Multiforced statistical assessments of greenhouse-gas-induced surface air temperature change 1890–1985     

Christian-D Schönwiese  Ursula Stähler 《Climate Dynamics》1991,6(1):23-33

Based on univariate correlation and coherence analyses and considering the physical basis of the relationships, a simple multiforced (multiple) statistical concept is used which correlates observational climatic time series simultaneously with volcanic, solar, ENSO, and the anthropogenic greenhouse gases forcing. This is appropriate to remove some natural climate noise in the observed data and to evaluate the components (signals) possibly due to the anthropogenic greenhouse gas forcing (CO₂, or equivalent CO₂ implying additional gases) during industrial time. In this paper, we apply this technique to 100 global box data time series 1890–1985, of the surface air temperature, using observed data from Hansen and Lebedeff. The results are presented in terms of latitudinal-seasonal and regional trends, where the observed trend patterns are compared with the hypothetical signals (statistical assessments) possibly due to anthropogenic greenhouse forcing. These latter signals can be amplified to enable a comparison with corresponding results from general circulation model (GCM) CO₂ doubling experiments. These observed-statistical assessments lead to results which are, at least qualitatively and in respect to the zonal mean temperatures, very similar to some GCM experiments indicating the maximum CO₂ doubling signals (statistical assessment > 12 K) in the arctic winter. However, these signals are moderate in the tropics and in the Southern Hemisphere (global average 2.8–4.4 K). As far as the industrial signals are concerned (observed period) these signals are somewhat larger (maximum 7 K, global average 0.5–0.9 K) than the observed trends (maximum 5 K, global average 0.5 K). Phase shifts of cause and effect may amplify these signals but are very uncertain.This paper was presented at the International Conference on Modelling of Global Climate Change and Variability, held in Hamburg 11–15 September 1989 under the auspices of the Meteorological Institute of the University of Hamburg and the Max Planck Institute for Meteorology. Guest Editor for these papers is Dr. L. Dümenil  相似文献   

Transfer factors of contamination between the German Bight and its tributary waters derived from measured tritium and Cs-137 activity concentrations     

Christoph Wedekind  Günter Främcke 《Ocean Dynamics》1991,44(2):59-75

Summary Evaluation of the results of radioactivity monitoring in the southern North Sea between 1977 and 1987 has shown that in the water of the German Bight three areas stand out due to their different ratios between salinity and concentration of dissolved Cs-137 and tritium. While salinity steadily increases with greater distance from the coast, the Cs-137 concentration above 34 PSU (Practical Salinity Unit) increases sharply and shows how far water from the western and central North Sea, contaminated by nuclear reprocessing in Sellafield (Irish Sea), reaches into the German Bight. In the 34 to 32.5 PSU range, the influence can be seen of water contaminated by tritium originating in the rivers Rhein, Maas and Schelde, precipitation and the nuclear reprocessing plant at La Hague (Channel). Below 32.5 PSU, the influence of the influx from the rivers Elbe, Weser and Ems becomes apparent. These rivers are less contaminated with tritium.Assuming that Cs-137 and tritium, like the salinity of sea water, behave conservatively and that the decay-time of these two isotopes is long compared with the time-scale of water exchange in the southern North Sea, the concentration values measured are used to calculate the structure of the water masses in the three areas of the German Bight mentioned above using the mixing principle. Evaporation is taken into account. Results show that beyond 34 PSU, about half the sea water originates in the western central North Sea while the other half comes from the Channel. Below 34 PSU, the first mentioned share amounts only to a few per cent. Results also show that fresh water from the Rhein delta and precipitation, increasing with a decrease in salinity from 34 to 32.5 PSU, accounts for a maximum of 5% each. The fresh water influx into the German Bight via the rivers Elbe, Weser and Ems amounts to app. 11% when the PSU value reaches 29. The calculated portions are the mean values for the observation period. The number of measurements available makes it impossible to distinguish more exactly between the temporal and spatial variability of the amounts of the individual components.The quantity of each calculated portion of sea water also represents the transfer factor of concentration between the nuclide concentration in the source (e. g. the Rhein) and the concentration in the German Bight. In addition, these factors are used to calculate the transfer factors of discharge using the annual drainage rates of the sources. Thus a radioactive discharge rate of 10¹⁵ Bq per year into the Rhein would produce a mean activity concentration of 0.34 Bq/l in the German Bight (at a salinity of 33.5 PSU). To verify the calculated transfer factors, tritium concentrations in the German Bight are derived from existing environmental tritium data and the results are compared with the values actually measured.

