Palaeoceanographic changes in the North Atlantic during the Mid‐Pleistocene Transition (MIS 31–19) as inferred from planktonic foraminiferal and calcium carbonate records     

Iván Hernández‐Almeida  Francisco Javier Sierro  José‐Abel Flores  Isabel Cacho  Gabriel Michael Filippelli 《Boreas: An International Journal of Quaternary Research》2013,42(1):140-159

Marine sediments from the Integrated Ocean Drilling Project (IODP) Site U1314 (56.36°N, 27.88°W), in the subpolar North Atlantic, were studied for their planktonic foraminifera, calcium carbonate content, and Neogloboqudrina pachyderma sinistral (sin.) δ¹³C records in order to reconstruct surface and intermediate conditions in this region during the Mid‐Pleistocene Transition (MPT). Variations in the palaeoceanography and regional dynamics of the Arctic Front were estimated by comparing CaCO₃ content, planktonic foraminiferal species abundances, carbon isotopes and ice‐rafted debris (IRD) data from Site U1314 with published data from other North Atlantic sites. Site U1314 exhibited high abundances of the polar planktonic foraminifera N. pachyderma sin. and low CaCO₃ content until Marine Isotope Stage (MIS) 26, indicating a relatively southeastward position of the Arctic Front (AF) and penetration of colder and low‐salinity surface arctic water‐masses. Changing conditions after MIS 25, with oscillations in the position of the AF, caused an increase in the northward export of the warmer North Atlantic Current (NAC), indicated by greater abundances of non‐polar planktonic foraminifera and higher CaCO₃. The N. pachyderma sin. δ¹³C data indicate good ventilation of the upper part of the intermediate water layer in the eastern North Atlantic during both glacial and interglacial stages, except during Terminations 24/23, 22/21 and 20/1. In addition, for N. pachyderma (sin.) we distinguished two morphotypes: non‐encrusted and heavily encrusted test. Results indicate that increases in the encrusted morphotype and lower planktonic foraminiferal diversity are related to the intensification of glacial conditions (lower sea‐surface temperatures, sea‐ice formation) during MIS 22 and 20.  相似文献   

A four-parameter,two degree-of-freedom block-spring model: Effect of the driver velocity     

Jose L. Brun  Javier B. Gomez 《Pure and Applied Geophysics》1994,143(4):633-653

We analyze the effect of tectonic plate velocities in the earthquake pattern using a simple mass-spring model of the Burridge and Knopoff type with two blocks and a velocity-weakening friction law. Previous versions of the two-block model assume a steady driver during slip events (limit of zero driver velocity), which, in some cases makes necessary the introduction of artificial parameters to start the numerical integration of the equations of motion at impending slip of any block. Still maintaining the condition of zero driver velocity during slip, we shall introduce a procedure to start the numerical integration without introducing artificial parameters and this will be done by using a linearized version of the equations of motion valid for small velocities and considering nonzero driver velocity. We also introduce a four parameter model in which the driver velocity enters the equations during the whole simulation, and analyze the effect of the new parameter, the driver velocity, in the displacement and time patterns of blocks motion, directly related to earthquake statistics such as coseismic slips and average repeat times.  相似文献   

A Parametric Approach for Dealing with Compositional Rounded Zeros   总被引：2，自引：0，他引：2  

Javier Palarea-Albaladejo  Josep A. Martín-Fernández  Juan Gómez-García 《Mathematical Geology》2007,39(7):625-645

In this work, a parametric approach for replacing data below the detection limit, also known as rounded zeros, in compositional data sets is proposed. Compositional rounded zeros correspond to small proportions of some whole that cannot be reliably detected by the analytical instruments under given operating conditions. This kind of zeros appear frequently in the data collection process in geosciences. They must be treated in an adequate way before some multivariate analysis can be applied. Our procedure results from a modification of the Expectation-Maximization (EM) algorithm and is based on the additive log-ratio transformation. Its coherence with the nature of compositional data and with basic operations in the simplex sample space is checked. Using real data sets, we find that this approach improves other parametric and non-parametric techniques for compositional rounded zeros.  相似文献   

