排序方式： 共有97条查询结果，搜索用时 15 毫秒
81.
Experimental and numerical investigation for energy dissipation of supercritical flow in sudden contractions 
下载免费PDF全文
下载免费PDF全文 Rasoul Daneshfaraz Ehsan Aminvash Reza Esmaeli Sina Sadeghfam John Abraham 《地下水科学与工程》2020,8(4):396-406
Dealing with kinetic energy is one of the most important problems in hydraulic structures, and this energy can damage downstream structures. This study aims to study energy dissipation of supercritical water flow passing through a sudden contraction. The experiments were conducted on a sudden contraction with 15 cm width. A 30 cm wide flume was installed. The relative contraction ranged from 8.9 to 9.7, where relative contraction refers to the ratio of contraction width to initial flow depth. The Froude value in the investigation varied from 2 to 7. The contraction width of numerical simulation was 5~15 cm, the relative contraction was 8.9~12.42, and the Froude value ranged from 8.9~12.42. In order to simulate turbulence, the k-ε RNG model was harnessed. The experimental and numerical results demonstrate that the energy dissipation increases with the increase of Froude value. Also, with the sudden contraction, the rate of relative depreciation of energy is increased due to the increase in backwater profile and downstream flow depth. The experimentation verifies the numerical results with a correlation coefficient of 0.99 and the root mean square error is 0.02. 相似文献
82.
Probabilistic Seismic Loss Estimation is a methodology used as a quantitative and explicit expression of the performance of buildings using terms that address the interests of both owners and insurance companies. Applying the ATC 58 approach for seismic loss assessment of buildings requires using Incremental Dynamic Analysis (IDA), which needs hundreds of time-consuming analyses, which in turn hinders its wide application. The Endurance Time Method (ETM) is proposed herein as part of a demand propagation prediction procedure and is shown to be an economical alternative to IDA. Various scenarios were considered to achieve this purpose and their appropriateness has been evaluated using statistical methods. The most precise and efficient scenario was validated through comparison against IDA driven response predictions of 34 code conforming benchmark structures and was proven to be sufficiently precise while offering a great deal of efficiency. The loss values were estimated by replacing IDA with the proposed ETM-based procedure in the ATC 58 procedure and it was found that these values suffer from varying inaccuracies, which were attributed to the discretized nature of damage and loss prediction functions provided by ATC 58. 相似文献
83.
A risk‐based life cycle cost strategy for optimal design and evaluation of control methods for nonlinear structures 下载免费PDF全文
下载免费PDF全文 The lack of direct correspondence between control objectives and hazard risks over the lifetime of systems is a key shortcoming of current control techniques. This along with the inability to objectively analyze the benefits and costs of control solutions compared with conventional methods has hindered widespread application of control systems in seismic regions. To address these gaps, this paper offers 2 new contributions. First, it introduces risk‐based life cycle–cost (LCC) optimal control algorithms, where LCC is incorporated as the performance objective in the control design. Two strategies called risk‐based linear quadratic regulator and unconstrained risk‐based regulator are subsequently proposed. The considered costs include the initial cost of the structure and control system, LCC of maintenance, and probabilistically derived estimates of seismic‐induced repair costs and losses associated with downtime, injuries, and casualties throughout the life of the structure. This risk‐based framework accounts for uncertainties in both system properties and hazard excitations and uses outcrossing rate theory to estimate fragilities for various damage states. The second contribution of this work is a risk‐based probabilistic framework for LCC analysis of existing and proposed control strategies. The proposed control designs are applied to the nonlinear model of a 4‐story building subjected to seismic excitations. Results show that these control methods reduce the LCC of the structure significantly compared with the status quo option (benefits of up to $1 351 000). The advancements offered in this paper enhance the cost‐effectiveness of control systems and objectively showcase their benefits for risk‐informed decision making. 相似文献
84.
The computerized ionospheric tomography is a method for imaging the Earth’s ionosphere using a sounding technique and computing the slant total electron content (STEC) values from data of the global positioning system (GPS). The most common approach for ionospheric tomography is the voxel-based model, in which (1) the ionosphere is divided into voxels, (2) the STEC is then measured along (many) satellite signal paths, and finally (3) an inversion procedure is applied to reconstruct the electron density distribution of the ionosphere. In this study, a computationally efficient approach is introduced, which improves the inversion procedure of step 3. Our proposed method combines the empirical orthogonal function and the spherical Slepian base functions to describe the vertical and horizontal distribution of electron density, respectively. Thus, it can be applied on regional and global case studies. Numerical application is demonstrated using the ground-based GPS data over South America. Our results are validated against ionospheric tomography obtained from the constellation observing system for meteorology, ionosphere, and climate (COSMIC) observations and the global ionosphere map estimated by international centers, as well as by comparison with STEC derived from independent GPS stations. Using the proposed approach, we find that while using 30 GPS measurements in South America, one can achieve comparable accuracy with those from COSMIC data within the reported accuracy (1 × 1011 el/cm3) of the product. Comparisons with real observations of two GPS stations indicate an absolute difference is less than 2 TECU (where 1 total electron content unit, TECU, is 1016 electrons/m2). 相似文献
85.
