Field measurements in river embankments: validation and management with spatial database and webGIS     

Lucia Simeoni  Paolo Zatelli  Claudio Floretta 《Natural Hazards》2014,71(3):1453-1473

This study focuses on the development of a system with a spatial database and a webGIS able to store, validate and display the data to assist the decision makers in managing early warning systems for river embankment failure. In order to obtain precise results, it is essential to have a tool with ability of managing a large number of data for checking their reliability and for locating them in the space. In this paper, special emphasis was given in the development of procedures to assess the reliability of the measures. For this purpose, the database includes all the information needed to describe the instrument performance, such as the sand pack size and casing diameter of open-standpipe piezometers for evaluating their time lag, and the calibration curves of transducers with the possibility of their updating. The position of the non-functioning instruments is identified through the analysis of the electrical signal and spatial displays, while the analyses of the redundancy and coherence of measures is used for detecting doubtful data. Database and webGIS were applied to the monitoring data of an embankment of the Adige River in Northern Italy. The database and webGIS system has proved to be a suitable and effective tool for the management and validation of real-time data and periodical field measurements.  相似文献   

Large-scale stratigraphic architecture and sequence analysis of an early Pleistocene submarine canyon fill,Monte Ascensione succession (Peri-Adriatic basin,eastern central Italy)     

Claudio Di Celma  Riccardo Teloni  Andrea Rustichelli 《International Journal of Earth Sciences》2014,103(3):843-875

The Monte Ascensione succession (c. 2.65–2.1 Ma) is a well-exposed example of an exhumed submarine canyon fill embedded within slope hemipelagic mudstones. This gorge represented a long-lasting pathway for sediment transport and deposition and during the Gelasian delivered Apennine-derived clastic sediment to the adjacent Peri-Adriatic basin. A total of six principal lithofacies types, representing both canyon-confining hemipelagic deposits and canyon-filling turbidity current and mass-transport deposits, can be delineated in the studied sedimentary succession. The canyon-fill deposits display a marked cyclic character and the component lithofacies succeed one another to form at least fifteen fining-upward stratal units, which are interpreted to represent high-frequency, unconformity-bounded depositional sequences. Variability in the vertical repetition of constituent lithofacies allows the identification of three basic styles of sequence architecture that can be interpreted in terms of differing positions along a conceptual down-canyon depositional profile. An integrated chronology, based on biostratigraphic data and on palaeomagnetic polarity measurements, strongly supports a one-to-one correlation between the sequence-bounding surfaces and oxygen isotope stages G2–78, suggesting that the most feasible sequence-engendering mechanism is that of orbitally dictated glacio-eustatic changes in sea level, which regulated timing of sediment storage on the shelf and its redistribution beyond the shelf edge. One of the most significant aspects of this study is the demonstration that processes occurring within upper slope canyons can be expected to be strongly influenced by variations in sea level; that is, the erosional and depositional features evident in these deposits can be strongly controlled by allocyclic processes rather than autocyclic or random processes.  相似文献   

Numerical modeling and mechanical analysis of an innovative soil anchoring system     

Claudio di Prisco  Federico Pisanò 《Acta Geotechnica》2014,9(6):1013-1028

In this paper, the pull-out performance of an innovative system for soil anchoring is mechanically interpreted on the basis of a preliminary finite element investigation. The system consists of a tie rod equipped with thick steel sockets, extruding into the soil to increase the overall pull-out bearing capacity. The effectiveness of the anchorage is shown to be mainly due to the steel sockets, producing two correlated strength mechanisms: a direct one, associated with the shear/flexural strength of the sockets themselves; and an indirect one, in the form of a remarkable increase in the normal confinement on the tie rod and hence in the mobilizable shear stresses. The numerical results are finally exploited to conceive a simplified mechanical model for the interpretation/prediction of the pull-out anchor performance.  相似文献   

