Age of intrusion and rapid cooling of the Frankenstein gabbro (Odenwald,SW-Germany) evidenced by40Ar/39Ar and single-zircon207Pb/206Pb measurements     

Herbert Kirsch Dipl.-Geol.  Dr. Bernd Kober  Prof. Dr. Hans Joachim Lippolt 《International Journal of Earth Sciences》1988,77(3):693-711

The Frankenstein gabbro complex in the northern Odenwald/FR Germany is one of the Hercynian plutonic bodies of the Saxothuringian zone in the Variscan belt.⁸⁷Sr/⁸⁶Sr isotopic investigations on pyroxene,⁴⁰Ar/³⁹Ar age determinations on hornblendes, plagioclases, biotites and pyroxenes and²⁰⁷Pb/²⁰⁶Pb dating on single zircon crystals have been carried out. The⁸⁷Sr/⁸⁶Sr initial ratio of the gabbro (0.70380) indicates uncontaminated derivation of the magma from the mantle. The results on hornblendes, plagioclases and zircons establish the isotopic age of intrusion and the mode of cooling. Pyroxene and biotite data indicate disturbed K-Ar systems of these minerals. The average ages of the hornblendes (363±7 Ma), of the plagioclases (359±3 Ma) and of the zircons (362 ±9 Ma) agree within the 1-sigma levels and constrain the early history of the plutonic intrusion at the turn from Devonian to Carboniferous times. These minerals must have been cooled below their closure temperatures within a time-interval shorter than the error margins of 10 Ma. The ages therefore are, unlike those of the neighbouring Bergsträßer Odenwald, not long-time cooling ages due to largescale and slow geological uplift of the crustal segment. Instead, they will closely estimate the time of intrusion of the Frankenstein pluton into a shallow crustal level. The hiatus of about 20 Ma compared to the average ages of the crystalline rocks of the Bergsträßer Odenwald in the south characterizes the mafic Frankenstein pluton as a separated unit of the Odenwald crystalline, and underlines the importance of the Carboniferous tectonic fault zone in-between. The present data set clearly demonstrates the importance of the applied combination of methods and techniques to constrain the history of intrusion and cooling of mafic plutonic rocks.  相似文献   

Defining biominerals and organominerals: Direct and indirect indicators of life. Perry et al., Sedimentary Geology, 201, 157–179     

Wladyslaw Altermann  Christine Böhmer  Frank Gitter  Florian Heimann  Inga Heller  Benjamin Läuchli  Constanze Putz 《Sedimentary Geology》2009,213(3-4):150-151

  相似文献   

Distribution patterns and stable carbon isotopic composition of alkanes and alkan-1-ols from plant waxes of African rain forest and savanna C3 species     

Angela Vogts  Heiko Moossen  Florian Rommerskirchen  Jürgen Rullkötter 《Organic Geochemistry》2009,40(10):1037-1054

Leaf wax components of terrestrial plants are an important source of biomass in the geological records of soils, lakes and marine sediments. Relevant to the emerging use of plant wax derived biomarkers as proxies for past vegetation composition this study provides key data for C₃ plants of tropical and subtropical Africa. We present analytical results for 45 savanna species and 24 rain forest plants sampled in their natural habitats. Contents and distribution patterns of long chain n-alkanes (n-C₂₅ to n-C₃₅) and n-alkan-1-ols (n-C₂₄ to n-C₃₄) as well as bulk and molecular carbon isotopic data are presented. The variations of the analysed parameters among different growth forms (herb, shrub, liana and tree) are small within the vegetation zones, whereas characteristic differences occur between the signatures of rain forest and savanna plants. Therefore, we provide averaged histogram representations for rain forest and savanna C₃ plants.The findings were compared to previously published data of typical C₄ grass waxes of tropical and subtropical Africa. Generally, trends to longer n-alkane chains and less negative carbon isotopic values are evident from rain forest over C₃ savanna to C₄ vegetation. For n-alkanols of rain forest plants the maximum of the averaged distribution pattern is between those of C₃ savanna plants and C₄ grasses. The averaged presentations for tropical and subtropical vegetation and their characteristics may constitute useful biomarker proxies for studies analysing the expansion and contraction of African vegetation zones.  相似文献   

Assessing the Perth Basin geothermal opportunity: Preliminary results from simulations of heat transfer and fluid flow     

Heather A. Sheldon  Thomas Poulet  J. Florian Wellmann  Klaus Regenauer-Lieb  Mike Trefry  Franklin G. Horowitz  Klaus Gessner 《Journal of Geochemical Exploration》2009

  相似文献   

Contrasting fluid evolution of granulite-facies marbles: implications for a high-T intermediate-P terrain in the Famatinian Range, San-Juan, Argentina     

