Pullout Response of Uniaxial Geogrid in Tire Shred–Sand Mixtures     

Umashankar Balunaini  Sungmin Yoon  Monica Prezzi  Rodrigo Salgado 《Geotechnical and Geological Engineering》2014,32(2):505-523

Use of tire shred–soil mixtures as backfill materials in mechanically stabilized earth walls has several advantages over other backfill materials: (1) good drainage, (2) high shear strength, and (3) low compacted unit weight. This paper presents the results of laboratory pullout tests performed on uniaxial geogrid embedded in tire shred–sand mixtures. The effects of tire shred size, tire shred–sand mixing ratio and confining pressure on the interaction between the geogrid and tire shred–sand mixtures are evaluated. Three sizes of tire shreds are considered: tire chips (with 9.5 mm nominal size), tire shreds 50-to-100 mm long and tire shreds 100-to-200 mm in length, with mixing ratios of 0, 12, 25 and 100 % of tire shreds in the mixtures (by weight). Based on compaction testing of a number of mixtures, the optimal mixing proportion of tire shreds and sand was found to lie between 25/75 and 30/70 (by weight of tire shred and sand); this is equivalent to approximately 40/60 and 50/50, respectively, by volume of tire shreds and sand. The pullout resistance of a geogrid embedded in tire shred–sand mixtures is significantly higher than that of the same geogrid embedded in tire shreds only. The size of the tire shreds has negligible effect on the pullout resistance of a geogrid embedded in mixtures prepared with either low (12/88 mix) or high (100/0 mix) tire shred content. However, when the 25/75 mixture is used, greater geogrid pullout resistance was obtained for the geogrid embedded in tire chip–sand mixtures than in tire shred–sand mixtures.  相似文献   

Lessons learned from two case histories of seismic microzonation in Italy     

Filippo Santucci de Magistris  Anna d’Onofrio  Augusto Penna  Rodolfo Puglia  Francesco Silvestri 《Natural Hazards》2014,74(3):2005-2035

The prediction of the variability of the seismic ground motion in a given built-up area is considered an effective tool to plan appropriate urban development, to undertake actions on seismic risk mitigation and to understand the damage pattern caused by a strong-motion event. The procedures for studying the seismic response and the seismic microzonation of an urban area are well established; nevertheless, some controversial points still exists and are discussed here. In this paper, the selection of a reference input motion, the construction of a subsoil model and the seismic response analysis procedures are discussed in detail, based on the authors’ experience in two Italian case histories: the seismic microzonation of the city of Benevento, which was a predictive study, and the simulation of seismic response and damage distribution in the village of San Giuliano di Puglia, which was a retrospective analysis.  相似文献   

An investigation of gravitational lens determinations of H₀ in quintessence cosmologies     

Geraint F. Lewis †  Rodrigo A. Ibata 《Monthly notices of the Royal Astronomical Society》2002,337(1):26-33

There is growing evidence that the majority of the energy density of the Universe is not baryonic or dark matter, but rather it resides in an exotic component with negative pressure. The nature of this 'quintessence' influences our view of the Universe, modifying angular diameter and luminosity distances. Here, we examine the influence of a quintessence component upon gravitational lens time-delays. As well as a static quintessence component, an evolving equation of state is also considered. It is found that the equation of state of the quintessence component and its evolution influence the value of the Hubble constant derived from gravitational lenses. However, the differences between evolving and non-evolving cosmologies are relatively small. We undertake a suite of Monte Carlo simulations to examine the potential constraints that can be placed on the universal equation of state from the monitoring of gravitational lens systems, and demonstrate that at least an order of magnitude more lenses than currently known will have to be discovered and analysed to accurately probe any quintessence component.  相似文献   

The radio properties of the cD galaxy of Abell 2390     

Pedro Augusto  Alastair C. Edge  Claire J. Chandler 《Monthly notices of the Royal Astronomical Society》2006,367(1):366-374

