鱼类生长激素的体内代谢、分泌调控和作用机制研究的进展   总被引：3，自引：0，他引：3  

徐斌  张培军  李德尚 《海洋与湖沼》1997,28(3):328-333

主要对１９８３－１９９６年间关于鱼类生长激素的体内代谢、分泌调控和作用机制的研究进展予以综合评述。通过鱼类划性放射免疫测定法的建立和体风代谢动力学研究，证实，外源生长激素在鱼体内不会产生积累。鱼类生长激素的分泌调控受下丘脑分泌的生长激素释放因子（ＧＨＲＦ）和释放抑制因子（ＳＲＩＦ）的双重；促性腺激素释放激素（ＧｎＲＨ）、雌二醇（Ｅ２）、促甲状腺素释放激素（ＴＲＨ）和神经肽（ＮＹＰ）对鱼类生长激素的  相似文献   

机载雷达高度计对海况及海面风速的测量研究     

潘家祎  袁业立  姜景山  郑全安 《海洋与湖沼》1996,27(6):598-604

运用我国自行研制的ＺＨＧ－１型Ｘ波段机载雷达高度计于１９９５年４月１３日－４月１８日在青岛附近海域进行的海上飞行实验数据，及导出的均方根波高、有效波高、均方根波陡算法模型，得到了上述海况参数值。  相似文献   

廉州湾及其邻近水域初级生产力研究     

吕瑞华  夏滨  毛兴华 《海洋科学进展》1995,(2)

１９９２～１９９３年，在对廉州湾及其邻近海域的环境调查中，首次对该海区叶绿素ａ与初级生产力进行了测定。获得叶绿素ａ的春季平均值为１．００ｍｇ·ｍ－３，秋季为０．２９ｍｇ·ｍ－３，初级生产力的平均值为３０１．５ｍｇ·ｍ－２·ｄ－１。文章对调查区初级生产力的分布特征及变化规律进行了探讨，并与北方沿海的初级生产力水平进行了比较。  相似文献   

黄海的风、潮混合特征及其对冷水团边界的影响     

赵保仁  曹德明  潘海  涂登志 《海洋科学集刊》1994,(35):1-10

本文第一作者早在1985年就提出,潮混合效应控制着夏季黄海冷水团的边界及海面冷水分布(赵保仁,1985)。1987年又进一步通过水文调査资料和卫星图片给出了黄海周围的浅水陆架锋(或称潮汐锋)的分布及强锋区的跨锋断面中的温度、盐度和坏流结构特征,并指出夏季的黄海沿岸流在性质上属沿锋面运动的强流(赵保仁,1987a,b),而后又对黄海西部的陆架锋进行了一次专门调査(赵保仁等,1991)。此外,他还指出黄海的强温跃层的形成和转移现象也与潮混合现象密切相关(赵保仁,1989)。因此,研究潮混合现象对阐明发生在黄海的多水文物理现象都是至关重要的。 为深入了解黄海的潮混合特征,作者把渤海、黄海和东海作为一个整体完成了一次精度较高的潮汐、溯流数值计算,在潮汐、潮流的分布方面,揭示了前人尚未阐明的一些特征。本文根据这些数值结果,计算了近最大潮流流速和层化参数,阐明了渤海、黄海和东海的潮混合特征及其对降温期黄海冷水团分布变化的影响。此外,还用 Sim pson等人(1981)的能量模式计算了南黄海西部的风、潮混合效率。  相似文献   

