A pod-based dual-beam SAR     

Farquharson  G. Junek  W.N. Ramanathan  A. Frasier  S.J. Tessier  R. McLaughlin  D.J. Sletten  M.A. Toporkov  J.V. 《Geoscience and Remote Sensing Letters, IEEE》2004,1(2):62-65

A dual-beam along-track interferometric synthetic aperture radar that is entirely self-contained within an aircraft pod has been developed by the University of Massachusetts to study sea surface processes in coastal regions. The radar operates at 5.3 GHz with a bandwidth of up to 25 MHz. System hardware is described. Initial test flights aboard the National Oceanic and Atmospheric Administration's WP-3D research aircraft were performed to evaluate system performance over land and water surfaces. Imagery were collected for fore and aft squinted beams, though no interferometric data were collected. Notable look-angle dependences are observed in the sea surface normalized radar cross section under very low wind conditions.  相似文献   

Trace metals in oxic lake sediments: possible adsorption onto iron oxyhydroxides     

A. Tessier  F. Rapin  R. Carignan 《Geochimica et cosmochimica acta》1985,49(1):183-194

Apparent overall equilibrium constants for the adsorption of Cd, Cu, Ni, Pb and Zn onto natural iron oxyhydroxides have been calculated from the partitioning of these trace metals in oxic lake sediments and the in situ measurement of trace metal concentrations in the associated pore waters. Such values obtained from lakes of various pH located on the Precambrian Shield, in the area of Sudbury, Ontario, are compared with equilibrium constants obtained for the adsorption of the trace metals onto iron oxyhydroxides in well-defined media.The field data are consistent with laboratory experiments reported in the literature and with theory. Both the influence of pH upon adsorption and the binding strength sequence observed for the field data agree with theory. At high sediment pH values, the partitioning of Cd, Ni and Zn between the pore waters and the natural iron oxyhydroxides is similar to those reported in the literature for the adsorption of these metals at low surface coverage onto amorphous iron oxyhydroxides in a NaNO₃ medium; deviation from this simple model is however observed for Cu and Pb, presumably due to the competitive action of dissolved ligands. At low sediment pH values, the adsorption is much higher than predicted by the simple model and can be explained by the formation of ternary complexes with the iron oxyhydroxide surface.  相似文献   

Spatial evolution of nitrogen and phosphorus loads along a small Mediterranean river: implication of bed sediments     

Marie‐George Tournoud  Jean‐Louis Perrin  Frdric Gimbert  Bernadette Picot 《水文研究》2005,19(18):3581-3592

This study addresses the spatial variations in water quality along the River Vène (France). The Vène drains a 67 km² rural basin, with a large karstic area, located in a Mediterranean context. A 1 day sampling campaign was conducted along the river, in winter low‐flow conditions (February 2003). Physico‐chemical parameters and water flow discharge were measured in situ during the sampling campaign. Water quality was evaluated by determining the concentrations of nitrogen and phosphorus in water and bed‐sediment samples. Nitrogen and phosphorus loads were evaluated taking into account the measured concentrations and discharge. The campaign included 18 sampling points and concerned the whole river from the spring to the outlet, plus the main inputs, i.e. sewage treatment works, main tributaries and karstic springs. The spatial evolution of nitrogen and phosphorus loads along the river allowed the significant role of point‐source inputs to be demonstrated. The decrease in nutrient loads along the river occurred mainly in specific reaches where fine sediments had accumulated. In these zones, phosphorus is trapped in the bed sediments in calcium‐bound phosphates due to precipitation processes. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

Intra‐event scale bar–bank interactions and their role in channel widening          下载免费PDF全文

Mario Klösch  Bernadette Blamauer  Helmut Habersack 《地球表面变化过程与地形》2015,40(11):1506-1523

