全球地学断面图数字化指南     

H.-J.Gotze  R.T.Williams  周琦  刘心铸 《地球学报》1993,14(2):185-195

  相似文献   

The common agricultural policy and the general environmental policies concerned with agriculture in the European Community and their implications for fertilizer consumption     

A. J. Williams 《Marine pollution bulletin》1994,29(6-12):500-507

This paper traces the major developments in the European Common Agricultural Policy (CAP) and related environmental policy and examines their impact on the use of crop nutrients. The objectives of the CAP were set out in the Treaty of Rome in 1957 and have not been explicitly revised. The Community has, however, progressed from being a significant importer to a major exporter of food. Various changes in the policy measures/reforms, have been implemented, each to control the continuing increase in farm output. The latest of these in May 1992 reduced commodity prices towards world market levels, introduced 15% set aise for arable land, as well as agreeing a number of agri-environmental measures. Further changes are anticipated following the Uruguay Round of the General Agreement on Tariffs and Trade (GATT) and as new trade agreements are reached with the countries of the former Eastern Bloc. Inevitably, existing farm systems will be subject to careful reappraisal. The Community's environmental objectives were added to the Treaty in 1987 with the passing of the European Single Act. The interaction between agriculture and the environment has been a prominent concern. The Directive 91/676, which seeks to protect water against pollution caused by nitrate from agricultural sources, is the first Directive to have a major direct impact on farm practive. The Fifth Environmental Action Plan for 1993–2000 ‘Towards Sustainability’ selects agriculture as one of five industries for specific attention. The plan seeks an extensification of agriculture and a reduction in the use of chemicals. Changes in the amount of plant nutrients from both farmyard manure and mineral fertilizers used in agriculture are quantified. Methods of determining the efficiency with which they are utilized are assessed. New advisory techniques which will improve the efficiency of nutrient use on the farm are considered, as are the implications for the future demand for nutrients from mineral fertilizers. This paper is the view of the European Fertilizer Manufacturers Association.  相似文献   

Reply to 'Can magnetic-force microscopy determine micromagnetic structures?' by Grütter and Allenspach     

W. Williams  V. Hoffmann  F. Heider  T. Göddenhenrich  C. Heiden 《Geophysical Journal International》1994,116(2):506-507

  相似文献   

Desertification,drought and landcare: Australia's role in an international convention to combat desertification     

Martin Williams  Megan McCarthy  Geoff Pickup 《The Australian geographer》1995,26(1):23-32

  相似文献   

Factors Affecting Efficient Aquifer Restoration at In Situ Uranium Mine Sites     

James L. Osiensky  Roy E. Williams 《Ground Water Monitoring & Remediation》1990,10(2):107-112

In situ mining of uranium typically requires the injection of a reactive leaching solution (lixiviant) such as sodium carbonate/bicarbonate, ammonium carbonate/bicarbonate, or sulfuric acid, and an oxidant such as hydrogen peroxide or oxygen into an ore-bearing, confined aquifer. It also requires the environmental restoration of the source aquifer. The stratigraphy of sandstone uranium deposits typically consists of interbedded layers of poorly consolidated sands and clays and gravels deposited in fluvial or coastal environments. The parameters that influence the migration of lixiviant during mining and restoration in these environments include induced hydraulic gradients, hydrodynamic dispersion, heterogeneity, anisotropy, physicochemical reactions, leakage into and/or through confining layers, and convergence of flow lines due to partial well penetration.
The effectiveness of the various methods of aquifer restoration is sit -specific and is dependent upon the site hydrogeology and hydrogeochemistry, and the chemistry of the lixiviant. Each method of aquifer restoration has advantages and disadvantages. Selection of the most effective and economically feasible method requires detailed knowledge of the site-specific hydrogeologic conditions.  相似文献   

Time-scale calibration by high-precision UPb zircon dating of interstratified volcanic ashes in the Ordovician and Lower Silurian stratotypes of Britain     

R.D. Tucker  T.E. Krogh  R.J. Ross Jr.  S.H. Williams 《Earth and Planetary Science Letters》1990,100(1-3)

