Characteristics of the atmospheric heat source and moisture sink over the Qinghai-Tibetan Plateau during the second TIPEX of summer 1998 and their impact on surrounding monsoon   总被引：2，自引：0，他引：2  

L. X. Chen  F. Schmidt  W. Li 《Meteorology and Atmospheric Physics》2003,83(1-2):1-18

Summary ?Using the data of 6 automatic heat balance observation (AWS) stations and a data set of 52 surface observation stations over the Qinghai-Tibetan Plateau (“the Plateau”) and surroundings, the horizontal distribution is studied of “apparent atmospheric heat sources” 〈Q ₁〉 and of “apparent atmospheric moisture sinks” 〈Q ₂〉. The AWS stations were established during the period May to August 1998 of the Tibetan Plateau Meteorological Experiment (second TIPEX) by a cooperation of China and Japan. For this period the Plateau mean of 〈Q ₁〉 is positive. Its value of 74 W/m² is a little greater than a climate value and than values from MONEX and the first TIPEX in 1979, respectively. Also the corresponding 〈Q ₂〉 is positive. Hence during that time the Plateau is a heat source and a moisture sink. A day-to-day change of 〈Q ₁〉 and 〈Q ₂〉 is more pronounced over the middle and east part of the Plateau than over the west part. Diagnostics accompanied by numerical simulations are used to study the daily relationship between 〈Q ₁〉 over the Plateau and the weather over China and Asia for this summer. The results suggest that 〈Q ₁〉 may affect precipitation over northern China and position of the west Pacific subtropical high. Abnormal southward retreat of this Pacific high seems to have caused the second flood over the middle and lower Yangtse river basin in July. Received May 20, 2001; revised February 2, 2002  相似文献   

New palaeomagnetic data from Central Iran and a Triassic palaeoreconstruction     

H. C. Soffel  S. Schmidt  M. Davoudzadeh  C. Rolf 《International Journal of Earth Sciences》1996,85(2):293-302

New pole positions for Triassic and Cretaceous times have been obtained from volcanic and sedimentary sequences in Central Iran. These new results confirm the general trend of the Apparent Polar Wander Path (APWP) of the Central-East-Iran microplate (CEIM) from the Triassic through the Tertiary as published by Soffel and Förster (1983, 1984). Two new palaeopoles for the Triassic of the CEIM have been obtained; limestones and tuffs from the Nakhlak region yield a mean direction of 094.0°/25.0°, N=12, k=4.1,α ₉₅=24.7°, after bedding correction, corresponding to a palaeopole position of 310.8°E; 3.9°S, and volcanic rocks from the Sirjan regions yield a mean direction of 114.5°/35.1°, N=44, k=45.9,α ₉₅=3.2° after bedding correction and a palaeopole position of 295.8°E; 10.3°N. Combining these with the two previously published results yields a new palaeopole position of 317.5°E; 12.7°N, for the Triassic of the CEIM, thus confirming that large counterclockwise rotations of the CEIM have occurred since the Triassic time. New results have also been obtained from Cretaceous limestones from the Saghand region of the CEIM. The mean direction of 340.7°/26.3°, N=33, k=44.3,α ₉₅=3.8°, and the corresponding palaeopole position of 283.1°E; 64.4°N, is in agreement with previously determined Cretaceous palaeopole positions of the CEIM. Furthermore, results have also been obtained from Triassic dolomite, limestone, sandstone and siltstone from the Natanz region, which is located to the west of the CEIM. A total of 161 specimens from 44 cores taken at five sites gave a mean direction of the five sites at 033.3°/25.1°, N=5, k=69.0,α ₉₅=9.3° and a palaeopole position of 167.2°E; 53.7°N. They pass the positive fold test of McElhinny (1964) on the level of 99% confidence. This pole position is in fairly good agreement with the mean Triassic pole position of the Turan Plate (149°E; 49°N). It indicates that the area of Natanz has not undergone the large counterclockwise rotation relative to the Turan plate since the Triassic, which has been shown for the CEIM. A Triassic palaeogeographic reconstruction of Iran, Arabia (Gondwana) and the Turan Plate (Eurasia) is also presented.  相似文献   

