Laboratory experiments and thermal calculations for the development of a next-generation glacier-ice exploration system: Development of an electro-thermal drilling device     

Yuko Suto  Sosuke Saito  Ken-ichi Osada  Hiroshi Takahashi  Hideaki Motoyama  Yoshiyuki Fujii  Yoichi Tanaka 《Polar Science》2008,2(1):15-26

A next-generation drilling system, equipped with a thermal drilling device, is proposed for glacier ice. The system is designed to penetrate glacier ice via melting of the ice and continuously analyze melt-water in a contamination-free sonde. This new type of drilling system is expected to provide analysis data in less time and at less cost than existing systems. Because of the limited number of parameters that can be measured, the proposed system will not take the place of conventional drilling systems that are used to obtain ice cores; however, it will provide a useful method for quickly and simply investigating glacier ice.An electro-thermal drilling device is one of the most important elements needed to develop the proposed system. To estimate the thermal supply required to reach a target depth in a reasonable time, laboratory experiments were conducted using ice blocks and a small sonde equipped solely with heaters. Thermal calculations were then performed under a limited range of conditions. The experiments were undertaken to investigate the effects of the shape and material of the drill head and heater temperature on the rate of penetration into the ice. Additional thermal calculations were then performed based on the experimental results.According to the simple thermal calculations, if the thermal loss that occurs while heat is transferred from the heater to ice (in melting the ice) is assumed to be 50%, the total thermal supply required for heaters in the sonde and cable is as follows: (i) 4.8 kW (sonde) plus 0 W (cable) to penetrate to 300 m depth over 10 days into temperate glacier ice for which the temperature is 0 °C at all depths and to maintain a water layer along 300 m of cable; (ii) 10 kW (sonde) plus 19–32 kW (cable) to penetrate to 1000 m depth over 1 month into cold glacier ice for which the temperature is −25 °C at the surface and 0 °C at 1000 m depth and to maintain a water layer along 1000 m of cable; and (iii) 19 kW (sonde) plus 140–235 kW (cable) to penetrate to 3000 m depth over 2 months into an ice sheet for which the temperature is −55 °C at the surface and 0 °C at 3000 m depth and to maintain a water layer along 3000 m of cable. The thermal supply required for the cable is strongly affected by the thickness of the water layer, cable diameter, and the horizontal distance from the ice wall at which the ice temperature was maintained at its initial temperature. A large thermal supply is required to heat 3000 m of cable in an ice sheet (scenario (iii) above), but penetration into glacier ice (scenarios (i) and (ii) above) could be realistic with the use of a currently employed generator.  相似文献   

Distribution of nitrous oxide dissolved in water masses in the eastern subtropical North Pacific and its origin inferred from isotopomer analysis     

Ayako Fujii  Sakae Toyoda  Osamu Yoshida  Shuichi Watanabe  Ken’ichi Sasaki  Naohiro Yoshida 《Journal of Oceanography》2013,69(2):147-157

N₂O concentration and its isotopomer ratios were measured over a wide area from San Diego to Honolulu in the eastern subtropical North Pacific (ESNP). Waters in the study area had an N₂O maximum (38.2–50.5 nmol kg^?1) at 600–1000 m depth, which is similar to the profiles obtained previously in other areas in the North Pacific. We separated the seawater into five water masses (two for the surface layer, two for the middle layer, and one for the deep layer) and deduced N₂O production–consumption mechanisms in each water body by use of N₂O isotopomer ratios. The results showed that the mechanisms differ slightly among water masses. In the “coastal” surface layer, N₂O is produced by nitrification (NH₂OH oxidation). In the “open ocean” surface layer, it is produced mainly by nitrifier denitrification and to a lesser extent by nitrification under substrate-limited conditions. In both “upwelling” and “open ocean” middle layers it is produced mainly by denitrification and to a lesser extent by nitrifier denitrification. It is also partly reduced. In the deep layer, it is produced predominantly by denitrification with partial reduction. In this way, isotopomers aid elucidation of production–consumption mechanisms of N₂O in the sea even though the mechanisms cannot always be ascertained.  相似文献   

