Strength and stability of frictional sliding of gabbro gouge at elevated temperatures   总被引：7，自引：1，他引：7  

Changrong He  Wenming Yao  Zeli Wang  Yongsheng Zhou   《Tectonophysics》2006,427(1-4):217

To investigate the strength of frictional sliding and stability of mafic lower crust, we conducted experiments on oven-dried gabbro gouge of 1 mm thick sandwiched between country rock pieces (with gouge inclined 35° to the sample axis) at slip rates of 1.22 × 10^− 3 mm/s and 1.22 × 10^− 4 mm/s and elevated temperatures up to 615 °C. Special attention has been paid to whether transition from velocity weakening to velocity strengthening occurs due to the elevation of temperature.Two series of experiments were conducted with normal stresses of 200 MPa and 300 MPa, respectively. For both normal stresses, the friction strengths are comparable at least up to 510 °C, with no significant weakening effect of increasing temperature. Comparison of our results with Byerlee's rule on a strike slip fault with a specific temperature profile in the Zhangbei region of North China shows that the strength given by experiments are around that given by Byerlee's rule and a little greater in the high temperature range.At 200 MPa normal stress, the steady-state rate dependence a − b shows only positive values, probably still in the “run-in” process where velocity strengthening is a common feature. With a normal stress of 300 MPa, the values of steady-state rate dependence decreases systematically with increasing temperature, and stick-slip occurred at 615 °C. Considering the limited displacement, limited normal stress applied and the effect of normal stress for the temperatures above 420 °C, it is inferred here that velocity weakening may be the typical behaviour at higher normal stress for temperature above 420 °C and at least up to 615 °C, which covers most of the temperature range in the lower crust of geologically stable continental interior. For a dry mafic lower crust in cool continental interiors where frictional sliding prevails over plastic flow, unstable slip nucleation may occur to generate earthquakes.  相似文献   

Postcollisional flow of aqueous fluid within ultrahigh-pressure eclogite in the Dabie orogen   总被引：1，自引：0，他引：1  

Tian-Shan Gao  Song-Shan Wang  Bing Gong  Yuan-Bao Wu  Yong-Fei Zheng   《Journal of Geochemical Exploration》2006,89(1-3):115

A combined study of chronometric dating and oxygen isotope analysis for minerals from vein and host eclogite as well as regional country-rock gneiss in the Dabie orogen provides a direct constraint on timing of fluid flow in this orogen formed by continental collision. Oxygen isotope ratios of vein minerals are significantly lower than those of the host eclogite, but comparable with those of the regional gneiss. This suggests the veining fluid came from the regional gneiss (i.e. exhumed slab itself) rather than the host eclogite. While zircon U–Pb and phengite Ar–Ar dating yields ages of 214 to 222 Ma for the eclogite and gneiss, the vein gives a quartz–muscovite Rb–Sr isochron age of 181 Ma and a muscovite K–Ar age of 179 Ma. Thus the veining postdates the Triassic ultrahigh pressure metamorphic event, witnessing postcollisional fluid flow after the orogenic cycle of continental collision.  相似文献   

Modeling the seismic response of basin-edge structure by a sequential waveform method     

Lian-Feng Zhao  Wei-Min Wang  Juan Li  Zhen-Xing Yao 《Tectonophysics》2006,420(3-4):493-507

A sequential waveform method is developed to simulate the seismic response of basin-edge structure excited by a plane incident P-wave. The full procedure involves: (a) a previous parameterization of the investigated model using the seismic wave velocities and depths of the sedimentary stratifications; (b) an input motion determined from the records at stations installed on hard rock; (c) forward computation of the P-SV elastic wave field by means of a two-dimensional finite difference (FD) method; (d) the optimization of the model vector using simulated annealing technique and comparing the simulated seismic response of the tested structure with the observed wave field; (e) the correction of the initial model by trial-and-error by testing the differences between synthetics and observed data, and (f) the final solution obtained by iteration using the conjugate gradient algorithm. The search of an optimal basin-edge model has been parallel processed by varying the shapes and velocities of strata on the basis of the fitting of relative timing, amplitude and phase between the output and the observed data. The input motion and sensitivity have been checked and the validity of the method has been demonstrated by numeric analysis. Using the teleseismic records generated by 7 earthquakes recorded at 26 broadband seismic stations, we have studied the seismic velocity structure of the southern edge of the Jiyang depression located in the Bohai Bay basin, northern China. Two cross sections show an agreement between the velocity results and the geological sections available in the region. In addition, we obtain evidence of three hidden faults under the sections and features that suggest major extensions at the Paleogene.  相似文献   

