The Application of Telemetry to Large-Scale Horizontal Anisotropic Permeability Determinations by Surface Tiltmeter Survey     

Walter W. Loo  Klaus Franz  Gary R. Holzhausen 《Ground Water Monitoring & Remediation》1984,4(4):124-130

An advanced two-way radio link (transceiver units) and data logging system have provided a powerful means of real-time series data collection and analysis. The application of this telemetry system to surface tiltmeter surveys provides significant cost savings for testing and analysis of deep, large-scale horizontal anisotropic permeability and heterogeneity determinations.
The determination of horizontal anisotropic properties requires one pumping well and eight to 10 tiltmeter monitoring stations. The validity of the depth of the test may reach 4,000 feet below land surface. With the addition of one partially penetrating observation well, the entire three-dimensional anisotropic permeability can be determined. With the addition of a fully penetrating well, the storage coefficient can be determined as well as leakage property (including vertical permeability of the confining layers). An example test case was analyzed for horizontal anisotropic permeability with remarkable success despite relatively unfavorable detection conditions.
A thorough understanding of the geology overlying the aquifer system must be made in order to assess the applicability of the surface tiltmeter survey to large-scale horizontal anisotropic permeability determinations.  相似文献   

Book reviews     

Malcolm H. Taylor  Gary R. Gaston 《Estuaries and Coasts》1986,9(2):153-154

  相似文献   

High latitude river runoff in a doubled CO2 climate     

Scott C. Van Blarcum  James R. Miller  Gary L. Russell 《Climatic change》1995,30(1):7-26

A global atmospheric model is used to calculate the monthly river flow for nine of the world's major high latitude rivers for the present climate and for a doubled CO₂ climate. The model has a horizontal resolution of 4° × 5°, but the model's runoff from each grid box is quartered and added to the appropriate river drainage basin on a 2° × 2.5° resolution. A routing scheme is used to move runoff from a grid box to its neighboring downstream grid box and ultimately to the mouth of the river. In a model simulation in which atmospheric carbon dioxide is doubled, mean annual precipitation and river flow increase for all of these rivers, increased outflow at the river mouths begins earlier in the spring, and the maximum outflow occurs approximately one month sooner due to an earlier snow melt season. In the doubled CO₂ climate, snow mass decreases for the Yukon and Mackenzie rivers in North America and for rivers in northwestern Asia, but snow mass increases for rivers in northeastern Asia.  相似文献   

Characteristics of hydrothermal plumes from two vent fields on the Juan de Fuca Ridge, northeast Pacific Ocean   总被引：1，自引：0，他引：1  

Edward T. Baker  Gary J. Massoth 《Earth and Planetary Science Letters》1987,85(1-3)

Deep CTD/transmissometer tows and water bottle sampling were used during 1985 to map the regional distribution of the neutrally-buoyant plumes emanating from each of two major vent fields on the Southern Symmetrical Segment (SSS) and Endeavour Segment (ES) of the Juan de Fuca Ridge. At both vent fields, emissions from point and diffuse hydrothermal sources coalesced into a single 200-m-thick plume elongated in the direction of current flow and with characteristic temperature anomalies of 0.02–0.05°C and light-attenuation anomalies of 0.01–0.08 m⁻¹ (10–80 μg/l above background). Temperature anomalies in the core of each plume were uniform as far downcurrent as the plumes were mapped (10–15 km). Downcurrent light-attenuation trends were non-uniform and differed between plumes, apparently because different vent fluid chemistries at each field cause significant differences in the settling characteristics of the hydrothermal precipitates. Vent fluids from the SSS are metal-dominated and mostly precipitate very fine-grained hydrous Fe-oxides that remain suspended in the plume. Vent fluids from the ES are sulfur-dominated and precipitate a high proportion of coarser-grained Fe-sulfides that rapidly settle from the plume. The integrated flux of each vent field was estimated from measurements of the advective transport of each plume. Heat flux was 1700 ± 1100 MW from the ES and 580 ± 351 MW from the SSS. Particle flux varied from 546 ± 312 g/s to 204 ± 116 g/s at the ES depending on distance from the vent field, and was 92 ± 48 g/s from the SSS.  相似文献   

Fluorescence spectral analysis of resinite macerals from coals of the Hanna Formation, Wyoming, U.S.A.     

