Mechanisms of partly flooded loose sand deposits     

Gerd?GudehusEmail author 《Acta Geotechnica》2016,11(3):505-517

Partly flooded loose sand deposits are left back from lignite mining, particularly in east Germany. After flooding, gas inclusions in macropores enhance the pore pressure increase by total stress cycles without drainage, and this can cause the transition into a kind of suspension. Thus, natural and technical changes of surface loads triggered flow slides in chain reactions of sometimes catastrophic extent. Such collapsible deposits were and are stabilized by blast-induced liquefaction and densification. Successive collapse fronts in flooded grain skeletons are seismogeneous, and this appears as wavering in the near-field and leads to power-law spectra in the far-field. Apart from this evidence of mild fractality, the wild fractality of chain reactions eludes mathematical treatment. Therefore, uncommon methods of geotechnical design, operations and monitoring are required.  相似文献   

Intrinsic groundwater vulnerability determination at the aquifer scale: a methodology coupling travel time estimation and rating methods     

Vassilios?Pisinaras  Christos?Polychronis  Alexandra?GemitziEmail author 《Environmental Earth Sciences》2016,75(1):85

Groundwater vulnerability has been subject of much research due to the valuable information it provides concerning groundwater protection and exploitation potential. Up to now, most groundwater vulnerability studies adopt subjective systems of rating the various factors and subsequently, their results are often ambiguous and contradicting. Within the present study a methodology for the estimation of intrinsic groundwater vulnerability at the aquifer scale is presented. The methodology is based on travel time estimation from specified sources of pollution to the aquifer. Besides the deterministic calculation of travel times, the methodology provides a rating system for each pollution source, based on its relative severity and the estimated threat that it poses to the aquifer. Therefore, it can be regarded as a hybrid method that couples the advantages provided by the physically based methods with those of the subjective rating systems. The methodology is applied to the Neon Sidirochorion aquifer, Northeastern Greece, an overexploited aquifer where river waters, sea waters and lake waters interact, causing groundwater quality deterioration to the aquifer. The results indicated that the proposed groundwater vulnerability assessment methodology is well capturing pollution related to saltwater intrusion and agricultural activities, while it is concluded that the conceptual model is significantly affecting the vulnerability assessment results and therefore has to be previously developed.  相似文献   

Estimation of air-overpressure produced by blasting operation through a neuro-genetic technique     

Edy?Tonnizam Mohamad  Danial?Jahed ArmaghaniEmail author  Mahdi?Hasanipanah  Bhatawdekar?Ramesh?Murlidhar  Mohd?Nur?Asmawisham?Alel 《Environmental Earth Sciences》2016,75(2):174

Blasting operations usually produce significant environmental problems which may cause severe damage to the nearby areas. Air-overpressure (AOp) is one of the most important environmental impacts of blasting operations which needs to be predicted and subsequently controlled to minimize the potential risk of damage. In order to solve AOp problem in Hulu Langat granite quarry site, Malaysia, three non-linear methods namely empirical, artificial neural network (ANN) and a hybrid model of genetic algorithm (GA)–ANN were developed in this study. To do this, 76 blasting operations were investigated and relevant blasting parameters were measured in the site. The most influential parameters on AOp namely maximum charge per delay and the distance from the blast-face were considered as model inputs or predictors. Using the five randomly selected datasets and considering the modeling procedure of each method, 15 models were constructed for all predictive techniques. Several performance indices including coefficient of determination (R ²), root mean square error and variance account for were utilized to check the performance capacity of the predictive methods. Considering these performance indices and using simple ranking method, the best models for AOp prediction were selected. It was found that the GA–ANN technique can provide higher performance capacity in predicting AOp compared to other predictive methods. This is due to the fact that the GA–ANN model can optimize the weights and biases of the network connection for training by ANN. In this study, GA–ANN is introduced as superior model for solving AOp problem in Hulu Langat site.  相似文献   

Sedimentology and Sequence Stratigraphy of Marine to Lacustrine Deltaic Deposits in a Craton Basin and Their Controlling Factors: Shan 2 Member–He 8 Member (Guadalupian–Lopingian, Permian), Southeast Ordos Basin, North China     

SHAN Xin  YU Xinghe  Peter ?CLIFT  LI Yalong  JIN Lin  SU Dongxu  DU Yonghui  ZHOU Jinsong  HAN Xiaoqin 《《地质学报》英文版》2018,92(1):268-285

  相似文献   

The Deep Carbon Cycle: Scientific Discoveries of the Deep Carbon Observatory     

Craig M. Schiffries  Andrea Johnson Mangum  Jennifer Mays  Michelle Hoon-Starr  Robert M. Hazen 《《地质学报》英文版》2018,92(Z1):5-5