---

Transferkaktoren zwischen der Deutschen Bucht und ihren Zuflüssen abgeleitet aus der Tritium- und Cs-137-Aktivitätskonzentration in den beteiligten Gewässern

Zusammenfassung Eine zusammenhängende Auswertung der Meßergebnisse der Radioaktivitätsüberwachung in der südlichen Nordsee über den Zeitraum 1977 bis 1987 hat gezeigt, daß im Wasser der Deutschen Bucht deutlich drei durch den Salzgehalt des Meerwassers und die Konzentration der gelösten Radionuklide charakterisierte Bereiche zu unterscheiden sind.Während der Salzgehalt mit wachsender Entfernung von der Küste stetig zunimmt, steigt die Cs-137-Konzentration oberhalb 34 PSU (Practical Salinity Unit) sprunghaft an und signalisiert die Grenze, bis zu der das durch die Kernbrennstoff-Wiederaufarbeitung in Sellafield (Irische See) kontaminierte Meerwasser der westlichen und mittleren Nordsee in die Deutsche Bucht vordringt. Im Bereich 34 bis 32,5 PSU ist das von Westen zugeführte, stärker Tritium-kontaminierte Wasser aus Rhein, Maas, Schelde und atmosphärischem Niederschlag zu erkennen, an das sich unterhalb 32,5 PSU der geringer mit Tritum kontaminierte Zufluß aus Elbe, Weser und Ems anschließt.Davon ausgehend, daß sich Cs-137 und Tritium wie der Salzgehalt im Meerwasser konservativ verhalten und daß weiterhin die Halbwertzeit des radioaktiven Zerfalls dieser beiden Nuklide lang ist gegenüber den Wasseraustauschzeiten im betrachteten Meeresgebiet, wurden die in der südlichen Nordsee gemessenen sowie aus der Literatur für den Süßwasserbereich entnommenen Konzentrationswerte dazu genutzt, um rechnerisch mit Hilfe des Mischungsgesetzes den Wassermassenaufbau in den drei genannten Salinitätsbereichen in der Deutschen Bucht quantitativ zu bestimmen. Es zeigte sich, daß oberhalb von 34 PSU das Meerwasser aus etwa gleichen Teilen aus der westlichen/mittleren Nordsee und dem Kanal stammt, während unterhalb dieser Salzgehaltsgrenze nur noch mit wenigen Prozentanteilen Wasser aus der mittleren Nordsee zu finden ist. Ferner ergab sich, daß das aus dem Rheinmündungsbiet bzw, aus dem atmosphärischen Niederschlag stammende Süßwasser — mit sinkendem Salzgehalt steigend — bei 32,5 PSU einen maximalen Anteil von jeweils 5% an Meerwasser hat. Der direkte Süßwasserzufluß aus Elbe, Weser und Ems beträgt in die Deutsche Bucht bei 29 PSU ca. 11%.Die berechneten Anteile sind Mittelwerte über den gesamten Beobachtungszeitraum; die Anzahl der Messungen läßt eine genauere Unterscheidung in zeitliche und räumliche Variabilität der Zusammensetzung nicht zu.Die Größe des jeweils bestimmten Anteils am Meerwasser stellt gleichzeitig den Transferfaktor der Konzentration zwischen der Nuklidkonzentration im Ursprungsgewässer (z. B. dem Rhein) und der sich daraus einstellenden Konzentration in der Deutschen Bucht dar. Ferner wurden die Transferfaktoren der Konzentration in Verbindung mit aus der Literatur entnommenen Größen der jährlichen Abflußmengen der Ursprungsgewässer genutzt, um auch die Transferfaktoren der jährlichen Einbringung zu ermitteln. So ergibt die jährliche Einbringung von 10¹⁵ Bq eines Nuklides z. B. in den Rhein bei 33,5 PSU in der Deutschen Bucht eine mittlere Konzentration von 0,34 Bq/l.Als Anwendungsbeispiel und zur Überprüfung der Richtigkeit der Transferfaktoren wird die Auswertung des Tritiumauslasses bei La Hague auf die Deutsche Bucht berechnet und mit den gemessenen Werten verglichen.