Geostatistical regionalization of glacial aquitard thickness in northwestern Germany, based on fuzzy kriging   总被引：1，自引：0，他引：1  

J. A. Piotrowski  F. Bartels  A. Salski  G. Schmidt 《Mathematical Geology》1996,28(4):437-452

In many instances hydrogeological parameters obtained by conventional methods for selected localities within an aquifer or an aquitard are not sufficient for adequate regionalization at the scale of the entire layer. Here, we demonstrate an application of the fuzzy kriging method in regionalization of hydrogeological data, in which the set of conventional, crisp values is supplemented by imprecise information subjectively estimated by an expert. It is believed that such an approach eventually may reflect the real-world conditions more closely than a traditional crisp-value approach, because the former does not impose exactness artificially on phenomena which are diffuse by their nature. Spatial interpolation was done for the thickness of one of the major aquitards (till and glaciolacustrine clay) in northwestern Germany. The dataset consists of 329 crisp values from boreholes supplemented by 172 imprecise values defined as fuzzy numbers. It is demonstrated that the reliability of regionalization was higher, compared to regionalization performed with the crisp dataset only. Fuzzy kriging was performed with FUZZEKS (Fuzzy Evaluation and Kriging System) developed at the Ecosystem Research Center at the University of Kiel.  相似文献   

Gewässerbeurteilung - Sind wir am Ende mit den Qualitätskriterien? Aus analytischer Sicht     

S. Schmidt 《洁净——土壤、空气、水》1997,25(4):213-218

  相似文献   

Gravity reduction with three-dimensional atmospheric pressure data for precise ground gravity measurements     

Juergen Neumeyer  Jan Hagedoorn  Jens Leitloff  Torsten Schmidt 《Journal of Geodynamics》2004,38(3-5):437

The redistribution of air masses induces gravity variations (atmospheric pressure effect) up to about 20 μgal. These variations are disturbing signals in gravity records and they must be removed very carefully for detecting weak gravity signals. In the past, different methods have been developed for modelling of the atmospheric pressure effect. These methods use local or two-dimensional (2D) surface atmospheric pressure data and a standard height-dependent air density distribution. The atmospheric pressure effect is consisting of the elastic deformation and attraction term. The deformation term can be well modelled with 2D surface atmospheric pressure data, for instance with the Green's function method. For modelling of the attraction term, three-dimensional (3D) data are required. Results with 2D data are insufficient.From European Centre for Medium-Range Weather Forecasts (ECMWF) 3D atmospheric pressure data are now available. The ECMWF data used here are characterised by a spacing of Δ and Δλ = 0.5°, 60 pressure levels up to a height of 60 km and an interval of 6 h. These data are used for modelling of the atmospheric attraction term. Two attraction models have been developed based on the point mass attraction of air segments and the gravity potential of the air masses. The modelling shows a surface pressure-independent part of gravity variations induced by mass redistribution of the atmosphere in the order of some μgal. This part can only be determined by using 3D atmospheric pressure data. It has been calculated for the Vienna Superconducting Gravimeter site.From this follows that the gravity reduction can be improved by applying the 3D atmospheric attraction model for analysing long-periodic tidal waves including the polar tide. The same improvement is expected for reduction of long-term absolute gravity measurements or comparison of gravity measurements at different seasonal times. By using 3D atmospheric pressure data, the gravity correction can be improved up to some μgal.  相似文献   

Sampling Fauna in Stream Sediments as well as Groundwater Using One Net Sampler     

Susanne I. Schmidt  Hans J. Hahn  Gerald D. Watson  Robert J. Woodbury  Thomas J. Hatton 《洁净——土壤、空气、水》2004,32(2):131-137

