A Practical Measurement Strategy to Estimate Nonlinear Chlorinated Solvent Sorption in Low foc Sediments     

Guohui Wang  Richelle M. Allen‐King  Sungwook Choung  Stanley Feenstra  Robert Watson  Michael Kominek 《Ground Water Monitoring & Remediation》2013,33(1):87-96

In this study, we tested a practical strategy useful for accurate chlorinated volatile organic compound (cVOC) sorption prediction. Corresponding to the feature of the superposition of adsorption due to thermally altered carbonaceous matter (TACM) with organic carbon‐water partitioning, a nonlinear Freundlich sorption isotherm covering a wide range of aqueous concentrations was defined by equilibrium sorption measurement at one or a few low concentration points with extrapolation to the empirical organic carbon‐water partition coefficient (K_oc,e) near compound solubility. We applied this approach to obtain perchloroethene equilibrium sorption isotherm parameters for TACM‐containing glacial sand and gravel subsoil samples from a field site in New York. Sorption and associated K_oc,c applicable to low (5–500 µg/L) and high (>100,000 µg/L) aqueous concentrations were determined in batch experiments. (The K_oc,c is the organic carbon‐normalized sorption partition coefficient corresponding to aqueous concentration C_w.) The K_oc,c measurements at low concentration (~5 µg/L) were 6 to 34 times greater than the K_oc,e. The importance of this type of data is illustrated through presentation of its substantial impact on the site remedy. In so doing, we provide an approach that is broadly applicable to cVOC field sites with similar circumstances (low carbon content glacial sand and gravel with TACM).  相似文献   

The future of the western Baltic Sea: two possible scenarios     

Ulf Gräwe  René Friedland  Hans Burchard 《Ocean Dynamics》2013,63(8):901-921

Globally coupled climate models are generally capable of reproducing the observed trends in the globally averaged atmospheric temperature. However, the global models do not perform as well on regional scales. Here, we present results from four 100-year, high-resolution ocean model experiments (resolution less than 1 km) for the western Baltic Sea. The forcing is taken from a regional atmospheric model and a regional ocean model, imbedded into two global greenhouse gas emission scenarios, A1B and B1, for the period of 2000 to 2100 with each two realisations. Two control runs from 1960 to 2000 are used for validation. For both scenarios, the results show a warming with an increase of 0.5–2.5 K at the sea surface and 0.7–2.8 K below 40 m. The simulations further indicate a decrease in salinity by 1.5–2 practical salinity units. The increase in water temperature leads to a prolongation of heat waves based on present-day thresholds. This amounts to a doubling or even tripling of the heat wave duration. The simulations show a decrease in inflow events (barotropic/baroclinic), which will affect the deepwater generation and ventilation of the central Baltic Sea. The high spatial resolution allows us to diagnose the inflow events and the mechanism that will cause future changes. The reduction in barotropic inflow events correlates well with the increase in westerly winds. The changes in the baroclinic inflows can be consistently explained by the reduction of calm wind periods and thus a weakening of the necessary stratification in the western Baltic Sea and the Danish Straits.  相似文献   

Stochastic subspace identification for output‐only modal analysis: application to super high‐rise tower under abnormal loading condition     

Yi‐Cheng Liu  Chin‐Hsiung Loh  Yi‐Qing Ni 《地震工程与结构动力学》2013,42(4):477-498

The objective of this paper is to develop an online system parameter estimation technique from the response measurements through using the recursive covariance‐driven stochastic subspace identification (SSI‐COV) approach. In developing the recursive SSI‐COV, to avoid time‐consumption of singular value decomposition in recursive SSI, the extended instrumental variable version of the projection approximation subspace tracking method is used in SSI‐COV. Besides, to reduce the effect of noise on the results of identification, the preprocessing of data using recursive singular spectrum analysis technique is also presented to remove the noise contaminant measurements to enhance the stability of data analysis. On the basis of the proposed method, both the ambient vibration and seismic response data of a tower (Canton Tower) are used to observe the time‐varying system natural frequencies of a tower from its operating condition. Results from using off‐line SSI‐COV method under normal operating condition are also presented. Comparison on the identified time‐varying dynamic characteristics of the tower under normal operating condition and earthquake response of distanced earthquake event is discussed. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

A frequency response function change method for damage localization and quantification in a shear building under ground excitation     