Spectral Simulation and Conditioning to Local Continuity Trends in Geologic Modeling     

Tingting Yao  Craig Calvert  Tom Jones  Glen Bishop  Yuan Ma  Lincoln Foreman 《Mathematical Geology》2006,38(1):51-62

Spectral simulation has gained application in building geologic models due to the advantage of better honoring the spatial continuity of petrophysical properties, such as reservoir porosity and shale volume. Distinct from sequential simulation methods, spectral simulation is a global algorithm in the sense that a global density spectrum is calculated once and the inverse Fourier transform is performed on the Fourier coefficient also only once to generate a simulation realization. The generated realizations honor the spatial continuity structure globally over the whole field instead of only within a search neighborhood, as with sequential simulation algorithms. However, the disadvantage of global spectral simulation is that it traditionally cannot account for the local information such as the local continuity trends, which are often observed in reservoirs and hence are important to be accounted for in geologic models. This disadvantage has limited wider application of spectral simulation in building geologic models. In this paper, we present ways of conditioning geologic models to the relevant local information. To account for the local continuity trends, we first scale different frequency components of the original model with local-amplitude spectrum ratios that are specific to the local trend. The sum of these scaled frequency components renders a new model that displays the desired local continuity trend. The implementation details of this new method are discussed and examples are provided to illustrate the algorithm.  相似文献   

QTPV Data Model and Algorithm and Its Application to Geological Exploration Engineering     

CHENGPenggen SHIWenzhong GONGJianya ZHOUGuoqing 《地球空间信息科学学报》2005,8(1):64-71

3D spatial data model and simulating are the core of 3D GIS can be adopted in different domains. A data model based on Quasi Tri-Prism Volume (QTPV) has been proposed. QTPV definition and its special cases have been discussed. Using QTPV and its special cases, irregular natural geological bodies and regular subsurface engineering can be described efficiently. The proposed model is composed of five primitives and six objects. Data structures and topological relationship of the fives primitives and three objects describing stratigraphy are designed in detail Some schemes are designed for the QTPV modelling of stratigraphy and subsurface engineering according to modelling data. The model manipulation method of QTPV cutting by an arbitrary plane is discussed. Using VC 6.0 programming language integrated with SQL database and OpenGL graphic library under windows environment, a system prototype 3DGeoMV has been developed. The experiment result shows that the QTPV model is feasible and efficient in modelling subsurface engineering.  相似文献   