NO2 total column evolution during the 1989 spring at Antarctica Peninsula     

Manuel Gil  Javier Cacho 《Journal of Atmospheric Chemistry》1992,15(2):187-200

Ground-based visible differential absorption spectrometry during twilight has been used for NO₂ total column observations at the Antarctica Peninsula, Marambio Base (64S, 56W), during the austral spring of 1989 (9 September to 25 November).Results show moderate NO₂ vertical column levels of 1.5 to 2.5×10¹⁵ molec cm^-2 in the morning and 2 to 3×10¹⁵ molec cm^-2 in the evening until middle October, highly modulated by planetary wave activity. From that date until the end of the period, a steady increase occurs which is associated with the rising of lower stratosphere temperature as the vortex weakens, reaching values of 5×10¹⁵ molec cm^-2 in late November, with small a.m.-p.m. differences. NO₂ is found to be positively correlated to both total ozone and 50 hPa temperature during the entire spring. However, when analyzing the departures from linear trends, a highly negative correlation has been observed from day 301 onwards.  相似文献   

Comparing performance indicators to characterize the water supply to the demands of the Guadiana River basin (Spain)     

Carla Palop-Donat  Javier Paredes-Arquiola  Abel Solera  Joaquín Andreu 《水文科学杂志》2020,65(7):1060-1074

ABSTRACT

Water indicators and indices are useful tools to assess river basin performance, that is, to measure whether the basin operates satisfactorily under a wide range of possible future demands and hydrological conditions. Spanish regulations assess the performance of water demands by using reliability indicators (RIs), established by law in 2008. This article raises the possibility of updating RIs by comparing them with sustainability indicators (SIs). SIs are widely used for the assessment of river basin performance and several policy scenarios. We applied a water allocation model to the Guadiana River basin in Spain to compare indicators under three scenarios. The study was framed within the science of socio-hydrology, combining the physical environment of a water system with its influence on social aspects. SIs gave better results than RIs when comparing future scenarios. We also propose the introduction of a vulnerability indicator into Spanish regulations.  相似文献   

Heavy metals in molluscs from the Basque Coast (Northern Spain): results from an 11-year monitoring programme   总被引：1，自引：0，他引：1  

Franco J  Borja A  Solaun O  Pérez V 《Marine pollution bulletin》2002,44(9):973-976

  相似文献   

Sequence stratigraphy of Holocene incised-valley fills and coastal evolution in the Gulf of Cádiz (southern Spain)     

Dabrio  Cristino J.  Zazo  Cari  Lario  Javier  Goy  José Luis  Sierro  Francisco J.  Borja  Francisco  González  José Ángel  Flores  José Abel 《Geologie en Mijnbouw》1998,77(3-4):263-281

This first sedimentary interpretation of two incised-valley fills in the Gulf of Cádiz (southern Spain), which accumulated during the last fourth-order eustatic cycle in response to fluvial incision, changes of sea level, and correlative deposition, relates the filling of the estuarine basins and their barriers with four regional progradation phases, H₁ to H₄. The cases studied are the wave-dominated Guadalete, and the mixed, tide and wave-dominated Odiel-Tinto estuaries. The sequence boundary is a type-1 surface produced during the lowstand of the Last Glacial period ca. 18 000 ¹⁴C yr BP. No fluvial lowstand deposits were found in the area. Due to rapid transgression the valley fills consist of transgressive and highstand sediments. The maximum landward advance of the estuarine barriers occurred ca. 6500–6000 ¹⁴C yr BP during the maximum of the Flandrian transgression, but there is no evidence of sea level rising appreciably above the present. A large part of the estuaries was filled during H₁ (ca. 6500–4400 ¹⁴C yr BP) but ravinement by shifting tidal inlets destroyed most of the coeval barriers. During the H₂ phase (ca. 4200–2550 ¹⁴C yr BP) sedimentation was favoured by arid conditions and concentrated in the axial estuarine zones and the barriers. Between H₂ and H₃ prevailing winds changed from W to WSW, increasing spit growth to the east and south-east. Progradation of bay-head deltas and flood-plains during H₃ (ca. 2300–800 ¹⁴C yr BP) and H₄ (500 yr ago to the present) further reduced the accommodation space in the largely-filled valleys, and sediment by-passed the estuaries and accumulated in the estuarine barriers as fast-growing spits. Arid conditions and increasing human activity have caused rapid coastal modifications.  相似文献   

The theory of asynchronous relative motion I: time transformations and nonlinear corrections     

Javier Roa  Jesús Peláez 《Celestial Mechanics and Dynamical Astronomy》2017,127(3):301-330