Florian Gallien  Aberra Mogessie  Ernesto Bjerg  Sergio Delpino  Brigida Castro de Machuca 《Mineralogy and Petrology》2009,95(1-2):135-157

High-temperature, intermediate-pressure calc-silicate marbles occur in the granulite-facies terrain of the La Huerta Range in the Province of San Juan, NW-Argentina, in three bulk-compositional varieties: Type (1) dolomite-absent scapolite-wollastonite-grandite-clinopyroxene-quartz—calcite marbles; Type (2) diopside-forsterite-spinel-corundum—calcite marbles with dolomite exolution lamellae in calcite; Type (3) serpentinized forsterite-spinel-dolomite marbles. An isobaric cooling path from peak-metamorphic conditions of 860°C to 750°C at 6.5 kbar is inferred from scapolite-wollastonite-grandite reaction textures in Type (1) and is consistent with cooling after an advective heat input from related gabbroic and tonalitic intrusive bodies. Stable carbon and oxygen isotope geochemistry was used to decipher the fluid/rock evolution of the three marble types. An interpreted four-stage temperature-time-fluid flow path comprises: (1) infiltration of pre-peak-metamorphic fluids, depleted in δ¹⁸O, that caused a shift of primary sedimentary δ¹⁸O ratios to lower values (19.6–20.0); (2) syn-metamorphic fluid liberation from Type (1) marbles with evidence for processes close to batch devolatilization that caused a weak coupled ¹³C and ¹⁸O depletion during prograde metamorphism. A different devolatilization behaviour, close to Rayleigh fractionation, texturally associated with fold settings indicates that granulite-facies fluid flow was focused rather than pervasive; (3) H₂O-absent conditions were dominant when coronal grandite formed during incipient high-temperature isobaric cooling at the expense of scapolite and wollastonite in the Type (1) marbles; (4) intense post-peak- hydration of Type (2) and Type (3) marbles is the last recognizable metasomatic event. In combination, the three marble types record fluid infiltration both before and after the metamorphic peak.  相似文献   

Textural, chemical, and isotopic effects of late-magmatic carbonatitic fluids in the carbonatite–syenite Tamazeght complex, High Atlas Mountains, Morocco     

Michael A. W. Marks  Florian Neukirchen  Torsten Vennemann  Gregor Markl 《Mineralogy and Petrology》2009,97(1-2):23-42

Carbonatites of the Eocene Tamazeght complex, High Atlas Mountains, Morocco, consist of calciocarbonatites (alvikite and sövite dykes) and magnesiocarbonatites (diatreme breccias and dykes rocks). These are associated with ultramafic, shonkinitic, gabbroic to monzonitic and various foid syenitic silicate units. Stable and radiogenic isotope compositions for carbonatites and silicate rocks indicate that they share a common source in the mantle, although for some carbonatitic samples contamination with sedimentary rocks seems important. The observed isotopic heterogeneity is mainly attributed to source characteristics, fractional crystallization (accompanied by various degrees of assimilation), and late- to post-magmatic fluid–rock interaction. During the late fluid–rock interaction, Sr, Mn, and possibly also Fe were mobilized and redistributed to form secondary carbonate minerals in carbonatites. These fluids also penetrated into the adjacent syenitic rocks, causing enrichment in the same elements.  相似文献   

Landslides, Ice Quakes, Earthquakes: A Thermodynamic Approach to Surface Instabilities     

Klaus Regenauer-Lieb  David A. Yuen  Florian Fusseis 《Pure and Applied Geophysics》2009,166(10-11):1885-1908

The total rate of rock deformation results from competing deformation processes, including ductile and brittle mechanisms. Particular deformation styles arise from the dominance of certain mechanisms over others at different ambient conditions. Surprisingly, rates of deformation in naturally deformed rocks are found to cluster around two extremes, representing coseismic slip rates or viscous creep rates. Classical rock mechanics is traditionally used to interpret these instabilities. These approaches consider the principle of conservation of energy. We propose to go one step further and introduce a nonlinear far-from-equilibrium thermodynamic approach in which the central and explicit role of entropy controls instabilities. We also show how this quantity might be calculated for complex crustal systems. This approach provides strain-rate partitioning for natural deformation processes occurring at rates in the order of 10^-3 to 10^-9 s^-1. We discuss these processes using examples of landslides and ice quakes or glacial surges. We will then illustrate how the mechanical mechanisms derived from these near-surface processes can be applied to deformation near the base of the seismogenic crust, especially to the phenomenon of slow earthquakes.  相似文献   

Characteristics of developing scour-holes at a sand-embedded cylinder   总被引：3，自引：2，他引：1  

