Developing the pore water pressures in loose to medium sands below the water table may lead to liquefaction during earthquakes. The simulation of liquefaction (cyclic mobility and flow liquefaction) in sandy soils is one of the major challenges in constitutive modeling of soils. This paper presents the simulation of sand behavior using a critical state bounding surface plasticity model (Dafalias and Manzari’s model, 2004) during monotonic and cyclic loading. The drained, undrained, and cyclic triaxial tests were simulated using Dafalias and Manzari’s model. The simulation results showed that the model predicts behavior of sand, reasonably well. Also, for CSR?<?0.2, number of cycles for liquefaction is significantly increased. The residual strength of Babolsar sand is produced when it is deformed to an axial strain of 20 to 25%. 相似文献
Dust storms are among natural and anthropogenic hazards for socioeconomic resources, especially in desert regions. In recent years, dust storms have become a serious problem, especially in desert regions of Iran. This study investigates temporal and spatial variation of dust storm frequency in desert regions of Iran. The number of dusty days (NDD) are collected from 22 stations across the region. The statistical analysis of NDD time series is carried out to show both spatial and seasonal pattern of dust storm occurrence in the region. The regional map of statistical characteristics indicates a north to south increasing dust storm frequency. The spatial map also reveals higher year-to-year variation in south eastern Iran. The seasonality of NDD shows the highest frequency for summer followed by the spring and autumn seasons. The popular Mann–Kendall and the bootstrap MK test to consider serial correlation are then applied for Trend assessment. Results showed both negative (across the north and northwestern regions) and positive trend (across south and south eastern regions) in the annual and seasonal NDD time series. This north-to-south gradient in the spatial and temporal frequency NDD may arise from harsh dry and gusty winds as well as intense land use change in the south eastern territories of Iran. However, more careful and detailed studies are required to connect environmental conditions to change in NDD frequency. 相似文献
The compression index (Cc), which is used to calculate the consolidation settlement of fine-grained soils, can be determined through consolidation testing. Given that exploring the soil in a local region is highly important to determine the correlation between the Cc and other soil indices, the present study investigated these correlations in undisturbed and disturbed samples through 130 consolidation tests and determining the Cc of Tehran clay. The results are suggestive of the validity of the linear correlation between the Cc and the unit weight and initial void ratio of the soil, with several relations presented to estimate the Cc of Tehran clay soil. In contrast, the initial water content, liquid limit and the plasticity index do not produce reliable correlations with the Cc of the local clay soil, and a relation based on these index parameters cannot be recommended in this area. Further, the presented empirical correlations were compared with the existing ones. More over time-displacement and e-log σ’ graphs for undisturbed and disturbed samples are compared and stress history of the site are presented. The results are significant in terms of engineering applications, saving time and money and provides an initial estimation of compression index.
Design of reinforced soil structures is greatly influenced by soil–geosynthetic interactions at interface which is normally assessed by costly and time consuming laboratory tests. In present research, using the results of large-scale direct shear tests conducted on soil–anchored geogrid samples a model for predicting Enhanced Interaction Coefficient (EIC) is proposed enabling researchers/engineers easily, quickly and at no cost to estimate soil–geosynthetic interactions. In this regard well and poorly graded sands, anchors of three different size and anchorage lengths from the shear surface together with normal pressures of 12.5, 25 and 50 kPa were used. Artificial Intelligence (AI) called the Gene Expression Programming (GEP) was adopted to develop the model. Input variables included coefficients of curvature and uniformity, normal pressure, effective grain size, anchor base and surface area, anchorage length and the output variable was EIC. Contributions of input variables were evaluated using sensitivity analysis. Excellent correlation between the GEP-based model and the experimental results were achieved showing that the proposed model is well capable of effectively estimating soil–anchored geogrid enhanced interaction coefficient. Sensitivity analysis for parameter importance shows that the most influential variables are normal pressure (σn) and anchorage length (L) and the least effective parameters are average particle size (D50) and anchor base area (Ab).
Natural Resources Research - Machine learning (ML) schemes can enhance success in geochemical prospectivity mapping. This study has examined the effectiveness of several feature extraction or... 相似文献
Natural Resources Research - Carbon capture and storage is part of Canada’s climate change action plan to reduce greenhouse gas emissions. The Containment and Monitoring Institute Field... 相似文献
In radio astronomy, the Ultra-Long Wavelengths (ULW) regime of longer than 10 m (frequencies below 30 MHz), remains the last virtually unexplored window of the celestial electromagnetic spectrum. The strength of the science case for extending radio astronomy into the ULW window is growing. However, the opaqueness of the Earth’s ionosphere makes ULW observations by ground-based facilities practically impossible. Furthermore, the ULW spectrum is full of anthropogenic radio frequency interference (RFI). The only radical solution for both problems is in placing an ULW astronomy facility in space. We present a concept of a key element of a space-borne ULW array facility, an antenna that addresses radio astronomical specifications. A tripole–type antenna and amplifier are analysed as a solution for ULW implementation. A receiver system with a low power dissipation is discussed as well. The active antenna is optimized to operate at the noise level defined by the celestial emission in the frequency band 1 ? 30 MHz. Field experiments with a prototype tripole antenna enabled estimates of the system noise temperature. They indicated that the proposed concept meets the requirements of a space-borne ULW array facility. 相似文献
The ability of fuzzy logic algorithms to model relationships between stream flow and suspended sediment discharge was investigated
using daily measurements of stream flow and suspended sediment discharge for the Escanaba River mouth station, situated on
the shore of Lake Michigan and operated by the US Geological Survey. Three different configurations of inputs were applied,
whereby the inputs were fuzzified into fuzzy subsets of variables by means of triangular membership functions. The relationships
between inputs and suspended sediment discharge (output) were represented by a set of fuzzy rule expressed in IF–THEN format.
The weighted average method served for defuzzification. The commonly used sediment rating curve was also applied to the data,
and its performance compared with that of the three models by means of statistical analyses. For all three models, suspended
sediment discharge predicted by the fuzzy logic algorithm was in satisfactory agreement with observations. Furthermore, the
fuzzy logic algorithms performed better than the sediment rating curve, particularly at higher rates of suspended sediment
discharge (in this study, more than 50 × 106 g/day). Considered collectively, the use of fuzzy logic algorithms is suggested as a simple and effective approach for better
prediction of suspended sediment discharge, also for estuaries. 相似文献
This paper discusses the numerical prediction of the induced pressure and lift of the planing surfaces in a steady motion based on the potential flow solver as well as the spray drag by use of the practical method.The numerical method for computation of the induced pressure and lift is potential-based boundary element method.Special technique is identified to present upwash geometry and to determine the spray drag.Numerical results of a planing flat plate and planing craft model 4666 are presented.It is shown that the method is robust and efficient and the results agree well with the experimental measurements with various Froude humors. 相似文献