Ting‐Yu Hsu  Chin‐Hsiung Loh 《地震工程与结构动力学》2013,42(5):653-668

A frequency response function change (FRFC) method to detect damage location and extent based on the change in the frequency response functions of a shear building under the effects of ground excitation was proposed in this paper. The damage identification equation was derived from the motion equations of the system before and after the occurrence of the damage. Efforts to make the FRFC method less model‐dependent were made. Intact system matrices, which could be estimated using the measured data without the need for an analytical model, and the frequency response functions were required for the FRFC method. The effects of measurement noise and model parameter error in the FRFC method were studied numerically. The proposed FRFC method was validated by experimental studies of a six‐story steel building structure with single and multiple damage cases. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Application of singular spectrum analysis to identify the degrading structure using deteriorating distributed element model     

Chin‐Hsiung Loh  Jung‐Huan Li  Shu‐Hsien Chao 《地震工程与结构动力学》2013,42(5):743-761

Reinforced concrete structure may exhibit significant inelastic hysteretic behavior when subject to strong earthquake excitation. To investigate such an inelastic behavior, in this study, a new system identification technique is applied by using the deteriorating distributed element (DDE) model to simulate the hysteretic behavior of a degrading structure. Through the advanced signal processing technique, the multiple singular spectrum analysis (SSA) and the nonlinear SSA, the recorded inelastic restoring force of a deteriorating structure can be decomposed into several independent additive components in its sequentially degrading order and with decreasing weight. With each decomposed hysteresis loop, the model parameters of the DDE model are identified. The evolutionary properties of the progressive stiffness degradation behavior of reinforced concrete structure can be observed from the identified model parameters. Finally, comparison on the physical properties of the identified DDE model with respect to the seismic response data of the deteriorating structure is also discussed. The result shows that the proposed identification technique can have a good estimation on the seismic behavior of the degrading structure. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Earthquake response analyses of a full‐scale five‐story steel frame equipped with two types of dampers     

Yi‐Jer Yu  Keh‐Chyuan Tsai  Chao‐Hsien Li  Yuan‐Tao Weng  Ching‐Yi Tsai 《地震工程与结构动力学》2013,42(9):1301-1320

The seismic performance tests of a full‐scale five‐story passively controlled steel building were conducted on the E‐Defense shaking table in Japan in March 2009. Before the tests, a blind prediction contest was held to allow researchers and practitioners from all over the world to construct analytical models and predict the dynamic responses of the steel frame specimen equipped with buckling‐restrained braces (BRBs) or viscous dampers (VDs). This paper presents the details of two refined prediction models made and results obtained before the tests. When the proposed analytical modeling techniques are adopted as in the two refined prediction models, the overall prediction accuracy is about 90%. Sensitivity studies conducted after the tests are also presented in this paper. The effects of varying each modeling feature on the response simulation accuracy have been investigated. The analytical results suggest that considering concrete full‐composite actions for beam members could improve prediction accuracy by about 20% against using the simplified bare steel beam model. Adopting refined BRB stiffness computed from incorporating finite‐element gusset stiffness only improves the overall prediction accuracy by 0.9%. Considering the BRB dynamic loading test results for analytical BRB strength reduces the error by 1.9%. For the VD frame, incorporating the brace and VD stiffness could improve the overall prediction accuracy by about 15%. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Seismic response of steel structures with seesaw systems using viscoelastic dampers     

Jae‐Do Kang  Hiroshi Tagawa 《地震工程与结构动力学》2013,42(5):779-794

Vibration control systems are being used increasingly worldwide to provide enhanced seismic protection for new and retrofitted buildings. This paper presents a new vibration control system on the basis of a seesaw mechanism with viscoelastic dampers. The proposed vibration control system comprises three parts: brace, seesaw member, and viscoelastic dampers. In this system, only tensile force appears in bracing members. Consequently, the brace buckling problem is negligible, which enables the use of steel rods for bracing members. By introducing pre‐tension in rods, long steel rods are applicable as bracing between the seesaw members and the moment frame connections over some stories. Seesaw mechanisms can magnify the damper deformation according to the damper system configuration. In this paper, first, the magnification factor, that is, the ratio of the damper deformation to the story drift, is delivered, which includes the rod deformation. Results of a case study demonstrate that the magnification factor of the proposed system is greater than unity for some cases. Seismic response analysis is conducted for steel moment frames with the proposed vibration control system. Energy dissipation characteristics are examined using the time‐history response results of energy. The maximum story drift angle distributions and time‐history response results of displacement show that the proposed system can reduce the seismic response of the frames effectively. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Residual drift demands in moment‐resisting steel frames subjected to narrow‐band earthquake ground motions     

