Flexural isostatic response of the Alps to increased Quaternary erosion recorded by foreland basin remnants,SE France     

Jean‐Daniel Champagnac  Peter Van Der Beek  Gaël Diraison  Samuel Dauphin 《地学学报》2008,20(3):213-220

We test the hypothesis that flexural isostatic compensation of the mass removed by enhanced Quaternary erosion is responsible for uplift of the Western European Alps and their forelands. We use two well‐preserved and well‐dated (1.8 Ma) abandonment surfaces of foreland basin remnants in SE France (the Chambaran and Valensole plateaux) as passive benchmarks for tilting of the foreland. Estimating their initial slope from morphometric scaling relationships, we determine bulk post‐depositional tilting of 0.5–0.8% for these surfaces. The calculated isostatic response of the Alpine lithosphere to erosional unloading, using the method recently proposed by Champagnac et al. [Geology 35 (2007) 195–198] , yields a predicted tilting of 0.3–0.4% in the considered areas, explaining approximately half of the determined post‐depositional tilting. Such long‐term deformation being insensitive to cyclic loading/unloading because of glaciations, we suspect the other half to be related to as yet undetermined long‐wavelength and long‐lived tectonic process(es).  相似文献   

Importance of spawning location and timing to successful transport to nursery areas: a simulation study of Gulf of Alaska walleye pollock   总被引：2，自引：0，他引：2  

Hinckley  Sarah; Hermann  Albert J.; Mier  Kathy L.; Megrey  Bernard A. 《ICES Journal of Marine Science》2001,58(5):1042-1052

  相似文献   

In Situ Measurement of Pinna nobilis Shells for Age and Growth Studies:
A New Device     

Jos Rafael García‐March  Antonio Manuel García‐Carrascosa  lvaro Luís Pea 《Marine Ecology》2002,23(3):207-217

Abstract. Pinna nobilis Linnaeus 1758 is an endemic bivalve mollusc in the Mediterranean Sea, where it inhabits seagrass meadows, especially Posidonia oceanica (L.) Delile. It is the largest bivalve in the Mediterranean, reaching lengths up to 120 cm. In its natural habitat, P. nobilis lives with the anterior part of the valve buried in the seabed, attached to Posidonia rhizomes by byssus threads.
This habit makes it impossible to measure its total length directly in situ. As the only way to determine the individual age is the relationship between age and total length, several equations have been proposed to estimate total length by relating it to the unburied parts of the shell. Such measurements are essential to ecological studies that consider age, growth, and population dynamics, and that evaluate the environmental factors that affect this species.
Accurately estimating total length depends on the accuracy and precision of the method employed to measure the unburied shell parts. In this paper, we point out the lack of precision of the instruments and methods used until now; we also demonstrate the reason for this imprecision. A new device to measure unburied parts of Pinna nobilis with a precision comparable to that obtained when measuring extracted valves is described. This device is unaffected by substratum type and reduces measurement time. The latter is a very important feature, because these procedures are usually performed whilst SCUBA diving. Finally, a growth equation has been fitted to the measurements obtained with the new device from a population located in Moraira (Alicante, western Mediterranean).  相似文献   

Genetic Relationships Among One Non-Endemic and Two Endemic Mediterranean Triplefin Blennies (Pisces, Blennioidei)   总被引：1，自引：0，他引：1  

Gerard J. Geertjes  Albert Kamping  Wilke van Delden  & John J. Videler 《Marine Ecology》2001,22(3):255-265

Abstract. Three triplefin blennies occur sympatrically in the Mediterranean Sea; Tripterygion tripteronotus and T. melanurus are endemic, whereas T. delaisi is also found in the Eastern Atlantic. Although very similar in morphology, ecology and behaviour, some striking differences exist among reproductive strategies. Several authors proposed hypotheses on the evolution of these species. In order to enhance insight into the genetic structure of this genus, an enzyme electrophoretic survey was performed. Samples of 40 to 45 specimens of each species were collected near Calvi (Corsica, France). Twenty-four enzyme loci were analysed, of which 17 appeared polymorphic. T. delaisi showed a high level of average observed heterozygosity (H_o) of 0.140, as opposed to very low levels of 0.009 and 0.021 in T. tripteronotus and T. melanurus , respectively. Nei's genetic distance was 0.21 between T. delaisi and T. tripteronotus , 0.35 between T. delaisi and T. melanurus and 0.45 between T. tripteronotus and T. melanurus . We hypothesise that divergence of these species started before the Pleistocene and that the endemic species survived the Pleistocene glaciations in refugia within the Mediterranean. The possibility that T. tripteronotus and T. delaisi diverged through sympatric speciation is discussed.  相似文献   

