Oxfordian magnetostratigraphy of Poland and its correlation to Sub-Mediterranean ammonite zones and marine magnetic anomalies     

P.A. Przybylski  E. Głowniak  J.G. Ogg  P. Ziółkowski  M. Sidorczuk  J. Gutowski  M. Lewandowski 《Earth and Planetary Science Letters》2010,289(3-4):417-432

A nearly continuous magnetostratigraphic polarity pattern was compiled from several ammonite-zoned carbonate successions of southern Poland and from a composite magnetostratigraphy from the Iberian Range of Spain. The array of sections spans the middle two-thirds of the Oxfordian within the Sub-Mediterranean Province (Cordatum through Bifurcatus ammonite zones). The average paleopole calculated from eight of these Polish sections is at 78.5°N, 184.9°E (δp = 2.6°, δm = 3.5°). The Sub-Mediterranean polarity pattern is consistent with an independent polarity pattern derived from the Boreal-realm sections of the British Isles, and improves the inter-correlation between these faunal realms. Cycle stratigraphy published for these ammonite subzones from southern France enabled temporal scaling of the polarity pattern, thereby facilitating correlation to marine magnetic anomalies M28 through M33 as modeled from deep-tow magnetometer surveys in the Western Pacific. The bases of the Middle and Upper Oxfordian substages as defined in the Sub-Mediterranean zonation in Poland correspond approximately to chrons M33 and M29 of that Pacific M-sequence model.  相似文献   

Exploring large wood retention and deposition in contrasting river morphologies linking numerical modelling and field observations          下载免费PDF全文

Virginia Ruiz‐Villanueva  Bartłomiej Wyżga  Hanna Hajdukiewicz  Markus Stoffel 《地球表面变化过程与地形》2016,41(4):446-459

Large wood tends to be deposited in specific geomorphic units within rivers. Nevertheless, predicting the spatial distribution of wood deposits once wood enters a river is still difficult because of the inherent complexity of its dynamics. In addition, the lack of long‐term observations or monitored sites has usually resulted in a rather incomplete understanding of the main factors controlling wood deposition under natural conditions. In this study, the deposition of large wood was investigated in the Czarny Dunajec River, Polish Carpathians, by linking numerical modelling and field observations so as to identify the main factors influencing wood retention in rivers. Results show that wood retention capacity is higher in unmanaged multi‐thread channels than in channelized, single‐thread reaches. We also identify preferential sites for wood deposition based on the probability of deposition under different flood scenarios, and observe different deposition patterns depending on the geomorphic configuration of the study reach. In addition, results indicate that wood is not always deposited in the geomorphic units with the highest roughness, except for low‐magnitude floods. We conclude that wood deposition is controlled by flood magnitude and the elevation of flooded surfaces in relation to the low‐flow water surface. In that sense, the elevation at which wood is deposited in rivers will differ between floods of different magnitude. Therefore, together with the morphology, flood magnitude represents the most significant control on wood deposition in mountain rivers wider than the height of riparian trees. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Root properties of vegetation communities and their impact on the erosion resistance of river dikes   总被引：1，自引：0，他引：1       下载免费PDF全文

Wouter Vannoppen  Jean Poesen  Patrik Peeters  Sarah De Baets  Bart Vandevoorde 《地球表面变化过程与地形》2016,41(14):2038-2046

Predicted climate change and the associated sea level rise poses an increased threat of flooding due to wave overtopping events at sea and river dikes. To safeguard the land from flooding it is important to keep the soil erosion resistance at the dikes high. As plant roots can be very effective in reducing soil erosion rates by concentrated flow, the main goal of this study is to explore the variability in root system characteristics of five dike vegetation communities along the Scheldt River (Belgium) and to assess their effectiveness in controlling soil erosion rates during concentrated flow. This study is the first one to investigate systematically the erosion‐reducing potential of the root properties of representative dike vegetation communities in a temperate humid climate. Results show that the presence of Urtica dioica resulted in large differences in root length density (RLD) among dike vegetation communities. Observed RLD values in the topsoil ranged from 129 to 235 km m^‐3 for dike vegetation communities without U. dioica, while smaller values ranging from 22 to 58 km m^?3 were found for vegetation communities with U. dioica. The erosion‐reducing effect of the dike vegetation communities was estimated based on a global Hill curve model, linking the RLD to the soil detachment ratio (SDR; i.e. the ratio of the soil detachment rate for root‐permeated topsoils to the soil detachment rate for root‐free topsoils). Concentrated flow erosion rates are likely to be reduced to 13–16% of the erosion rates for root‐free topsoils if U. dioica is absent compared to 22–30% for vegetation communities with U. dioica. Hence, to maintain a high resistance of the soil against concentrated flow erosion it is important to avoid the overgrowth of grassland by U. dioica through an effective vegetation management. Copyright © 2016 John Wiley & Sons, Ltd.  相似文献   

