed Soussi  Hajer Azaiez  Lahoussine Zitouni  M. Hédi Inoubli  Kamel Ben Boubaker 《Comptes Rendus Geoscience》2005,337(7):703-711

Seismic and sequence stratigraphy analyses, petroleum-well control and surface data studies of the Majoura–El Hfay region in the Central Atlas of Tunisia had led to identify and calibrate Jurassic seismic horizons. Seismic stratigraphic sections, seismic tectonics analyses, isochron and isopach mapping of Jurassic sequences show a differentiated structuring of platform and depocentre blocks limited by deep-seated NE–SW, north–south east–west and NW–SE faults intruded by Upper Triassic salt. The early salt migration seems to have started by the platform fracturing during the Lower Liassic rifting event. These movements are fossilized by thickness variations of Jurassic horizons, aggrading and retrograding onlap and toplap structures between subsiding rim-syncline gutters and high platform flanks intruded by salt pillows and domes. The salt migration is also attested by Middle and Upper Jurassic space depocentre migrations. Around the Majoura–El Hfay study blocks bounded by master faults, Triassic salt have pierced the Cretaceous and Tertiary sedimentary cover in a salt diapir extrusion and salt wall structures. To cite this article: D. Tanfous Amri et al., C. R. Geoscience 337 (2005).  相似文献   

地质图切剖面中褶皱构造的计算机辅助编绘   总被引：7，自引：2，他引：7  

方世明  赵温霞等 《地质与勘探》2002,38(3):52-54

计算机对褶皱的处理能力的强弱，是决定地质图切剖面计算机辅助编绘系统实用价值大小的一个重要指标。以兰姆赛分类方案为基础，通过褶皱形态的几何特征分析，提出一种针对简单背，向斜构造的计算机辅助设计算法，并编写出相应的褶皱剖面形态的模拟程序，利用各种不同形态的褶皱实例进行试验。证明该种算法正确可靠，将其嵌入作先前开发的地质图切剖面编绘程序中，可大大提高地质图切剖面编绘的自动化水平。  相似文献   

圆梁山隧道毛坝向斜段典型岩溶现象及发育分布特征   总被引：11，自引：0，他引：11  

屈科  许模  徐则民  王科  蒋良文 《地质灾害与环境保护》2001,12(1):43-47

圆梁山隧道毛坝向斜段核部及两翼的可溶地层中发衣分布有大量的典型岩溶现象，本文详尽讨论了岩溶洼地，槽谷，巨型组合槽谷和地下溶洞等大型岩溶形态的基本特征，形成机制，受控因素，并进一步认识到其发育分布主要受控于岩性和构造因素。  相似文献   

Primary vs. secondary curved fold axes: Deciphering the origin of the Aït Attab syncline (Moroccan High Atlas) using paleomagnetic data     

《Journal of Structural Geology》2015

The Aït Attab syncline, located in the Central High Atlas, displays a curved geometry in plan view, and is considered as one of the most spectacular fold shapes in the Central High Atlasic belt. We conducted a paleomagnetic study in Jurassic-Cretaceous red beds to investigate the origin of this geometry. The Natural Remanent Magnetization (NRM) is dominated by a secondary magnetization carried by haematite with unvarying normal polarity that has been dated at about 100 Ma. The regional fold test performed in both limbs of the syncline is positive and the paleomagnetic vectors (after tectonic correction) are parallel throughout the curvature, indicating a negative oroclinal bending test. These results are inconsistent with previous works that consider the bent geometry of this syncline to result from subsequent distortion of originally NE–SW trending structures by rotation about a vertical axis. We interpret the NRM data to demonstrate that the changing trend of the Aït Attab syncline is a primary feature, resulting from the influence of pre-existing, NE–SW and E-W-striking extensional faults that developed during a strike-slip regime. Paleomagnetic results also reveal that the tilting observed in the sampled red beds is post Albian, probably linked to the Cenozoic inversion of the High Atlasic belt.  相似文献   

Fan-shaped staurolite in the Bolton syncline, eastern Connecticut: evidence for porphyroblast rotation during growth     