Using alternative independent variables in lieu of time has important advantages when propagating the partial derivatives of the trajectory. This paper focuses on spacecraft relative motion, but the concepts presented here can be extended to any problem involving the variational equations of orbital motion. A usual approach for modeling the relative dynamics is to evaluate how the reference orbit changes when modifying the initial conditions slightly. But when the time is a mere dependent variable, changes in the initial conditions will result in changes in time as well: a time delay between the reference and the neighbor solution will appear. The theory of asynchronous relative motion shows how the time delay can be corrected to recover the physical sense of the solution and, more importantly, how this correction can be used to improve significantly the accuracy of the linear solutions to relative motion found in the literature. As an example, an improved version of the Clohessy-Wiltshire (CW) solution is presented explicitly. The correcting terms are extremely compact, and the solution proves more accurate than the second and even third order CW equations for long propagations. The application to the elliptic case is also discussed. The theory is not restricted to Keplerian orbits, as it holds under any perturbation. To prove this statement, two examples of realistic trajectories are presented: a pair of spacecraft orbiting the Earth and perturbed by a realistic force model; and two probes describing a quasi-periodic orbit in the Jupiter-Europa system subject to third-body perturbations. The numerical examples show that the new theory yields reductions in the propagation error of several orders of magnitude, both in position and velocity, when compared to the linear approach.  相似文献   

Coastal and estuarine habitat mapping, using LIDAR height and intensity and multi-spectral imagery   总被引：3，自引：1，他引：2  

Guillem Chust  Ibon Galparsoro  ngel Borja  Javier Franco  Adolfo Uriarte 《Estuarine, Coastal and Shelf Science》2008,78(4):633-643

The airborne laser scanning LIDAR (LIght Detection And Ranging) provides high-resolution Digital Terrain Models (DTM) that have been applied recently to the characterization, quantification and monitoring of coastal environments. This study assesses the contribution of LIDAR altimetry and intensity data, topographically-derived features (slope and aspect), and multi-spectral imagery (three visible and a near-infrared band), to map coastal habitats in the Bidasoa estuary and its adjacent coastal area (Basque Country, northern Spain). The performance of high-resolution data sources was individually and jointly tested, with the maximum likelihood algorithm classifier in a rocky shore and a wetland zone; thus, including some of the most extended Cantabrian Sea littoral habitats, within the Bay of Biscay. The results show that reliability of coastal habitat classification was more enhanced with LIDAR-based DTM, compared with the other data sources: slope, aspect, intensity or near-infrared band. The addition of the DTM, to the three visible bands, produced gains of between 10% and 27% in the agreement measures, between the mapped and validation data (i.e. mean producer's and user's accuracy) for the two test sites. Raw LIDAR intensity images are only of limited value here, since they appeared heterogeneous and speckled. However, the enhanced Lee smoothing filter, applied to the LIDAR intensity, improved the overall accuracy measurements of the habitat classification, especially in the wetland zone; here, there were gains up to 7.9% in mean producer's and 11.6% in mean user's accuracy. This suggests that LIDAR can be useful for habitat mapping, when few data sources are available. The synergy between the LIDAR data, with multi-spectral bands, produced high accurate classifications (mean producer's accuracy: 92% for the 16 rocky habitats and 88% for the 11 wetland habitats). Fusion of the data enabled discrimination of intertidal communities, such as Corallina elongata, barnacles (Chthamalus spp.), and stands of Spartina alterniflora and Phragmites australis, which presented misclassification when conventional visible bands were used alone. All of these results were corroborated by the kappa coefficient of agreement. The high classification accuracy found here, selecting data sources, highlights the value of integrating LIDAR data with multi-spectral imagery for habitat mapping in the intertidal complex fringe.  相似文献   

Testing the stereoscopic precision of a large-format digital camera     

Benjamín  Arias  Javier  Gómez-Lahoz 《The Photogrammetric Record》2009,24(126):157-170

The use of large-format digital cameras in aerial photogrammetry is leading to great improvements in photogrammetric production. Since they were first introduced about 10 years ago, the technological community has been testing and investigating the conditions under which this major change can be consolidated. But a certain (and understandable) bias may be noticed in the efforts that developers, researchers and clients are undertaking. Almost all of the efforts aim at checking the quality of automated measurements and very little attention has been directed to stereoscopic measurements by human operators, which, nevertheless, still represent an important task that needs to be carried out in the production chain. This paper presents the results from a number of tests (13 operators from a variety of enterprises) performed to check the stereoscopic precision of Vexcel UltraCamD camera images compared with Leica RC30 film images. The main conclusion to be drawn from the empirical data is that stereoscopic precision does not depend on the type of camera.  相似文献