Intergalactic suprathermal grains     

A. K. Dasgupta 《Astrophysics and Space Science》1981,76(1):119-128

The physical conditions under which suprathermal grains may loose energy and the processes involving the grains (a3×10^–6 cm) destruction are investigated. It is found that the dust grain once attaining the velocityU (10⁵ cm s^–1) may attain suprathermal energy (v _g3×10⁸ cm s^–1) and subsequently may also attain relativistic energy are almost indestructible in the accelerating phase.  相似文献   

The geometry of the Burmese-Andaman subducting lithosphere     

Sujit Dasgupta  Manoj Mukhopadhyay  Auditeya Bhattacharya  Tapan K. Jana 《Journal of Seismology》2003,7(2):155-174

The gross seismotectonic features for the Burmese-Andaman arc system which defines the northeast margin of the Indian plate are rather well known but variations in the subduction zone geometry along and across the arc and fault pattern within the subducting Indian plate have not been studied. Present workaims to study these by using seismicity data whose results are presented in the form of: (a) Lithospheric across-the-arc sections at about every 100–120 km (approximately one degree latitude apart) covering the 3500 km longBurmese-Andaman arc system, (b) a structure contour map showing the depth tothe top surface of the seismically active lithosphere and (c) interpretationof focal mechanism solutions for 148 Benioff zone earthquakes. Both penetrationdepth and the dip of the Benioff zone vary considerably along the arc in correspondence to the curvature of the fold-thrust belt which varies from concave to convex in different sectors of the arc. Several extensive `Hinge faults' that abut at high angles to the arc orientation, are inferred from aninterpretation of the structure contour map. Active nature of the hinge faultsis established in several areas by their association with earthquakes andcorroborated through fault plane solutions. At shallow level of the Benioffzone along these faults, focal mechanism solutions display left lateral strikeslip movement while at deeper levels reverse fault solutions are common.  相似文献   

Cosmic gamma-ray burst from intergalactic relativistic dust grains     

Ajoy Kumar Dasgupta 《Astrophysics and Space Science》1979,63(2):517-523

Charged dust grains of radiia3×10^–63×10^–5 cm may acquire relativistic energy (>10¹⁸ eV) in the intergalactic medium. In order to attain relativistic energy, dust grains have to move in and out (scattering) of the magnetic field of the medium. A relativistic grain of radiusa10^–5 cm with Lorentz factor 10³ approaching the Earth will break up either due to electrostatic charge or due to sputtering about 150100 km, and may scatter solar photons via a fluorescence process. Dust grains may also melt into droplets in the solar vicinity and may contribute towards observed gamma-ray bursts.  相似文献   

Examining the Effect of Ancillary and Derived Geographical Data on Improvement of Per-Pixel Classification Accuracy of Different Landscapes     

Uttam Kumar  Anindita Dasgupta  Chiranjit Mukhopadhyay  T. V. Ramachandra 《Journal of the Indian Society of Remote Sensing》2018,46(3):407-422

Effective conservation and management of natural resources requires up-to-date information of the land cover (LC) types and their dynamics. Multi-resolution remote sensing (RS) data coupled with additional ancillary topographical layers (both remotely acquired or derived from ground measurements) with appropriate classification strategies would be more effective in capturing LC dynamics and changes associated with the natural resources. Ancillary information would make the decision boundaries between the LC classes more widely separable, enabling classification with higher accuracy compared to conventional methods of RS data classification. In this work, we ascertain the possibility of improvement in classification accuracy of RS data with the addition of ancillary and derived geographical layers such as vegetation indices, temperature, digital elevation model, aspect, slope and texture, implemented in three different terrains of varying topography—urbanised landscape (Greater Bangalore), forested landscape (Western Ghats) and rugged terrain (Western Himalaya). The study showed that use of additional spatial ancillary and derived information significantly improved the classification accuracy compared to the classification of only original spectral bands. The analysis revealed that in a highly urbanised area with less vegetation cover and contrasting features, inclusion of elevation and texture increased the overall accuracy of IKONOS data classification to 88.72% (3.5% improvement), and inclusion of temperature, NDVI, EVI, elevation, slope, aspect, Panchromatic band along with texture measures, significantly increased the overall accuracy of Landsat ETM+ data classification to 83.15% (7.6% improvement). In a forested landscape with moderate elevation, temperature was useful in improving the overall accuracy by 6.7 to 88.26%, and in a rugged terrain with temperate climate, temperature, EVI, elevation, slope, aspect and Panchromatic band significantly improved the classification accuracy to 89.97% (10.84% improvement) compared to the classification of only original spectral bands, suggesting selection of appropriate ancillary data depending on the terrain.  相似文献   