The Influence of a Local Fault Zone on High Energy Tremor Occurrence During Longwall Mining of a Coal Seam     

Łukasz Wojtecki  Małgorzata Knopik  Wacław Marian Zuberek 《Acta Geophysica》2016,64(4):1164-1175

Underground mining of coal seams in the Upper Silesian Coal Basin in Poland is accompanied by seismic activity of varying magnitude. The investigations which have been performed for several years distinguished high energy mine tremors connected directly with mining or coupled with geological structures, such as large faults. In mined seams, local fault zones occur. Faults in these zones are usually small, with throws comparable with coal seams thicknesses. Local fault zone may be responsible for the occurrence of high energy tremors as well as large faults, as presented in this article. An analysis of source mechanism of high energy tremors generated during longwall mining of the coal seam No. 510, with presence of a local fault zone, in one of the Polish hard coal mines in the Upper Silesian Coal Basin was performed. For this purpose, the seismic moment tensor inversion method was used. In most of foci, the process of shear predominated. Determined nodal plane parameters were correlated with parameters of faults forming the local fault zone. High energy tremors were generated mostly by dislocations on faults of the local fault zone. Weakening of roof rocks in the neighborhood of local fault zone takes an important role too, and was responsible for share of implosion in the focal mechanism.  相似文献   

Pareto Joint Inversion of 2D Magnetotelluric and Gravity Data — Towards Practical Applications     

Katarzyna Miernik  Adrian Bogacz  Adam Kozubal  Tomasz Danek  Marek Wojdyła 《Acta Geophysica》2016,64(5):1655-1672

In this paper, a Pareto inversion based global optimization approach, to obtain results of joint inversion of two types of geophysical data sets, is formulated. 2D magnetotelluric and gravity data were used for tests, but presented solution is flexible enough to be used for combination of any kind of two or more target functions, as long as misfits can be calculated and forward problems solved. To minimize dimensionality of the solution, space and introduce straightforward regularization Sharp Boundary Interface (SBI) method was applied. As a main optimization engine, Particle Swarm Optimization (PSO) was used. Synthetic examples based on a real geological model were used to test proposed approach and show its usefulness in practical applications.  相似文献   

Prospects for Scrutiny of Pulsars with Polish Part of LOFAR     

Leszek Błaszkiewicz  Wojciech Lewandowski  Andrzej Krankowski  Jarosław Kijak  Olga Koralewska  Bartosz P. Dąbrowski 《Acta Geophysica》2016,64(1):293-315

LOFAR (LOw Frequency ARray) is a new generation digitally controlled radio telescope consisting of phased array antenna stations with sensitivity, bandwidth, range of frequency, and digital processing power that makes it an excellent tool for observations of pulsars. This interferometric instrument is able to work in a single-station mode as well as in group-of-selected-stations mode. This article discusses the great opportunity for conducting unique and independent research of pulsar sources with the three LOFAR stations located in Poland and maintained by the POLFAR consortium.  相似文献   

Natural Radioactivity at the Sin Quyen Iron-Oxide-Copper-Gold Deposit in North Vietnam     

Dinh Chau Nguyen  Phon Le Khanh  Paweł Jodłowski  Jadwiga Pieczonka  Adam Piestrzyński  Hao Duong Van  Jakub Nowak 《Acta Geophysica》2016,64(6):2305-2321

The field radiometric and laboratory measurements were performed at the Sin Quyen copper deposit in North Vietnam. The field gamma-ray spectrometry indicated the concentration of uranium ranging from 5.5 to 87 ppm, thorium from 5.6 to 33.2 ppm, and potassium from 0.3 to 4.7%. The measured dose rates ranged from 115 to 582 nGy/h, the highest doses being at the copper ore. Concentrations in the solid samples were in the range of 20–1700 Bq/kg for uranium, 20–92.7 Bq/kg for thorium, and 7–1345 Bq/kg for potassium. The calculated doses were from 22 to 896 nGy/h; both measured and calculated dose rates are mostly related to uranium. Concentrations of radium in water samples were below 0.17 Bq/L. Uranium in water samples was significantly higher than the hydrogeological background; the maximum of 13 Bq/L was at the waste zone pool, but neither radium nor uranium were present in tap water. Radon concentration in the dwelling air was from 42 to 278 Bq/m³ for ²²²Rn and from 8 to 193 Bq/m³ for ²²⁰Rn. The estimated committed dose rates were principally related to ²²²Rn concentration and ranged from 1.1 to 8.1 mSv/y.  相似文献   

A Variscan continental collision of the West Sudetes and the Brunovistulian terrane: a contribution from structural and metamorphic record of the Stronie Formation,the Orlica-Śnieżnik Dome,SW Poland     

Mirosław Jastrzębski 《International Journal of Earth Sciences》2009,98(8):1901-1923