中国大陆科学钻探（CCSD）主孔地区岩石圈热结构   总被引：11，自引：2，他引：11  

吴耀  金振民  欧新功  徐海军  王璐 《岩石学报》2005,21(2):439-450

岩石圈热结构是指地球内部热量在壳幔的配分比例、温度以及热导率和生热率等热学参数在岩石圈中的分布特征。岩石圈的热结构直接影响着岩石的物理性质和流变学性质,同时还控制了化学反应的类型和速度,从而制约着岩石圈的发展和演化。本文在前人CCSD主孔岩石主、微量元素研究基础上,利用Rybach生热率公式计算了钻孔岩石的放射性生热率,并结合岩石热导率的测定研究了CCSD主孔100-2000m岩石的热结构和主孔榴辉岩在不同退变质程度下生热率、热导率的变化:钻孔中岩石的平均生热率为0.95μWm-3,平均热导率为2.96mWm-1K-1。,其中片麻岩生热率高迭1.01-1.7μWm-3,热导率为2.76-2.96mWm-1K-1;基性超基性岩石生热率最低(<0.21μWm-3),热导率则高达3.20mWm-1K-1以上;新鲜榴辉岩生热率、热导率居中,分剐为0.16-0.44μWm-3和3.31-3.85mWm-1K-1。钻孔中榴辉岩生热率、热导率变化主要受岩性控制:从新鲜榴辉岩到完全退变榴辉岩,热导率总体上降低,但从强退变榴辉岩到完全退变榴辉岩,岩石热导率升高;而在此过程中岩石生热率总体上升高,仅当从中等退变质榴辉岩退变为强退变质榴辉岩时,岩石生热率出现降低趋势。在综合研究的基础上预测CCSD主孔5000m深度处温度为139℃,温度范围为131-151℃。根据区域深部地球物理探测成果对CCSD主孔地区岩石圈热结构进行了研究:上地壳底部温度为256℃,中地壳底部温度为492℃,Moho面温度为683℃,岩石圈底部温度为1185℃,来自地幔的热流为44.1mWm-2,对地表热流的贡献率为58%。研究结果表明,由岩石物理方法获得的CCSD主孔地区岩石圈地温曲线与石榴石-二辉橄榄岩包体推断的中国东部地温曲线十分吻合,本文从实验岩石物理学角度为CCSD主孔地区岩石圈热结构研究提供了重要约束  相似文献   

How Far Is Too Far? – A Statistical Approach to Context‐contingent Proximity Modeling     

Xiaobai Yao  Jean-Claude Thill 《Transactions in GIS》2005,9(2):157-178

Proximity is a fundamental concept in any comprehensive ontology of space ( Worboys 2001 ). The provision of a context‐contingent translation mechanism between linguistic proximity measures (e.g. “near”, “far”) and metric distance measures is an important topic in current GIS research. After a discussion of context factors that mediate the relationship between linguistic and metric distance measures, we present a statistical approach, Ordered Logit Regression, to the context‐contingent proximity modeling. The approach can predict proximity given the corresponding metric distance and context variables. An empirical case study with human subjects is carried out using this statistical approach. Interpretation and predictive accuracy of the empirical case study are discussed.  相似文献   

MODIS数据在乌鲁木齐地区植被景观动态监测中的应用   总被引：2，自引：0，他引：2  

李聪肖继东  宫恒瑞石玉 冯志敏 《沙漠与绿洲气象(新疆气象)》2005,28(3):27-29

根据EOS／MODIS卫星时次高覆盖面广的特征，选取从4．10月的MODIS晴空资料，对整个乌鲁木齐地区植被景观进行动态监测，利用植被指数最大合成法制作了每月植被指数专题图。为了能够结合物候更好地分析乌鲁木齐地区植被随季节变化趋势以及不同时期植被生长状况，我们还制作了植被景观专题图及其变化评价图。评价图的优势在于能直观地反映植被变化的趋势，并能将变化的程度数字化，还可以根据不同的评价图叠加DEM做相应的分析。为乌鲁木齐地区植被变化研究提供有效的依据。  相似文献   

人造热带气旋垂直结构问题初探   总被引：1，自引：1，他引：1       下载免费PDF全文

龚龑  陆维松 《气象科学》2005,25(5):459-464

在人造热带气旋中引入了倾斜垂直结构，并将其用于西折后9806号热带气旋登陆路径的数值模拟。结果表明：应用该方案所得到的模拟结果优于应用正压结构的人造热带气旋方案的模拟结果要准确。因此，此类热带气旋的预报中，其初始涡旋可采用倾斜垂直结构，从而提出改进热带气旋初始涡旋的一种新思路。若对其作进一步研究、推广，则具有广阔的业务应用前景。  相似文献   

青藏高原近地层通量特征的合成分析   总被引：17，自引：0，他引：17  

李国平  段廷扬  巩远发  卢会国 《气象学报》2002,60(4):453-460

利用中日亚洲季风机制合作研究计划 ,设置在青藏高原东部地区的拉萨、日喀则、那曲和林芝 4地 1993年 7月～ 1999年 3月近 7a的自动气象站 (AWS)近地层梯度观测资料 ,确定出分季节的高原地表粗糙度和逐日的地面总体输送系数 ,以此为基础用总体输送公式对地面动量、感热和潜热通量进行了计算 ,并用合成方法分析了 1993～1999年高原近地层通量夏季、冬季的日变化和月变化特征  相似文献