Channel bars and banks strongly affect the morphology of both braided and meandering rivers. Accordingly, bar formation and bank erosion processes have been greatly explored. There is, however, a lack of investigations addressing the interactions between bed and bank morphodynamics, especially over short timescales. One major implication of this gap is that the processes leading to the repeated accretion of mid‐channel bars and associated widenings remain unsolved. In a restored section of the Drau River, a gravel‐bed river in Austria, mid‐channel bars have developed in a widening channel. During mean flow conditions, the bars divert the flow towards the banks. One channel section exhibited both an actively retreating bank and an expanding mid‐channel bar, and was selected to investigate the morphodynamic processes involved in bar accretion and channel widening at the intra‐event timescale. We repeatedly surveyed riverbed and riverbank topography, monitored riverbank hydrology and mounted a time‐lapse camera for continuous observation of riverbank erosion processes during four flow events. The mid‐channel bar was shown to accrete when it was submerged during flood events, which at the subsequent flow diversion during lower discharges narrowed the branch along the bank and increased the water surface elevation upstream from the riffle, which constituted the inlet into the branch. These changes of bed topography accelerated the flow along the bank and triggered bank failures up to 20 days after the flood events. Four analysed flow events exhibited a total bar expansion from initially 126 m² to 295 m², while bank retreat was 6 m at the apex of the branch. The results revealed the forcing role of bar accretion in channel widening and highlighted the importance of intra‐event scale bed morphodynamics for bank erosion, which were summarized in a conceptual model of the observed bar–bank interactions. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Migration and internal architecture of marine dunes in the eastern English Channel over 14 and 56 year intervals: the influence of tides and decennial storms     

Y. Ferret  S. Le Bot  B. Tessier  T. Garlan  R. Lafite 《地球表面变化过程与地形》2010,35(12):1480-1493

Submarine dune dynamics are controlled by tidal currents and wind forces. According to the relative influence of these forces and the nature of dune sediment, different bedform behaviors can be observed. The footprint of the different hydrodynamic agents is recorded into the internal architecture of dunes. This paper is concerned with bedforms that compose the thick sediment wedge located in the eastern English Channel, off the Bay of Somme. This sedimentary archive constitutes an interesting feature to achieve a better understanding of seabed sediment dynamics and its timeline building stages. The dynamics of large submarine dunes, which are organized in fields, are studied thanks to bathymetric and seismic data over the periods 1937–1993 and 1993–2007. Dune morphology presents low lee and stoss side slopes (on average 8° and 3°, respectively) and dune migration rate is not very high. Dune movements are in the direction of residual tidal currents, i.e. toward the east, with mean migration rates around 0·8 to 5 ± 0·25 m yr^?1 and up to 6·6 ± 0·7 m yr^?1, respectively, at multi‐decennial and decennial time scales. The dune internal architecture is complex with superimposed eastward prograding units, displaying locally opposite progradation. Second‐order discontinuities (dip of 0·5°–4° perpendicular to dune crests) constitute dune master bedding. By counting the number of second‐order reflectors between 1937–1993 and 1993–2007, the formation periodicity of these bounding surfaces is estimated to range from 4 to 18 years. These time intervals coincide with the long‐term tidal cyclicities and also with the inter‐annual to decennial variability of storm activity in northern Europe. Two theories were made to interpret the dune internal structures: the second‐order surfaces are interpreted either as the depositional surfaces corresponding to the marks of weak energy periods (weak tidal and storm action), or as erosive surfaces due to an opposite direction of dune migration provoked temporarily by exceptional storms from the northeast. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Particulate trace metal speciation in stream sediments and relationships with grain size: Implications for geochemical exploration   总被引：1，自引：0，他引：1  