Structural, petrological and geochronological data from marbles and mica schists combined with those from highly disputable gneisses and eclogites of the Orlica-Śnieżnik Dome (OSD), gave new insights into Variscan evolution of eastern borderland of the West Sudetes. It is shown that the Variscan tectonometamorphic evolution of the OSD began with E–W oriented subhorizontal shortening (D1 stage) related to the collision of the West Sudetes terranes and the Brunovistulian terrane. The shortening led to generally upright folding, which resulted in formation of the steep N–S trending metamorphic planar fabric S1, thickening of the lithosphere and burial of the Stronie Formation under greenschist facies conditions. As a consequence of subsequent, near-coaxial gravity-controlled vertical shortening (D2), the S1 foliation was deformed in tight recumbent folds F2. The flattening strain was associated with the progression to amphibolite-facies conditions (from ca. 510 upto ca. 620°C) and uplift from depths corresponding to 9–10 kbar to depths corresponding to 7–8 kbar. On microscale, the flattening strain is documented by rotation of the mineral fabric overgrown by syn-D2 prograde garnet porphyroblasts. The Sm–Nd Grt–WR isochron age, correlated with the D2 event yields 346.5 ± 4.4 Ma. Further deformation and progressive metamorphism led to development of the subhorizontally disposed S2 axial plane schistosity, which terminated at the metamorphic temperature peak. During retrogression but still under ductile conditions of deformation, the S2 planes were reactivated during successive top-to-the-N shear movement of the OSD (D3 stage). Due to the mutual interaction of the OSD with the adjacent terranes the shear deformations were localized within marginal parts of these units. Finally, as a result of the NE–SW and the NW–SE oriented shortenings (D4 stage and D5 stage, respectively), both the structural surfaces and metamorphic isograds were regionally folded with W(NW)-ward plunges. A synthesis of new and existing data shows an overall similarity in sequence of Variscan deformations (D1–D2–D3) in the West Sudetes borderland to that observed in the eastern flank of the Moldanubian domain.  相似文献   

Modeling uncertainty of moving objects on road networks via space–time prisms     

Bart Kuijpers 《International journal of geographical information science》2013,27(9):1095-1117

Moving objects produce trajectories, which are typically observed in a finite sample of time‐stamped locations. Between sample points, we are uncertain about the moving objects's location. When we assume extra information about an object, for instance, a (possibly location‐dependent) speed limit, we can use space–time prisms to model the uncertainty of an object's location.

Until now, space–time prisms have been studied for unconstrained movement in the 2D plane. In this paper, we study space–time prisms for objects that are constrained to travel on a road network. Movement on a road network can be viewed as essentially one‐dimensional. We describe the geometry of a space–time prism on a road network and give an algorithm to compute and visualize space–time prisms. For experiments and illustration, we have implemented this algorithm in MATHEMATICA.

Furthermore, we study the alibi query, which asks whether two moving objects could have possibly met or not. This comes down to deciding if the chains of space–time prisms produced by these moving objects intersect. We give an efficient algorithm to answer the alibi query for moving objects on a road network. This algorithm also determines where and when two moving objects may have met.  相似文献   

Pesticides Removal by Filtration over Cactus Pear Leaves: A Cheap and Natural Method for Small‐Scale Water Purification in Semi‐Arid Regions     

Abraha Gebrekidan  Hannah Nicolai  Liese Vincken  Mekone Teferi  Tsehaye Asmelash  Tadesse Dejenie  Samuel Zerabruk  Kindeya Gebrehiwet  Hans Bauer  Josef Deckers  Patricia Luis  Luc De Meester  Bart van der Bruggen 《洁净——土壤、空气、水》2013,41(3):235-243

This study aims to examine the efficiency of Opuntia ficus‐indica for removing organochlorine pesticides from surface waters. Adsorption properties such as size, dose, and time of O. ficus‐indica for aldrin, dieldrin, and dichlorodiphenyltrichloroethane (DDT) were studied through stirring and column methods. Because of their high affinity and swelling characteristics, dried O. ficus‐indica was studied in stirring while fresh unpeeled O. ficus‐indica was applied in both stirring and column experiments and proved to be well‐suited to column application. Before removing pesticides, the column was flashed with distilled water eliminate the turbidity and smell from fresh unpeeled cactus. The removal of pesticides increased with an increasing adsorbent dose and decreased with adsorbent particle sizes. The optimum adsorbent dose is 10 g for dried and 15 g for fresh unpeeled O. ficus‐indica. The experimental results show that O. ficus‐indica possesses strong adsorption ability for aldrin, dieldrin, and DDT, and the adsorption isotherm data obeyed the Freundlich model. The results of our small‐scale experiments suggest a strong potential to develop local small‐scale water treatment units that can be used at the level of individual households or local communities, using a widely available adsorbent.  相似文献