Wooden Panel Deterioration by Tropical Marine Wood Borers     

Harinder Rai Singh  A. Sasekumar 《Estuarine, Coastal and Shelf Science》1996,42(6):755-769

Wood destruction in test panels ofShorea leprosulawas related to the percentage of fouling, types of wood borers and the number of wood borers. The natural durability ofShorea leprosulapanels was estimated to be 4–5 months in Malaysian marine waters. A higher fouling cover resulted in lower rates of wooden panel deterioration. Larger numbers of wood borers brought about greater panel deterioration. Primary wood destruction was caused by bivalve wood borers, mainlyMartesia striata, Lyrodus pedicellatus, Bankia campanellata, Teredo furciferaandTeredo bartschi. Martesia striatawas the important wood destroying agent in the intertidal zone and, together with the shipworms, was also responsible for panel destruction in the subtidal zone.  相似文献   

Design of ship's bow form by potential-based panel method     

Jaehoon Yoo   《Ocean Engineering》2007,34(8-9):1089-1095

A surface panel method treating a boundary-value problem of the Dirichlet type with the free surface is presented to design a three-dimensional body corresponding to a prescribed pressure distribution. The free surface boundary condition is linearized with respect to the oncoming flow, and computed by four-point finite difference scheme. Sample designs for submerged spheroids and Wigley hull are carried out to demonstrate the stable convergence, the effectiveness and the robustness of the method. The design of a 5500TEU container carrier is performed with respect to reduction of the wave resistance. To reduce the wave resistance, calculated pressure on the hull surface is modified to have the lower fluctuation, and is applied as a Dirichlet type dynamic boundary condition on the hull surface. The designed hull form is verified to have the lower wave resistance than the initial one not only by computation but also by experiment.  相似文献   

Modelling the size selectivities of a trawl codend and an associated square mesh panel   总被引：8，自引：1，他引：8  

Zuur  G.; Fryer  R. J.; Ferro  R. S. T.; Tokai  T. 《ICES Journal of Marine Science》2001,58(3):657-671

  相似文献   

仿鱼尾潜器推进系统的水动力分析   总被引：21，自引：3，他引：21  

苏玉民  黄胜等 《海洋工程》2002,20(2):54-59

以开发适用于小型潜器的仿生操纵与推进系统为研究背景 ,对金枪鱼的月牙形尾鳍进行水动力分析。文中将金枪鱼的尾鳍处理为在做横移和摇摆的耦合运动的同时 ,以某一匀速向前运动的月牙形刚性尾翼。计算中应用了双曲面元和压力库塔条件 ,利用面元法计算分析该三维尾翼的非定常水动力性能。探讨了前进速度、横荡和摇首的幅度、频率及其相位差对推进性能的影响  相似文献   

Separating species using a horizontal panel in the Scottish North Sea whitefish trawl fishery     

Ferro  R. S. T.; Jones  E. G.; Kynoch  R. J.; Fryer  R. J.; Buckett  B-E. 《ICES Journal of Marine Science》2007,64(8):1543-1550

  相似文献   

A B-spline based higher order panel method for analysis of steady flow around marine propellers     

G.-D. Kim  C.-S. Lee  J.E. Kerwin 《Ocean Engineering》2007,34(14-15):2045-2060

A higher order panel method based on B-spline representation for both the geometry and the solution is developed for the analysis of steady flow around marine propellers. The self-influence functions due to the normal dipole and the source are desingularized through the quadratic transformation, and then shown to be evaluated using conventional numerical quadrature. By selecting a proper order for numerical quadrature, the accuracy of the present method can be increased to the machine limit. The far- and near-field influences are shown to be evaluated based on the same far-field approximation, but the near-field solution requires subdividing the panels into smaller subpanels continuously, which can be effectively implemented due to the B-spline representation of the geometry. A null pressure jump Kutta condition at the trailing edge is found to be effective in stabilizing the solution process and in predicting the correct solution. Numerical experiments indicate that the present method is robust and predicts the pressure distribution on the blade surface, including very close to the tip and trailing edge regions, with far fewer panels than existing low-order panel methods.  相似文献   

High-reliability zircon separation for hunting the oldest material on Earth: An automatic zircon separator with image-processing/microtweezers-manipulating system and double-step dating     

Yukio Isozaki  Shinji Yamamoto  Shuhei Sakata  Hideyuki Obayashi  Takafumi Hirata  Ken-ichi Obori  Toshinori Maebayashi  Satoshi Takeshima  Toshikazu Ebisuzaki  Shigenori Maruyama 《地学前缘(英文版)》2018,9(4):1073-1083