Microzooplankton production in the oceans   总被引：7，自引：0，他引：7  

Landry  Michael R.; Calbet  Albert 《ICES Journal of Marine Science》2004,61(4):501-507

  相似文献   

Structural similarity and variety at the tips in a wide range of strike–slip faults: a review     

Young‐Seog Kim  David J. Sanderson 《地学学报》2006,18(5):330-344

Strike–slip faults are often accompanied by a variety of structures, particularly at their tips. The zones of additional fracturing are classified as tip‐damage zones. These zones can be subdivided into several different damage patterns based on the nature and orientation of faults and fractures developed. Damage zones at the ends of small strike–slip faults (mode II tips) develop wing cracks, horsetail splays, antithetic faults, synthetic branch faults and solution surfaces. Similar tip‐damage patterns are also commonly observed at larger (regional) scales, but with a dominance of faulting over tensile cracks and solution surfaces. Wing cracks and horsetail splays developed at small‐scale faults are replaced by normal faults in large‐scale faults. Antithetic faults and synthetic branch faults are observed at small and large scales. Thrust faults are developed at large scales, in a similar pattern to solution surfaces at a small scale. All these structures may show slightly different angular relationships to the master fault at small and large scale, but develop in response similar stress distribution and mechanics around the fault. Thus, mode II tip‐damage zones show similar patterns over a wide range of fault scales.  相似文献   

Impact of Flood Disasters on Taiwan in the Last Quarter Century     

Wei-Hsien Teng  Ming-Hsi Hsu  Chung-Hsing Wu  Albert S. Chen 《Natural Hazards》2006,37(1-2):191-207

The increasing natural disasters, especially floods during the last quarter century, are raising the economic losses in Taiwan. The most severe hazard in Taiwan is flooding induced by typhoons and storms in summer and autumn. By comparing the rivers around the world, the ones in Taiwan have the steepest slopes, the largest discharge per unit drainage area, and the shortest time of concentrations. Rapid urbanization without proper land uses managements usually worsen the flood problems. Consequently, flood hazards mitigation has become the most essential task for Taiwan to deal with. Although the government keeps improving flood defense structures, the flood damage grows continuously. In this article, possible flood mitigation strategies are identified for coping with complex environmental and social decisions with flood risk involved.  相似文献   

Food Deserts in the Prairies? Supermarket Accessibility and Neighborhood Need in Edmonton,Canada*     

Karen E. Smoyer‐Tomic  John C. Spence  Carl Amrhein 《The Professional geographer》2006,58(3):307-326

The U.S. and U.K. literatures have discussed “food deserts,” reflecting populated, typically urban, low‐income areas with limited access to full‐service supermarkets. Less is known about supermarket accessibility within Canadian cities. This article uses the minimum distance and coverage methods to determine supermarket accessibility within the city of Edmonton, Canada, with a focus on high‐need and inner‐city neighborhoods. The results show that for 1999 both of these areas generally had higher accessibility than the remainder of the city, but six high‐need neighborhoods had poor supermarket accessibility. We conclude by examining potential reasons for differences in supermarket accessibility between Canadian, U.S., and U.K. cities.  相似文献   

Structural damage detection using the optimal weights of the approximating artificial neural networks     

Shih‐Lin Hung  C. Y. Kao 《地震工程与结构动力学》2002,31(2):217-234

This work presents a novel neural network‐based approach to detect structural damage. The proposed approach comprises two steps. The first step, system identification, involves using neural system identification networks (NSINs) to identify the undamaged and damaged states of a structural system. The partial derivatives of the outputs with respect to the inputs of the NSIN, which identifies the system in a certain undamaged or damaged state, have a negligible variation with different system errors. This loosely defined unique property enables these partial derivatives to quantitatively indicate system damage from the model parameters. The second step, structural damage detection, involves using the neural damage detection network (NDDN) to detect the location and extent of the structural damage. The input to the NDDN is taken as the aforementioned partial derivatives of NSIN, and the output of the NDDN identifies the damage level for each member in the structure. Moreover, SDOF and MDOF examples are presented to demonstrate the feasibility of using the proposed method for damage detection of linear structures. Copyright © 2001 John Wiley & Sons, Ltd.  相似文献   

A mathematical hysteretic model for elastomeric isolation bearings     

J. S. Hwang  J. D. Wu  T.‐C. Pan  G. Yang 《地震工程与结构动力学》2002,31(4):771-789

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献