Recurring emergence of the mud islands on shelf of the Arabian Sea along the Makran coast of Pakistan – Historical perspective using remote sensing techniques     

Akhtar M. Kassi  Huseyin Bayraktar  Shuhab D. Khan  Aimal K. Kasi 《Journal of the Geological Society of India》2017,90(2):201-208

Recurring emergences of mud islands on shelf of the Arabian Sea, along the Makran coast of Pakistan are now known to be submarine mud volcanoes. They are expressions of enhanced extrusions of fluidized mud and gases coupled with compressional tectonics in convergent margin settings. Since 1945 the Malan island has emerged four times, and some other mud islands have also been emerging repeatedly, at their own positions.The first known emergence, during November 1945, was concurrent with an earthquake of magnitude 8.0 (M8.0), the 2^nd and 3^rd emergences, in March 1999 and November 2010 respectively, were not related apparently with earthquakes. The 4^th emergence concurred with the Awaran earthquake (M7.7) of 24th September 2013. Landsat images of March 1999 and November 2010 emergences indicate appearance of round-shaped island of 4.4 and 5.2 hectare area, followed by erosion and disappearance. The island was composed of mud breccias and circular vents spewing mud slurry and methane gas.The emergence of Malan island, in March 1999 and November 2010 was compared with earthquake data before and after the emergences. The earthquakes data, two years before March 1999 and November 2010 emergences and two years afterwards, shows correlation with both small and large earthquakes, prior to the emergence, in the radius of over 400 km. It is proposed that mud islands develop in response to the episodes of enhanced mud extrusion, which inturn are related with the enhanced compressional and/or seismic events. These events are followed by periods of relative quiescence characterized by normal activity of mud extrusion and marine erosion.  相似文献   

Allowable Bearing Capacity of Shallow Foundations Based on Shear Wave Velocity     

Semih S. Tezcan  Ali Keceli  Zuhal Ozdemir 《Geotechnical and Geological Engineering》2006,24(1):203-218

Firstly, the historical background is presented for the determination of ultimate bearing capacity of shallow foundations. The principles of plastic equilibrium used in the classical formulation of the ultimate bearing capacity are reviewed, followed by a discussion about the sources of approximations inherent in the classical theory. Secondly, based on a variety of case histories of site investigations, including extensive bore hole data, laboratory testing and geophysical prospecting, an empirical formulation is proposed for the determination of allowable bearing capacity of shallow foundations. The proposed expression corroborates consistently with the results of the classical theory and is proven to be reliable and safe, also from the view point of maximum allowable settlements. It consists of only two soil parameters, namely, the in-situ measured shear wave velocity, and the unit weight. The unit weight may be also determined with sufficient accuracy, by means of another empirical expression, using the P-wave velocity. It is indicated that once the shear and P-wave velocities are measured in-situ by an appropriate geophysical survey, the allowable bearing capacity is determined reliably through a single step operation. Such an approach, is considerably cost and time-saving, in practice.  相似文献   

A Comparative Study for 3D Surface Modeling of Coal Deposit by Spatial Interpolation Approaches     

Ahmet Dag  Ali Can Ozdemir 《Resource Geology》2013,63(4):394-403

The planning stages of mining require comprehensive and detailed analyses. The proper determination of the orebody boundary is one of the most important points to provide optimum model structure and projections. The limits can be determined by different methods based on the site geology. Although some three dimensional (3D) models were proposed for providing detailed information concerning a mine deposit, developing a solid model via a 3D approach is novelty. In other words, surface modeling should be performed for creating a solid model and determining limits of the deposit. In this way, sensible generation of the surface model can be achieved. This study investigated the estimation capability of the polynomial approach, which is a novel spatial interpolation method, for modeling a coal deposit surface. The performance of the proposed model was compared with some conventional methods in the literature. The results showed that the polynomial interpolation method is an effective method to employ for surface modeling of a mine deposit.  相似文献   

Evaluation of digital image processing (DIP) in analysis of magnetic separation fractions from Na-feldspar ore     

Ilgin Kursun  Mert Terzi  Orhan Ozdemir 《Arabian Journal of Geosciences》2018,11(16):462

