Influence of the zone of weakness on dip angle and shear heating of subducted slabs     

Martin Kuka?ka  Ctirad Matyska 《Physics of the Earth and Planetary Interiors》2004,141(4):243-252

We study the importance of the zones of weakness and the pattern of downgoing flow in steady-state models of subducting lithosphere, which interacts mechanically and thermally with the ambient mantle. The non-linear system of governing equations consists of (i) the momentum equation in stream function formulation and (ii) the steady-state heat transfer equation including conduction and advection of heat and dissipation. A finite element method has been applied to this system. We consider the viscosity to be a non-linear function of both the temperature and the stream function. In steady-state two-dimensional (2D) flow, the stream function isolines follow material trajectories. They are used to follow the top of the subducting slab, which because of its possible increase in water content, is assumed to have a lower viscosity. The zone of weakness has been thus obtained in the self-consistent fashion since the stream function as well as the temperature are the output from our modeling and no a priori assumptions about the shape of the bending lithosphere are taken into account. It was shown that several orders decrease of viscosity in the zone of weakness is required to obtain the dip angle of about 45°. If the decrease of viscosity is not sufficient enough, the subducted slab either sinks almost vertically or does not exhibit a plate-like behavior. We have also demonstrated that shear heating can unrealistically increase at the zone of weakness for fast subductions if decrease of viscosity is underestimated.  相似文献   

A Modeling Study of the Effects of Anomalous Snow Cover over the Tibetan Plateau upon the South Asian Summer Monsoon   总被引：1，自引：0，他引：1  

刘华强  孙照渤王举 闵锦忠 《大气科学进展》2004,21(6):964-975

The effect of anomalous snow cover over the Tibetan Plateau upon the South Asian summer monsoon is investigated by numerical simulations using the NCAR regional climate model (RegCM2) into which gravity wave drag has been introduced. The simulations adopt relatively realistic snow mass forcings based on Scanning Multi-channel Microwave Radiometer (SNINIR) pentad snow depth data. The physical mechanism and spatial structure of the sensitivity of the South Asian early summer monsoon to snow cover anomaly over the Tibetan Plateau are revealed. The main results are summarized as follows. The heavier than normal snow cover over the Plateau can obviously reduce the shortwave radiation absorbed by surface through the albedo effect, which is compensated by weaker upward sensible heat flux associated with colder surface temperature, whereas the effects of snow melting and evaporation are relatively smaller.The anomalies of surface heat fluxes can last until June and become unobvious in July. The decrease of the Plateau surface temperature caused by heavier snow cover reaches its maximum value from late April to early May. The atmospheric cooling in the mid-upper troposphere over the Plateau and its surrounding areas is most obvious in May and can keep a fairly strong intensity in June. In contrast, there is warming to the south of the Plateau in the mid-lower troposphere from April to June with a maximum value in May.The heavier snow cover over the Plateau can reduce the intensity of the South Asian summer monsoon and rainfall to some extent, but this influence is only obvious in early summer and almost disappears in later stages.  相似文献   

A GIS Analysis to Evaluate Areas Suitable for Crushed Stone Aggregate Quarries in New England,USA     

Robinson  Gilpin R.  Kapo  Katherine E.  Raines  Gary L. 《Natural Resources Research》2004,13(3):143-159

Aggregate is a low unit-value mineral commodity. Costs to move aggregate from the mine site to the point of use is a large fraction of the resource cost to users. Production sites for aggregate occur where suitable source materials exist and where transportation and market conditions are favorable. The increasing demand for aggregate and the difficulty of developing and permitting new sites and of renewal of permits on existing sites of aggregate production indicates that aggregate will be supplied from sources yet to be developed or delineated in many areas. Site development and permitting for aggregate production is difficult because many land management plans and zoning actions fail to anticipate prospective source areas for aggregate in a way that is consistent with both the source rock quality and the transportation and socioeconomic factors that define the economic viability of the industry. Spatial analysis provides a method to integrate both geology and economic (transportation and marketplace) parameters in a regional model. Weights of evidence (WofE) analysis has been used to measure the spatial correlation of geologic map, transportation network, and population data with current production sites for crushed stone aggregate in the New England region of the northeastern United States. Weighted logistic regression (WLR) is used with the WofE results to rank areas in terms of their relative suitability for production of crushed stone. Spatial analysis indicates that 85% of the 106 crushed stone aggregate quarries in New England are sited within 1.6 km (1 mile) of either a principal highway or rail line in the region. Seventy-eight percent of crushed stone aggregate quarries are sited in census tracts with population densities exceeding 100 people/mile². These relations illustrate the importance of proximity to both transportation corridors and developing areas where aggregate is predominately used. Only one active crushed stone quarry is located in a census tract with a population density less than 15 people/mile², reflecting the lack of sufficient market demand in many rural areas to develop an operation there. However, since 1990, almost all new quarries have been developed in census tracts with population densities less than 200 people/mile², indicating the difficulty of permitting new quarry sites in highly populated areas. Crushed stone aggregate is produced predominately from three hard rock types that are distributed widely in New England; 28% of sites use granitic rock, 25% use carbonate rocks, and 25% use mafic rock types that are categorized as trap rock by the aggregate industry. The other crushed stone aggregate sources include a variety of fine-grained metamorphic rock types. Carbonate rocks and Jurassic basalt (the primary trap rock source) are the most prevalent source rocks on an area-weighted basis. Spatial analysis can be used on a regional scale to rank areas by their relative suitabilityfor crushed stone aggregate production based on geology, transportation, and population parameters. The results of this regional analysis can identify areas for more detailed evaluation. As transportation or population features change, the model can be revised easily to reflect these changes.  相似文献   