Despite the recent development in radiometric dating of numerous zircons by LA-ICPMS, mineral separation still remains a major obstacle, particularly in the search for the oldest material on Earth. To improve the efficiency in zircon separation by an order of magnitude, we have designed/developed a new machine-an automatic zircon separator(AZS). This is designed particularly for automatic pick-up of100 μm-sized zircon grains out of a heavy mineral fraction after conventional separation procedures. The AZS operates in three modes:(1) image processing to choose targeted individual zircon grains out of all heavy minerals spread on a tray,(2) automatic capturing of the individual zircon grains with microtweezers, and(3) placing them one-by-one in a coordinated alignment on a receiving tray. The automatic capturing was designed/created for continuous mineral selecting without human presence for many hours. This software also enables the registration of each separated zircon grain for dating, by recording digital photo-image, optical(color) indices, and coordinates on a receiving tray. We developed two new approaches for the dating; i.e.(1) direct dating of zircons selected by LA-ICPMS without conventional resin-mounting/polishing,(2) high speed U-Pb dating, combined with conventional sample preparation procedures using the new equipment with multiple-ion counting detectors(LA-MIC-ICPMS).With the first approach, Pb-Pb ages obtained from the surface of a mineral were crosschecked with the interior of the same grain after resin-mounting/polishing. With the second approach, the amount of time required for dating one zircon grain is ca. 20 s, and a sample throughput of 150 grains per hour can be achieved with sufficient precision(ca. 0.5%).We tested the practical efficiency of the AZS, by analyzing an Archean Jack Hills conglomerate in Western Australia with the known oldest(4.3 Ga) zircon on Earth. Preliminary results are positive; we were able to obtain more than 194 zircons that are over 4.0 Ga out of ca. 3800 checked grains, and 9 grains were over 4300 Ma with the oldest at 4371 ± 7 Ma. This separation system by AZS, combined with the new approaches, guarantees much higher yield in the hunt for old zircons.  相似文献   

工业污染与恩格尔系数的库兹涅茨分析——基于面板数据的联立方程模型     

李磊  谢小璐 《地域研究与开发》2014,(5)

基于2000—2010年中国31个省份的工业废水排放总量、工业废气排放总量、工业固体废物排放总量三类指标,适当添加人均可支配收入解释变量。利用面板数据的联立方程个体固定效应模型分析了城镇和农村恩格尔系数分别与污染物排放量之间的环境库兹涅茨曲线(EKC)双向反馈作用关系。由EC-EKC-IP方程的结果表明,工业三废的排放与城镇、农村恩格尔系数之间的关系未必都符合环境库兹涅茨倒U型曲线。因此,必须协调好环境治理与经济增长两者的均衡发展,以达到降低恩格尔系数和减少工业污染的双赢目标。  相似文献   

数字经济对中国经济高质量发展的空间效应与影响路径     

张英浩  汪明峰  刘婷婷 《地理研究》2022,41(7):1826-1844

数字经济已成为推动经济高质量发展和共同富裕的重要抓手。本文梳理数字经济对中国经济高质量发展的影响机制,并构建了创业与创新两条传导路径。基于2011—2018年中国287个地级及以上城市的面板数据集,从时空两个维度对数字经济与经济高质量发展的演变特征进行分析,并运用空间杜宾模型和中介效应模型对其影响过程、机理与空间异质性进行实证检验。结果表明：① 2011—2018年间,中国数字经济和经济高质量发展水平呈现整体提升趋势,但两者均存在明显的时空差异特征。② 数字经济水平的提高有助于本地经济高质量发展,而对邻近地区经济高质量发展没有表现出显著的积极影响,即存在一定的数字隔离。③ 在东部、中部和东北地区,数字经济对经济高质量发展具有显著的积极作用,且在东部地区的影响效果最为明显。数字经济对不同类型城市经济高质量发展的影响程度大致呈现从特大城市到中小城市依次递减的趋势。④ 中介效应模型的结果验证了创业和创新水平是数字经济推动经济高质量发展的中介变量,但同时这种传导效应存在明显的空间异质性。  相似文献   

“双碳”目标下长江中游城市群生态福利绩效演变及驱动机制研究     

朱媛媛  张瑞  顾江  高喆 《地理科学进展》2022,41(12):2231-2243

生态福利绩效是探析自然生态与人类福利关系、衡量生态文明建设的重要工具。论文运用Super-SBM模型测度2005—2020年长江中游城市群市域尺度生态福利绩效,在识别其时空演变特征的基础上,运用面板Tobit模型探讨驱动生态福利绩效演变的因子,最后在“碳达峰、碳中和”目标下揭示其演变的驱动机制。研究发现： ① 2005—2020年长江中游城市群生态福利绩效呈现出“缓慢衰退→波动→快速发展”的演变特征;② 长江中游城市群生态福利绩效总体上呈“核心—外围”态势,武汉城市圈、环长株潭城市群、环鄱阳湖城市群交界处“中部塌陷”特征明显;③ 长江中游城市群生态福利绩效时空演变是在技术进步、环境规制、产业结构、人口集聚、发展共享、对外开放等多因子循环累积和共同推动下形成的,存在内源转化与外源驱动双重作用路径,并且与碳排放强度密切相关。在“双碳”目标下揭示生态福利绩效时空演变及驱动机制,有助于厘清自然生态与人类福利的转化机理以及生态福利绩效与碳排放的作用关系,可为城市群高质量发展和生态文明建设提供参考。  相似文献