Oscar LINK  Florian PFLEGER  and Ulrich ZANKE Dr.-Ing.  Assistant Prof.  Dept. of Civil Engineering  University of Concepción  Edmundo Larenas  Concepción  Chile. Doctoral Research Fellow  Institute for Hydromechanics  Technische Universitt München  Arcisstrasse  München  Germany. Full Prof.  Institute for Hydraulic  Water Resources Engineering  Darmstadt University of Technology  Rundeturmstraβe  Germany. 《国际泥沙研究》2008,23(3):258-266

Characteristics of developing scour-holes at a sand-embedded 0.2 m diameter circular cylinder are presented. Non-intrusive, high-resolution topographic measurements of developing scour-holes were made with an experimental installation using a laser distance sensor （LDS） and precision step-motors. A clear-water experiment was conducted with bed shear stress equal to 95% of the critical bed shear stress for the initiation of sediment motion at the undisturbed plane sand bed with a d50 of 0.26 mm. During the running experiment of 21 hours duration, measurements were taken by the LDS in different azimuthal half-planes with θ= 0, 15, 30, 45, 60, 75, 90, 105, 120, 135, 150, 165 and 180° in order to study the spatio-temporal variation of geometric properties in developing scour-holes. After 21 hours, the equilibrium condition was approached, with a scour rate less than d50 per hour. Measurement of maximum scour depth in different azimuthal half-planes at different points in time during the experiment show that scour started at the cylinder side and surrounded the cylinder after about 20% of experiment time. Slopes of developing scour-holes presented three regions with different inclinations, which were attributed to vortex action. Both maximum scour depth and maximum scour radius at different azimuthal half-planes are well correlated with the maximum scour depth at plane with θ = 0°. When providing maximum scour depth at the cylinder front, the presented correlations are useful for simple calculation of scour-hole topography. This work provides an experimental database for advanced numerical simulation for loose sediment hydraulics.  相似文献   

Multi-method global sensitivity analysis of flood inundation models   总被引：1，自引：0，他引：1  

Florian Pappenberger  Keith J. Beven  Marco Ratto  Patrick Matgen 《Advances in water resources》2008

Global sensitivity analysis is a valuable tool in understanding flood inundation models and deriving decisions on strategies to reduce model uncertainty. In this paper, a sensitivity analysis of a one-dimensional flood inundation model (HEC-RAS) on the River Alzette, Luxembourg, is presented. It is impossible to define sensitivity in a unique way and different methods can lead to a difference in ranking of importance of model factors. In this paper five different methods (Sobol, Kullback–Leibler entropy, Morris, regionalised sensitivity analysis and regression) are applied and the outcomes on selected examples compared. It is demonstrated that the different methods lead to completely different ranking of importance of the parameter factors and that it is impossible to draw firm conclusions about the relative sensitivity of different factors. Moreover, the uncertainty inherent in the sensitivity methods is highlighted.  相似文献   

From geotechnical analysis to quantification and modelling using LiDAR data: a study on rockfall in the Reintal catchment,Bavarian Alps,Germany     

Tobias Heckmann  Martin Bimböse  Michael Krautblatter  Florian Haas  Michael Becht  David Morche 《地球表面变化过程与地形》2012,37(1):119-133

In the year 2007, enhanced rockfall activity was observed within the scarp of a 500 BP rockslide in the Reintal catchment (Northern Calcareous Alps, Germany); the largest of a series of events took place in August, when almost 50000 m³ of rock were detached from the subvertical rock face and deposited on a talus cone. In this case study, we focus on three aspects of rockfall research: first, we compile detailed geomorphological and geotechnical findings to explain the causes of the recent events. The results of laboratory tests and stability estimations suggest that rockfall activity will persist in the future as the old rockslide scarp still contains unstable rock masses. Second, we use digital elevation data from a pre‐event airborne LiDAR survey (ALS) and post‐event terrestrial laserscanning (TLS) to quantify landform changes and the mass balance of the rockfall event(s). The widespread availability of ALS elevation data provides a good opportunity to quantify fresh events using a comparatively inexpensive TLS survey; this approach is complicated by uncertainties resulting from the difficult coregistration of ALS and TLS data and the specific geometric problems in steep (ALS) and flat (TLS) terrain; it is therefore limited to at least medium‐sized events. Third, the event(s) is simulated using the results of the LiDAR surveys and a modified GIS‐based rockfall model in order to test its capability of predicting the extent and the spatial distribution of deposition on the talus cone. Results show that the model generally reproduces the process domain and the spatial distribution of topographic changes but frequently under‐ and over‐estimates deposition heights. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献