In an attempt to delineate heavy metal contamination precincts and to evaluate the extent and degree of toxic levels, besides
their possible sources, 38 water samples from Ankaleshwar Industrial Estate, south Gujarat, India were analyzed. By clutching
geochemical analyses and GIS-based colour composites areas depicting anomalously high concentration of heavy metals (Mo, Zn,
Pb, Ni, Co, Cd, etc.) in the groundwater were revealed. The multicomponent overlays in grey-scale facilitated in identifying
situates of heavy metal ‘hot spots’, and lateral protuberances of the contamination plume around defile stretch of the main
stream Amla Khadi flowing through the area. The multiple pollution plumes emerging from other parts of the area further coincide
with effluent laden streams and small channels indicating industrial establishments as major sources of groundwater contamination.
Influent nature of the streams, accelerated infiltration process, high mass influx and shallow groundwater table are the factors
conducive for easy access of heavy metals to the phreatic aquifers affecting over 20 km2 area. On the basis of P/U ratios (concentration of metals in polluted water to unpolluted water), geogenic and anthropogenic sources have been identified.
Very high levels of technogenic elements present in the ground water raise concerns about possible migration into food crops,
as the area is an important horticultural locale and is highly cultivated. 相似文献
The 26 December 2004-tsunami has deposited sediments in the Pichavaram mangrove ecosystem, east coast of India. Ten surface
and three core sediment samples were collected within 30 days of the event and analyzed for nutrients. Water samples were
also analyzed to see the impact of tsunami on the geochemical behavior of nutrients. An increase in the concentration of various
nutrients namely nitrate and phosphate was observed. The geochemistry of the mangrove forest was observed to be influenced
by a number of factors like rapid increase of aquaculture farms, agricultural practices and the anthropogenic discharge from
the nearby-inhabited areas. Further the sediment column was disturbed due to energetic tsunami waves, which has caused a sheer
increase in the dissolved oxygen in water. As a result, the change in the redox potential has resulted in change in the nutrients
absorbed/associated with the sediments. In addition, role of retreating water after tsunami on the nutrient geochemistry was
also evaluated. 相似文献
By using small scale model tests, the interference effect on the vertical load-deformation behavior of a number of equally
spaced strip footings, placed on the surface of dry sand, was investigated. At any stage, all the footings were assumed to
(i) carry exactly equal magnitude of load, and (ii) settle to the same extent. No tilt of the footing was permitted. The effect
of clear spacing (s) among footings on the results was explored. A new experimental setup was proposed in which only one footing
needs to be employed rather than a number of footings. The bearing capacity increases continuously with decrease in spacing
among the footings. The interference effect becomes further prominent with increase in soil friction angle. In contrast to
an increase in the bearing capacity, with decrease in spacing of footings, an increase in the footing settlement associated
with the ultimate state of shear failure was observed. The present experimental observations were similar to those predicted
by the available theory, based on the method of characteristics. As compared to the theory, the present experimental data,
however, indicates much greater effect of interference especially for larger spacing among footings. 相似文献
Summary The equations of elasticity, electromagnetic equations of Maxwell have been applied to investigate the longitudinal vibration of a partly homogenous, partly inhomogeneous elastic bar permeated by a magnetic field. 相似文献
Rock-magnetic measurements along with grain size, acid-insoluble residue (AIR), organic carbon (OC), CaCO3 and δ18O of the planktonic foraminifers of the sediments were determined for 15 gravity cores recovered from the western continental margin of India. Magnetic susceptibility (MS) values in the surficial sediments reflect the land-derived input and, in general, are the highest in terrigenous sediment-dominated sections of the cores off Saurashtra–Ratnagiri, followed by the sediments off Indus–Gulf of Kachchh and then Mangalore–Cape Comorin.