Estimating the impact parameters of cosmic dust particles using a piezoelectric lead zirconate titanate detector     

S. Takechi  T. Miyachi  M. Fujii  N. Hasebe  K. Nogami  H. Ohashi  S. Sasaki  H. Shibata  T. Iwai  E. Grün  R. Srama  N. Okada 《Journal of Atmospheric and Solar》2009,71(2):191-193

A cosmic dust detector for installation on a satellite is currently being developed using piezoelectric lead zirconate titanate (PZT), which can possess both functions of the collector and the transducer. The characteristics of the PZT detector have been studied by bombarding it with hypervelocity particles supplied by a Van de Graaff accelerator. The front surface of the detector used in this study was covered with a white paint to reduce any increase in the temperature due to the solar radiation. There was a linear relationship between the rise time of the signal produced by the detector and the particle's velocities, which were above 10 km/s on impact. This implies that individual particle velocities on impact can be inferred through the empirical formula derived from the data obtained from the PZT detector.  相似文献   

Ecological variations in diatom assemblages in the Paleo-Kathmandu Lake linked with global and Indian monsoon climate changes for the last 600,000 years     

Tatsuya Hayashi  Yoshihiro Tanimura  Yoshihiro Kuwahara  Masao Ohno  Mami Mampuku  Rie Fujii  Harutaka Sakai  Toshiro Yamanaka  Takeshi Maki  Masao Uchida  Wataru Yahagi  Hideo Sakai 《Quaternary Research》2009,72(3):377-387

Variations in fossil diatom assemblages and their relationship with global and Indian monsoon climate changes for the last 600,000 yr were investigated using a core of ancient lake (Paleo-Kathmandu Lake) sediments drilled at the Kathmandu Basin, Nepal Himalaya. Chronological scales of the core were constructed by tuning pollen wet and dry index records to the SPECMAP δ¹⁸O stack record. Examinations of biogenic silica contents and fossil diatom assemblages revealed that variations in productivity and compositions of diatom assemblages were closely linked with global and Indian monsoon climate changes on glacial and interglacial time scales. When summer monsoonal rainfall increased during interglacials (interstadials), diatom productivity increased because of increased inputs of terrestrial nutrients into the lake. When summer monsoonal rainfall reduced and/or winter monsoonal aridification enhanced during glacials (stadials), productivity of the diatoms decreased and lake-level falling brought about changes in compositions of diatom assemblages. Monospecific assemblages by unique Cyclotella kathmanduensis and Puncticulata versiformis appeared during about 590 to 390 ka. This might be attributed to evolutionary fine-tuning of diatom assemblages to specific lake environmental conditions. Additionally, low-amplitude precessional variations in monsoon climate and less lake-level changes may have also allowed both species to dominate over the long periods.  相似文献   

Fifteen years progress of the TRITON array in the Western Pacific and Eastern Indian Oceans     

Kentaro Ando  Yoshifumi Kuroda  Yosuke Fujii  Tatsuya Fukuda  Takuya Hasegawa  Takanori Horii  Yasuhisa Ishihara  Yuji Kashino  Yukio Masumoto  Keisuke Mizuno  Motoki Nagura  Iwao Ueki 《Journal of Oceanography》2017,73(4):403-426