Stratigraphic evolution from shoreface to shelf-indenting channel depositional systems during transgression: Insights from the lower Pliocene Súa Member of the basal Upper Onzole Formation,Borbón Basin,northwest Ecuador     

Claudio Di Celma  Gino Cantalamessa  Walter Landini  Luca Ragaini 《Sedimentary Geology》2010,223(1-2):162-179

Shelf-indenting canyons and their tributary systems are fairly common constituents of Quaternary shelves of active continental margins, but they have been rarely reported from older successions. Recognition of these prominent geomorphologic features in the ancient record has important implications not only for a proper understanding of shoreface-to-shelf depositional systems, but also from a petroleum exploration standpoint as they represent efficient conduits for moving coarse-grained river- and nearshore-borne sediments to the adjacent slope even during periods of relative rise in sea level.Coastal exposures of the lower Pliocene Súa Member in the surroundings of Súa (northwest Ecuador), preserve the unusual juxtaposition of incising submarine channels onto nearshore deposits. This succession accumulated along a narrow, active continental margin during tectonically induced transgression and affords a rare opportunity to evaluate the stratigraphic evolution of such systems from an outcrop perspective. A comprehensive facies characterization combined with application of sequence stratigraphic concepts has led to definition of the following physical surfaces and stratal units in ascending order. (i) A polygenetic, regionally extensive erosional surface resulting from the superposition of the wave ravinement surface onto the previous subaerial sequence boundary (SB/wRS). (ii) A nearshore, sand-prone lithofacies succession comprising a condensed basal shellbed deepening upwards through lower-shoreface bioturbated silty sandstones, into inner shelf sandy mudstones. (iii) Two steep, U-shaped erosional features (turbidite shelf-entrenchment surfaces), interpreted as shelf channels, deeply incised into the subjacent nearshore sediments and marking an abrupt deepening of facies. (iv) A thick, fining-upward sedimentary succession laid down within the confines of the channels by high- and low-density turbidity currents and including both bed-load (traction) and suspended-load deposits; the overall fining- and thinning-upward character exhibited by the infill of these channels is thought to reflect decreasing flow energies and is consistent with the gradual cut-off of clastic influx to their upper reaches in response to progressive detachment from an adjacent coastal source during relative rise in sea level.Based on detailed analysis of facies and a sequence stratigraphic interpretation of outcrop data, this study contributes to extend the existing sequence stratigraphic schemes, further attesting that shelf-sediment bypass and deep-water sedimentation can take place at sea levels other than lowstand.  相似文献   

Global nature of the Paleoproterozoic Lomagundi carbon isotope excursion: A review of occurrences in Brazil,India, and Uruguay   总被引：2，自引：0，他引：2  

Anil Maheshwari  Alcides N. Sial  Claudio Gaucher  Jorge Bossi  Andrey Bekker  Valderez P. Ferreira  Antonio W. Romano 《Precambrian Research》2010