Groundwater bores act as traps. Net samplers are regularly used for sampling this type of trap for fauna. To enable direct comparisons of faunal communities in groundwater bores and stream sediments, stream sediment tubes were built similar to groundwater bores and were sampled with net samplers for fauna. These stream sediment tubes consisted of a tube anchored in the stream sediment, also called interstitial space. To test the efficacy of this trap method in stream sediments, it was compared to another type of trap, Hahn's trap. Faunal communities sampled by a net in the stream sediment tubes did not differ hugely from fauna in Hahn's trap samples. Physical and chemical factors of sampled water in both the stream sediment tubes, the surrounding interstitial sediments and the second type of traps, Hahn's traps, showed that water in both the tubes and Hahn's traps was closely related to interstitial water. The net sampler is inexpensive and easy to handle. It is suggested that sampling stream tubes with nets may be an appropriate method for long‐term monitoring studies.  相似文献   

Fractional crystallization of Si-undersaturated alkaline magmas leading to unmixing of carbonatites on Brava Island (Cape Verde) and a general model of carbonatite genesis in alkaline magma suites     

Daniel Weidendorfer  Max W. Schmidt  Hannes B. Mattsson 《Contributions to Mineralogy and Petrology》2016,171(5):43

  相似文献   

Hydration of periclase at 350 ∘C to 620 ∘C and 200 MPa: experimental calibration of reaction rate     

H. Kuleci  C. Schmidt  E. Rybacki  E. Petrishcheva  R. Abart 《Mineralogy and Petrology》2016,110(1):1-10

The hydration of periclase to brucite was investigated experimentally. Single crystals of periclase machined to millimeter sized cubes with (100) surfaces were reacted with distilled water at temperatures of 350 to 620 ^°C and a pressure of 200 MPa for run durations of 5 to 40 minutes. Hydration produced a layer of brucite covering the surface of periclase. While the shrinking periclase largely retained its cube shape a surface roughness developed on the μm scale and eventually outward pointing spikes bounded by (111) faces emerged on the retreating faces of the periclase due to kinetic selection of less reactive (111) and (110) surfaces. The periclase to brucite conversion followed a linear rate law, where the reaction rate increased from 350 to 530 ^°C and then decreased towards higher temperature and finally vanished at about 630 ^°C, where periclase, brucite, and water are in equilibrium at 200 MPa. The overall kinetics of the hydration reaction is conveniently described in terms of a phenomenological interface mobility. Measuring the velocity of the hydration front relative to the lattice of the reactant periclase, the temperature dependence of its mobility is described by an Arrhenius relation with pre-exponential factor 1.7.10^?12 m ⁴/s.J and activation energy of E_A=55 kJ/mol.  相似文献   

MODSNOW-Tool: an operational tool for daily snow cover monitoring using MODIS data     

A. Gafurov  S. Lüdtke  K. Unger-Shayesteh  S. Vorogushyn  T. Schöne  S. Schmidt  O. Kalashnikova  B. Merz 《Environmental Earth Sciences》2016,75(14):1078

  相似文献   

Supervised classification of electric power transmission line nominal voltage from high-resolution aerial imagery     

Erik H. Schmidt  Budhendra L. Bhaduri  Nicholas Nagle  Bruce A. Ralston 《地理信息系统科学与遥感》2018,55(6):860-879

For many researchers, government agencies, and emergency responders, access to the geospatial data of US electric power infrastructure is invaluable for analysis, planning, and disaster recovery. Historically, however, access to high quality geospatial energy data has been limited to few agencies because of commercial licenses restrictions, and those resources which are widely accessible have been of poor quality, particularly with respect to reliability. Recent efforts to develop a highly reliable and publicly accessible alternative to the existing datasets were met with numerous challenges – not the least of which was filling the gaps in power transmission line voltage ratings. To address the line voltage rating problem, we developed and tested a basic methodology that fuses knowledge and techniques from power systems, geography, and machine learning domains. Specifically, we identified predictors of nominal voltage that could be extracted from aerial imagery and developed a tree-based classifier to classify nominal line voltage ratings. Overall, we found that line support height, support span, and conductor spacing are the best predictors of voltage ratings, and that the classifier built with these predictors had a reliable predictive accuracy (that is, within one voltage class for four out of the five classes sampled). We applied our approach to a study area in Minnesota.  相似文献