东昆仑五龙沟金矿田控矿构造带的变形条件——来自EBSD组构的启示   总被引：1，自引：0，他引：1  

陈柏林  张昊  陈建林  王永  王铜  韩玉  张延林 《地球学报》2018,39(1):1-13

五龙沟金矿田是东昆仑地区最重要的金矿集中区之一,金矿田主要控矿构造为偏脆性断裂破碎带,在三条控矿构造带中仅在萤石沟—红旗沟构造带邻近北侧的局部出露韧性变形带。本文作者运用电子背散射衍射技术(EBSD)技术方法,对东昆仑五龙沟金矿田萤石沟—红旗沟构造带变形岩石的组构分析显示,花岗质糜棱岩韧性变形强烈,大部分样品石英变形机制是以中温I级柱面(1010)1120滑移为主,变形式样比较单一;少量样品为中高温II级柱面(101—0)0001滑移和中低温底面(0001)112—0滑移。从岩石组构特点结合宏观构造分析,五龙沟金矿田萤石沟—红旗沟构造带及其邻近北侧经历了中-中深层次、中-中高温条件(15~25 km,t=350~550°C,P=0.40~0.60 Gpa)的韧性变形,局部叠加中浅层次、中低温条件(10~15 km,t=250~350°C,P=0.25~0.40 Gpa)的韧脆性变形;而岩金沟和三道梁—苦水泉构造带为低温低压条件的脆性破碎带。结合变形花岗闪长岩年代学资料,确定构造变形时代为早中生代。  相似文献   

新疆西南天山阿万达金矿区赋矿围岩物源及形成时代:碎屑锆石U-Pb年代学制约          下载免费PDF全文

付宇  丁清峰  吴昌志 《高校地质学报》2018,24(3):353

阿万达金矿位于西南天山造山带内。此次研究在简要总结其矿床地质特征基础上,对与阿万达金矿成矿密切相关的阿克苏群中硅质片岩围岩分别进行了岩石地球化学分析和LA-ICP-MS碎屑锆石U-Pb定年研究,以期对围岩的沉积环境、物源及形成时代进行讨论。岩石地球化学分析结果显示,阿万达金矿赋矿围岩中硅质片岩的原岩可能为一套成熟度较低的泥岩或砂岩,物源主要为石英岩质沉积物,沉积环境可能处于活动大陆弧内的沉积盆地内。U-Pb定年结果显示,其碎屑锆石定年数据主要形成了加权平均年龄值为405 Ma或406 Ma的年龄峰,其谐和年龄最小峰值即405 Ma可以作为其最大沉积年龄。因此笔者认为阿克苏群中硅质片岩的沉积时代并不是前人所定的长城纪,而是不老于早泥盆世。另外,这一地层的物源组成具有多样性,～405 Ma碎屑锆石占主体,可能与哈尔克山北缘火山弧内的早泥盆世岩浆活动有关;～745Ma的碎屑锆石的出现,表明其物源有少部分来自新元古代岩石;极少数～2.50 Ga的碎屑锆石的出现,反映了华北地台对本地层有物源上的贡献。  相似文献   

An Introduction of the Projects Administrated by the Environmental Geosciences,Department of Earth Sciences,National Natural Science Foundation of China in 2018     

Liu Yu  Zhang Qianru  Wang Jun  Liu Xiaomang  Liu Jinfeng  Zhu Honghu  Zhou Zhixiang  Pu Shengyan  Wei Xiaorong 《地球科学进展》2018,33(12):1297-1304

  相似文献   

丹阳天王寺边坡稳定性评价及防治措施     

余成  葛伟亚  常晓军 《江苏地质》2018,42(2):345-348

针对苏南地区典型露采边坡的地层岩性及地质构造特点,以极限平衡理论为基础,运用GeoStudio软件中的SLOPE/W模块和VADOSE/W模块计算分析江苏丹阳天王寺边坡在天然工况、暴雨工况及地震工况下的稳定性。结果表明:天然工况下,潜在滑动面分布范围最小,稳定性最高,存在滑动的危险性;暴雨工况下,潜在滑动面分布范围有所增大,稳定性降低,边坡滑动的可能性较大;地震工况下,潜在滑动面分布范围最广,稳定性最低,边坡滑动的可能性很大。基于上述结果,提出防治措施。  相似文献   

