Interference of Multiple Strip Footings on Sand Using Small Scale Model Tests   总被引：2，自引：1，他引：1  

Jyant Kumar  Manas Kumar Bhoi 《Geotechnical and Geological Engineering》2008,26(4):469-477

By using small scale model tests, the interference effect on the vertical load-deformation behavior of a number of equally spaced strip footings, placed on the surface of dry sand, was investigated. At any stage, all the footings were assumed to (i) carry exactly equal magnitude of load, and (ii) settle to the same extent. No tilt of the footing was permitted. The effect of clear spacing (s) among footings on the results was explored. A new experimental setup was proposed in which only one footing needs to be employed rather than a number of footings. The bearing capacity increases continuously with decrease in spacing among the footings. The interference effect becomes further prominent with increase in soil friction angle. In contrast to an increase in the bearing capacity, with decrease in spacing of footings, an increase in the footing settlement associated with the ultimate state of shear failure was observed. The present experimental observations were similar to those predicted by the available theory, based on the method of characteristics. As compared to the theory, the present experimental data, however, indicates much greater effect of interference especially for larger spacing among footings.  相似文献   

On longitudinal vibration of an elastic bar in a magnetic field     

Dilip Kumar Sinha 《Pure and Applied Geophysics》1967,67(1):71-75

Summary The equations of elasticity, electromagnetic equations of Maxwell have been applied to investigate the longitudinal vibration of a partly homogenous, partly inhomogeneous elastic bar permeated by a magnetic field.  相似文献   

Rock magnetic records of the sediments of the eastern Arabian Sea: Evidence for late Quaternary climatic change     

A. Anil Kumar  V. Purnachandra Rao  S.K. Patil  Pratima M. Kessarkar  M. Thamban   《Marine Geology》2005,220(1-4):59-82

Rock-magnetic measurements along with grain size, acid-insoluble residue (AIR), organic carbon (OC), CaCO₃ and δ¹⁸O of the planktonic foraminifers of the sediments were determined for 15 gravity cores recovered from the western continental margin of India. Magnetic susceptibility (MS) values in the surficial sediments reflect the land-derived input and, in general, are the highest in terrigenous sediment-dominated sections of the cores off Saurashtra–Ratnagiri, followed by the sediments off Indus–Gulf of Kachchh and then Mangalore–Cape Comorin.

The down-core variations in mineral magnetic parameters reveal that the glacial sediments off the Indus are characterized by low MS values/S-ratios associated with high AIR-content, low OC/CaCO₃ contents and relatively high δ¹⁸O values, while those off SW India are characterized by low MS values/high S-ratio% associated with low AIR content, and relatively high OC, CaCO₃ and δ¹⁸O values. Conversely, the Early Holocene sediments of all cores are characterized by high MS values/S-ratio% associated with high AIR content, low OC, CaCO₃ contents and gradually decreased δ¹⁸O values. These results imply that during the Last Glacial Maximum (LGM), the cores off northwestern India received abundant continental supply leading to the predominance of eolian/fluvial sedimentation. In the SW region the influence of hinterland flux is less evident during this period, but convective mixing associated with the NE monsoon resulted in increased productivity. During the early Holocene intense SW monsoon conditions resulted in high precipitation on land, which in turn contributed increased AIR content/MS values in the continental margin sediments. A shallow water core off Kochi further suggests that the intense SW monsoon conditions prevailed until about 5 ka. The late Holocene organic-rich sediments of the SW margin of India were, however, subjected to early diagenesis at different intervals in the cores. Therefore, caution is needed when interpreting regional climatic change from down-core changes in sediment magnetic properties.  相似文献   

Variations in wave direction estimated using first and second order Fourier coefficients     

V. Sanil Kumar  N. M. Anand 《Ocean Engineering》2004,31(17-18):2105-2119

In most design applications such as alignment of the berthing structure and breakwater alignment, it becomes necessary to determine the direction of design wave. There are two different approaches to determine wave direction. One involves the use of first order Fourier coefficients (mean wave direction) while the other uses second order Fourier coefficients (principal wave direction). Both the average wave direction over the entire frequency range (0.03–0.58 Hz) and the direction corresponding to the peak frequency are used in practice. In the present study, comparison is made on wave directions estimated based on first and second order Fourier coefficients using data collected at four locations in the west and east coasts of India. Study shows that at all locations, the mean and principal wave directions for frequencies ranging from 0.07 to 0.25 Hz (±0.5 times peak frequency) co-vary with a correlation coefficient of 0.99 but at lower and higher frequencies, difference between the parameters is large. Average difference between the mean wave direction at peak frequency and the average over the frequency related to spectral energy more than 20% of maximum value is less, around 13°. Study shows that average difference in the sea and swell directions is around 39°.  相似文献   

Impact of Satellite Altimetry on Simulations of Sea Level Variability by an Indian Ocean Model     

S. K. Singh  Sujit Basu  Raj Kumar  Vijay K. Agarwal 《Marine Geodesy》2001,24(1):53-63

This article describes the impact of satellite altimeter data on the simulations of sea level variability (SLV) by a nonlinear reduced gravity model of the entire Indian Ocean. The model has been forced by 6-hourly analyzed wind stress data containing SSM/I observations and has been able to produce realistic circulation features. However, SLV values observed by Topex/Poseidon altimeter do not fit these simulations because of imperfect initial data. Hence an attempt has been made to initialize the model using altimeter data. The initialized model-generated SLVvalues have been compared with SLV derived by altimeter for monsoon as well as nonmonsoon months of 1996. Experimental runs have been performed for 10 days, 20 days, and one month. It has been found that the initialized model results on the final day of these experiments are in very good agreement with altimeter data of the same day. It is thus possible, in principle, to hindcast and forecast sea level variations in the time scale of 10 days to one month with the availability of good quality wind data for forcing the model and altimeter observations of sea level for initializing it.  相似文献   