Tetrahedral Plots of the Phase Relations for Basalts     

Sven Maal?e  Richard N. Abbott Jr. 《Mathematical Geology》2005,37(8):869-893

The phase relations of quaternary systems are generally represented by projections onto ternary compositional planes. Such projections often obscure relationships that would only be evident in a three-dimensional tetrahedral plot. The tetrahedral plot requires that compositions of the minerals and melts be transformed into Cartesian coordinates. It is shown here how this transformation is carried out. The application is demonstrated by tetrahedral plots of experimental melt compositions of partially molten lherzolite. Furthermore, the plot can be used to evaluate whether or not a particular basaltic composition represents a primary melt. The methods are applicable to any four-component system.  相似文献   

Evaluating soil moisture estimation from ground-penetrating radar hyperbola fitting with respect to a systematic time-domain reflectometry data collection in a boreal podzolic agricultural field     

Chameera Illawathure  Gary Parkin  Sébastien Lambot  Lakshman Galagedara 《水文研究》2020,34(6):1428-1445

The upper 30 cm of the soil profile, which hosts the majority of the root biomass, can be considered as the shallow agricultural root zone of most temperate crops. The electromagnetic wave velocity in the soil obtained from reflection hyperbolas in ground-penetrating radar (GPR) data can be used to estimate soil moisture (SM). Finding shallow hyperbolas in a radargram and minimizing the subjective error associated with the hyperbola fitting are the main challenges in this approach. Nevertheless, we were motivated by the recent improvements of hyperbola fitting algorithms, which can reduce the subjective error and processing time. To overcome the difficulty of finding very shallow hyperbolas, we applied the hyperbola fitting method to reflections ranging from 27- to 50-cm depth using a 500-MHz centre-frequency GPR and compared the estimated moisture with vertically installed, 30-cm-long time-domain reflectometry (TDR) sensors. We also compared TDR and GPR sample areas in a 2-D plane using different GPR survey types and different hyperbola depths. SM measured with TDR and GPR were not significantly different according to Mann–Whitney's test. Our analyses showed that a root mean square error of 0.03 m³ m⁻³ was found between the two methods. In conclusion, the proposed method might be suitable to estimate SM with an acceptable accuracy within the root zone if the soil profile is fairly uniform within the application depth range.  相似文献   

Implications of measurement metrics on soil freezing curves: A simulation of freeze–thaw hysteresis     

Renato Pardo Lara  Aaron A. Berg  Jon Warland  Gary Parkin 《水文研究》2021,35(7):e14269

Soil freeze–thaw events have important implications for water resources, flood risk, land productivity, and climate change. A property of these phenomena is the relationship between unfrozen water content and sub-freezing temperature, known as the soil freezing characteristic curve (SFC). It is documented that this relationship exhibits hysteretic behaviour when frozen soil thaws, leading to the definition of the soil thawing characteristic curve (STC). Although explanations have been given for SFC/STC hysteresis, the effect that ‘scale’ – particularly ‘measurement scale’ – may have on these curves has received little attention. The most commonly used measurement scale metric is the ‘support’, which is the spatial (or temporal) unit within which the measured variable is integrated or soil volume sampled. We show (a) measurement support can influence the range and shape of the SFC and (b) hysteresis can be attributed, in part, to the support and location of the measurements comprising the SFC/STC. We simulated lab measured temperature, volumetric water content (VWC), and permittivity from soil samples undergoing freeze–thaw transitions using Hydrus-1D and a modified Dobson permittivity model. To assess the effect of measurement support and location on SFC/STC, we masked the simulated temperature and VWC/permittivity extent to match the instrument's support and location. By creating a detailed simulation of the intra- and inter-support variability associated with the penetration of a freezing front, we demonstrate how measurement support and location can influence the temperature range over which water freezing events are captured. We show it is possible to simulate hysteresis in homogenous media with purely geometric considerations, suggesting that SFC/STC hysteresis may be more of an apparent phenomenon than mechanistically real. Lastly, we develop an understanding of how the location and support of soil temperature and VWC/permittivity measurements influence the temperature range over which water freezing events are captured.  相似文献   