We present multifrequency, multi-epoch radio imaging of the complex radio source B2151+174 in the core of the cluster, Abell 2390  ( z ≃ 0.23)  . From new and literature data, we conclude that the Faranoff–Riley type II (FRII)-powerful radio source is the combination of a compact, core-dominated 'medium-sized symmetric object' (MSO) with a more extended, steeper spectrum mini-halo. B2151+174 is unusual in a number of important aspects. (i) It is one of the most compact and flat spectrum sources in a cluster core known; (ii) it shows a complex, compact twin-jet structure in a north–south orientation; (iii) the orientation of the jets is 45° misaligned with apparent structure (ionization cones and dust disc) of the host galaxy on larger scales. Since the twin-jet of the MSO has its northern half with an apparent 'twist', it might be that precession of the central supermassive black hole explains this misalignment. B2151+174 may be an example of the early stage (10³–10⁴ yr duration) of a 'bubble' being blown into the intracluster medium where the plasma has yet to expand.  相似文献   

Tectonic rotations in the Late Palaeozoic continental margin of southern South America determined and dated by palaeomagnetism     

Augusto E. Rapalini  Juan F. Vilas 《Geophysical Journal International》1991,107(2):333-351

  相似文献   

On the Use of Random Material in Dam Cores: Case of the Manso Dam,Brazil     

Ferreira  Breno S.  Almeida  Marcio S. S.  Lopes  Francisco R.  Reis Cavalcanti  Maria do Carmo  Pires Filho  Celso José 《Geotechnical and Geological Engineering》2022,40(4):1973-1987

Geotechnical and Geological Engineering - The Manso Dam, in the Brazilian State of Mato Grosso, intended for flood control and electricity generation, was built by a state-owned energy company in...  相似文献   

Tectonic control of accommodation space and sediment supply within the Mata Amarilla Formation (lower Upper Cretaceous) Patagonia,Argentina          下载免费PDF全文

Augusto N. Varela 《Sedimentology》2015,62(3):867-896

The Mata Amarilla Formation dates from the early Upper Cretaceous and was deposited during a transition in tectonic regime from the extensional Rocas Verdes Basin to the Austral Foreland Basin. Detailed sedimentological logs and architectural parameters were used to define 13 facies associations. The distribution of facies associations and associated variations in fluvial architecture have enabled large‐scale changes in accommodation space/sediment supply ratios (A/S ratio) to be defined for the three component sections of the Mata Amarilla Formation. The lower and upper sections are characterized by a high A/S ratio, whereas the middle section corresponds to a low A/S ratio. In the western part of the study area, small‐scale variations in the A/S ratio were recognized in the middle section. The strong west to east trend in evolution of the fluvial systems coincides with the direction of propagation of the Patagonian fold and thrust belt, which is located to the west of the study area. Intervals of high A/S ratio (i.e. lower and upper sections) are interpreted to have developed during periods of increased loading by the fold and thrust belt caused by tectonic uplift. In contrast, intervals of low A/S ratio (i.e. middle section) were developed during periods of tectonic quiescence. This article suggests that the large‐scale variations in A/S ratios are related to different rates of migration and growth of the Patagonian fold and thrust belt, whereas the small‐scale variation occurred in response to specific periods of thrusting and folding in the Patagonian fold and thrust belt (i.e. local loads). This field example of the effects of different scales of variation in A/S ratios across the Austral Foreland Basin could be used to recognize similar tectonically forced variations in stratigraphic architecture in other foreland basins throughout the world, as well as to understand the response of fluvial systems to such changes.  相似文献   

Diagenetic evolution of Aptian evaporites in the Namibe Basin (south‐west Angola)          下载免费PDF全文

Laurent Gindre‐Chanu  John K. Warren  Cai Puigdefabregas  Ian R. Sharp  David C. P. Peacock  Roger Swart  Ragnar Poulsen  Hercinda Ferreira  Lourenco Henrique 《Sedimentology》2015,62(1):204-233