Stan C. Teerman  John C. Crelling  Gary B. Glass 《International Journal of Coal Geology》1987,7(4)

Flourescence spectral analysis indicates that resinite macerals from Tertiary Hanna Formation coals (Hanna Coal Field, southcentral Wyoming, U.S.A.) can be separated into five distinct groups. The first resinite group fluoresces a a medium green (in blue light); its average spectral maximum occurs at or below 440 mm with a red/green quotient of 0.22. The second resinite group fluoresces yellow-green with an average spectral maximum of 500 nm and a red/green quotient of 0.53. The third resinite group displays a yellow fluorescence having an average spectral maximum of 580 nm and a red/green quotient of 0.86. The fourth resinite group fluorescence orange-brown having an average spectral maximum of 610 nm and a red/green quotient of 1.20. These four groups mostly occur as primary globular resinites exhibiting scratches and fractures, indicating that they are brittle, solid substances. Primary cell-filling and secondary fracture-filling resinites also occur in these four groups. The fifth group only occurs as a secondary void-filling material and lacks evidence of br of brittle properties. It fluoresces a reddish-brown, has a spectral maximum at 690 nm, and a red/green quotient of 1.54. The fifth group has properties resembling exsudatinite. The five resinite groups can be separated on the basis of their nine spectral properties alone, without qualitative petrographic interpretation.The relative quantities of the five resinite groups vary among Hanna Formation coals. The origins of these five resinite groups are probably related to their botanical properties and pre- and post-depossitional conditions. Overall, Hanna Formation resinites have petrographic characteristics similar to other North American resinites; however, only four resinite groups have been distinguished in in certain coals from Utah and New Mexico (U.S.A.), and western Canada.  相似文献   

Similarity forms for ground-source surface-layer diffusion     

Gary A. Briggs 《Boundary-Layer Meteorology》1982,23(4):489-502

Past work on analyzing ground-source diffusion data in terms of surface-layer similarity theory is reviewed; these analyses assume that _z /L orh/L is a function of u ^* x/L (where h = Q/ dy). It is argued that an alternative scaling, h ^*/L versus x/L, is nearly as universal in that it is very weakly influenced by surface roughness, except for a modest influence in the free convective case (h ^* = Q/u ^* dy); the advantage of this scaling is that it eliminates the need to reassess as vertical diffusion progresses. The Prairie Grass data set is adjusted for the difference in source and sampling heights, and is plotted with this scaling. Simple analytic equations are suggested that fit the resultant data plots for stable and unstable conditions, and suggestions are made towards practical application of these results.On assignment from the National Oceanic and Atmospheric Administration, U.S. Department of Commerce.  相似文献   

Iron metal production in silicate melts through the direct reduction of Fe(II) by Ti(III), Cr(II), and Eu(II)     

Henry D. Schreiber  G.Bryan Balazs  Andrew P. Shaffer  P.Lynne Jamison 《Geochimica et cosmochimica acta》1982,46(10):1891-1901

The production of metallic iron in silicate melts by the chemical reactions, 2Ti³⁺_(melt) + Fe²⁺_(melt) → 2Ti⁴⁺_(melt) + Fe⁰_(crystal)2Cr²⁺_(melt) + Fe²⁺_(melt) → 2Cr³⁺_(melt) + Fe⁰_(crystal)2Eu²⁺_(melt)+ Fe²⁺_(melt) → 2Eu³⁺_(melt) + Fe⁰_(crystal) has been demonstrated under experimental conditions in a simplified basaltic liquid, Such reactions may occur in lunar basalts and other reduced systems, and, thus, may aid in the understanding of the reduced nature of lunar basalts. The reactions were studied in a glass-forming Na-Ca-Mg-Al-silicate composition at a melt temperature of 1250°C and an imposed oxygen fugacity at the C/CO buffer (1 atm total pressure). Microtitrations of individually-doped samples were used in the quantitative assessment of their redox ratios and for the calibration of visible and near-infrared spectral absorptions. These spectral absorptions were then applied to the evaluation of the mutual redox interactions in dual-doped samples.  相似文献   

