Geochemical and radioactivity mapping in Poland     

Józef Lis  Anna Pasieczna  Ryszard Strzelecki  Stanis?aw Wo?kowicz  Pawe? Lewandowski 《Journal of Geochemical Exploration》1997,60(1):39-53

In 1990 the Polish Geological Institute initiated geochemical mapping of the country aimed at determining the actual conditions of chemistry in the Earth's surficial environments (soils, water sediments, and surficial waters as well) and sea-floor deposits in the Polish economic sector of the Baltic Sea. The geochemical mapping on different scales covered the entire area of the country and selected more important urban agglomerations and industrial districts. Approximately 15,100 samples of soils, 16,200 samples of fresh water sediments, 14,600 samples of surface waters and 467 samples of marine deposits were collected and analysed. A list of geochemical atlases published by the Polish Geological Institute is presented. Investigation of the distribution of radionuclides (natural and artificial) has been done since 1992. Concentrations of U, Th, K, post-Chernobyl Cs and γ dose rate were measured. Approximately 20,000 points covering the whole country were measured. More detailed mappings were executed in the areas polluted by Cs.  相似文献   

The use of selected research methods to describe the pore space of dolomite from copper ore mine,Poland     

Anna Pajdak  Katarzyna Godyń  Mateusz Kudasik  Tomasz Murzyn 《Environmental Earth Sciences》2017,76(11):389

Basic knowledge of the characteristics of copper-bearing rock such as dolomite is essential to locate those areas of the deposit which have different structural and textural properties. Those regions can be important in terms of the assessment of the possibilities of gas accumulating in them as well as in terms of gasogeodynamic hazard. To better understand those threats, it is necessary to locate, monitor and analyse those areas in detail. This article characterises the structural and textural parameters of dolomite from the Polkowice–Sieroszowice copper mine in Poland. The study involved five samples from various areas of the mine. A number of research methods were selected. Reflected and transmitted light microscopy (MS), computer microtomography (Micro-CT), gas adsorption porosimetry (LPNA), mercury porosimetry (MIP), helium and quasi-fluid pycnometry (Pycno. He, DryFlo). Each of the methods examined a different scope of the pore size, which enabled to achieve a full view of the porous nature of those rocks. We determined their porosity (open, closed, total), surface area as well as mean size and volume of the pores. Also, we studied the character and the pore size distribution from a few nm to a few mm. Comprehensive dolomite properties analyses showed that these rocks are characterised by high structural variability. They have mesopores and macropores but few micropores. The analyses presented in this paper are determined by a large petrographic diversity of the deposits containing dolomite. This article is an example of a comprehensive approach to the rock analysis in copper ore mines.  相似文献   

How Long is an Aftershock Sequence?     

Cataldo Godano  Anna Tramelli 《Pure and Applied Geophysics》2016,173(7):2295-2304

  相似文献   

Prograded foredunes of Western Australia's macro‐tidal coast – implications for Holocene sea‐level change and high‐energy wave impacts          下载免费PDF全文

Max Engel  Simon Matthias May  Anja Scheffers  Peter Squire  Anna Pint  Dieter Kelletat  Helmut Brückner 《地球表面变化过程与地形》2015,40(6):726-740

