Modeling discrete gas bubble formation and mobilization during subsurface heating of contaminated zones     

Magdalena M. Krol 《Advances in water resources》2011,34(4):537-549

During thermal remediation the increase in subsurface temperature can lead to bubble formation and mobilization. In order to investigate the effect of gas formation on resulting aqueous concentrations, a 2D finite difference flow and mass transport model was developed which incorporates a macroscopic invasion percolation (MIP) model to simulate bubble expansion and movement. The model was used to simulate three soil scenarios with different permeabilities and entry pressures at various operating temperatures and groundwater velocities. It was observed that discrete bubble formation occurred in all three soils, upward mobility being limited by lower temperatures and higher entry pressures. Bubble mobilization resulted in a different aqueous mass distribution than if no discrete gas formation was modeled, especially at higher temperatures. This was a result of bubbles moving upwards to cooler areas, then collapsing, and contaminating previously clean zones. The cooling effect also led to possible non-aqueous phase liquid (NAPL) formation which was not predicted using a model without discrete bubble formation.  相似文献   

Application of organic petrology and geochemistry to coal waste studies   总被引：1，自引：0，他引：1  

Magdalena Misz-Kennan  Monika J. Fabiańska 《International Journal of Coal Geology》2011,88(1):1-23

Coal wastes produced during mining activities are commonly deposited in nearby dumps. These wastes mostly composed of minerals and variable amounts (usually 20-30%) of organic matter start to weather immediately after deposition. Oxidation of the organic matter can lead to self heating and self combustion as a result of organic and mineral matter transformations. The degree of alteration depends on the properties of the wastes, i.e., the maceral and microlithotype composition of the organic matter and its rank.Alteration of wastes also depends on the heating history, i.e., the rate of heating, final heating temperature, duration of heating, and the degree of air access. Although air is probably necessary to initiate and drive the heating processes, these usually take place under relatively oxygen depleted conditions. With slow heating, color of organic matter particles changes, irregular cracks and oxidation rims develop around edges and cracks, and bitumen is expelled. As a result, massive and detritic isotropic and strongly altered organic matter forms. On the other hand, higher heating rates cause the formation of devolatilization pores, oxidation rims around these pores and along cracks, vitrinite-bands-mantling particles, and bitumen expulsions.Organic compounds generated from the wastes include n-alkanes, iso-alkanes, alkylcyclohexanes, acyclic isoprenoids, mainly pristane, phytane and, in some cases, farnesane, sesquiterpanes, tri- and tetracyclic diterpanes, tri- and pentacyclic triterpanes, and steranes, polycyclic aromatic hydrocarbons (mostly with two- to five rings, rarely six rings), and phenols. The compounds formed change during the heating history. The fact that phenols are found in dumps where heating has not yet been completed, but are absent in those where heating ceased previously suggests the presence of water washing. The organic compounds formed may migrate within the dumps. However, when they migrate out of the dumps, they become a hazard to environment.This paper is a review on transformations of organic matter (both maceral composition and reflectance and chemical composition) in coal wastes deposited in coal waste dumps. Immediately after deposition the wastes are exposed to weathering conditions and sometimes undergo self heating processes.  相似文献   

The petrogenesis of granitoid rocks unusually rich in apatite in the Western Tatra Mts. (S-Poland, Western Carpathians)     

Krzysztof Szopa  Aleksandra Gawęda  Axel Müller  Magdalena Sikorska 《Mineralogy and Petrology》2013,107(4):609-627