  相似文献   

Evaluating Tidal Wetland Restoration Performance Using National Estuarine Research Reserve System Reference Sites and the Restoration Performance Index (RPI)     

Kenneth B. Raposa  Scott Lerberg  Craig Cornu  John Fear  Nina Garfield  Christopher Peter  Robin L.J. Weber  Gregg Moore  David Burdick  Michelle Dionne 《Estuaries and Coasts》2018,41(1):36-51

Evaluations of tidal wetland restoration efforts suffer from a lack of appropriate reference sites and standardized methods among projects. To help address these issues, the National Estuarine Research Reserve System (NERRS) and the NOAA Restoration Center engaged in a partnership to monitor ecological responses and evaluate 17 tidal wetland restoration projects associated with five reserves. The goals of this study were to (1) determine the level of restoration achieved at each project using the restoration performance index (RPI), which compares change in parameters over time between reference and restoration sites, (2) compare hydrologic and excavation restoration projects using the RPI, (3) identify key indicator parameters for assessing restoration effectiveness, and (4) evaluate the value of the NERRS as reference sites for local restoration projects. We found that the RPI, modified for this study, was an effective tool for evaluating relative differences in restoration performance; most projects achieved an intermediate level of restoration from 2008 to 2010, and two sites became very similar to their paired reference sites, indicating that the restoration efforts were highly effective. There were no differences in RPI scores between hydrologic and excavation restoration project types. Two abiotic parameters (marsh platform elevation and groundwater level) were significantly correlated with vegetation community structure and thus can potentially influence restoration performance. Our results highlight the value of the NERRS as reference sites for assessing tidal wetland restoration projects and provide improved guidance for scientists and restoration practitioners by highlighting the RPI as a trajectory analysis tool and identifying key monitoring parameters.  相似文献   

An orthotropic interface damage model for simulating drying processes in soils     

Osvaldo Manzoli  Marcelo Sánchez  Michael Maedo  Jumanah Hajjat  Leonardo J. N. Guimarães 《Acta Geotechnica》2018,13(5):1171-1186

The study of drying process in soils has received an increased attention in the last few years. This is very complex phenomenon that generally leads to the formation and propagation of desiccation cracks in the soil mass. In recent engineering applications, high aspect ratio elements have proved to be well suited to tackle this type of problem using finite elements. However, the modeling of interfaces between materials with orthotropic properties that generally exist in this type of problem using standard (isotropic) constitutive model is very complex and challenging in terms of the mesh generation, leading to very fine meshes that are intensive CPU demanding. A novel orthotropic interface mechanical model based on damage mechanics and capable of dealing with interfaces between materials in which the strength depends on the direction of analysis is proposed in this paper. The complete mathematical formulation is presented together with the algorithm suggested for its numerical implementation. Some simple yet challenging synthetic benchmarks are analyzed to explore the model capabilities. Laboratory tests using different textures at the contact surface between materials were conducted to evaluate the strengths of the interface in different directions. These experiments were then used to validate the proposed model. Finally, the approach is applied to simulate an actual desiccation test involving an orthotropic contact surface. In all the application cases the performance of the model was very satisfactory.  相似文献   

Formation by silicate–fluoride + phosphate melt immiscibility of REE-rich globular segregations within aplite dikes     

Charles?R.?SternEmail author  Julien?M.?Allaz  Markus?B.?Raschke  G.?Lang?Farmer  M.?Alexandra?Skewes  Jeremy?T.?Ross 《Contributions to Mineralogy and Petrology》2018,173(8):65

Aplite dikes intruding the Proterozoic 1.42(±?3) Ga Longs Peak-St. Vrain Silver Plume-type peraluminous granite near Jamestown, Colorado, contain F, P, and rare earth element (REE)-rich globular segregations, with 40–46% REE, 3.7–4.8 wt% P₂O₅, and 5–8 wt% F. A combination of textural features and geochemical data suggest that the aplite and REE-rich globular segregations co-existed as two co-genetic liquids prior to their crystallization, and we propose that they are formed by silicate–fluoride?+?phosphate (+?S?+?CO₂) melt immiscibility following ascent, cooling, and decompression of what was initially a single homogeneous magma that intruded the granite. The REE distribution coefficients between the silica-rich aplites and REE-rich segregations are in good agreement with experimentally determined distribution coefficients for immiscible silicate–fluoride?+?phosphate melts. Although monazite-(Ce) and uraninite U–Th–Pb microprobe ages for the segregations yield 1.420(±?25) and 1.442(±?8) Ga, respectively, thus suggesting a co-genetic relationship with their host granite, ε_Nd1.42Ga values for the granites and related granitic pegmatites range from ??3.3 to ??4.7 (average ??3.9), and differ from the values for both the aplites and REE-rich segregations, which range from ??1.0 to ??2.2 (average ??1.6). Furthermore, the granites and pegmatites have (La/Yb)_N <50 with significant negative Eu anomalies, which contrast with higher (La/Yb)_N >100 and absence of an Eu anomaly in both the aplites and segregations. These data are consistent with the aplite dikes and the REE-rich segregations they contain being co-genetic, but derived from a source different from that of the granite. The higher ε_Nd1.42Ga values for the aplites and REE-rich segregations suggest that the magma from which they separated had a more mafic and deeper, dryer and hotter source in the lower crust or upper mantle compared to the quartzo-feldspathic upper crustal source proposed for the Longs Peak-St. Vrain granite.  相似文献   

