Mechanism for the rapid motion of the Qianjiangping landslide during reactivation by the first impoundment of the Three Gorges Dam reservoir, China   总被引：10，自引：6，他引：4  

Fawu Wang  Yeming Zhang  Zhitao Huo  Xuanming Peng  Shimei Wang  Shintaro Yamasaki 《Landslides》2008,5(4):379-386

The first impoundment of the Three Gorges Dam reservoir in China started from a water surface elevation of 95 m on June 1, 2003 and reached 135 m on June 15, 2003. Shortly after the water level reached 135 m, many slopes began to deform and some landslides occurred. The Qianjiangping landslide is the largest one; it occurred on the early morning of July 14, 2003 and caused great loss of lives and property. Field investigation revealed that, although failure occurred after the reservoir reached 135 m, the stability of the slope was already reduced by preexisting sheared bedding planes. To study the mechanism of the rapid motion of this reactivated landslide, two soil samples were taken from a yellow clay layer and a black silt layer in the sliding zone, respectively, and a series of ring shear tests were conducted on the samples. One series of ring shear tests simulates the creep deformation behavior, while the other series simulates different shear rates. Conclusions drawn from analysis of the ring shear tests indicate that the mechanism of the rapid motion of the reactivated landslide was caused by the rate effect of the black silt layer during the motion phase after the creep failure. The yellow clay layer did not play any important role in the rapid motion in the 2003 event.  相似文献   

大巴山西段高川地体构造变形特征及其意义   总被引：1，自引：0，他引：1  

胡健民董树文  孟庆任 《地质通报》2008,27(12)

勉略缝合带华北与华南大陆于印支期完成拼合的主要拼接带,在中国大陆的形成与演化中占据重要地位。但是,勉略带的东、西延伸,至今没有确定的结论,尤其陕西省勉县以东到湖北随州一带,还没有找到确凿的缝合带的证据。现今一些重要的文章多认为勉略带在勉县以东到达宁陕县两河口之后向南转折,沿着高川岩片的位置顺大巴山弧形构造带向东延伸到湖北随州一带。然而,本文的研究表明,高川岩片是一个独立于大巴山构造带的外来地质体,并称之为高川地体。高川地体是一个由近南北向右行走滑断层与轴向近南北向的走滑剪切褶皱构造组成的右行走滑构造系统,作者认为,它是大巴山冲断推覆构造向南推覆过程中,被从原勉略缝合带中挤过来的一片,它仅仅是被挟持在大巴山冲断—推覆构造带与大巴山前陆构造带之间的地壳浅层地质体,高川地体现在的位置不能代表勉略带向东的延伸。因此,大巴山弧形构造带也不是中国南北大陆最终碰撞拼贴的位置  相似文献   

甘肃庆城庄19井区上三叠统延长组长82亚油层组 低渗透储层的地质特征     

谢渊  谢正温  孙虎  鲁洪江  刘国良 《地质通报》2008,27(6):844-854

长82亚油层组是甘肃庆城地区庄19井区上三叠统延长组中储集砂岩相对富集的层位,但砂岩低渗透性的特点显著,成为影响该区石油储产量增长的主要地质因素.结合前人的相关工作,通过钻井岩心观察、测井曲线分析、储层岩石实验测试等工作,详细地分析了庄19井区长82亚油层组低渗透储层的地质特征,认为沉积微相和压实作用、胶结作用是控制低渗透性储集砂岩发育和分布的主要地质因素,寻找以水下分流河道微相为代表的有利储集相带砂岩体是油气勘探的重要方向.  相似文献   

