Interference of Multiple Strip Footings on Sand Using Small Scale Model Tests   总被引：2，自引：1，他引：1  

Jyant Kumar  Manas Kumar Bhoi 《Geotechnical and Geological Engineering》2008,26(4):469-477

By using small scale model tests, the interference effect on the vertical load-deformation behavior of a number of equally spaced strip footings, placed on the surface of dry sand, was investigated. At any stage, all the footings were assumed to (i) carry exactly equal magnitude of load, and (ii) settle to the same extent. No tilt of the footing was permitted. The effect of clear spacing (s) among footings on the results was explored. A new experimental setup was proposed in which only one footing needs to be employed rather than a number of footings. The bearing capacity increases continuously with decrease in spacing among the footings. The interference effect becomes further prominent with increase in soil friction angle. In contrast to an increase in the bearing capacity, with decrease in spacing of footings, an increase in the footing settlement associated with the ultimate state of shear failure was observed. The present experimental observations were similar to those predicted by the available theory, based on the method of characteristics. As compared to the theory, the present experimental data, however, indicates much greater effect of interference especially for larger spacing among footings.  相似文献   

Analysis of the 2003 Varunawat Landslide,Uttarkashi, India using Earth Observation data     

K. Vinod kumar  R. C. Lakhera  Tapas R. Martha  R. S. Chatterjee  A. Bhattacharya 《Environmental Geology》2008,55(4):789-799

Mass movements such as landslides in mountainous terrains are natural degradation processes and one of the most important landscape-building factors. Varunawat Parbat overlooking Uttarkashi town witnessed a series of landslides on 23 September 2003 and the debris slides and rock falls continued for 2 weeks. This landslide complex was triggered due to the incessant rainfall prior to the event, and its occurrence led to the blockage of the pilgrim route to Gangotri (source of the Ganges river) and evacuation of thousands of people to safer places. Though there was no loss of lives due to timely evacuation, heavy losses to the property were reported. High-resolution stereoscopic earth observation data were acquired after the incidence to study the landslide in detail with emphasis on the cause of the landslide and mode of failure. Areas along the road and below the Varunawat foothill region are mapped for landslide risk. It was found that the foothill region of the Varunawat Parbat was highly disturbed by man-made activities and houses are dangerously located below steep slopes. The potential zones for landslides along with the existing active and old landslides are mapped. These areas are critical and their treatment with priority is required in order to minimise further landslide occurrences.  相似文献   

Finite Element Modeling of Swelling Soil Pressures Using Joint/Interface Elements     

Ahmet Şenol  Mustafa Aytekin 《Geotechnical and Geological Engineering》2008,26(3):313-321

There could be some discontinuities in a soil media such as layers, earth structures, cracks, and fissures so that estimation of stresses and deformations in these types of soil masses are somewhat different from continuous masses. The discontinuities in a soil mass could be considered as a special link between two blocks. Transmitted swelling pressures affected by the soil properties of the backfill especially at the interface between the backfill and retaining wall. In order to estimate the transmitted swelling pressure distribution behind a retaining wall, using with interface element, a new finite element model and a code (SWELPRES) have been developed. To evaluate the effect of backfill characteristics and interface element from the transmitted lateral swelling pressures, four cases of thickness of backfills with or without interface elements are investigated.  相似文献   

Monitoring Large-Scale Tests for Nuclear Waste Disposal     

Eduardo E. Alonso  Sarah M. Springman  Charles W. W. Ng 《Geotechnical and Geological Engineering》2008,26(6):817-826

Two large-scale “in situ” demonstration experiments and their instrumentation are described. The first test (FEBEX Experiment) involves the hydration of a compacted bentonite barrier under the combined effect of an inner source of heat and an outer water flow from the confining saturated granite rock. In the second case, the progressive de-saturation of Opalinus clay induced by maintained ventilation of an unlined tunnel is analyzed. The paper shows the performance of different sensors (capacitive cells, psychrometers, TDR’s) and a comparison of fill behaviour with modelling results. The long term performance of some instruments could also be evaluated specially in the case of FEBEX test. Capacitive sensors provide relative humidity data during long transient periods characterised by very large variations of suction within the bentonite.  相似文献   

Identification of chlorite and chlorite-related minerals in sediments     

H. W. van der Marel 《Contributions to Mineralogy and Petrology》1964,9(5):462-480

A scheme is presented for the identification and classification of chlorite and related minerals in sediments which is mainly based on X-ray characteristics of the orginal sample and the sample heated at 350°C and treated with K⁺ and with glycerol. Examples are given. It is emphasized that additional data about clay mineral genesis, electron microscopy, infrared spectroscopy and chemical analyses are needed for the ordening of a certain mineral in the proposed scheme. Many names of minerals so far found to occur in the clay separate of sediments proved to be synonymous (52 of a total of 88) and thus should be abandoned. They only give confusion and needlessly increase the many difficulties which already exist in the identification, classification and quantitative determination of this complicated group of minerals of about 36 well defined specimens which may be found in sediments.  相似文献   

An optimized method for automated analysis of algal pigments by HPLC   总被引：3，自引：0，他引：3  

M.A. van Leeuwe  L.A. Villerius  J. Roggeveld  R.J.W. Visser  J. Stefels 《Marine Chemistry》2006,102(3-4):267-275