The widespread and dissected nature of the Angolan gypsiferous salt residuals offers a uniquely detailed view of the lateral and vertical relations inherent to secondary evaporite textures, which typify exhumed salt masses worldwide. Such secondary textures are sometimes misinterpreted as primary evaporite textures. Thin, metre‐scale and patchy, dome‐like gypsum accumulations are well‐exposed within strongly incised present‐day river valleys along the eastern margin of the Namibe and Benguela basins (south‐west Angola). These sections are time equivalent to the main basinward subsurface evaporites (Aptian Loeme Formation) which mostly consist of halite. The gypsum (here called the Bambata Formation) is interpreted to represent the final residual product of fractional dissolution and recrystallization of the halite mass that occurred during Late Cretaceous margin uplift and continues today. This halite underwent multiple episodes of diagenetic alteration between its deposition and its final exhumation, leading to the formation of various secondary gypsum fabrics and solution‐related karst and breccia textures that typify the current evaporite outcrop. Four different diagenetic gypsum fabrics are defined: thinly bedded alabastrine, nodular alabastrine, displacive selenite rosettes and fibrous satin‐spar gypsum. Current arid conditions are responsible for a thin weathered crust developed at the top of the outcropping gypsum, but the fabrics in the main core of the current at‐surface evaporite unit mostly formed during the telogenetic stage of uplift prior to complete subaerial exposure. Alteration occurred as various dissolving and rehydrating saline minerals encountered shallow aquifers in the active phreatic and vadose zones. Geomorphological and petrographic analyses, mostly based on the cross‐cutting relations and crystallographic patterns in the outcrop, are used to propose a sequence of formation of these different fabrics.  相似文献   

Climate change impacts on invasive potential of pink hibiscus mealybug, Maconellicoccus hirsutus (Green), in Chile     

Valentina Jara  Francisco J. Meza  Tania Zaviezo  Rodrigo Chorbadjian 《Climatic change》2013,117(1-2):305-317

Maconellicoccus hirsutus (Green) (Hemiptera:Pseudoccidae) is an important pest in many countries being responsible for considerable economic loses. Although it is not currently present in Chile, the chance that it could be accidentally introduced rises with the list of infested countries increasing over the last years. In addition, climate change projections indicate that a larger region would fit as potential habitat for this pest, allowing it to persist over time and colonize a larger proportion of the Chilean territory. In this study the geographic distribution and the number of generations this mealybug would develop in Chile were determined, under current temperatures and under two projected climatic scenarios. Cumulative degree days were calculated for current and future scenarios using a lower temperature threshold of 14.5 °C, with 624.5 degree-days as the thermal requirement for the species to complete one generation. The results show that under current climate conditions M. hirsutus could develop up to three generations in the north of the country (i.e. 18° South) and one generation in the region near 37° South. Under future scenarios’ conditions the pest could develop up to five generations in the north, and one generation around the 42° South. Present climate conditions in Chile would allow the establishment of the pink hibiscus mealybug, if the pest enters the country. Climate change conditions would allow the potentially invaded area to expand south, and would promote the development of more generations per year of the mealybug in the studied territory.  相似文献   

Top-down and bottom-up modelling to support low-carbon scenarios: climate policy implications     

Patricia Fortes  Sofia Simões  Júlia Seixas  Denise Van Regemorter  Francisco Ferreira 《Climate Policy》2013,13(3):285-304

Bottom-up and top-down models are used to support climate policies, to identify the options required to meet GHG abatement targets and to evaluate their economic impact. Some studies have shown that the GHG mitigation options provided by economic top-down and technological bottom-up models tend to vary. One reason for this is that these models tend to use different baseline scenarios. The bottom-up TIMES_PT and the top-down computable general equilibrium GEM-E3_PT models are examined using a common baseline scenario to calibrate them, and the extend of their different mitigation options and its relevant to domestic policy making are assessed. Three low-carbon scenarios for Portugal until 2050 are generated, each with different GHG reduction targets. Both models suggest close mitigation options and locate the largest mitigation potential to energy supply. However, the models suggest different mitigation options for the end-use sectors: GEM-E3_PT focuses more on energy efficiency, while TIMES_PT relies on decrease carbon intensity due to a shift to electricity. Although a common baseline scenario cannot be ignored, the models’ inherent characteristics are the main factor for the different outcomes, thereby highlighting different mitigation options.

Policy relevance

The relevance of modelling tools used to support the design of domestic climate policies is assessed by evaluating the mitigation options suggested by a bottom-up and a top-down model. The different outcomes of each model are significant for climate policy design since each suggest different mitigation options like end-use energy efficiency and the promotion of low-carbon technologies. Policy makers should carefully select the modelling tool used to support their policies. The specific modelling structures of each model make them more appropriate to address certain policy questions than others. Using both modelling approaches for policy support can therefore bring added value and result in more robust climate policy design. Although the results are specific for Portugal, the insights provided by the analysis of both models can be extended to, and used in the climate policy decisions of, other countries.  相似文献