Carbon and nitrogen isotope,and mineral inclusion studies on the diamonds from the Pozanti–Karsanti chromitite,Turkey     

Dongyang?LianEmail authorView author&#;s OrcID profile  Jingsui?Yang  Michael?Wiedenbeck  Yildirim?Dilek  Alexander?Rocholl  Weiwei?Wu 《Contributions to Mineralogy and Petrology》2018,173(9):72

The Pozanti–Karsanti ophiolite (PKO) is one of the largest oceanic remnants in the Tauride belt, Turkey. Micro-diamonds were recovered from the podiform chromitites, and these diamonds were investigated based on morphology, color, cathodoluminescence, nitrogen content, carbon and nitrogen isotopes, internal structure and inclusions. The diamonds recovered from the PKO are mainly mixed-habit diamonds with sectors of different brightness under the cathodoluminescence images. The total δ¹³C range of the PKO diamonds varies between ??18.8 and ??28.4‰, with a principle δ¹³C mode at ??25‰. Nitrogen contents of the diamonds range from 7 to 541 ppm with a mean value of 171 ppm, and the δ¹⁵N values range from ??19.1 to 16.6‰, with a δ¹⁵N mode of ??9‰. Stacking faults and partial dislocations are commonly observed in the Transmission Electron Microscopy foils whereas inclusions are rather rare. Combinations of (Ca_0.81Mn_0.19)SiO₃, NiMnCo-alloy and nano-sized, quenched fluid phases were observed as inclusions in the PKO diamonds. We believe that the ¹³C-depleted carbon signature of the PKO diamonds derived from previously subducted crustal matter. These diamonds may have crystallized from C-saturated fluids in the asthenospheric mantle at depth below 250 km which were subsequently carried rapidly upward by asthenospheric melts.  相似文献   

Experimental study of quartz inclusions in garnet at pressures up to 3.0 GPa: evaluating validity of the quartz-in-garnet inclusion elastic thermobarometer     

Jay?B.?ThomasEmail authorView author&#;s OrcID profile  Frank?S.?Spear 《Contributions to Mineralogy and Petrology》2018,173(5):42

Garnet crystals with quartz inclusions were hydrothermally crystallized from oxide starting materials in piston–cylinder apparatuses at pressures from 0.5 to 3 GPa and temperatures ranging from 700 to 800 °C to study how entrapment conditions affect remnant pressures of quartz inclusions used for quartz-in-garnet (QuiG) elastic thermobarometry. Systematic changes of the 128, 206 and 464 cm^?1 Raman band frequencies of quartz were used to determine pressures of quartz inclusions in garnet using Raman spectroscopy calibrations that describe the P–T dependencies of Raman band shifts for quartz under hydrostatic pressure. Within analytical uncertainties, inclusion pressures calculated for each of the three Raman band frequencies are equivalent, which suggests that non-hydrostatic stress effects caused by elastic anisotropy in quartz are smaller than measurement errors. The experimental quartz inclusions have pressures ranging from ??0.351 to 1.247 GPa that span the range of values observed for quartz inclusions in garnets from natural rocks. Quartz inclusion pressures were used to model P–T conditions at which the inclusions could have been trapped. The accuracy of QuiG thermobarometry was evaluated by considering the differences between pressures measured during experiments and pressures calculated using published equation of state parameters for quartz and garnet. Our experimental results demonstrate that Raman measurements performed at room temperature can be used without corrections to estimate garnet crystallization pressures. Calculated entrapment pressures for quartz inclusions in garnet are less than ~?10% different from pressures measured during the experiments. Because the method is simple to apply with reasonable accuracy, we expect widespread usage of QuiG thermobarometry to estimate crystallization conditions for garnet-bearing silicic rocks.  相似文献