Combination of flotation and magnetic separation methods is widely used for enrichment of feldspar ores by purifying from dark-colored gangue minerals such as iron and titanium. In this study, the removal of dark-colored minerals from feldspar ore (Aydin Cine region of Turkey) was studied using a dry magnetic separator. The effect of several parameters such as feed particle size, blade angle, and roll speed on the removal efficiency was investigated in detail. In addition, the gangue contents of the magnetic and non-magnetic products were determined by a digital image processing (DIP) method in terms of using color differences between the feldspar sample and gangue minerals. The results obtained from this study clearly indicated that the dry magnetic separation method can be successfully applied in enrichment of feldspar. Meanwhile, the particle size of the sample showed no significant influence on the separation recovery. According to the results obtained from the digital image processing process, the sample with 0.04% cross sectional area of dark-colored minerals can be obtained at roll speed of 100 rpm and 130° of blade angle using the original particle size of 500×106 μm. Additionally, most importantly, these results showed that digital image processing method can be used to determine gangue content (dark-colored minerals) of the magnetic separation products compared to conventional methods as a simple, a reliable, and a repeatable method.  相似文献   

Water absorption process effect on strength of Ayazini tuff,such as the uniaxial compressive strength (UCS), flexural strength and freeze and thaw effect     

Mustafa Yavuz Çelik  Huseyin Akbulut  Ayşe Ergül 《Environmental Earth Sciences》2014,71(9):4247-4259

Tuffs have been used as a construction material possibly since ancient times. In Afyonkarahisar, Turkey, there are numerous buildings constructed by tuff. Tuff has been a local construction material, during the Roman, Seljuk and Ottoman periods. Even though tuffs have relatively low durability and low strength values compared to marble, etc., they have survived with no major deterioration failures on many historical buildings. It has also been preferred because of its high porous texture, lightweight and easy shaping and process properties in the building sector. Naturally, it would be easily affected by water and humidity because of its porous structure. However, having this kind of structure leads to poor durability properties due to keeping water in it. The main objective of this study was to evaluate the physical and mechanical properties of the tuff quarried from the region and possible water effect, which may lead to degradation of its strength and durability of the material, thereby shortening the life span of the building structure used. Samples, which were tested after exposing to water and the freeze and thaw effects, were measured at a certain time. In this study, uniaxial compressive strength and flexural strength tests were conducted on test samples. The test results indicate that water may deteriorate the tuff’s strength properties and durability of the materials in due time.  相似文献   

Early Archean spherule layers from the Barberton Greenstone Belt,South Africa: Mineralogy and geochemistry of the spherule beds in the CT3 drill core          下载免费PDF全文

Seda Ozdemir  Toni Schulz  Christian Koeberl  Wolf Uwe Reimold  Tanja Mohr‐Westheide  Desiree Hoehnel  Ralf Thomas Schmitt 《Meteoritics & planetary science》2017,52(12):2586-2631

Little is known about the Hadean and the Archean impact record on Earth. In the CT3 drill core from the Fig Tree Group of the northern Barberton Greenstone Belt, 17 spherule layer intersections occur, which, provide an outstanding new opportunity to gain insights into meteorite bombardment of the early Earth. CT3 spherules, as primary features, mostly exhibit textural patterns similar to those of the other Barberton spherule layers, but locally mineralogical and chemical compositional differences are observed, likely as a result of various degrees of alteration. The observed mineralogy of the spherule layers is of secondary origin and comprises K‐feldspar, phyllosilicates, carbonates, sulfides, and oxides, with the exception of secondary Ni‐Cr spinel that is of primary origin. Our petrographic investigations suggest alteration by K‐metasomatism, sericitization, silicification, and carbonatization. Siderophile element contents of bulk samples show significant enrichments in Ni (up to 2 wt%) and Ir (up to ~3 ppm), similar to previously studied Archean spherule layers. These values are indicative of the presence of a meteoritic component. On the other hand, lithophile and chalcophile element abundances indicate hydrothermal overprint on the CT3 samples; this may also have influenced the redistribution of the meteoritic component(s). Last, we group the CT3 spherule layers, which occur in three intervals (A, B, and C), according to their petrographic and geochemical features, which indicate evidence for at least three distinct impact events before tectonic overprint that affected the original deposits.  相似文献