Positive carbon isotope excursion is reported from Paleoproterozoic carbonates of the Aravalli Supergroup (northwestern India), the Minas Supergroup (Brazil), and new sections of the Paso Severino Formation (Uruguay). The 2.42 Ga Gandarela Formation, Minas Gerais, Brazil, contains red carbonate-facies BIF grading into dolostones and limestones and yielding δ¹³C values ranging from −1.6 to +0.4‰ V-PDB. The positive C-isotope excursion (up to + 11‰ V-PDB) in marine shallow-water carbonates in India and Brazil (Jhamarkotra Formation in northwestern India, and Cercadinho and Fecho do Funil formations in Minas Gerais State, Brazil) is comparable to that observed in 2.22–2.1 Ga carbonate successions worldwide that were deposited during the Lomagundi excursion. In Uruguay, δ¹³C values up to +11.6‰ V-PDB in the deep-water Paso Severino Formation of the Piedra Alta Terrane are compatible with deposition at ca. 2.15 Ga, as indicated by the 2146 ± 7 Ma U–Pb age of dacites occurring at the top of the unit. Negative δ¹³C values are also present in carbonates of the Paso Severino Formation, but an origin related to organic-matter remineralization cannot be ruled out. Thin carbonate beds in the Rio Itapicuru greenstone belt, Bahia State, Brazil, are associated, as in the Paso Severino Formation, with deep-water black shales and have carbon isotope values up to +9‰ V-PDB. High metamorphic grade carbonates of the Jacurici terrane in the Medrado-Ipueira area, Bahia, Brazil, have carbon isotope values up to +6.9‰ V-PDB, consistent with their minimum age of 2085 ± 5 Ma inferred from the intrusive contact with and the age of the Medrado norite. No evidence was found in India, Brazil, or Uruguay for Paleoproterozoic glacial events recognized in the 2.45–2.22 Ga sedimentary successions worldwide. Unconformities between the Gandarela and Cercadinho formations in Brazil and the banded gneissic Complex and the Lower Aravalli Supergroup in India might explain the absence of glacial record. Compositional and isotopic data presented here for studied Paleoproterozoic carbonate successions allow their integration into the global record of the Paleoproterozoic evolution as well as correlation with other successions of similar age. The study highlights the global nature of the Lomagundi excursion. Furthermore, it indicates that the Lomagundi excursion is recorded in both shallow-water (Aravalli and Minas supergroups) and deep-water carbonates (Paso Severino Formation and Rio Itapicuru greenstone belt) negating a significant impact of stromatolite productivity and hypersaline conditions on carbon isotope values of carbonates deposited in shallow-water, open-marine and isolated basins.  相似文献   

Copper accumulation by bacteria and transfer to scallop larvae     

Miranda CD  Rojas R 《Marine pollution bulletin》2006,52(3):293-300

A bacterial copper-resistant strain was isolated from a hatchery-conditioned adult of the scallop Argopecten purpuratus and was identified as Vibrio sp. according to its physiological characteristics. The lowest concentration of Cu2+ required for its complete inhibition in VNSS medium was 50 microg ml(-1). The Vibrio strain was found to accumulate copper, exhibiting cellular and loosely bound copper levels of 201.14 and 493.21 microg g(-1) dry weight, respectively, after 24 h of incubation in VNSS medium supplemented with 15 microg ml(-1) of Cu2+, with cellular concentration factors of 10.17 and 14.35 after 12 and 24 h of exposure. When a scallop larvae culture was exposed to a concentration of 6.46 x 10(2) CFU ml(-1) of Cu-enriched Vibrio, they accumulated 20.42 +/- 1.12 and 30.96 +/- 1.85 microg Cu2+ g(-1) dry weight after 12 and 24 h, respectively. This study suggests that bacterial copper accumulation could be very active in marine environments increasing the occurrence of copper transfer to marine food chains.  相似文献   

Loess and dust on Earth and Mars: particle generation by impact mechanisms     

Ken O’Hara-Dhand  Richard L. S. Taylor  Ian James Smalley  David H. Krinsley  Claudio Vita-Finzi 《Central European Journal of Geosciences》2010,2(1):45-51

Impact between windblown quartz grains as a source of desert dust is consistent with laboratory abrasion experiments and has received some field confirmation in the Negev. The suggestion is that an important process on Mars now gains support from laboratory studies; even though their geochemical interpretation is controversial, they show that dust generation by impact is tenable even for quartz. A simple mechanism for small dust production from sand seas is proposed; internal stresses can be mobilized by impact energy. A speculative mechanism (the andesite scenario) is proposed for fine particle production by particle impact on Mars. The internal stress range in terrestrial sand grains may vary, depending on the nature of the source rock, and this may influence particle production by impact processes.  相似文献   

Precipitable water evaluations from infrared sun‐photometric measurements analyzed using the atmospheric hygrometry technique     

