Numerical determination of pressure-dependent effective thermal conductivity in Berea sandstone     

Mirko Siegert  Marcel Gurris  Claudia Finger  Erik H. Saenger 《Geophysical Prospecting》2022,70(1):152-172

In this paper, the methods of digital rock physics are applied to determine pressure-dependent effective thermal conductivity in rock samples. Simulations are performed with an in-house three-dimensional finite volume code. In the first step, four numerical models are derived from a given tomographic scan of Berea sandstone. Consequently, simulations of the thermal conductivity at ambient conditions are performed and validated with experimental data. In a second step, a new workflow for the determination of the pressure-dependent thermal conductivity in rock samples is elaborated, tested and calibrated. Results originating from the derived workflow show very good agreement with experimental data.  相似文献   

Spalling Experiments on Large Hard Rock Specimens     

Lars?JacobssonEmail author  Karin?Appelquist  Jan?Erik?Lindkvist 《Rock Mechanics and Rock Engineering》2015,48(4):1485-1503

Specimens of coarse-grained Äspö diorite were axially compressed to observe stress-induced spalling. The specimens had a novel design characterized by two manufactured large radius notches on opposite sides. The tangential stress occurring in the notches aimed to represent the tangential loading around a circular opening. Fracture stages were monitored by acoustic emission measurements. Rock chips were formed similar to those found in situ, which indicates a similar fracture process. Slabs were cut out from the specimens and impregnated using a fluorescent material to visualize the cracks. The cracks were subsequently examined by the naked eye and by means of microscopy images, from which fracture paths could be identified and related to different minerals and their crystallographic orientations. The microscopy analyses showed how the stress field and the microstructure interact. Parallel cracks were formed 2–4 mm below the surface, sub-parallel to the direction of the maximum principal stress. The crack initiation, the roles of minerals such as feldspar, biotite and quartz and their grain boundaries and crystallographic directions are thoroughly studied and discussed in this paper. Scale effects, which relate to the stress gradient and microstructure, are discussed.  相似文献   

The most frequent interfaces in olivine aggregates: the GBCD and its importance for grain boundary related processes     

Katharina?MarquardtEmail author  Gregory?S.?Rohrer  Luiz?Morales  Erik?Rybacki  Hauke?Marquardt  Brian?Lin 《Contributions to Mineralogy and Petrology》2015,170(4):40

Rocks consist of crystal grains separated by grain boundaries that impact the bulk rock properties. Recent studies on metals and ceramics showed that the grain boundary plane orientation is more significant for grain boundary properties than other characteristics such as the sigma value or disorientation (in the Earth’s science community more frequently termed misorientation). We determined the grain boundary character distribution (GBCD) of synthetic and natural polycrystalline olivine, the most abundant mineral of Earth’s upper mantle. We show that grain boundaries of olivine preferentially contain low index planes, in agreement with recent findings on other oxides (e.g. MgO, TiO₂, Al₂O₃ etc.). Furthermore, we find evidence for a preferred orientation relationship of 90° disorientations about the [001] direction forming tilt and twist grain boundaries, as well as a preference for the 60° disorientation about the [100] axis. Our data indicate that the GBCD, which is an intrinsic property of any mineral aggregate, is fundamental for understanding and predicting grain boundary related processes.  相似文献   

Recent progress in the operational forecasting of summer severe weather     

Paul Joe  Cliff Crozier  Norman Donaldson  Dave Etkin  Erik Brun  Steve Clodman 《大气与海洋》2013,51(2):249-302

Abstract

Summer severe weather (SSW) can strike suddenly and unexpectedly with disastrous consequences for human activity. Considerable progress has been made in the past ten years in the operational forecasting of SSW. Traditionally, SSW was defined to consist of tornadoes, strong winds, hail, lightning and heavy rain. Hazardous types of strong winds have recently been expanded to include microbursts, macrobursts and surfacing rear inflow jet damage behind mesoscale convective systems. Doppler radar was used to relate surface damage to the appropriate atmospheric phenomena, first diagnostically and then prognostically. This improvement in classification has fedback to and improved the forecast process. Concurrent progress has been made in the use of synoptic observations. The concept of helical wind profiles and improved knowledge of the role of dry mid‐level air has improved the forecasting of tornadoes and strong gusty winds. Moisture flux convergence, derived from surface measurements, shows great promise in identifying areas of storm initiation. Satellite imagery has been used to identify dynamical atmospheric boundaries. Numerical modelling of the interaction of environmental wind profiles and individual thunderstorms has greatly contributed to the understanding of SSW. Studies of spatial and temporal patterns of lightning, both specific cases and climatology, contribute to the forecasting of severe storms. Polarization radar results have shown progress in separating the signals of hail from those of rain and in the improved measurement of heavy rainfalls. Radar observation of clear air boundaries and their interactions show potential for the forecasting of thunderstorm initiation. Though not traditionally considered part of SSW, hurricanes that evolve into extra‐tropical storms share many of the same hazardous features. The progress in computing, communications and display technologies has also made substantial contributions to operational forecasting and to the dissemination of weather warnings.  相似文献   

The Euro-Atlantic Circulation Response to the Madden-Julian Oscillation Cycle of Tropical Heating: Coupled GCM Intervention Experiments     