Dynamic response of cylindrical structures considering coupled soil-structure interaction under seismic loading     

Indrajit Chowdhury  Ronkoyel Tarafdar  Ambarish Ghosh  Shambhu Pada Dasgupta 《Bulletin of Earthquake Engineering》2016,14(8):2329-2360

This paper attempts to develop a mathematical model for estimating the seismic response of a cylindrical shaped nuclear reactor building resting in an elastic halfspace considering foundation compliance. Most of the research carried out on this topic has either been carried out by resorting to finite element method (FEM) which makes the computational cost expensive or based on the simplifying assumption of assuming the cylindrical structure as a multi degree lumped mass stick model with soil coupled as boundary springs. In the present paper an analytical model has been developed in which the deformation of the cylindrical body (including its shear deformation characteristics) has been taken into cognizance and then coupling with foundation stiffness a comprehensive solution has been sought based on Galerkin’s weighted residual technique. The results are finally compared with FEM to check the reliability of the same. The results are found to be in good agreement with the detailed finite element analysis.  相似文献   

Petrology of a non-classical Barrovian inverted metamorphic sequence from the western Arunachal Himalaya, India   总被引：1，自引：0，他引：1  

S. Goswami  S.K. Bhowmik  S. Dasgupta 《Journal of Asian Earth Sciences》2009,36(4-5):390-406

In this study, we reconstruct the inverted metamorphic sequence in the western Arunachal Himalaya using combined structural and metamorphic analyses of rocks of the Lesser and Greater Himalayan Sequences. Four thrust-bounded stratigraphic units, which from the lower to higher structural heights are (a) the Gondwana rocks and relatively weakly deformed metasediments of the Bomdila Group, (b) the tectonically interleaved sequence of Bomdila gneiss and Bomdila Group, (c) the Dirang Formation and (d) the Se La Group are exposed along the transect, Jira–Rupa–Bomdila–Dirang–Se La Pass. The Main Central thrust, which coincides with intense strain localization and the first appearance of kyanite-grade partial melt is placed at the base of the Se La Group.Five metamorphic zones from garnet through kyanite, kyanite migmatite, kyanite-sillimanite migmatite to K-feldspar-kyanite-sillimanite migmatites are sequentially developed in the metamorphosed low-alumina pelites of Dirang and Se La Group, with increasing structural heights. Three phases of deformation, D₁–D₂–D₃ and two groups of planar structures, S₁ and S₂ are recognized, and S₂ is the most pervasive one. Mineral growths in all these zones are dominantly late-to post-D₂, excepting in some garnet-zone rocks, where syn-D₁ garnet growths are documented. Metamorphic isograds, which are aligned parallel to S₂ were subsequently folded during D₃. The deformation produced plane-non-cylindrical fold along NW–SE axis.In the garnet-zone, peak metamorphism is marked by garnet growth through the reaction biotite + plagioclase → garnet + muscovite. An even earlier phase of syn-D₁ garnet growth occurred in the chlorite stability field with or without epidote. In the kyanite-zone metapelites, kyanite appeared via the pressure-sensitive reaction, garnet + muscovite → kyanite + biotite + quartz. Staurolite was produced in the same rock by retrograde replacement of kyanite following the reaction, garnet + kyanite + H₂O → staurolite + quartz. These reactions depart from the classical kyanite- and staurolite-isograd reactions in low-alumina pelites, encountered in other segments of eastern Himalaya. In the metapelites, just above the kyanite-zone, melting begins in the kyanite field, through water-saturated and water-undersaturated melting of paragonite component in white mica. Leucosomes formed through these reactions are characteristically free of K-feldspar, with sodic plagioclase and quartz as the dominant constituents. With increasing structural height, the melting shifts to water-undersaturated melting of muscovite component of white mica, producing an early K-feldspar + kyanite and later K-feldspar + sillimanite assemblages and granitic leucosomes.Applications of conventional geothermobarometry and average P–T method reveal near isobaric (at P  8 kbar) increase in peak metamorphic temperatures from 550 °C in the garnet-zone to >700 °C for K-feldspar-kyanite-sillimanite-zone rocks. The findings of near isobaric metamorphic field gradient and by the reconstruction of the reaction history, reveal that the described inverted metamorphic sequence in the western Arunachal Himalaya, deviates from the classical Barrovian-type metamorphism. The tectonic implication of such a metamorphic evolution is discussed.  相似文献   

Analysis and numerical simulation of the meteorological observations at a tropical coastal site Chennai in India     