The Triangle Trans‐Ocean Buoy Network (TRITON) project by the Japan Agency for Marine-Earth Science and Technology began with deployment in the western tropical Pacific Ocean in 1998 and has shifted to steady, long-term observations since 1999. After on-site inter-comparison with the Autonomous Temperature Line Acquisition System mooring system of the Tropical Atmosphere and Ocean (TAO) array by the National Oceanic and Atmospheric Administration, the TRITON array became the international TAO/TRITON array in 2000 as a key component of the Global Ocean and Climate Observing Systems. The TAO/TRITON array took over from the TAO array, which was developed during the Tropical Ocean and Global Atmosphere program (1985–1994), and replaced the western part of TAO with new additional real-time measurements of salinity and ocean currents. In 2001, two TRITON moorings were deployed in the eastern Indian Ocean for capturing the eastern pole of the Indian Ocean Dipole. From this initiative, the Indian Ocean Observing System (IndOOS) was designed, and the Indian Ocean mooring array (Research Moored Array for Africa–Asian–Australian Monsoon Analysis and Prediction) was developed as a key component of IndOOS. In this paper, 15 years of progress in the TRITON project in the western Pacific and eastern Indian Oceans is reviewed with regards to scientific outcomes, technological development, and collaborations with international and domestic partners. Future directions for sustainable observation in the Pacific and Indian Oceans are also discussed.  相似文献   

A compact representation of spatio-temporal slip distribution on a rupturing fault     

Hiroshi?TakenakaEmail author  Yushiro?Fujii 《Journal of Seismology》2008,12(2):281-293

We propose a mathematical representation to qualitatively describe the spatio-temporal slip evolution during earthquake rupture in an efficient and easy-to-use manner for numerical simulations of strong ground motion. It is based on three basis functions and associated expansion coefficients. It is an extension of the approach of Ide and Takeo, (J Geophys Res, 102:27379–27391, 1997). We compare our approach and theirs using simple kinematic source models to illustrate differences between the two approaches, and show that our approach more accurately represents the spatio-temporal slip evolution. We also propose a technique based on our representation for extracting a spatio-temporal slip velocity function from a kinematic source model obtained by the conventional source inversion. We then demonstrate the feasibility of our procedure with application to an inverted source model of the 26 March 1997 Northwestern Kagoshima, Japan, earthquake (M _W6.1). In the simulations for actual earthquakes, source models obtained from kinematic source inversions are commonly employed. Our scheme could be used as an interpolation method of slip time functions from relatively coarse finite-source models obtained by conventional kinematic source inversions.  相似文献   

The location and size of a solar hard X-ray burst on September 27, 1969     

T. Takakura  K. Ohki  N. Shibuya  M. Fujii  M. Matsuoka  S. Miyamoto  J. Nishimura  M. Oda  Y. Ogawara  S. Ota 《Solar physics》1971,16(2):454-464

The location and size of a solar impulsive hard X-ray burst have been determined in one dimension to a considerable precision with a balloon-borne X-ray modulation collimator. The center of the X-ray source is on the line passing through the center of a big H flare region of 3 arc min. The size of the X-ray source is remarkably smaller and may be one arc min or less.  相似文献   

Submarine flank eruption preceding caldera subsidence during the 2000 eruption of Miyakejima Volcano, Japan     

Takayuki Kaneko  Atsushi Yasuda  Taketo Shimano  Setsuya Nakada  Toshitsugu Fujii  Toshihiko Kanazawa  Azusa Nishizawa  Yoshihiro Matsumoto 《Bulletin of Volcanology》2005,67(3):243-253