In the bottom part of the tongue-shaped, layered granitoid intrusion, exposed in the Western Tatra Mts., apatite-rich granitic rocks occur as pseudo-layers and pockets between I-type hybrid mafic precursors and homogeneous S-type felsic granitoids. The apatite-rich rocks are peraluminous (ASI?=?1.12–1.61), with P₂O₅ contents ranging from 0.05 to 3.41 wt.% (<7.5 vol.% apatite), shoshonitic to high-K calc-alkaline. Apatite is present as long-prismatic zoned crystals (Ap₁) and as large xenomorphic unzoned crystals (Ap₂). Ap₁ apatite and biotite represent an early cumulate. Feldspar and Ap₂ textural relations may reflect the interaction of the crystal faces of both minerals and support a model based on local saturation of (P, Ca, F) versus (K, Na, Al, Si, Ba) in the border zones. Chondrite-normalized REE patterns for the apatite rocks and for pure apatite suggest apatite was a main REE carrier in these rocks. Minerals characteristics and the whole rock chemistry suggest both reduced S-type and I-type magma influenced the apatite-rich rocks. The field observations, mineral and rock chemistry as well as mass-balance calculations point out that the presence of apatite-rich rocks may be linked to the continuous mixing of felsic and mafic magmas, creating unique phosphorus- and aluminium-rich magma portions. Formation of these rocks was initially dominated by the complex flowage-controlled and to some extent also gravity-driven separation of early-formed zoned minerals and, subsequently, by local saturation in the border zones of growing feldspar and apatite crystals. Slow diffusion in the phosphorus-rich magma pockets favoured the local saturation and simultaneous crystallization of apatite and feldspars in a crystal-ladden melt.  相似文献   

Geothermal energy systems: research perspective for domestic energy provision   总被引：1，自引：1，他引：0  

Ernst Huenges  Thomas Kohl  Olaf Kolditz  Judith Bremer  Magdalena Scheck-Wenderoth  Thomas Vienken 《Environmental Earth Sciences》2013,70(8):3927-3933

  相似文献   

Impact of single inclined faults on the fluid flow and heat transport: results from 3-D finite element simulations   总被引：1，自引：1，他引：0  

Yvonne Cherubini  Mauro Cacace  Guido Blöcher  Magdalena Scheck-Wenderoth 《Environmental Earth Sciences》2013,70(8):3603-3618

The impact of inclined faults on the hydrothermal field is assessed by adding simplified structural settings to synthetic models. This study is innovative in carrying out numerical simulations because it integrates the real 3-D nature of flow influenced by a fault in a porous medium, thereby providing a useful tool for complex geothermal modelling. The 3-D simulations for the coupled fluid flow and heat transport processes are based on the finite element method. In the model, one geological layer is dissected by a dipping fault. Sensitivity analyses are conducted to quantify the effects of the fault’s transmissivity on the fluid flow and thermal field. Different fault models are compared with a model where no fault is present to evaluate the effect of varying fault transmissivity. The results show that faults have a significant impact on the hydrothermal field. Varying either the fault zone width or the fault permeability will result in relevant differences in the pressure, velocity and temperature field. A linear relationship between fault zone width and fluid velocity is found, indicating that velocities increase with decreasing widths. The faults act as preferential pathways for advective heat transport in case of highly transmissive faults, whereas almost no fluid may be transported through poorly transmissive faults.  相似文献   

Solar Microflares Observed by SphinX and RHESSI     

Tomasz Mrozek  Szymon Gburek  Marek Siarkowski  Barbara Sylwester  Janusz Sylwester  Anna Kepa  Magdalena Gryciuk 《Solar physics》2018,293(7):101

In 2009, the Russian Complex Orbital Observations Near-Earth of Activity of the Sun (CORONAS-Photon) spacecraft was launched, carrying the Polish Solar PHotometer In X-rays (SphinX). The SphinX was most sensitive in the spectral range 1.2?–?15 keV, thus an excellent opportunity appeared for comparison with the low-energy end of Ramaty High Energy Solar Spectroscopic Imager (RHESSI) spectra. Common spectral measurements with these instruments cover the range where most of the flare energy is accumulated. We have chosen four consecutive small solar events observed on 4 July 2009 at 13:43 UT, 13:48 UT, 13:52 UT, and 13:55 UT (RHESSI flare peak times) and used them to compare the data and results from the two instruments. Moreover, we included Geostationary Operational Environmental Satellite (GOES) records in our analysis. In practice, the range of comparison performed for SphinX and RHESSI is limited roughly to 3?–?6 keV. RHESSI fluxes measured with a use of one, four, and nine detectors in the 3?–?4 keV energy band agree with SphinX measurements. However, we observed that SphinX spectral irradiances are three times higher than those of RHESSI in the 4?–?6 keV energy band. This effect contributes to the difference in obtained emission measures, but the derived temperatures of plasma components are similar. RHESSI spectra were fitted using a model with two thermal components. We have found that the RHESSI hot component is in agreement with GOES, and the RHESSI hotter component fits the SphinX flaring component well. Moreover, we calculated the so-called thermodynamic measure and the total thermal energy content in the four microflares that we studied. The results obtained show that SphinX is a very sensitive complementary observatory for RHESSI and GOES.  相似文献   