An experimental investigation of high-temperature interactions between seawater and rhyolite,andesite, basalt and peridotite   总被引：1，自引：0，他引：1  

Andrew Hajash  Gary W. Chandler 《Contributions to Mineralogy and Petrology》1982,78(3):240-254

Natural seawater was allowed to react with rhyolite, andesite, basalt, and peridotite at 200°–500° C, and 1,000 bars at water/rock mass ratios of 5 and 50 in order to investigate the effects of rock type, water/rock ratio, and temperature on solution chemistry and alteration mineralogy. The results indicate that interactions of seawater with various igneous rocks are similar in the production of a hydrous Mg-silicate and anhydrite as major alteration products. Fluids involved in the interactions lose Mg to alteration phases while leaching Fe, Mn, and Si from the rocks. The pH of the solutions is primarily controlled by Mg-OH-silicate formation and therefore varies with Mg and Si concentration of the system. Other reactions which involve Mg (such as Mg-Ca exchange) or which produce free H⁺, cause major differences in fluid chemistry between different seawater/ rock systems. High water/rock ratio systems (50/1) are generally more acidic and more efficient in leaching than low ratio systems (5/1), due to relatively more seawater Mg available for Mgsilicate production. The experiments show that large-scale seawater/rock interaction could exert considerable control on the chemistry of seawater, as well as producing large bodies of altered rock with associated ore-deposits.Active plate margins of convergence or divergence are suitable environments for hydrothermal systems due to the concurrence of igneous activity, tectonism, and a nearby water reservoir (seawater or connate water). The experimental data indicate that seawater interactions with igneous host rocks could generate many of the features of ore-deposits such as the Kuroko deposits of Japan, the Raul Mine of Peru, the Bleida deposit of Morocco, and deposits associated with ophiolites. Serpentinization of peridotite and alteration of igneous complexes associated with plate margins can also be explained by seawater interaction with the cooling rock. Geothermal energy production could benefit from experimental investigations of hot water/rock systems by development of chemical, temperature, and pressure control systems to maximize the lifetime of hydrothermal flow.  相似文献   

Resistance of a pine forest to ozone uptake     

Gary K. Greenhut 《Boundary-Layer Meteorology》1983,27(4):387-391

The surface resistance of a pine forest to ozone uptake is calculated from aircraft data obtained in southern New Jersey. The resistances are 130 and 300 s m^-1 for the afternoon and early evening, respectively, in good agreement with estimates used by Galbally and Roy (1980) in their calculation of global surface destruction of ozone.  相似文献   

Identification of regions enriched or depleted in radioelements through nondistributional analysis of aerial radiometric data     

Fredric L. Prikle  Thomas R. Bement  Jo Ann Howell  Charles D. Koch  Newton K. Stablein  Richard J. Beckman  Gary L. Tietjen 《Journal of Geochemical Exploration》1983,18(3):175-187

Throughout the aerial radiometric reconnaissance survey portion of the U.S. Department of Energy's National Uranium Resource Evaluation (NURE) program, the identification of outliers (anomalies) was an important approach to locating regions with radio-element concentrations that are either higher or lower than expected. The method introduced herein to locate such regions involves three steps: selection of a high (or low) threshold for the variate of interest; use of the sample percentile to identify all points of interest; and movement of a window over the selected data to locate significant clusters of observations. These steps, applied to aerial radiometric ²¹⁴Bi (equivalent uranium) data collected over the Copper Mountain area in Wyoming, resulted in the identification of areas enriched in that variate.  相似文献