On the application of similitude to installation operations of offshore steel jackets     

Subroto Kumar Bhattacharyya 《Applied Ocean Research》1984,6(4):221-226

The role of similitude in scaled simulation of major installation operations of offshore steel jackets, namely, loadout, launching and upending has been studied. The physical modelling can be looked upon both as an adjunct to numerical modelling using computers and also as an independent tool of investigation. The problems of design of models and of experiments are discussed and the prediction equations based on similitude are given.  相似文献   

Parameter identification of a compliant nonlinear SDOF system in random ocean waves by reverse MISO method     

R. Panneer Selvam  S. K. Bhattacharyya   《Ocean Engineering》2001,28(9):33

The determination of the drag and inertia coefficients, which enter into the wave force model given by Morison's equation, is particularly uncertain and difficult when a linear spectral model is used for ocean waves, and the structure is compliant and has nonlinear dynamic response. In this paper, a nonlinear System Identification method, called Reverse Multiple Inputs–Single Output (R–MISO) is applied to identify the hydrodynamic coefficients as well as the nonlinear stiffness parameter for a compliant single-degree-of-freedom system. Four different types of problems have been identified for use in various situations and the R–MISO has been applied to all of them. One of the problems requires iterative solution strategy to identify the parameters. The method has been found to be efficient in predicting the parameters with reasonable accuracy and has the potential for use in the laboratory experiments on compliant nonlinear offshore systems.  相似文献   

印度东南部海岸拉梅斯沃勒姆滨外保克湾底层水特征对底栖有孔虫的影响     

Kumar V  高莉玲 《海洋地质前沿》2001,17(12):13-15

有孔虫生活在海洋和半咸水环境。底栖有孔虫的存在很大程度上受物理因素（深度、温度、光量、水体扰动）、化学因素（盐度、溶解氧和可用元素）和生物因素（食物供给量和底层沉积物特征）的制约。研究人员对印度东、西岸现代底栖有孔虫生态学和分布状态进行了研究。Ｎａｉｄｕ等在对Ｖｉｓａｋｈａｐａｔｎａｍ港复合体有孔虫进行分析后提出 ,可以将有孔虫作为海洋污染的指示物。ＳｒｅｅｎｉｖａｓａＲａｏ等采用Ｑ模式系数分析对尼赞伯德讷姆湾有孔虫的分布进行了研究 ,确认此区域存在４种组合 ,受不同环境条件的影响。Ｋｈａｒｅ等对门格…  相似文献   

Experimental study on loss factor for corrugated plates by bandwidth method     

Nirmal Kumar Mandal  Roslan Abd. Rahman  M. Salman Leong 《Ocean Engineering》2004,31(10):1313-1323

The material loss factor for technically orthotropic plates was measured by half-power bandwidth method. Rectangular and trapezoidal corrugated plates of steel were considered. A simple isotropic steel plate was also considered for comparison of the results. The concept of single degree of freedom system was adopted. The tests were undertaken at very low frequency range (0–100) Hz. The plate models were suspended freely with two wires to minimize or prevent excessive extraneous energy dissipation. Out of plane point force, random in nature was applied to the top middle of the plates and the responses were measured from the middle point of the plates by FFT analyzer using miniature small mass accelerometer as sensor. The aim of these tests is to investigate the effects of bending rigidity and mode orders over material loss factor. The values of estimated modal damping loss factors are compared and tabulated for the plates models considered. Natural frequencies of some of the initial modes of the plates are also presented.It is observed that the higher the value of bending rigidity of the plates, the larger the values of loss factor of it. There was a significant increase in value of loss factor in corrugated plates to that of the isotropic plate.  相似文献   

Comparison of TOPEX/POSEIDON Altimeter Derived Wind Speed and Wave Parameters with Ocean Buoy Data in the North Indian Ocean   总被引：1，自引：0，他引：1  

Jignesh Kshatriya  Abhijit Sarkar  Raj Kumar 《Marine Geodesy》2001,24(3):131-138

Results of comparison exercises carried out between the state-of-the-art TOPEX/POSEIDON altimeter-derived ocean surface wind speed and ocean wave parameters (significant wave height and wave period) and those measured by a set of ocean data buoys in the North Indian Ocean are presented in this article. Altimeter-derived significant wave height values exhibited rms deviation as small as ±0.3 m, and surface wind speed of ±1.6 m/s. These results are found consistent with those found for the Pacific Ocean. For estimation of ocean wave period, the spectral moments-based semiempirical approach, earlier applied on GEOSAT data, was extended to TOPEX/POSEIDON. For this purpose, distributions of first four years of TOPEX/POSEIDON altimeter data and climatology over the North Indian Ocean were analyzed and a new set of coefficients generated for estimation of wave period. It is shown that wave periods thus estimated from TOPEX/POSEIDON data (for the subsequent two years), when compared with independent data set of ocean data buoys deployed in the North Indian Ocean, exhibit improved accuracy (rms ~ ±1.4 nos) over those determined earlier with GEOSAT data.  相似文献