  相似文献   

The 1 Mpc giant head-tail radio galaxy IC 711: 3-dimensional simulation and additional constraints on the ram pressure theory     

J. P. Vallée 《Astrophysics and Space Science》1988,149(2):225-231

Recent observations of the longest known head-tail galaxy IC 711, at long wavelengths have shown it to extend farther than previously known. At δ 74 cm, Vallée and Roger (1987) found it to stretch 17′ (930 kpc) behind the optical nucleus of this elliptical galaxy. At δ92 cm, Vallée and Strom (1988) found it to stretch 18.3′ (1 Mpc) behind the optical nucleus. What new physics can be learned from it? To that end, a theoretical simulation in 3 dimensions of the longest head-tail galaxy has been performed, building the radio trail cell by cell inside a volume of space composed of 8 million cells, with each cell being assigned a proper radio emissivity. Matching ram pressure theory and recent observations yields a primary fast decrease of the radio luminosity with time or distance from the optical nucleus of the galaxy, and a secondary periodic variation of the radio luminosity every 500 kpc. Near the end of the tail, a sudden and unpredicted flare-up of the observed width of the tail requires a sudden change in the jet's physical conditions about 2 Gyr earlier, or that of the surroundings. These simulations provide some additional constraints on the ram pressure theory. Along the tail ridge, particle aging and particle acceleration must combine to give a luminosity function that mimics an exponential decrease with time. Across the tail ridge, no edge brightening is necessary, suggesting that particle aging and particle acceleration must combine via central turbulences and central instabilities (not by edge effects). The disappearance of the radio trail at two points along the radio ridge is unexpected from the ram pressure theory. Thus particle aging and particle acceleration must combine once more to mimic a sinusoidal modulation with time of the radio luminosity, perhaps near the nucleus inside the optical galaxy.  相似文献   

Archean high-Mg monzodiorite–syenite,epidote skarn,and biotite–sericite gold lodes in the Granny Smith–Wallaby district,Australia: U–Pb and Re–Os chronometry of two intrusion-related hydrothermal systems     

Andreas G. Mueller  Gregory C. Hall  Alexander A. Nemchin  Holly J. Stein  Robert A. Creaser  Douglas R. Mason 《Mineralium Deposita》2008,43(3):337-362

The Granny Smith (37 t Au production) and Wallaby deposits (38 t out of a 180 t Au resource) are located northeast of Kalgoorlie, in 2.7 Ga greenstones of the Eastern Goldfields Province, the youngest orogenic belt of the Yilgarn craton, Western Australia. At Granny Smith, a zoned monzodiorite–granodiorite stock, dated by a concordant titanite–zircon U–Pb age of 2,665 ± 3 Ma, cuts across east-dipping thrust faults. The stock is fractured but not displaced and sets a minimum age for large-scale (1 km) thrust faulting (D2), regional folding (D1), and dynamothermal metamorphism in the mining district. The local gold–pyrite mineralization, controlled by fractured fault zones, is younger than 2,665 ± 3 Ma. In augite–hornblende monzodiorite, alteration progressed from a hematite-stained alkali feldspar–quartz–calcite assemblage and quartz–molybdenite–pyrite veins to a late reduced sericite–dolomite–albite assemblage. Gold-related monazite and xenotime define a U–Pb age of 2,660 ± 5 Ma, and molybdenite from veins a Re–Os isochron age of 2,661 ± 6 Ma, indicating that mineralization took place shortly after the emplacement of the main stock, perhaps coincident with the intrusion of late alkali granite dikes. At Wallaby, a NE-trending swarm of porphyry dikes comprising augite monzonite, monzodiorite, and minor kersantite intrudes folded and thrust-faulted molasse. The conglomerate and the dikes are overprinted by barren (<0.01 g/t Au) anhydrite-bearing epidote–actinolite–calcite skarn, forming a 600-m-wide and >1,600-m-long replacement pipe, which is intruded by a younger ring dike of syenite porphyry pervasively altered to muscovite + calcite + pyrite. Skarn and syenite are cut by pink biotite–calcite veins, containing magnetite + pyrite and subeconomic gold–silver mineralization (Au/Ag = 0.2). The veins are associated with red biotite–sericite–calcite–albite alteration in adjacent monzonite dikes. Structural relations and the concordant titanite U–Pb age of the skarn constrain intrusion-related mineralization to 2,662 ± 3 Ma. The main-stage gold–pyrite ore (Au/Ag >10) forms hematite-stained sericite–dolomite–albite lodes in stacked D2 reverse faults, which offset skarn, syenite, and the biotite–calcite veins by up to 25 m. The molybdenite Re–Os age (2,661 ± 10 Ma) of the ore suggests a genetic link to intrusive activity but is in apparent conflict with a monazite–xenotime U–Pb age (2,651 ± 6 Ma), which differs from that of the skarn at the 95% confidence level. The time relationships at both gold deposits are inconsistent with orogenic models invoking a principal role for metamorphic fluids released during the main phase of compression in the fold belt. Instead, mineralization is related in space and time to late-orogenic, magnetite-series, high-Mg monzodiorite–syenite intrusions of mantle origin, characterized by Mg/(Mg + Fe_TOTAL) = 0.31–0.57, high Cr (34–96 ppm), Ni (22–63 ppm), Ba (1,056–2,321 ppm), Sr (1,268–2,457 ppm), Th (15–36 ppm), and rare earth elements (total REE: 343–523 ppm). At Wallaby, shared Ca–K–CO₂ metasomatism and Th-REE enrichment (in allanite) link Au–Ag mineralization in biotite–calcite veins to the formation of the giant epidote skarn, implicating a Th + REE-rich syenite pluton at depth as the source of the oxidized hydrothermal fluid. At Granny Smith, lead isotope data and the Rb–Th–U signature of early hematite-bearing wall-rock alteration point to fluid released by the source pluton of the differentiated alkali granite dikes.  相似文献   