R. Venkatesan  M. Rajendran  Sikha Dasgupta 《Atmospheric Research》2009,92(4):505-521

Meteorological measurements were carried out at North Chennai semi rural area during pre-monsoon period as a part of an air quality study program. Analysis of the data showed the effects of coastal terrain namely the land-sea breeze circulation, temperature cooling during the sea breeze, difference in onset times at these sites etc. Sea breeze onset was observed with a sharp turning of the wind from westerly to south easterly associated with rise in wind speed. Advection speed of the front was about 2.0 m s^− 1. A simple mesoscale meteorological model (MAM-I) developed at Kalpakkam for coastal atmospheric dispersion estimation was used to simulate the observed characteristics. All the major features observed could be simulated by the model while significant difference was noticed in sea breeze frontal movement. MAM results were also inter-compared with MM5. There were no significant differences in the estimate of mean parameters by both the models. It is concluded that the simple model, which takes less run time in a desktop PC, is adequate enough for practical application of providing wind field for plume dispersion models at coastal sites.  相似文献   

A megacity in a changing climate: the case of Kolkata     

Susmita Dasgupta  Asvani K. Gosain  Sandhya Rao  Subhendu Roy  Maria Sarraf 《Climatic change》2013,116(3-4):747-766

Projections by the Intergovernmental Panel on Climate Change suggest that there will be an increase in the frequency and intensity of climate extremes in the 21st century. Kolkata, a megacity in India, has been singled out as one of the urban centers vulnerable to climate risks. Modest flooding during monsoons at high tide in the Hooghly River is a recurring hazard in Kolkata. More intense rainfall, riverine flooding, sea level rise, and coastal storm surges in a changing climate can lead to widespread and severe flooding and bring the city to a standstill for several days. Using rainfall data, high and low emissions scenarios, and sea level rise of 27 cm by 2050, this paper assesses the vulnerability of Kolkata to increasingly intense precipitation events for return periods of 30, 50, and 100 years. It makes location-specific inundation depth and duration projections using hydrological, hydraulic, and urban storm models with geographic overlays. High resolution spatial analysis provides a roadmap for designing adaptation schemes to minimize the impacts of climate change. The modeling results show that de-silting of the main sewers would reduce vulnerable population estimates by at least 5 %.  相似文献   

Cosmic acceleration in non-canonical scalar field model: an interacting scenario     

Sudipta Das  Abdulla Al Mamon 《Astrophysics and Space Science》2015,355(2):371-380

  相似文献   

Potential source zones for Himalayan earthquakes: constraints from spatial�Ctemporal clusters     

Basab Mukhopadhyay  Anshuman Acharyya  Sujit Dasgupta 《Natural Hazards》2011,57(2):369-383

The Himalayan fold-thrust belt has been visited by many disastrous earthquakes (magnitude > 6) time and again. This active collisional orogen bordering Indian subcontinent in the north remains a potential seismic threat of similar magnitude in the adjoining countries like India, Pakistan, Nepal, Bhutan and China. Though earthquake forecasting is riddled with all conjectures and still not a proven presumption, identifying likely source zones of such disastrous earthquakes would be an important contribution to seismic hazard assessment. In this study, we have worked out spatio-temporal clustering of earthquakes (Mb ?? 4.5; 1964?C2006) in the Himalayas. ??Point density?? spatial statistics has helped in detecting 22 spatial seismicity clusters. Earthquake catalog is then treated with a moving time-distance window technique (inter-event time 35 days and distance 100 ± 20 km) to bring out temporal clusters by recognizing several foreshock-main shock-aftershock (FMA) sequences. A total of 53 such temporal sequences identified in the process are confined within the 22 spatial clusters. Though each of these spatio-temporal clusters deserves in-depth analysis, we short-listed only eight such clusters that are dissected by active tectonic discontinuities like MBT/MCT for detail study. Spatio-temporal clusters have been used to constrain the potential source zones. These eight well-defined spatio-temporal clusters demonstrate recurrent moderate to large earthquakes. We assumed that the length of these clusters are indicating the possible maximum rupture lengths and thus empirically estimated the maximum possible magnitudes of eight clusters that can be generated from them (from west to east) as 8.0, 8.3, 8.2, 8.3, 8.2, 8.4, 8.0 and 7.7. Based on comparative study of the eight cluster zones contemplating with their temporal recurrences, historical seismic records, presence of intersecting faults and estimated magnitudes, we have guessed the possibility that Kangra, East Nepal, Garhwal and Kumaun?CWest Nepal clusters, in decreasing order of earthquake threat, are potential source zones for large earthquakes (??7.7 M) in future.  相似文献