Edén Bojórquez  Jorge Ruiz‐García 《地震工程与结构动力学》2013,42(11):1583-1598

This paper presents the main results of the evaluation of residual inter‐story drift demands in typical moment‐resisting steel buildings designed accordingly to the Mexican design practice when subjected to narrow‐band earthquake ground motions. Analytical 2D‐framed models representative of the study‐case buildings were subjected to a set of 30 narrow‐band earthquake ground motions recorded on stations placed in soft‐soil sites of Mexico City, where most significant structural damage was found in buildings as a consequence of the 1985 Michoacan earthquake, and scaled to reach several levels of intensity to perform incremental dynamic analyses. Thus, results were statistically processed to obtain hazard curves of peak (maximum) and residual drift demands for each frame model. It is shown that the study‐case frames might exhibit maximum residual inter‐story drift demands in excess of 0.5%, which is perceptible for building's occupants and could cause human discomfort, for a mean annual rate of exceedance associated to peak inter‐story drift demands of about 3%, which is the limiting drift to avoid collapse prescribed in the 2004 Mexico City Seismic Design Provisions. The influence of a member's post‐yield stiffness ratio and material overstrength in the evaluation of maximum residual inter‐story drift demands is also discussed. Finally, this study introduces response transformation factors, T_p, that allow establishing residual drift limits compatible with the same mean annual rate of exceedance of peak inter‐story drift limits for future seismic design/evaluation criteria that take into account both drift demands for assessing a building's seismic performance. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Shake table testing and numerical simulation of a self‐centering energy dissipative braced frame     

Jeffrey Erochko  Constantin Christopoulos  Robert Tremblay  Hyung‐Joon Kim 《地震工程与结构动力学》2013,42(11):1617-1635

The self‐centering energy dissipative (SCED) brace is a new steel bracing member that provides both damping to the structure and a re‐centering capability. The goal of this study was to confirm the behavior of SCED braces within complete structural systems and to confirm the ability to model these systems with both a state‐of‐the‐art computer model as well as a simplified model that would be useful to practicing engineers. To these ends, a three‐story SCED‐braced frame was designed and constructed for testing on a shake table. Two concurrent computer models of the entire frame were constructed: one using the opensees nonlinear dynamic modeling software, and a simplified model using the commercial structural analysis software sap2000 . The frame specimen was subjected to 12 significant earthquakes without any adjustment or modification between the tests. The SCED braces prevented residual drifts in the frame, as designed, and did not show any significant degradation due to wear. Both numerical models were able to predict the drifts, story shears, and column forces well. Peak story accelerations were overestimated in the models; this effect was found to be caused by the absence of transitions at stiffness changes in the hysteretic model of the braces. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献   

Evaluation of the response modification coefficient and collapse potential of special concentrically braced frames   总被引：1，自引：0，他引：1  

Po‐Chien Hsiao  Dawn E. Lehman  Charles W. Roeder 《地震工程与结构动力学》2013,42(10):1547-1564

Special concentrically braced frames (SCBFs) are commonly used for seismic design of buildings. Their large elastic stiffness and strength efficiently sustains the seismic demands during smaller, more frequent earthquakes. During large, infrequent earthquakes, SCBFs exhibit highly nonlinear behavior due to brace buckling and yielding and the inelastic behavior induced by secondary deformation of the framing system. These response modes reduce the system demands relative to an elastic system without supplemental damping using a response modification coefficient, commonly termed the R factor. More recently, procedures put forth in FEMAP695 have been made to quantify the R factor through a formalized procedure that accounts for collapse potential. The primary objective of the research in this paper was to evaluate the approach for SCBFs. An improved model for SCBFs that permits simulation of brace fracture was used to conduct response history analyses. A series of three‐story, nine‐story and 20‐story SCBFs were designed and evaluated. Initially, the FEMAP695 method was conducted to estimate collapse and the corresponding R factor. An alternate procedure for scaling the multiple acceleration records to the seismic design hazard was also evaluated. The results show significant variation between the two methods. Of the three variations of buildings studied, the largest vulnerability was identified for the three‐story building. To achieve a consistent margin of safety against collapse, a significantly lower R factor is required for the low‐rise SCBFs (three‐story), whereas the mid‐rise and high‐rise SCBFs (nine‐story and 20‐story) may continue to use the current value of 6, as provided in ASCE‐07. Copyright © 2013 John Wiley & Sons, Ltd.  相似文献