During the early part of a seismic swarm preceding eruption and caldera formation at Miyakejima Volcano, discoloured sea surfaces were observed 1.5 km off the western coast of Miyakejima on 27 June 2000. A later survey of the area using a multi-beam side scan sonar and a remotely operated small submarine revealed four craters of 20–30 m diameter aligned east-west in a 100×10–30 m area on the seafloor, with hot water at 140°C being released from one of the centres. Each crater consists of submarine spatter overlain in part by scoria lapilli. Dredged spatter from the craters was fresh, and there was no evidence of activity of marine organisms on the spatter surface, indicating that the discoloured sea surface resulted from magmatic eruption on the seafloor. This eruption occurred when a westward-propagating seismic swarm, initiated beneath Miyakejimas summit, passed through the area. Finding new magma on the seafloor demonstrates that this seismic swarm was associated with intruding magma, moving outward from beneath Miyakejima. Submarine spatter shows flattened shapes with a brittle crust formed by cooling in water, and its composition is aphyric andesite of 54 wt% SiO₂. The spatter is similar in whole rock and mineral composition to spatter erupted in 1983. However, the wide range of Cl in melt inclusions in plagioclase of the 27 June submarine spatter shows that it is not simply a remnant of the 1983 magma, which has only high Cl melt inclusions in plagioclase. The mixed character of melt inclusions suggests involvement of a magma with low Cl melt inclusions. The magma erupted explosively on 18 August from Miyakejimas summit, considered as the second juvenile magma in this eruption, contains low Cl melt inclusions in plagioclase. Based on these observations and the eruption sequence, we present the following model: (1) A shallow magma chamber was filled with a remnant of 1983 magma that had evolved to a composition of 54–55 wt% SiO₂. (2) Injection of the 18 August magma into this chamber generated a mixed magma having a wide range of Cl in melt inclusions contained plagioclase. The magma mixing might have occurred shortly before the submarine eruption and could have been a trigger for the initiation of the removal of magma from the chamber as an extensive dyke, which eventually led to caldera subsidence.Editorial responsibility: S Nakada, T Druitt  相似文献   

Simulated biogeochemical responses to iron enrichments in three high nutrient, low chlorophyll (HNLC) regions   总被引：1，自引：0，他引：1  

Masahiko Fujii  Naoki Yoshie  Yasuhiro Yamanaka  Fei Chai 《Progress in Oceanography》2005,64(2-4):307

To fill temporal gaps in iron-enrichment experimental data and gain further understanding of marine ecosystem responses to iron enrichments, we apply a fifteen-compartment ecosystem model to three iron-enrichment sites, namely SEEDS (the Subarctic Pacific Iron Experiment for Ecosystem Dynamics Study; 48.5°N, 165°E) in the western North Pacific, SOIREE (the Southern Ocean Iron RElease Experiment; 61°S, 140°E) in the Southern Ocean, and IronExII (the second mesoscale iron enrichment experiment; 3.5°S, 104°W) in the Equatorial Pacific. The ecological effects of iron in the model are represented by changing two photosynthetic parameters during the iron-enrichment period. The model results successfully reproduce the observed biogeochemical responses inside and outside the iron patch at each site, such as rapid increases in plankton biomass and biological productivity, and decreases in surface nutrients and pCO₂, inside the patch. However, the modeled timing and magnitude of changes differ among the sites because of differences in both physical environments and plankton species. After the iron enrichment, the diatom productivity is strongly controlled by light at SOIREE and by silicate at IronExII and SEEDS. Light limitation due to self-shading by the phytoplankton is significant during the bloom at all sites. Sensitivity analysis of the model results to duration of the iron enrichment reveals that long-term multiple infusions over more than a week would not be effective at SEEDS because of strong silicate limitation on diatom growth. Sensitivity of the model to water temperature shows that export production is higher at lower temperatures, because of slower recycling of particulate organic carbon. Therefore, the e-ratio (the ratio of export production to primary production) is inversely correlated with temperature, and the relationship can be described with a linear function. Through this study, we conclude that ecosystem modeling is a powerful tool to help design future iron-enrichment experiments and observational plans.  相似文献   

Ocean Data Assimilation in the Tropical Pacific: A Short Survey     

Masafumi Kamachi  Yosuke Fujii  Xiaobing Zhou 《Journal of Oceanography》2002,58(1):45-55

This short survey presents several research and operational developments of ocean data assimilation in the tropical Pacific, primarily for climate-scale phenomena. Aspects of theoretical error estimations, diagnostics and practical reduced space techniques are also briefly reported. This revised version was published online in August 2006 with corrections to the Cover Date.  相似文献