86.
Hafeez Amna Ehsan Muhsan Abbas Ayesha Shah Munawar Shahzad Rasim 《Natural Hazards》2022,111(2):2097-2115
Natural Hazards - Satellite based thermal anomaly occurs as a substantial precursor for strong earthquakes, as the need for earthquake precursor detection has very important for impending main... 相似文献
87.
Noori Hirad Shamimi Shirinabadi Reza Moosavi Ehsan Gholinejad Mehran 《Geotechnical and Geological Engineering》2022,40(4):2051-2062
Geotechnical and Geological Engineering - In this study, peak particle velocity (PPV) values for driving three piles with diameters of 40 cm, 50 cm, and 70 cm in a clayey... 相似文献
88.
Polycyclic aromatic hydrocarbons (PAHs) are types of hazardous contaminants, which their ingestion could cause severe consequences on human health. Leakages from storage tanks, underground pipelines, and evaporation ponds are the main sources of soil and groundwater contaminations at the Tehran Oil Refinery area (TOR site), located in south of Tehran, Iran. In this study, soil samples were collected from different locations at and adjacent to a polluted stream in the south of the refinery. The samples were analyzed for two hazardous PAH compounds, namely benzo[a]anthracene and acenaphthene. The clean up levels due to the accidental ingestion of contaminated soils at the site were also investigated in accordance to the U.S.EPA guidelines. Comparing the soil analysis results indicated that the benzo[a]anthracene concentrations in the samples varied from 53 to 299 mg/kg, which were higher than the clean up level of 1.17 mg/kg. Thus, soil remediation is required for this contaminant. The acenaphthene analysis results denoted that the average concentration of this contaminant was below the clean up level of 116.67 mg/kg, indicating that no treatment for this contaminant is necessary at the TOR site. Also, because the slope of the ground extends to the south of the stream, which stimulates the migration of the contaminants in this direction due to advection and dispersion mechanisms, the average of benzo[a]anthracene concentrations in south samples was higher than north samples (i.e., Cavg(S) = 160 ppm, Cavg(N) = 113 ppm). Various treatment techniques such as thermal desorption, soil vapor extraction (SVE), and solidification/stabilization (S/S) were investigated for this site. Due to moderate to high plasticity and relatively low permeability of the soil and low volatility of benzo[a]anthracene, however S/S method is recommended as a practical approach for the remediation of the soil at the site. 相似文献
89.
Supervised injection facilities (SIFs) are medical facilities where injection drug users can inject their illicit drugs under the supervision of nurses and doctors. Currently, there is only one legal SIF in operation in North America and it has been operating in Vancouver, British Columbia for over a decade. The purpose of this study is to determine whether the current facility needs to be expanded to other locations in British Columbia, Canada. We employ mathematical modeling to estimate the number of new human immunodeficiency virus (HIV) and hepatitis C infections prevented based on the available secondary data. Additionally, we also estimate the number of prevented overdose deaths attributable to the SIF. With very conservative estimates, it is predicted that establishing two SIFs locations outside Vancouver in British Columbia’s capital city, Victoria, is cost-effective, with a benefit-cost ratio of 1.25:1. It appears that expanding SIFs to Victoria could offer significant savings for local health care institutions. 相似文献
90.
利用支持向量分类(SVC)估算断层深度和特征选择(英文) 总被引：1，自引：0，他引：1
Mohammad Ehsan Hekmatian Vahid E. Ardestani Mohammad Ali Riahi Ayyub Memar Koucheh Bagh Jalal Amini 《应用地球物理》2013,10(1):88-96
地下断层深度的估算是重力解释难题之一,我们试利用支持向量分类(SVC)法进行计算。使用正演和非线性反演技术,通过相关误错使检测地下断层深度成为可能。但必要有一个深度初始猜测值,而且这猜测值通常不是由重力资料得。本文我们介绍以SVC作为利用重力数据估算断层深度的一种手段。在这项研究中,我们假设一种地下断层深度可归为一种类型,SVC作为一个分类算法。为了有效地利用此SVC算法,我们基于一个正确的特征选择算法去选择正确的深度特征。本次研究中我们建立了一套基于不同深度地下断层的合成重力剖面训练集,用以训练用于计算实际的地下断层深度的SVC代码。然后用其它合成重力剖面训练集测试我们训练的SVC代码,同时也用实际资料验证了我们的训练SVC代码。 相似文献