High initial parent/daughter element ratios and a unique dual decay scheme make UPb zicron ages more precise and reliable than most isotopic ages, and thus inherently superior for time-scale calibration. Employing improved techniques to the conventional method of UPb dating, we have analyzed microgram-size (2–12 × 10⁻⁸ g) zircon fractions from biostratigraphically controlled volcanic ashes and dated key Paleozoic time-markers with a precision better than 1% (±2Ma). Four of the stratotype samples from Britain for which fission-track ages [1] were previously reported have yielded improved ages of:438.7 ± 2.0Ma for the lower Silurian zone of Coronograptus cyphus from Llandovery strata at Dob's Linn, southern Scotland;457.5 ± 2.2 Ma for a Middle Ordovician Caradoc (Longvillian) ash near Bala, North Wales, and;465.7 ± 2.1and464.6 ± 1.8 Ma for the Didymograptus artus Zone and the type Didymograptus Murchisoni Zone, respectively, of the Llanvirn Series at Arenig Fawr and Abereiddi Bay, Wales. Another sample from the zone of Dicellograptus anceps (P. pacificus Subzone) of the Ashgill Series at Dob's Linn has been dated at445.7 ± 2.4Ma, suggesting placement of the Ordovician-Silurian time boundary at approximately 441 Ma. A sixth bentonite from Caradocian age strata of North America (Spechts Ferry Shale, Decorah Formation, Missouri) is453.7 ± 1.8Ma old, indicating that the Rocklandian Stage of the Mohawkian Series is only slightly younger than the Longvillian Stage of the Caradoc Series in Britain.  相似文献   

Monitoring active volcanoes and mitigating volcanic hazards: the case for including simple approaches     

Richard E. Stoiber  Stanley N. Williams 《Journal of Volcanology and Geothermal Research》1990,42(1-2)

Simple approaches to problems brought about eruptions and their ensuing hazardous effects should be advocated and used by volcanologists while awaiting more sophisticated remedies. The expedients we advocate have all or many of the following attributes: only locally available materials are required; no extensive training of operators or installation is necessary; they are affordable and do not require foreign aid or exports; they are often labor intensive and are sustainable without outside assistance. Where appropriate, the involvement of local residents is advocated. Examples of simple expedients which can be used in forecasting or mitigating the effects of crises emphasize the relative ease and the less elaborate requirements with which simple approaches can be activated. Emphasis is on visual observations often by untrained observers, simple meteorogical measurements, observations of water level in lakes, temperature and chemistry of springs and fumaroles, new springs and collapse areas and observations of volcanic plumes. Simple methods are suggested which can be applied to mitigating damage from mudflows, nuées ardentes, tephra falls and gas discharge. A review in hindsight at Ruiz includes the use of both chemical indicators and simple mudflow alarms. Simple expedients are sufficiently effective that any expert volcanologist called to aid in a crisis must include them in the package of advice offered. Simple approaches are a critical and logical complement to highly technical solutions to hazardous situations.  相似文献   

Magnetic fabrics of the Bloodgood Canyon and Shelley Peak Tuffs,southwestern New Mexico: implications for emplacement and alteration processes     

Sheila J Seaman  William C McIntosh  John W Geissman  Michael L Williams  Wolfgan E Elston 《Bulletin of Volcanology》1991,53(6):460-476