Paleomagnetism of Carboniferous sediments from the West Sudetes (SW Poland)     

Kądziałko-Hofmokl  Magdalena  El-Hemaly  Ibrahim Aly 《Geologie en Mijnbouw》1997,76(1-2):97-104

The studied Carboniferous flysch and molasse sediments from the Intra-Sudetic Basin correspond to the period from Middle Visean to Early Autunian. Main magnetic minerals carrying the natural remanent magnetization (NRM) are goethite, magnetite, maghemite and hematite, all usually secondarily formed and/or remagnetized due to several tectonometamorphic events. In most samples several NRM components were isolated. One of them is usually a Jurassic-Triassic overprint. Some others define the Westphalian-Early Permian segment of the declination and inclination trajectory for the Sudetes calculated according to the reference apparent polar wander path for the Baltica plate. The Sudetic path is slightly shifted to the east compared to the reference path, suggesting the possibility of independent movements of the Sudetes during this time. The majority of isolated NRM components are secondary and related to the Sudetic orogenic phase and later tectonometamorphic activity.  相似文献   

Infection of Baltic herring (Clupea harengus membras) with Anisakis simplex larvae, 1992-1999: a statistical analysis using generalized linear models     

Podolska  Magdalena; Horbowy  Jan 《ICES Journal of Marine Science》2003,60(1):85-93

  相似文献   

Predictability of stemflow in a species‐rich tropical forest          下载免费PDF全文

Alexander Zimmermann  Magdalena Uber  Beate Zimmermann  Delphis F. Levia 《水文研究》2015,29(23):4947-4956

Numerous studies investigated the influence of abiotic (meteorological conditions) and biotic factors (tree characteristics) on stemflow generation. Although these studies identified the variables that influence stemflow volumes in simply structured forests, the combination of tree characteristics that allows a robust prediction of stemflow volumes in species‐rich forests is not well known. Many hydrological applications, however, require at least a rough estimate of stemflow volumes based on the characteristics of a forest stand. The need for robust predictions of stemflow motivated us to investigate the relationships between tree characteristics and stemflow volumes in a species‐rich tropical forest located in central Panama. Based on a sampling setup consisting of ten rainfall collectors, 300 throughfall samplers and 60 stemflow collectors and cumulated data comprising 26 rain events, we derive three main findings. Firstly, stemflow represents a minor hydrological component in the studied 1‐ha forest patch (1.0% of cumulated rainfall). Secondly, in the studied species‐rich forest, single tree characteristics are only weakly related to stemflow volumes. The influence of multiple tree parameters (e.g. crown diameter, presence of large epiphytes and inclination of branches) and the dependencies among these parameters require a multivariate approach to understand the generation of stemflow. Thirdly, predicting stemflow in species‐rich forests based on tree parameters is a difficult task. Although our best model can capture the variation in stemflow to some degree, a critical validation reveals that the model cannot provide robust predictions of stemflow. A reanalysis of data from previous studies in species‐rich forests corroborates this finding. Based on these results and considering that for most hydrological applications, stemflow is only one parameter among others to estimate, we advocate using the base model, i.e. the mean of the stemflow data, to quantify stemflow volumes for a given study area. Studies in species‐rich forests that wish to obtain predictions of stemflow based on tree parameters probably need to conduct a much more extensive sampling than currently implemented by most studies. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Lithosphere dynamics and sedimentary basins: the Arabian plate and analogues     

François Roure  Magdalena Scheck-Wenderoth  Abdullah Gahnoog  Tim Pharaoh 《Arabian Journal of Geosciences》2010,3(4):327-329

  相似文献