Detailed <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar dating of geologic events associated with the Mantos Blancos copper deposit,northern Chile     

Verónica Oliveros  Gilbert Féraud  Luis Aguirre  Luis Ramírez  Michel Fornari  Carlos Palacios  Miguel Parada 《Mineralium Deposita》2008,43(3):281-293

The ⁴⁰Ar/³⁹Ar geochronological method was applied to date magmatic and hydrothermal alteration events in the Mantos Blancos mining district in the Coastal Cordillera of northern Chile, allowing the distinction of two separate mineralization events. The Late Jurassic Mantos Blancos orebody, hosted in Jurassic volcanic rocks, is a magmatic-hydrothermal breccia-style Cu deposit. Two superimposed mineralization events have been recently proposed. The first event is accompanied by a phyllic hydrothermal alteration affecting a rhyolitic dome. The second mineralization event is related to the intrusion of bimodal stocks and sills inside the deposit. Because of the superposition of several magmatic and hydrothermal events, the obtained ⁴⁰Ar/³⁹Ar age data are complex; however, with a careful interpretation of the age spectra, it is possible to detect complex histories of successive emplacement, alteration, mineralization, and thermal resetting. The extrusion of Jurassic basic to intermediate volcanic rocks of the La Negra Formation is dated at 156.3 ± 1.4 Ma (2σ) using plagioclase from an andesitic lava flow. The first mineralization event and associated phyllic alteration affecting the rhyolitic dome occurred around 155–156 Ma. A younger bimodal intrusive event, supposed to be equivalent to the bimodal stock and sill system inside the deposit, is probably responsible for the second mineralization event dated at ca. 142 Ma. Other low-temperature alteration events have been dated on sericitized plagioclase at ca. 145–146, 125, and 101 Ma. This is the first time that two distinct mineralization events have been documented from radiometric data for a copper deposit in the metallogenic belt of the Coastal Cordillera of northern Chile. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

Relationship between footwall composition,crustal contamination,and fluid–rock interaction in the Platreef,Bushveld Complex,South Africa     

Julie Pronost  Chris Harris  Christian Pin 《Mineralium Deposita》2008,43(8):825-848