Claudio Tomasi  Stefano Marani  Vito Vitale  Frank Wagner  Alessandra Cacciari  Angelo Lupi 《Tellus. Series B, Chemical and physical meteorology》2000,52(2):734-749

Measurements of direct solar irradiance were taken employing 4 different sun‐photometers at near infrared wavelengths, suitable for use in atmospheric hygrometry. This technique utilising a set of spectral ratios, in and out of selected water vapour absorption bands, was applied to the measurements to obtain accurate evaluations of precipitable water. For all the hygrometric ratios given by the 4 sun‐photometers used at the 3 stations of Sagres, Monchique and Mt. Foia, during the CLEARCOLUMN experiment, we determined the calibration curves by correcting them for the Rayleigh scattering effects and, then, plotting the natural logarithms of such corrected ratios versus the square root of the water vapour mass present along the atmospheric slant path. The regression lines drawn for the various scatter diagrams were estimated to give evaluations of precipitable water with an uncertainty of less than 5%, 3% and 10% at the 3 stations, respectively. The calibration curves of the sun‐photometer located at the Sagres station were determined using the precipitable water evaluations obtained from the local radiosounding measurements taken on 5 clear‐sky days. Those of the sun‐photometers used at the Monchique and Mt. Foia stations were instead determined through intercomparison between subsets of measurements simultaneously taken with various instruments at Sagres and Mt. Foia. Using these calibration curves, we examined all the field measurements determining the time‐patterns of precipitable water at the 3 stations. During the period from 16 June to 25 July 1997, precipitable water was found to vary between 1.1 and 3.7 g cm⁻² at the Sagres station (with an accuracy within ±13%), between 1.0 and 2.8 g cm⁻² at Monchique (±11%) and between 0.8 and 3.0 g cm⁻² at the top of Mt. Foia (±26%).  相似文献   

Direct air capture of CO2 with chemicals: optimization of a two-loop hydroxide carbonate system using a countercurrent air-liquid contactor     

Marco Mazzotti  Renato Baciocchi  Michael J. Desmond  Robert H. Socolow 《Climatic change》2013,118(1):119-135

Direct Air Capture (DAC) of CO₂ with chemicals, recently assessed in a dedicated study by the American Physical Society (APS), is further investigated with the aim of optimizing the design of the front-end section of its benchmark two-loop hydroxide-carbonate system. Two new correlations are developed that relate mass transfer and pressure drop to the air and liquid flow velocities in the countercurrent packed absorption column. These relationships enable an optimization to be performed over the parameters of the air contactor, specifically the velocities of air and liquid sorbent and the fraction of CO₂ captured. Three structured Sulzer packings are considered: Mellapak-250Y, Mellapak-500Y, and Mellapak-CC. These differ in cost and pressure drop per unit length; Mellapak-CC is new and specifically designed for CO₂ capture. Scaling laws are developed to estimate the costs of the alternative DAC systems relative to the APS benchmark, for plants capturing 1 Mt of CO₂ per year from ambient air at 500 ppm CO₂ concentration. The optimized avoided cost hardly differs across the three packing materials, ranging from $518/tCO₂ for M-CC to $568/tCO₂ for M-250Y. The $610/tCO₂ avoided cost for the APS-DAC design used M-250 Y but was not optimized; thus, optimization with the same packing lowered the avoided cost of the APS system by 7 % and improved packing lowered the avoided cost by a further 9 % The overall optimization exercise confirms that capture from air with the APS benchmark system or systems with comparable avoided costs is not a competitive mitigation strategy as long as the energy system contains high-carbon power, since implementation of Carbon Capture and Storage, substitution with low-carbon power and end-use efficiency will offer lower avoided-cost strategies.  相似文献   

A detailed modelling of the chemically rich clumps along the CB3 outflow     

Milena Benedettini  Jeremy A. Yates  Serena Viti  Claudio Codella 《Monthly notices of the Royal Astronomical Society》2006,370(1):229-238

  相似文献