The synoptic‐ and planetary‐scale signatures of precipitating systems over the Mackenzie River Basin     

Gary M. Lackmann  John R. Gyakum 《大气与海洋》2013,51(4):647-674

Abstract

The synoptic‐ and planetary‐scale signatures of precipitating systems over the Mackenzie River Basin (MRB) are elucidated using composites based on a 28‐year sample of widespread precipitation events. These wet events are defined as days on which 5 or more of 12 surface stations in the MRB receive at least 2.5 mm of precipitation. Seasonal composites based on a total of 600 wet events reveal a sequence of statistically significant flow anomalies. Examination of individual wet events motivates stratification of the seasonal samples according to sea‐level pressure distribution. One evolution that is particularly common during fall, winter and spring involves lee cyclogenesis over the southern MRB in association with a strong cyclone over the Gulf of Alaska; such events are dubbed Gulf Redevelopment (GR) cases. A composite based on 59 wintertime GR events indicates upslope flow north of the lee cyclone and warm advection along an east‐west oriented warm front during the precipitation event. Composites of the Q‐vector and the divergence of this field confirm the presence of quasigeostrophic (QG) forcing for ascent over the MRB during this period. A thermally indirect “topographic tilting” mechanism, involving downs‐lope warming over the southern MRB and upslope cooling to the north, is hypothesized to increase warm‐frontal baroclinicity over the MRB. The GR composite 500 hPa geopotential height anomaly pattern is characterized by a series of anomalies extending from the Bering Sea to the Gulf of Mexico. The western (eastern) anomalies tend to decay (amplify) with time. The composite exhibits a positive anomaly over the Bering Sea, a negative anomaly over the Gulf of Alaska that moves eastward into the MRB during the precipitation event, and a positive anomaly that moves eastward over western and central North America. The presence of large, slow‐moving flow anomalies and an extended period of enhanced southwesterly geostrophic flow over the MRB in the composite suggests that a persistent influx of Pacific moisture is required to moisten the atmosphere over the MRB sufficiently for widespread precipitation. An independent composite of dry MRB cyclone events exhibits substantially weaker southwesterly geostrophic flow into the MRB relative to the wet GR composite.  相似文献   

Editorial Introduction     

Gary Huckleberry  Jamie Woodward 《Geoarchaeology》2015,30(3):165-166

  相似文献   

Spatially controlled Fe and Si isotope variations: an alternative view on the formation of the Torres del Paine pluton     

Norbert?A.?GajosEmail author  Craig?C.?Lundstrom  Alexander?H.?Taylor 《Contributions to Mineralogy and Petrology》2016,171(11):93

We present new Fe and Si isotope ratio data for the Torres del Paine igneous complex in southern Chile. The multi-composition pluton consists of an approximately 1 km vertical exposure of homogenous granite overlying a contemporaneous 250-m-thick mafic gabbro suite. This first-of-its-kind spatially dependent Fe and Si isotope investigation of a convergent margin-related pluton aims to understand the nature of granite and silicic igneous rock formation. Results collected by MC-ICP-MS show a trend of increasing δ⁵⁶Fe and δ³⁰Si with increasing silica content as well as a systematic increase in δ⁵⁶Fe away from the mafic base of the pluton. The marginal Torres del Paine granites have heavier Fe isotope signatures (δ⁵⁶Fe = +0.25 ± 0.02 2se) compared to granites found in the interior pluton (δ⁵⁶Fe = +0.17 ± 0.02 2se). Cerro Toro country rock values are isotopically light in both Fe and Si isotopic systems (δ⁵⁶Fe = +0.05 ± 0.02 ‰; δ³⁰Si = ?0.38 ± 0.07 ‰). The variations in the Fe and Si isotopic data cannot be accounted for by local assimilation of the wall rocks, in situ fractional crystallization, late-stage fluid exsolution or some combination of these processes. Instead, we conclude that thermal diffusion or source magma variation is the most likely process producing Fe isotope ratio variations in the Torres del Paine pluton.  相似文献   

封面及目录     

本刊编辑部 《岩矿测试》2016,35(4):I-IV

  相似文献