云南楚雄红层盆地六苴砂岩铜矿区断裂的地质特征及其与成矿的关系   总被引：3，自引：2，他引：1  

吴鹏  韩润生  胡煜昭  李路乔  郭学兵  苏继泉 《地质通报》2008,27(5):618-625

云南六苴铜矿区分布有六苴、凹地苴等典型砂（页）岩型铜矿床。在矿区大比例尺填图的基础上,运用构造成矿动力学的理论和方法,筛选典型断裂进行断裂面力学性质的鉴定,划分构造期次,总结构造体系,对区内不同期次、不同方向断裂的地质特征及其与成矿的关系进行了系统的阐述。认为矿区断裂的发育经历了早期近东西向挤压、晚期北东-南西向挤压和后期近南北向挤压的过程。早期近东西向主应力作用时期是铜富集成矿的重要时期,形成的近南北向压性断裂为成矿提供了有利的场所和必要的条件;晚期北西向压扭性断裂、北东向扭张性断裂促使矿体进一步富集;后期近东西向压扭性断裂开始破坏矿体。将矿体向全浅色砂岩一侧错动。  相似文献   

煤炭采空区处理的新方法与实例分析     

彭树宏张晓帆  王金山 《中国煤炭地质》2008,20(1):47-49

位于乌鲁木齐市南湖路以西的煤炭采空区面积达67 100.5m^2,区内构造从南到北主要由八道湾向斜和七道湾背斜组成,地层产状变化不大。该矿区开采较深,且采空区塌陷区有明显的地下水活动迹象。在对深孔大体积采空区注浆时,比较各种常见注浆治理方法,均存在不同的制约因素,故决定采用灌浆爆破压密法对采空区进行压实加固。经现场爆破试验,该区重复爆破次数在3～5次左右。灌浆爆破压密处理后,对不同土层进行取样对比分析,得到其相应密度（增加）及空隙比（减少）的变化分别为：杂填土14.1%,-7.9%;素填土5.9%,-3.3%;塌落煤层7.8%,-7.7%。根据压缩数据及现场测量,处理后的土体沉降2～4m,部分空体地段的沉降量达10～20m,治理效果明显。  相似文献   

四川盆地南部中—上寒武统储层成岩作用   总被引：1，自引：0，他引：1  

杨伟  胡明毅  宋海敬  胡治华 《海相油气地质》2008,13(4)

四川盆地南部中—上寒武统(洗象池群)储层为一套碳酸盐岩局限台地沉积,其岩性为粗粉晶—细晶白云岩、砾屑白云岩、砂屑白云岩、鲕粒白云岩等。成岩作用主要有压实作用、胶结作用、白云石化作用、岩溶作用、破裂作用等,白云石化作用和岩溶作用是形成优质储层的关键。白云石化的机理为混合水白云石化。岩溶作用具有多期性,包括沉积期岩溶、风化期岩溶、埋藏期古岩溶和褶皱期古岩溶等,以风化期岩溶为主。压实作用和胶结作用破坏了大量的原生孔隙和次生孔隙。压实作用主要发生在浅埋藏期,它与埋藏期胶结一同作用使孔隙度由原来的15%左右骤降至2%～3%左右。随着后来的岩溶作用和破裂作用等,部分储层的孔隙度又扩大到4%～5%左右,以晶间孔和晶间溶孔为主要储集空间类型。  相似文献   

封闭体系有机质与有机碳氢氮恢复动力学研究   总被引：3，自引：0，他引：3  

彭平安  秦艳  张辉  刘大永  张善文  隋风贵  李钜源  李政 《海相油气地质》2008,13(2):27-36

在封闭体系的条件下,对典型的Ⅰ、Ⅱ、Ⅲ型干酪根在热演化过程中的损失进行生烃动力学研究,获得了Ⅰ、Ⅱ、Ⅲ型干酪根的总量、有机碳、氢以及氮质量损失动力学参数。用Kinetics软件计算了封闭体系干酪根有机碳丰度、氢碳原子比和氮碳原子比的恢复系数。认为在对高成熟—过成熟干酪根进行生烃评价时,Ⅰ、Ⅲ型干酪根残余有机碳丰度需要进行恢复,而Ⅱ型干酪根残余有机碳丰度不需要恢复。三种类型干酪根的氢碳原子比均需要进行恢复。  相似文献   