M. D. BUSA  N. H. GRAY 《Journal of Metamorphic Geology》2005,23(9):881-895

Fan‐shaped polycrystalline staurolite porphyroblasts, 3–4 cm in length and 0.5 cm in width, occur together with centimetre‐sized euhedral prismatic staurolite porphyroblasts in pelitic schists of the Littleton Formation on the western overturned limb of the Bolton syncline in eastern Connecticut. The fans consist of intergrown planar splays of [001] elongated prisms, which are crudely radial from a single apex. The apical angles of the radial groupings range up to 70°. The orientations of the individual staurolite prisms are related by a rigid rotation about an axis perpendicular to the fan plane. The zone axes [001] always lie in the plane of the fan. Although the angle between the [100] zone axes of the individual prisms is uniform in each fan, it ranges from +30° to ?30° in different fans. Internally, the fans display: (i) remnants of a passively captured S_i foliation defined by disc‐shaped quartz blebs (type 1 inclusions) and layers of very fine carbonaceous material and tabular ilmenite platelets; (ii) bent staurolite blades and undulose extinction along low‐angle (010) subgrain boundaries near the apex of the fans; (iii) wedge‐shaped dilatational zones containing equigranular inclusion‐free quartz, mica and staurolite, and (iv) growth‐related quartz inclusion trails roughly perpendicular to a crystal face (type 2 inclusions). The S_i inclusion trails are typically perpendicular to the fan surface, radiate parallel to the blades, and show little to no curvature except at the very edge of the fans where they abruptly curve through nearly 90° into parallelism with an external S_e foliation. Careful examination of the three‐dimensional geometry of fans based on U‐stage measurements, serial sections and two‐circle optical goniometric measurements permits a detailed reconstruction of their sequential development. The origin of a fan involves limited intracrystalline deformation and brittle crack dilation, spalling, rotation, and growth of small marginal fragments and of new staurolite along wedge‐shaped zones along the S_i inclusion surfaces. Fans preferentially develop in porphyroblasts in which S_i is subparallel to the 010 cleavage. These internal features reflect the rotation and deformation of a brittle porphyroblast relative to syn‐growth shear stresses.  相似文献   

海城市范家堡子滑石矿床外围找矿预测     

何忠波  王嵩莉  王东波  何伟  姜福伦 《吉林地质》2009,28(3):52-55

简单地介绍了矿床地质特征,详细地分析了矿床的构造特征,推测矿区为一北北东向—倒转向斜的一部分,在F2断层的东侧已控制矿体的下部倒转向斜的核部和另一翼为本区的找矿方向。  相似文献   

黔北地区桃园向斜铝土矿矿床地质特征及找矿方向     

吴先彪  邓虎  王兵  朱尤青 《地质与资源》2013,22(3):218-223

桃园向斜铝土矿位于道真县东部,是务川-正安-道真地区铝土矿的一个组成部分.该铝土矿产于二叠纪梁山组地层中,属于沉积型铝土矿床,其中地质历史时期的沉积间断对铝土矿的形成有重要作用.通过对其成矿地质背景、矿床地质特征的分析,总结了桃园向斜铝土矿的控矿因素及其找矿标志,并指出向斜的深部及西翼中部和南部具有较大的找矿潜力.  相似文献   

松辽盆地南部大情字井向斜区葡萄花油层石油富集规律及成藏模式     

林承焰  曹铮  任丽华  张昌盛  范瑞峰  王叶  邢新亚  马晓兰 《吉林大学学报(地球科学版)》2016,46(6):1598-1610

针对松辽盆地南部大情字井向斜区葡萄花油层石油成藏及富集规律研究程度低的问题,从有效烃源岩、优质储层、油源断层及断裂密集带4个方面入手,深入开展石油富集规律及成藏模式研究。根据断裂发育特征及构造高程,将向斜区进一步划分为3个次级构造单元,并对不同构造单元油藏类型和石油分布特征进行剖析：向斜断裂深洼区以断层-岩性油藏为主;向斜过渡缓坡区以岩性油藏、断层-岩性油藏和构造-岩性油藏为主;向斜过渡陡坡区发育少量岩性油藏。平面上,受断裂密集带发育位置的影响,石油主要呈条带状富集于向斜断裂深洼区和过渡缓坡区;垂向上,受储层发育位置的影响,石油集中分布于葡萄花油层Ⅱ砂组。以此为基础分析向斜区石油富集规律,得出石油富集的4个主控因素：①有效烃源岩厚度控制石油富集;②油源断层组成垂向优势输导通道;③分流河道岔道口是石油富集的有利部位;④断裂密集带控制石油富集。最终建立了向斜区4种成藏模式：①向斜断裂深洼区黑157井以南,嫩一段烃源岩供烃,超压倒灌,油源断层沟通,反向构造控藏;②向斜断裂深洼区黑157井以北,青一段烃源岩供烃,油选择性充注分流河道成藏及断裂密集带内断层组合形成的局部构造控藏;③向斜过渡缓坡区,构造-岩性和岩性圈闭控藏模式;④向斜过渡陡坡区岩性圈闭控藏模式。  相似文献