A recent development in algal pigment analysis by high-performance liquid chromatography (HPLC) is the application of automation. An optimization of a complete sampling and analysis protocol applied specifically in automation has not yet been performed. In this paper we show that automation can only be successful if the various methodological aspects of the sampling and analysis protocol are considered in coherence. We introduce an optimized protocol that involves freeze-drying of the sample, subsequent extraction in 90% acetone and the application of water-packing during analysis. The method was evaluated on both natural plankton populations and a broad spectrum of microalgal cultures: Thalassiosira weisflogii (Bacillariophyceae), Emiliania huxleyi (Prymnesiophyceae), Phaeocystis globosa and Phaeocystis antarctica (Prymnesiophyceae) and Pyramimonas sp. (Prasinophyceae). Whereas pigment extracts were unstable in methanol, with recorded chlorophyll a losses from 10% to 60% per day, pigment degradation rates in acetone were generally less than 1% over 18 h storage in the autosampler (4 °C). In addition, it was found that the extraction efficiency of acetone significantly increased upon freeze-drying prior to extraction. Increases as high as 50–60% were measured in P. antarctica. The application of water-packing of the sample during injection resulted in improved peak shape and peak separation, without diluting the pigment concentrations. Automation is especially beneficial for application in the field, when mixed algal assemblages and low biomass put a high demand on the sensitivity as well as reproducibility of the method.  相似文献   

Constraining the origin and evolution of confined turbidite systems: southern Cretan margin,Eastern Mediterranean Sea (34°30–36°N)     

Tiago M. Alves  Vasilios Lykousis  Dimitris Sakellariou  Stamatina Alexandri  Paraskevi Nomikou 《Geo-Marine Letters》2007,27(1):41-61

Bathymetric, 9.5-kHz long-range sidescan sonar (OKEAN), seismic reflection and sediment-core data are used in the analysis of two tectonic troughs south of Crete, Eastern Mediterranean Sea. Here, up to 1.2 s two-way travel time (TWTT) of strata have accumulated since the Middle Miocene in association with extension in the South Aegean region. The study area comprises >100-km- long by >25-km-wide basins filled by sediments subdivided into two seismic units: (1) an upper Unit 1 deposited in sub-basins which follow the present-day configuration of the southern Cretan margin; (2) a basal Unit 2, more than 500 ms (TWTT) thick, accumulated in deeper half-graben/grabens distinct from the present-day depocentres. Both units overlap a locally stratified Unit 3 comprising the pre-Neogene core complex of Crete and Gavdos. In this work, the interpreted seismic units are correlated with the onshore stratigraphy, demonstrating that denudation processes occurring on Crete and Gavdos in response to major tectonic events have been responsible for high sedimentation rates along the proximal southern Cretan margin. Consequently, topographically confined sedimentary units have been deposited south of Crete in the last 12 Ma, including turbidites and other mass-flow deposits fed by evolving transverse and axial channel systems. Surface processes controlling facies distribution include the direct inflow of sediment from alluvial-fan systems and incising mountain rivers onto the Cretan slope, where significant sediment instability processes occur at present. In this setting, seismic profiles reveal eight different types of stratigraphic contacts on basin-margin highs, and basinal areas show evidence of halokinesis and/or fluid escape. The acquired data also show that significant changes to the margin’s configuration occurred in association with the post-Alpine tectonic and eustatic episodes affecting the Eastern Mediterranean.  相似文献   

A quantitative evaluation of the impact of beam trawling on benthic fauna in the southern North Sea     

Piet  G. J.; Rijnsdorp  A. D.; Bergman  M. J. N.; van Santbrink  J. W.; Craeymeersch  J.; Buijs  J. 《ICES Journal of Marine Science》2000,57(5):1332-1339

  相似文献   

A new method for the generation of second-order random waves     

Peter Jan van Leeuwen  Gert Klopman 《Ocean Engineering》1996,23(2):167-192

In order to prevent the generation of spurious free sub- and superharmonics of random waves in a laboratory channel, the control signal for the wave board has to be derived according to a higher-order wave theory. An expression for this control signal has been derived with the perturbation method of multiple scales. It is much less complex and requires less computation time than the expressions obtained from the full second-order theory. The new method for second-order subharmonics was verified experimentally for waves with bichromatic and continuous first-order spectra. The data were analysed with the complex-harmonic principal-component analysis to reduce the influence of noise.  相似文献   

Measurement of the redox speciation of iron in seawater by catalytic cathodic stripping voltammetry     

Martha Gledhill  Constant M. G. van den Berg 《Marine Chemistry》1995,50(1-4)

Catalytic cathodic stripping voltammetry (CSV) preceded by adsorptive collection of complexes of 1-nitroso-2-napthol (NN) can be used to determine iron in seawater. It is shown here that iron(II) is effectively masked in the presence of 2,2-dipyridyl (Dp) so that iron(III) is measured selectively. The concentration of iron(II) is then calculated as the difference between the concentrations of reactive iron (Fe_R) in the absence and presence of 2 μM Dp, Fe_R being defined as that which was complexed by 20 μM NN at pH 6.9 in the presence of 1.8 mM H₂O₂ and 5 ppm sodium dodecyl sulphate. A 30 min reaction time was allowed for Dp to react with iron(II) in seawater prior to the determination of reactive iron(III) using the same conditions as used for Fe_R. Detection limits of 0.08 nM, 0.077 nM and 0.12 nM were obtained for Fe_R, iron(III) and iron(II), respectively, using a 60 s deposition time.The method was utilised to determine the redox speciation of iron in the northern North Sea. Concentrations of Fe_R ranged between 0.8 and 3.5 nM with nutrient-like depth profiles. Iron(II) was found to be present at concentrations up to 1.2 nM, the highest concentrations occurring in the upper 20 m of the water column.  相似文献