皖南宁国竹溪岭钨银矿床及相关岩体的同位素地质年龄     

黄马  徐晓春  谢巧勤  韦导忠  徐生发  王德恩 《大地构造与成矿学》2018,(2):279-290

皖南宁国竹溪岭钨银矿床是近年来发现的一个与花岗岩类有关的矽卡岩型矿床,准确厘定其成矿年龄及相关侵入岩体的年龄有利于深入认识区域岩浆作用与成矿作用的规律。本文在矿床地质调查的基础上,应用现代同位素定年技术开展地质年代学研究,获得矿床矿石中的辉钼矿Re-Os模式年龄为142.7±2.1 Ma和142.9±2.1 Ma,相关侵入岩体花岗闪长岩、花岗斑岩和花岗闪长斑岩的LA-ICP-MS锆石U-Pb年龄分别为139.8±1.8 Ma、143.3±1.9 Ma、140.2±1.7 Ma,显示矿床的成矿年龄与侵入岩体的成岩年龄基本一致,为燕山晚期早白垩世。矿床矿石中的辉钼矿的Re含量指示成矿物质来源于地壳和地幔的混合;与成矿相关侵入岩的稀土元素和Hf同位素组成特征指示成岩物质也具有壳幔混源特征,显示成矿物质来源与成岩物质来源具有一致性。区域岩浆岩和矿床的对比表明,与之相邻的长江中下游地区、浙西地区和赣东北地区乃至整个华南地区这一时期发生了大规模的岩浆作用和钨锡多金属成矿作用,显示扬子板块在此阶段处于岩浆–成矿大爆发时期,皖南地区的成矿时代对应于华南中生代三次大规模岩浆作用和成矿作用的第二阶段。  相似文献   

New Discovery of Red Paleosols with Calcite and Zeolitic Rhizoliths in the Late Cretaceous Yaojia Formation, Southern Songliao Basin, NE China     

ZHANG Li  BAO Zhidong  DOU Luxing  WANG Hongjun  JI Yu 《《地质学报》英文版》2018,92(6):2462-2463

  相似文献   

Development Phases and Mechanisms of Tectonic Fractures in the Longmaxi Formation Shale of the Dingshan Area in Southeast Sichuan Basin, China     

FAN Cunhui  HE Shun  ZHANG Yu  QIN Qirong  ZHONG Cheng 《《地质学报》英文版》2018,92(6):2351-2366

Shale gas has currently attracted much attention during oil and gas exploration and development. Fractures in shale have an important influence on the enrichment and preservation of shale gas. This work studied the developmental period and formation mechanism of tectonic fractures in the Longmaxi Formation shale in the Dingshan area of ??southeastern Sichuan Basin based on extensive observations of outcrops and cores, rock acoustic emission (Kaiser) experiments, homogenization temperature of fracture fill inclusions, apatite fission track, thermal burial history. The research shows that the fracture types of the Longmaxi Formation include tectonic fractures, diagenetic fractures and horizontal slip fractures. The main types are tectonic high-angle shear and horizontal slip fractures, with small openings, large spacing, low densities, and high degrees of filling. Six dominant directions of the fractures after correction by plane included NWW, nearly SN, NNW, NEE, nearly EW and NW. The analysis of field fracture stage and fracture system of the borehole suggests that the fractures in the Longmaxi Formation could be paired with two sets of plane X-shaped conjugate shear fractures, i.e., profile X-shaped conjugate shear fractures and extension fractures. The combination of qualitative geological analysis and quantitative experimental testing techniques indicates that the tectonic fractures in the Longmaxi Formation have undergone three periods of tectonic movement, namely mid-late Yanshanian movement (82–71.1 Ma), late Yanshanian and middle Himalaya movements (71.1–22.3 Ma), and the late Himalayan movement (22.3–0 Ma). The middle-late period of the Yanshanian movement and end of the Yanshanian movement-middle period of the Himalayan movement were the main fracture-forming periods. The fractures were mostly filled with minerals, such as calcite and siliceous. The homogenization temperature of fracture fill inclusions was high, and the paleo-stress value was large; the tectonic movement from the late to present period was mainly a slight transformation and superposition of existing fractures and tectonic systems. Based on the principle of tectonic analysis and theory of geomechanics, we clarified the mechanism of the fractures in the Longmaxi Formation, and established the genetic model of the Longmaxi Formation. The research on the qualitative and quantitative techniques of the fracture-phase study could be effectively used to analyze the causes of the marine shale gas fractures in the Sichuan Basin. The research findings and results provide important references and technical support for further exploration and development of marine shale gas in South China.  相似文献   