In the northern limb of the 2.06-Ga Bushveld Complex, the Platreef is a platinum group elements (PGE)-, Cu-, and Ni-mineralized zone of pyroxenite that developed at the intrusion margin. From north to south, the footwall rocks of the Platreef change from Archaean granite to dolomite, hornfels, and quartzite. Where the footwall is granite, the Sr-isotope system is more strongly perturbed than where the footwall is Sr-poor dolomite, in which samples show an approximate isochron relationship. The Nd-isotope system for samples of pyroxenite and hanging wall norite shows an approximate isochron relationship with an implied age of 2.17 ± 0.2 Ga and initial Nd-isotope ratio of 0.5095. Assuming an age of 2.06 Ga, the ɛNd values range from −6.2 to −9.6 (ave. −7.8, n = 17) and on average are slightly more negative than the Main Zone of the Bushveld. These data are consistent with local contamination of an already contaminated magma of Main Zone composition. The similarity in isotope composition between the Platreef pyroxenites and the hanging wall norites suggests a common origin. Where the country rock is dolomite, the Platreef has generally higher plagioclase and pyroxene δ ¹⁸O values, and this indicates assimilation of the immediate footwall. Throughout the Platreef, there is considerable petrographic evidence for sub-solidus interaction with fluids, and the Δ _{plagioclase–pyroxene} values range from −2 to +6, which indicates interaction at both high and low temperatures. Whole-rock and mineral δD values suggest that the Platreef interacted with both magmatic and meteoric water, and the lack of disturbance to the Sr-isotope system suggests that fluid–rock interaction took place soon after emplacement. Where the footwall is granite, less negative δD values suggest a greater involvement of meteoric water. Consistently higher values of Δ _{plagioclase–pyroxene} in the Platreef pyroxenites and hanging wall norites in contact with dolomite suggest prolonged interaction with CO₂-rich fluid derived from decarbonation of the footwall rocks. The overprint of post crystallization fluid–rock interaction is the probable cause of the previously documented lack of correlation between PGE and sulfide content on the small scale. The Platreef in contact with dolomite is the focus of the highest PGE grades, and this suggests that dolomite contamination played a role in PGE concentration and deposition, but the exact link remains obscure. It is a possibility that the CO₂ produced by decarbonation of assimilated dolomite enhanced the process of PGE scavenging by sulfide precipitation.  相似文献   

The Mordor Alkaline Igneous Complex,Central Australia: PGE-enriched disseminated sulfide layers in cumulates from a lamprophyric magma     

Stephen J. Barnes  J. A. C. Anderson  T. R. Smith  L. Bagas 《Mineralium Deposita》2008,43(6):641-662

The Mordor Alkaline Igneous Complex (MAIC) is a composite intrusion comprising a body of syenite and a funnel-shaped layered mafic–ultramafic intrusion of lamprophyric parentage, the Mordor Mafic–Ultramafic Intrusion or MMUI. The MMUI is highly unusual among intrusions of lamprophyric or potassic parentage in containing primary magmatic platinum-group element (PGE)-enriched sulfides. The MMUI sequence consists largely of phlogopite-rich pyroxenitic cumulates, with an inward dipping conformable layer of olivine-bearing cumulates divisible into a number of cyclic units. Stratiform-disseminated sulfide accumulations are of two types: disseminated layers at the base of cyclic units, with relatively high PGE tenors; and patchy PGE-poor disseminations within magnetite-bearing upper parts of cyclic units. Sulfide-enriched layers at cycle bases contain anomalous platinum group element contents with grades up to 1.5 g/t Pt+Pd+Au over 1-m intervals, returning to background values of low parts per billion (ppb) on a meter scale. They correspond to reversals in normal fractionation trends and are interpreted as the result of new magma influxes into a continuously replenished magma chamber. Basal layers have decoupled Cu and PGE peaks reflecting increasing PGE tenors up-section, due to increasing R factors during the replenishment episode, or progressive mixing of between resident PGE-poor magma and more PGE-enriched replenishing magma. The presence of PGE enriched sulfides in cumulates from a lamprophyric magma implies that low-degree partial melts do not necessarily leave sulfides and PGEs in the mantle restite during partial melting. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

Fluid and source magma evolution of the Questa porphyry Mo deposit,New Mexico,USA   总被引：14，自引：1，他引：13  

Leonhard M. Klemm  Thomas Pettke  Christoph A. Heinrich 《Mineralium Deposita》2008,43(5):533-552