初至层析静校正在复杂山地三维地震勘探中的应用     

李德华  程怡  沈骥千  栾国庭  胡小鹏 《中国煤炭地质》2008,(6):44-45

随着地形高差增大、地貌单元多变、近地表模型复杂,目前被广泛应用的初至折射静校正的精度已无法满足精细勘探的要求。初至层析静校正技术,由给定的初始模型进行正演,用射线追踪方法得到初始模型的初至波,利用该初至波和实际拾取的初至波进行比较,计算地表模型的修正量,反复迭代求得准确的地表模型。山西省国阳新能股份有限公司二矿390水平九采扩区地表标高940～1100m,地貌单元复杂,在对该区资料处理时,利用初至层析折射静校正,经9次迭代计算后,真实地刻划出近地表模型。在二种静校正技术对比中,初至折射静校正不但近地表模型精度低于层析折射静校正,而且其叠加剖面精细程度也远低于层析静校正,如在初至折射静校正叠加剖面同相轴上呈现的凹凸形态,在层析静校正叠加剖面并无显示,且后者剖面的信噪比也比前者明显提高。  相似文献   

Using Sequential Self-Calibration Method to Identify Conductivity Distribution: Conditioning on Tracer Test data     

Bill X. Hu  Changming He 《Mathematical Geosciences》2008,40(8):845-859

An iterative inverse method, the sequential self-calibration method, is developed for mapping spatial distribution of a hydraulic conductivity field by conditioning on nonreactive tracer breakthrough curves. A streamline-based, semi-analytical simulator is adopted to simulate solute transport in a heterogeneous aquifer. The simulation is used as the forward modeling step. In this study, the hydraulic conductivity is assumed to be a deterministic or random variable. Within the framework of the streamline-based simulator, the efficient semi-analytical method is used to calculate sensitivity coefficients of the solute concentration with respect to the hydraulic conductivity variation. The calculated sensitivities account for spatial correlations between the solute concentration and parameters. The performance of the inverse method is assessed by two synthetic tracer tests conducted in an aquifer with a distinct spatial pattern of heterogeneity. The study results indicate that the developed iterative inverse method is able to identify and reproduce the large-scale heterogeneity pattern of the aquifer given appropriate observation wells in these synthetic cases.  相似文献   

Inversely-Mapped Analytical Solutions for Flow Patterns around and within Inclined Elliptic Inclusions in Fluid-Saturated Rocks   总被引：1，自引：0，他引：1  

Chongbin Zhao  Bruce E. Hobbs  Alison Ord  Shenglin Peng  Liangming Liu 《Mathematical Geosciences》2008,40(2):179-197

In this paper, an inverse mapping is used to transform the previously-derived analytical solutions from a local elliptical coordinate system into a conventional Cartesian coordinate system. This enables a complete set of exact analytical solutions to be derived rigorously for the pore-fluid velocity, stream function, and excess pore-fluid pressure around and within buried inclined elliptic inclusions in pore-fluid-saturated porous rocks. To maximize the application range of the derived analytical solutions, the focal distance of an ellipse is used to represent the size of the ellipse, while the length ratio of the long axis to the short one is used to represent the geometrical shape of the ellipse. Since the present analytical solutions are expressed in a conventional Cartesian coordinate system, it is convenient to investigate, both qualitatively and quantitatively, the distribution patterns of the pore-fluid flow and excess pressure around and within many different families of buried inclined elliptic inclusions. The major advantage in using the present analytical solution is that they can be conveniently computed in a global Cartesian coordinate system, which is widely used in many scientific and engineering computations. As an application example, the present analytical solutions have been used to investigate how the dip angle of an inclined elliptic inclusion affects the distribution patterns of the pore-fluid flow and excess pore-fluid pressure when the permeability ratio of the elliptic inclusion is of finite but nonzero values.  相似文献