Two Phases of Mineralization in the Dabaoshan Polymetallic Deposit,Guangdong Province: Constraints from Re-Os Geochronology of Black Carbonaceous Mudstone and MolybdeniteEI北大核心CSCD     

Xiang J.  Liang X.  Shan Y.  Wang C.  Dong C.  Yu S.  Tan Z. 《大地构造与成矿学》2018,(4):732-745

The Dabaoshan polymetallic deposit is a polygenetic composite ore deposit located at south of the Qinhang (Qinzhou-Hangzhou) Metallogenic Belt, which is composed mainly of SEDEX type Cu-Pb-Zn and porphyry-skarn type W-Mo orebodies. Systematic field study shows that the W-Mo mineralization exhibits as quartz-vein type and skarn type orebodies around the granodioritic porphyry, or superimposes on the SEDEX type Cu-Pb-Zn orebody, while the Cu-Pb-Zn mineralization occurs mainly in the Qiziqiao Formation as stratiform-substratiform type and breccia type orebodies with typical SEDEX-type characteristics. Re-Os dating of five molybdenite separates from porphyry-skarn type W-Mo orebodies yielded isochron ages of 163.6±1.0 Ma (MSWD=0.58), which represents the age of W-Mo mineralization. Re-Os dating of seven black carbonaceous mudstone samples from a Cu-Pb-Zn orebody yielded isochron age of 387.6±9.9 Ma (MSWD=56), which is interpreted to be the age of SEDEX-type Cu-Pb-Zn mineralization. These ages indicate that there are at least two stages of ore mineralization in the Dabaoshan polymetallic deposit. The W-Mo mineralization is related to the Yanshanian intermediated-acidic intrusions, while the stratiform-substratiform SEDEX-type Cu-Pb-Zn mineralization is associated with the Hercynian seafloor hydrothermal activities. © 2018, Science Press. All right reserved.  相似文献   

香溪河流域岩溶洞穴发育与分布特征   总被引：3，自引：3，他引：0  

罗利川  梁杏  周宏  谢凯  陈标典 《中国岩溶》2018,37(3):450-461

结合1∶5万水文地质调查,对香溪河岩溶流域溶洞特征进行了探究,统计其溶洞的规模、形态、发育地层、发育方向及分布高程,结果表明:该区洞穴规模中等,受岩性的控制,溶洞的发育表现出对碳酸盐岩岩组类型的选择性,其中寒武-奥陶系地层溶洞发育程度最高;溶洞的发育方向多为北北东和北北西向,与区域构造线一致,同时受本区构造运动间歇性抬升的影响,溶洞集中发育于4个高程区;从溶洞发育的构造部位来看,溶洞主要分布在宽缓向斜的东南翼及向斜核部,平面分布表现出分带性;该区溶洞多发育至早期就停止进一步发育,其规模、类型、分布特征等与鄂西南地区溶洞均存在差异。   相似文献   

川滇黔邻区龙马溪组页岩气富集主控因素与勘探方向   总被引：2，自引：2，他引：0       下载免费PDF全文

汪正江  余谦  杨平  刘伟  杨菲  刘家洪  熊国庆  何江林  邓奇 《沉积与特提斯地质》2018,38(3):1-15

中国的页岩气资源评价必须立足于中国主要陆块的地质条件与构造演化特点之上,对于不同层系、不同地区的页岩气选区评价,也必须抓住关键因素。川滇黔邻区的五峰组-龙马溪组富有机质页岩发育,但保存条件较渝东南地区更为复杂。印支期以来,该区经历了多期次构造应力场转换,断裂、褶皱发育,因此,建立针对性的页岩气选区评价参数体系是该区页岩气勘探走出困局的当务之急。本文在分析该区已有页岩气钻井成效的基础上,立足于扬子海相层系页岩气勘探应是基于保存条件的"连续型甜点区"的选区评价基本思路,结合前人研究成果,系统梳理出一套评价指标体系。该体系涵盖5大因素(区域盖层、直接盖层、底板条件、页岩层自身条件、构造改造强度)、4个等级、17个选区评价参数。另外,根据已有相关钻井数据,总结提出了5个页岩气层评价表征参数(含气量、孔隙度、电阻率、氮气组分含量和压力系数)。根据该指标体系,对川滇黔邻区的主要构造单元进行了梳理分析,优选出5个有利区,提出了各有利区的首选可能突破点。本研究对复杂构造区页岩气有利区带优选具有一定的指导意义。  相似文献