Combined fluid inclusion microthermometry and microanalysis by laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) are used to constrain the hydrothermal processes forming a typical Climax-type porphyry Mo deposit. Molybdenum mineralisation at Questa occurred in two superimposed hydrothermal stages, a magmatic-hydrothermal breccia and later stockwork veining. In both stages, texturally earliest fluids were single-phase, of low salinity (~7 wt.% NaCl_equiv.) and intermediate-density. Upon decompression to ~300 bar, they boiled off a vapour phase, leaving behind a residual brine (up to 45 wt.% NaCl_equiv) at temperatures of ~420°C. The highest average Mo concentrations in this hot brine were ~500 μg/g, exceeding the Mo content of the intermediate-density input fluid by about an order of magnitude and reflecting pre-concentration of Mo by fluid phase separation prior to MoS₂ deposition from the brine. Molybdenum concentrations in brine inclusions, then, decrease down to 5 μg/g, recording Mo precipitation in response to cooling of the saline liquid to ~360°C. Molybdenite precipitation from a dense, residual and probably sulphide-depleted brine is proposed to explain the tabular shape of the ore body and the absence of Cu-Fe sulphides in contrast to the more common Cu-Mo deposits related to porphyry stocks. Cesium and Rb concentrations in the single-phase fluids of the breccia range from 2 to 8 and from 40 to 65 μg/g, respectively. In the stockwork veins, Cs and Rb concentrations are significantly higher (45–90 and 110–230 μg/g, respectively). Because Cs and Rb are incompatible and hydrothermally non-reactive elements, the systematic increase in their concentration requires two distinct pulses of fluid exsolution from a progressively more fractionated magma. By contrast, major element and ore metal concentrations of these two fluid pulses remain essentially constant. Mass balance calculations using fluid chemical data from LA-ICPMS suggest that at least 25 km³ of melt and 7 Gt of deep input fluid were necessary to provide the amount of Mo contained in the stockwork vein stage alone. While the absolute amounts of fluid and melt are uncertain, the well-constrained element ratios in the fluids together with empirical fluid/melt partition coefficients derived from the inclusion analyses suggest a high water content of the source melt of ~10%. In line with other circumstantial evidence, these results suggest that initial fluid exsolution may have occurred at a confining pressure exceeding 5 kbar. The source of the molybdenum-mineralising fluids probably was a particularly large magma chamber that crystallised and fractionated in the lower crust or at mid-crustal level, well below the shallow intrusions immediately underlying Questa and other porphyry molybdenum deposits. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

Late Carboniferous porphyry copper mineralization at La Voluntad,Neuquén,Argentina: Constraints from Re–Os molybdenite dating     

Mirta Garrido  Fernando Barra  Eduardo Domínguez  Joaquin Ruiz  Victor A. Valencia 《Mineralium Deposita》2008,43(5):591-597

The La Voluntad porphyry Cu–Mo deposit in Neuquén, Argentina, is one of several poorly known porphyry-type deposits of Paleozoic to Early Jurassic age in the central and southern Andes. Mineralization at La Voluntad is related to a tonalite porphyry from the Chachil Plutonic Complex that intruded metasedimentary units of the Piedra Santa Complex. Five new Re–Os molybdenite ages from four samples representing three different vein types (i.e., quartz–molybdenite, quartz–sericite–molybdenite and quartz–sericite–molybdenite ± chalcopyrite–pyrite) are identical within error and were formed between ~312 to ~316 Ma. Rhenium and Os concentrations range between 34 to 183 ppm and 112 to 599 ppb, respectively. The new Re–Os ages indicate that the main mineralization event at La Voluntad, associated to sericitic alteration, was emplaced during a time span of 1.7 ± 3.2 Ma and that the deposit is Carboniferous in age, not Permian as previously thought. La Voluntad is the oldest porphyry copper deposit so far recognized in the Andes and indicates the presence of an active magmatic arc, with associated porphyry style mineralization, at the proto-Pacific margin of Gondwana during the Early Pennsylvanian.  相似文献   

Magnetotelluric investigations for imaging electrical structure of Garhwal Himalayan corridor,Uttarakhand, India     

M. Israil  D. K. Tyagi  P. K. Gupta  Sri Niwas 《Journal of Earth System Science》2008,117(3):189-200

Magnetotelluric investigations have been carried out in the Garhwal Himalayan corridor to delineate the electrical structure of the crust along a profile extending from Indo-Gangetic Plain to Higher Himalayan region in Uttarakhand, India. The profile passing through major Himalayan thrusts: Himalayan Frontal Thrust (HFF), Main Boundary Thrust (MBT) and Main Central Thrust (MCT), is nearly perpendicular to the regional geological strike. Data processing and impedance analysis indicate that out of 44 stations MT data recorded, only 27 stations data show in general, the validity of 2D assumption. The average geoelectric strike, N70°W, was estimated for the profile using tensor decomposition. 2D smooth geoelectrical model has been presented, which provides the electrical image of the shallow and deeper crustal structure. The major features of the model are (i) a low resistivity (<50Ωm), shallow feature interpreted as sediments of Siwalik and Indo-Gangetic Plain, (ii) highly resistive (> 1000Ωm) zone below the sediments at a depth of 6 km, interpreted as the top surface of the Indian plate, (iii) a low resistivity (< 10Ωm) below the depth of 6 km near MCT zone coincides with the intense micro-seismic activity in the region. The zone is interpreted as the partial melting or fluid phase at mid crustal depth. Sensitivity test indicates that the major features of the geoelectrical model are relevant and desired by the MT data.  相似文献