The Holocene evolution of the Canning Coast of Western Australia has largely been overlooked so far mainly due to its remoteness and low population density. We report on new data from a sequence of foredunes inside the macro‐tidal Admiral Bay, 110 km southwest of Broome. Based on sediment cores, differential global positioning system (dGPS)‐based elevation transects, and stratigraphical analyses on outcrops of the relict foredunes, we aim at reconstructing Holocene coastal changes and relative sea levels (RSLs), as well as identifying and dating imprints of extreme‐wave events. Sedimentary analyses comprise the documentation of bedding structures, foraminiferal content and macrofaunal remains, grain size distribution, and organic matter. The chronological framework is based on 26 carbon‐14 accelerator mass spectrometry (¹⁴C‐AMS) datings. Marine flooding of the pre‐Holocene surface landward of the 2.5 km‐wide foredune barriers occurred 7400–7200 cal bp , when mangroves colonized the area. After only 200–400 years, a high‐energy inter‐tidal environment established and prevailed until c. 4000 cal bp , before turning into the present supralittoral mudflat. During that time, coastal regression led to beach progradation and the formation of aligned foredunes. Drivers of progradation were a stable RSL or gradual RSL fall after the mid‐Holocene and a positive sand budget. The foredunes overlie upper beach deposits located up to >2 m above the present upper beach level and provide evidence for a higher mid‐Holocene RSL. Discontinuous layers of coarse shells and sand are intercalated in the foredunes, indicating massive coastal flooding events. One such layer was traced over three dune ridges and dated to c. 1700–1550 cal bp . However, it seems that most tropical cyclones induce net erosion rather than deposition at aligned foredunes and thus, they are only suitable for reconstructing temporal variability if erosional features or sedimentation reliably tied to these events can be identified and dated accurately. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Enhancing the management response to oil spills in the Tuscany Archipelago through operational modelling     

João Janeiro  Anna ZacharioudakiEhsan Sarhadi  Augusto NevesFlávio Martins 《Marine pollution bulletin》2014

A new approach towards the management of oil pollution accidents in marine sensitive areas is presented in this work. A set of nested models in a downscaling philosophy was implemented, externally forced by existing regional operational products. The 3D hydrodynamics, turbulence and the oil transport/weathering models are all linked in the same system, sharing the same code, exchanging information in real time and improving its ability to correctly reproduce the spill. A wind-generated wave model is also implemented using the same downscaling philosophy. Observations from several sources validated the numerical components of the system. The results obtained highlight the good performance of the system and its ability to be applied for oil spill forecasts in the region. The success of the methodology described in this paper was underline during the Costa Concordia accident, where a high resolution domain was rapidly created and deployed inside the system covering the accident site.  相似文献   

Fragmentation during Rock Falls: Two Italian Case Studies of Hard and Soft Rocks     

Nicola Nocilla  Aldo Evangelista  Anna Scotto di Santolo 《Rock Mechanics and Rock Engineering》2009,42(5):815-833

In recent years, rock fall phenomena in Italy have received considerable attention for risk mitigation through in situ observations and experimental data. This paper reports the study conducted at Camaldoli Hill, in the urban area of Naples, and at Monte Pellegrino, Palermo, Italy. The rocks involved are volcanic Neapolitan yellow tuff (NYT) in the former area and dolomitic limestone in the latter. Both rocks, even though with different strength characteristics, have shown a significant tendency towards rock fragmentation during run out. This behavior was first investigated by comparing the volumes of removable blocks on the cliff faces (V ₀) and fallen blocks on the slopes (V _f). It was assumed that the ratio V _f/V ₀ decreases with the distance (x _f) from the detachment area by an empirical law, which depends on a coefficient α, correlated with the geotechnical properties of the materials involved in the rock fall. Finally, this law was validated by observation of well-documented natural rock falls (Palermo) and by in situ full-scale tests (Naples). From the engineering perspective, consideration of fragmentation processes in rock fall modeling provides a means for designing low-cost mitigation measures.  相似文献   

Molecular analysis of petroleum derived compounds that adsorb onto gas hydrate surfaces     

Anna E. Borgund  Sylvi Høiland  Tanja Barth  Per Fotland  Kjell M. Askvik 《Applied Geochemistry》2009