Priyanka Yadav  David M. Straus  Erik T. Swenson 《大气与海洋》2013,51(3):161-181

Abstract

Intervention experiments using the Coupled Forecast System model, version 2 (CFSv2), have been performed in which various Madden-Julian Oscillation (MJO) evolutions were added to the model’s internally generated heating: Slow Repeated Cycles, Slow Single Cycle, Fast Repeated Cycles, and Fast Single Cycle. In each experiment, one of these specified MJO evolutions of tropical diabatic heating was added in multiple ensemble reforecasts of boreal winter (1 November to 31 March for 31 winters: 1980–2010). Since in each experiment, multiple re-forecasts were made with the identical heating evolution added, predictable component analysis is used to identify modes with the highest signal-to-noise ratio. Traditional MJO-phase analysis of total model heating (dominated by internally generated heating) shows that the MJO-related heating structure compares well with heating estimated from observed fast and slow episodes; however, the model heating is larger by a factor of two. The evolution of Euro-Atlantic circulation regimes indicates a clear response due to the added heating, with a robust increase in the frequency of occurrence of the negative phase of the North Atlantic Oscillation (NAO?) after the heating crosses into the Pacific and a somewhat less robust increase in the positive phase of the NAO (NAO+) following Indian Ocean heating. In the Fast Cycle experiments, the model response is somewhat muted compared with the Slow Cycle experiments. The Scandinavian Blocking regime becomes more frequent prior to the NAO? regime. The two leading modes in the predictable component analysis of 300?hPa height (Z300), synoptic scale feedback (DZ300), and planetary wave diabatic heating in all experiments form an oscillatory pair with high statistical significance. The oscillatory pair represents the cyclic response to the particular MJO signal (Fast or Slow, Single, or Repeated Cycles) in each case. The period is about 64 days for the Slow Cycle and 36 days for the Fast Cycle, consistent with the imposed periods. The time series of one of the leading modes of Z300 is highly anti-correlated with the frequency of occurrence of the NAO– in the Repeated Cycle experiments. A clear cycle involving the Z300 and DZ300 leading modes is identified.  相似文献   

Technology transfer by CDM projects     

Erik Haites  Maosheng Duan  Stephen Seres 《Climate Policy》2013,13(3):327-344

Abstract

Technology development and transfer is an important feature of both the United Nations Framework Convention on Climate Change (UNFCCC) and its Kyoto Protocol. Although the Clean Development Mechanism (CDM) does not have an explicit technology transfer mandate, it may contribute to technology transfer by financing emission reduction projects using technologies currently not available in the host countries. This article analyses the claims about technology transfer made by CDM project participants in their project design documents. Roughly one-third of all CDM projects, accounting for almost two-thirds of the annual emission reductions, involve technology transfer. Technology transfer varies widely across project types and is more common for larger projects and projects with foreign participants. Equipment transfer is more common for larger projects, while smaller projects involve transfers of both equipment and knowledge or of knowledge alone. Technology transfer does not appear to be closely related to country size or per-capita GDP, but a host country can influence the extent of technology transfer involved in its CDM projects.  相似文献   

Erratum to “The formation of asteroid satellites in large impacts: results from numerical simulations”: [Icarus 167 (2004) 382-396]     

Daniel D. Durda  William F. Bottke Jr.  Brian L. Enke  William J. Merline  Erik Asphaug  Derek C. Richardson  Zoë M. Leinhardt 《Icarus》2004,170(1):242

  相似文献   

Large impact features on middle-sized icy satellites     

Jeffrey M. Moore  Paul M. Schenk  Erik Asphaug 《Icarus》2004,171(2):421-443

All of the large impact features of the middle-sized icy satellites of Saturn and Uranus that were clearly observed by the Voyager spacecraft are described. New image mosaics and stereo-and-photoclinometrically-derived digital elevation models are presented. Landforms related to large impact features, such as secondary craters and possible antipodal effects are examined and evaluated. Of the large impacts, Odysseus on Tethys appears to have had the most profound effect on its “target” satellite of any of the impact features we examined. Our modeling suggests that the Odysseus impact may have caused the prompt formation of Ithaca Chasma, a belt of tectonic troughs that roughly follow a great circle normal to the center of Odysseus, although other hypotheses remain viable. We identify probable secondary cratering from Tirawa on Rhea. We attribute a number of converging coalescing crater chains on Rhea to a putative, possibly relatively fresh, ∼350 km-diameter impact feature. We examine the antipodes of Odysseus, the putative ∼350 km-diameter Rhean impact feature, and Tirawa, and conclude that evidence from Voyager data for damage from seismic focusing is equivocal, although our modeling results indicate that such damage may have occurred. We propose a number of observations and tests for Cassini that offer the opportunity to differentiate among the various explanations and speculations reviewed and evaluated in this study.  相似文献   

Cartography     

Erik Arnberger 《GeoJournal》1982,6(3):199-200

  相似文献   

Barium anomaly in the Cambrian-Vendian aquifer system in North Estonia     

Andres?MarandiEmail author  Enn?Karro  Erik?Puura 《Environmental Geology》2004,47(1):132-139

A barium anomaly with a maximum Ba²⁺ concentration of 6.37 mg/l was distinguished in a Cambrian-Vendian (Cm-V) aquifer system that is widely used as a drinking water source in the towns Kunda, Rakvere and Kohtla-Järve of North-Estonia. The modelling results show that at low sulphate concentrations (below 3 mg/l) Ba²⁺ contents can exceed the limit values for drinking water (such as 2 mg/l set by US EPA). Bicarbonate ions in their common concentration range in groundwater cannot limit Ba²⁺ at its content below 10 mg/l. The probable natural sources of the anomaly are the crystalline basement and its weathering zone. Groundwater in the clayey weathering core is hydraulically connected with the overlying Cm-V aquifer system, thus the upconing of deeper-seated groundwater, caused by intensive exploitation of wells, is possible.  相似文献