The down-core variations in mineral magnetic parameters reveal that the glacial sediments off the Indus are characterized by low MS values/S-ratios associated with high AIR-content, low OC/CaCO3 contents and relatively high δ18O values, while those off SW India are characterized by low MS values/high S-ratio% associated with low AIR content, and relatively high OC, CaCO3 and δ18O values. Conversely, the Early Holocene sediments of all cores are characterized by high MS values/S-ratio% associated with high AIR content, low OC, CaCO3 contents and gradually decreased δ18O values. These results imply that during the Last Glacial Maximum (LGM), the cores off northwestern India received abundant continental supply leading to the predominance of eolian/fluvial sedimentation. In the SW region the influence of hinterland flux is less evident during this period, but convective mixing associated with the NE monsoon resulted in increased productivity. During the early Holocene intense SW monsoon conditions resulted in high precipitation on land, which in turn contributed increased AIR content/MS values in the continental margin sediments. A shallow water core off Kochi further suggests that the intense SW monsoon conditions prevailed until about 5 ka. The late Holocene organic-rich sediments of the SW margin of India were, however, subjected to early diagenesis at different intervals in the cores. Therefore, caution is needed when interpreting regional climatic change from down-core changes in sediment magnetic properties. 相似文献
In most design applications such as alignment of the berthing structure and breakwater alignment, it becomes necessary to determine the direction of design wave. There are two different approaches to determine wave direction. One involves the use of first order Fourier coefficients (mean wave direction) while the other uses second order Fourier coefficients (principal wave direction). Both the average wave direction over the entire frequency range (0.03–0.58 Hz) and the direction corresponding to the peak frequency are used in practice. In the present study, comparison is made on wave directions estimated based on first and second order Fourier coefficients using data collected at four locations in the west and east coasts of India. Study shows that at all locations, the mean and principal wave directions for frequencies ranging from 0.07 to 0.25 Hz (±0.5 times peak frequency) co-vary with a correlation coefficient of 0.99 but at lower and higher frequencies, difference between the parameters is large. Average difference between the mean wave direction at peak frequency and the average over the frequency related to spectral energy more than 20% of maximum value is less, around 13°. Study shows that average difference in the sea and swell directions is around 39°. 相似文献
This article describes the impact of satellite altimeter data on the simulations of sea level variability (SLV) by a nonlinear reduced gravity model of the entire Indian Ocean. The model has been forced by 6-hourly analyzed wind stress data containing SSM/I observations and has been able to produce realistic circulation features. However, SLV values observed by Topex/Poseidon altimeter do not fit these simulations because of imperfect initial data. Hence an attempt has been made to initialize the model using altimeter data. The initialized model-generated SLVvalues have been compared with SLV derived by altimeter for monsoon as well as nonmonsoon months of 1996. Experimental runs have been performed for 10 days, 20 days, and one month. It has been found that the initialized model results on the final day of these experiments are in very good agreement with altimeter data of the same day. It is thus possible, in principle, to hindcast and forecast sea level variations in the time scale of 10 days to one month with the availability of good quality wind data for forcing the model and altimeter observations of sea level for initializing it. 相似文献
The role of similitude in scaled simulation of major installation operations of offshore steel jackets, namely, loadout, launching and upending has been studied. The physical modelling can be looked upon both as an adjunct to numerical modelling using computers and also as an independent tool of investigation. The problems of design of models and of experiments are discussed and the prediction equations based on similitude are given. 相似文献
Excellent station keeping characteristics and relative insensitivity with increasing water depth make triangular tension leg platforms (TLPs) a proven concept in deep water oil exploration. TLPs are often subjected to less probable forces which arise due to collision of ships, icebergs or any other huge sea creature. Dynamic analysis of two triangular TLP models at water depths 1200 and 527.8 m is performed under regular waves along with impulse load acting at an angle of 45 degrees at the TLP column. Hydrodynamic forces on these TLPs are evaluated using modified Morison equation, based on water particle kinematics arrived at using Stokes’ fifth order wave theory. Based on numerical studies conducted, it is seen that impulse loading acting on corner column of TLP significantly affect its response while that acting on pontoons dose not affect TLPs behaviour. 相似文献
AbstractIntra and inter-annual variations in the sea ice thickness are highly sensitive indicators of climatic variations undergoing in the earth’s atmosphere and oceans. This paper describes the method of estimating sea ice thickness using radar waveforms data acquired by SARAL/Altika mission during its drifting orbit phase from July 2016 onwards yielding spatially dense data coverage. Based on statistical analysis of return echoes, classification of the surface has been carried out in three different types, viz. floe, lead and mixed. Time delay correction methods were suitably selected and implemented to make corrections in altimetric range measurements and thereby freeboard. By assuming hydrostatic equilibrium, freeboard data were converted into sea ice thickness. Results show that sea ice thickness varies from 4 to 5?m near ice shelves and 1 to 2.5?m in the marginal sea ice regions. Freeboard and sea ice thickness estimates were also validated using NASA’s Operation Ice Bridge (OIB) datasets. Freeboard measurements show very high correlation (0.97) having RMSE of 0.13. Overestimation of approximately 1–2?m observed in the sea ice thickness, which could be attributed to distance between AltiKa footprint and OIB locations. Moreover, sensitivity analysis shows that snow depth and snow density over sea ice play crucial role in the estimation of sea ice thickness. 相似文献