Field observations have shown that some streams of water, gas and crude oil do not form gas hydrate plugs during petroleum production even when operating within thermodynamic conditions for hydrate formation. Also, when studied under controlled laboratory conditions, some oils are found to form hydrate dispersed systems whereas others form plugs. Oils with low tendency to form hydrate plugs are believed to contain natural hydrate plug inhibiting components (NICs) that adsorb onto the hydrate surface, making them less water-wet and preventing the particles from agglomerating into large hydrate clusters. The molecular structure of the NICs is currently unknown. In this work, hydrate adsorbing components were extracted from crude oils using freon hydrates as an extraction phase. The fractions were found to be enriched in polar material, and more polar material is associated with hydrates generated in biodegraded crude oils than in non-biodegraded oils. Various fractionation schemes and analytical techniques have been applied in the search for molecular characterisation. The average molecular weights were found to be approximately 500 g/mole. GC–MS chromatograms show a large UCM (Unresolved Complex Mixture). Thus, GC–MS has a limited potential for identification of compounds. A commercial biosurfactant was used as a model compound in the search for similar structures in the extracts. The results from analysis of the hydrate adsorbing components suggest that the type and structure are more important for hydrate morphology than the amount of material adsorbed.  相似文献   

Detection of a low‐relief 18th‐century British siege trench using LiDAR vegetation penetration capabilities at Fort Beauséjour–Fort Cumberland National Historic Site,Canada     

Koreen Millard  Charles Burke  Douglas Stiff  Anna Redden 《Geoarchaeology》2009,24(5):576-588

  相似文献   

Studies on some properties of coronal mass ejections based on angular width     

M. Anna Lakshmi  S. Umapathy  O. Prakash  V. Vasanth 《Astrophysics and Space Science》2011,332(2):373-378

The paper investigates the effects of thermal conductivity and non-uniform magnetic field on the gravitational instability of a non-uniformly rotating infinitely extending axisymmetric cylinder in a homogeneous heat conducting medium. The non-uniform rotation and magnetic field are supposed to act along θ and z directions of the cylinder. It is found that the gravitational instability of this general problem is determined by the same criterion as obtained by Dhiman and Dadwal (Astrophys. Space Sci. 325(2):195–200, 2010) for the self-gravitating isothermal medium in the presence of non-uniform rotation and magnetic field with the only difference that adiabatic sound velocity is now replaced by the isothermal sound velocity. It is found that the thermal conductivity has stabilizing effect on the onset of gravitational instability. Further, the stabilizing/destabilizing effect of the non-uniform magnetic field on the gravitational instability of heat conducting medium has been discussed and is illustrated by considering some special forms of the basic magnetic fields.  相似文献   

Mitigation of lunar dust adhesion by surface modification   总被引：2，自引：0，他引：2  

Adrienne Dove  Genevieve Devaud  Xu Wang  Mark Crowder  Anna Lawitzke  Christina Haley 《Planetary and Space Science》2011,59(14):1784-1790

Dust has been recognized as one of the greatest hazards in continued lunar exploration due to its tenacious adhesion to everything with which it comes into contact. Unfortunately, there is little known about the mechanisms of adhesion on widely varying surface types: van der Waals and electrostatic forces are the dominant forces under consideration here. Surface energy, roughness, mechanical properties and electronic properties are all known to contribute to the adhesion characteristics. An optimal solution to mitigate dust adhesion would be to identify the dominant components of the adhesive force and to reduce that force by surface modification. In this study, an ion beam process was used to modify (treat) the surfaces of three dramatically different materials spanning the range of conductor (black Kapton), semiconductor (silicon), and insulator (quartz). Adhesive forces between less than JSC-1 lunar simulants and these virgin/treated surfaces were measured in vacuum using a centrifugal force detachment method. We found that JSC-1 particles adhered less to treated silicon and quartz surfaces, correlated with a reduction in van der Waals force due to a reduced surface energy. The large reduction in adhesion for treated black Kapton is mainly due to the large decrease in the electrostatic (image) force that results from reduced contact charging. Materials in space and on the lunar surface will be directly exposed to high-energy ultraviolet radiation prior to being covered by dust, so the UV irradiation effects on surface adhesion were also examined. Both virgin and treated quartz surfaces are most affected by the UV-irradiation, showing dramatically increased adhesion.  相似文献