Anisotropy of magnetic susceptibility (AMS) of the middle Tertiary Bloodgood Canyon and Shelley Peak Tuffs of the Mogollon-Datil volcanic field has been used to (1) evaluate the ability of AMS to constrain flow lineations in low-susceptibility ash-flow tuffs; (2) establish a correlation between magnetic fabric, magnetic mineralogy, tuff facies, and characteristics of the depositional setting; and (3) constrain source locations of the tuffs. The tuffs are associated with the overlapping Bursum caldera and Gila Cliff Dwellings basin. The high-silica Bloodgood Canyon Tuff fills the Gila Cliff Dwellings basin and occurs as thin outcrops outside of the basin. The older Shelley Peak Tuff occurs as thin outcrops both along the boundary between the two structures, and outside of the complex. AMS data were collected from 16 sites of Bloodgood Canyon Tuff basin fill, 19 sites of Bloodgood Canyon Tuff outflow, and 11 sites of Shelley Peak Tuff. Sites were classified on the basis of within-site clustering of orientations of principal susceptibility axes, based on the categories of Knight et al. (1986). Most microscopically visible oxide minerals in the Bloodgood Canyon Tuff outflow and basin fill, and in the Shelley Peak Tuff are members of the hematite-ilmenite solid solution series. However, IRM acquisition data indicate that Bloodgood Canyon Tuff basin fill and Shelley Peak Tuff have magnetic mineralogy dominated by single- or pseudo-single-domain magnetite, and that the magnetic mineralogy of the Bloodgood Canyon Tuff outflow is dominated by hematite. Hematite in Bloodgood Canyon Tuff outflow is likely to be the result of deuteric and/or low-temperature alteration of magnetite and iron silicate minerals. Bulk magnetic susceptibility is higher in magnetite-dominated ash-flow tuff (Bloodgood Canyon Tuff basin fill and Shelley Peak Tuff) than it is in hematite-dominated ash-flow tuff (Bloodgood Canyon Tuff outflow). Bloodgood Canyon Tuff outflow has the highest total anisotropy (H) of the three units, followed by Shelley Peak Tuff and Bloodgood Canyon Tuff basin fill. All three ash-flow tuffs are genearlly characterized by oblate susceptibility ellipsoids, with those of the Bloodgood Canyon Tuff basin fill nearest to spherical. At high values of total anisotropy, Shelley Peak Tuff susceptibility ellipsoids attain a prolate shape; those of Bloodgood Canyon Tuff outflow attain an increasingly oblate shape. Three factors may influence differences in total anisotropy and susceptibility ellipsoid shape: (1) ash which travelled the greatest distance before deposition may show the best development of magnetic fabric, particularly of magnetic lineation; (2) deposition of ash in a closed basin may inhibit laminar flow throughout the sheet and the resulting development of flow textures; and (3) replacement of magnetite and iron silicates preferentially oriented within the foliation plane by hematite with strong crystalline anisotropy may enhance the magnetic susceptibility within that plane. Scatter in AMS axis orientation within sites may result from: (1) greater orientation inaccuracy in block-sampled than in fielddrilled samples; (2) rheomorphism; and (3) low accuracy of AMS measurement in low-susceptibility ashflow tuffs. Evaluation of flow lineation based on AMS of sites with well-clustered K ₁ axes indicates that (1) Bloodgood Canyon Tuff basin fill flowed along a generally northwest-southeast azimuth; (2) Shelley Peak Tuff located on the boundary of the Bursum caldera and the Gila Cliff Dwellings basin flowed along a nearly east-west azimuth; and (3) Bloodgood Canyon Tuff outflow sites have K ₁ susceptibility axes generally radial to the Bursum-Gila Cliff Dwellings complex, but within-site scatter of K ₁ orientations is generally too large to draw conclusions about flow lineation orientation. Limited petrographic work on pilot thin sections adds flow direction information to AMS-derived flow lineation information.  相似文献   

Road construction using lateritic soil     

Umarany Mahalinga-Iyer  David J. Williams 《Engineering Geology》1994,37(3-4):199-210

The suitability of a lateritic soil developed on olivine basalt in western southeast Queensland, Australia, as paving material has been investigated. The particle size distribution and plasticity characteristics of the soil do not comply with the standard specification for paving materials. However, the soil has a high shear strength, resulting in a low Western Australian Confined Compression Test class number. The high shear strength of the soil at its in situ moisture content is due to its high angle of shearing resistance and its suction under in situ moisture conditions. Volumetric shrinkage of the soil does not constitute a problem as its shrinkage is low. The in situ strength of a pavement constructed with the lateritic soil, determined using a Clegg impact hammer, and the field dry density, have increased with time and the passage of traffic since construction. The pavement performance was good. A criteria suitable for the selection of a lateritic soil as paving material under the climatic conditions prevailing in western southeast Queensland has been suggested.  相似文献   

COMMENT     

Truman W. Bennett  Bennett  Williams 《Ground water》1985,23(6):805-805

  相似文献