A. Tessier  P. G. C. Campbell  M. Bisson 《Journal of Geochemical Exploration》1982,16(2):77-104

Sediment samples were collected from streambeds in an undisturbed watershed in eastern Quebec (Gaspé Peninsula). Two sampling sites were located on a stream draining an area of known mineralization (Cu, Pb, Zn) and two on a control stream. The sediment samples were separated into 8 distinct size classes in the 850 μm to <1 μm size range by wet sieving, gravity sedimentation or centrifugation. Each sediment subsample was then subjected to a sequential extraction procedure designed to partition the particulate heavy metals into five fractions: (1) exchangeable; (2) specifically adsorbed or bound to carbonates; (3) bound to Fe-Mn oxides; (4) bound to organic matter; (5) residual. The following metals were analyzed in each extract: Cu, Pb, Zn; Fe, Mn.Comparison of samples from the mineralized area with control samples revealed the expected increase in total concentrations for Cu, Pb and Zn. Non-detrital metals were mainly associated with Fe oxides (specifically adsorbed; occluded) and with organic matter or resistant sulfides. For a given sample, variation of trace metal levels in fractions 2 and 3 with grain size reflected changes in the available quantities of the inorganic scavenging phase (FeOx/MnOx); normalization with respect to Fe and Mn content in fraction 3 greatly reduced the apparent dependency on grain size.The results of this study suggest that a single reducing extraction (NH₂OH.HCl) could be used advantageously to detect anomalies in routine geochemical surveys. A second leaching step with acidified H₂O₂ could also be included, as the trace metal concentrations in fraction 4, normalized with respect to organic carbon content, also showed high {anomaly/background} ratios.  相似文献   

Evaluation of the bearing capacity of near-surface soils using integrated methods: A case study of Otukpa,Ogbadibo Lga,Benue state,North-Central Nigeria     

Peter Ameh  Ogbonnaya Igwe  Bernadette Ukah 《Journal of the Geological Society of India》2017,90(1):93-101

The load bearing capacity of soils in Otukpa area of Benue state, Nigeria was evaluated by characterizing the geotechnical, geophysical and structural properties of the soil. The evaluation was necessary because aside the area holding good prospect for future increase in human population, sparsely distributed low-weight buildings in the area have cracks and other signs of failure. Remote sensing/GIS, geophysical and geotechnical approaches were integrated to achieve the objective. 2-D tomography and processed remotely sensed data confirmed the presence of areas of strength especially to the north. Stratigraphy of the northern portion consist of four layers; loose top soil (0-0.26m), compact clayey sand (0.26m-3.33m), dry clayey sand (3.33m-74.21m) and saturated clayey sands (74.21m-201.58m) While the stratigraphy in the south is slightly different; compact topsoil (0-1.2m), loose sand (1.2m-10.81m), compact sand (10.82m-19.71m) and compact clay sand (19.71m-56.03m). The plastic limit range from 11-17% with average specific gravity of 2.64g/cm³. Permeability ranges from 7.8×10^-6m/sec to 3.36×10^-4m/sec while volume compressibility under 250kN ranges from 7.27×10^-5m²/kN to 1.3×10^-4m²/kN and the rate of consolidation under 250kN is within 12.43 m²/year to 1.33m²/year. MDD peaks at 1.85g/cm³ at an OMC of 12.11% and is lowest at 1.67g/cm³ at an OMC of 11.99%. UCS ranges from 31-45kN/m² while shear strength is between 258.81kN/m² to 338 kN/m². Due to the variability of engineering properties of soils, the southern part of the area is preferred for locating the buildings. Generally, careful foundation design in the area is necessary.  相似文献   

Depositional controls on a hypertidal barrier-spit system architecture and evolution,Pointe du Banc spit,north-western France     

Mikkel Fruergaard  Bernadette Tessier  Clément Poirier  Dominique Mouazé  Pierre Weill  Suzanne Noël 《Sedimentology》2020,67(1):502-533

Physical stratigraphy, architecture and evolution of barrier systems in hypertidal environments (tidal range above 6 m) are understudied, and depositional controls are poorly understood compared with wave-dominated barrier systems and barrier spits in microtidal, mesotidal and macrotidal settings. Based on vibracores, ground-penetrating radar, radiocarbon and optically stimulated luminescence age data, the formation and evolution of the hypertidal barrier system of Pointe du Banc, north-western France has been reconstructed. The study shows that the barrier spit has a complex composite sedimentary architecture consisting of wave-dominated and tide-dominated sedimentary bodies. A morpho-sedimentary model is presented that demonstrates how barrier-spit progradation resulting from littoral drift was the main manner of spit elongation, whereas sediment convergence caused by landward migration of swash bars and seaward migration of tidal dunes caused the spit terminus to grow in height and width. These results suggest that long-term accretion rates varied considerably in response to changes in sediment supply. Variations in storminess together with the large-scale topography of the coast controlled the sediment supply and thus the evolution of the barrier system during latest Holocene. Despite architectural complexity, hypertidal barrier systems preserve records of past climate changes.  相似文献