Robust adaptive control of underactuated ships on a linear course with comfort     

K. D. Do  J. Pan  Z. P. Jiang   《Ocean Engineering》2003,30(17):2201-2225

This paper addresses an important problem in ship control application—the robust stabilization of underactuated ships on a linear course with comfort. Specifically, we develop a multivariable controller to stabilize ocean surface ships without a sway actuator on a linear course and to reduce roll and pitch simultaneously. The controller adapts to unknown parameters of the ship and constant environmental disturbances induced by wave, ocean current and wind. It is also robust to time-varying environmental disturbances, time-varying change in ship parameters and other motions of the ship such as surge and heave. The roll and pitch can be made arbitrarily small while the heading angle and sway are kept to be in reasonably small bounds. The controller development is based on Lyapunov’s direct method and backstepping technique. A Lipschitz continuous projection algorithm is used to update the estimate of the unknown parameters to avoid the parameters’ drift due to time-varying environmental disturbances. Simulations on a full-scale catamaran illustrate the effectiveness of our proposed controller.  相似文献   

分潮波模型多资料数值计算方法研究　Ⅱ.有限差分最小二乘方法     

潘文波  孙文心  王骥 《中国海洋大学学报(自然科学版)》1996,(2)

对含多资料的分潮波模型的超定问题进行探讨，建立一种有限差分—最小二乘方法，该方法使得岸边资料直接进入了计算方程，并保证岸界法向流速为零条件。通过对渤海的四大分潮的试算，证实本方法可行。  相似文献   

Numerical and simplified methods for the calculation of the total horizontal wave force on a perforated caisson with a top cover     

Xuefeng Chen  Yucheng Li  Bin Teng 《Coastal Engineering》2007

The VOF method and the k–ε model, combined with the equation of state of air at constant temperature, have been used to calculate the total horizontal wave force caused by monochromatic waves acting on a perforated caisson with a top cover. From comparison of various parameters, such as the total horizontal force, the pressure difference on the front wall, the pressure on the back wall and the pressure on the top cover, between the numerical results and test data, it can be seen that the numerical results agree well with the test data. It is concluded that the method described in this paper can be utilized to calculate wave forces acting on perforated caissons with a top cover in the case of nonovertopping, nonbreaking waves. A simplified method to calculate the total horizontal force has been developed, based on test data, using a least-squares method. A comparison between the numerical results and the values calculated from the simplified equations shows good agreement. Therefore the simplified equations can be used in engineering applications to evaluate the total horizontal force on a perforated caisson with a top cover.  相似文献   

完善综合监测预警系统提高海洋环境监控能力          下载免费PDF全文

石斌  葛海祥  王荣平 《海洋开发与管理》2006,23(3):39-42

自1996年江苏省实施“海上苏东”战略以来,南通市海洋经济以年均16%以上的增长率迅速发展,至2004年,全市海洋经济总产值达到226亿元,海洋经济已成为南通市国民经济发展的一条亮丽的风景线。然而,当前全市海洋经济占比达43.6%的海洋渔业经济遭受了极大挑战。2004年,南通市海洋渔业两大主导产品——条斑紫菜与文蛤同期发生重大病灾,造成经济损失1亿余元。群发性上访等事件给整个社会带来了诸多不稳定因素,海洋渔业经济的管理也陷入了被动应付的困境。引发紫菜与文蛤重大病灾的因子较多,海洋生态环境恶化是其中一个极为重要的因素。面对海洋渔…  相似文献   

Optimal Design for Main Dimensions of a 75000t Floating Production and Storage Vessel     

Tan Jiahua  Ma Wei  Pan Bin Associate Professor  Shanghai Jiao Tong University  Shanghai Lecturer  shanghai Jiao Tong University  Shanghai 《中国海洋工程》1992,(1)

The basis, process and results of the demonstration of the main dimensions of a 75000t floating production and storage vessel are discussed in this paper. A simple but reliable orthogonal design method is applied in the main dimension optimization. The ideas of gradual approximation and feedback from various aspects are put into effect. During the demonstration, in order to make the model tally with the actual situation, the draft design is closely related to the computational analysis, so that the demonstration model can be verified at any time; the handling of the overall system is closely related to the research of each item, which is beneficial not only to the mastery of various regularities, but also to the balance of decisions. Finally, according to the computational results and the regularities obtained from analysis, the main dimensions are determined.  相似文献   

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method     

赵明  滕斌 《中国海洋工程》2004,18(2):267-280

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.  相似文献