Modern Wyoming plant and pronghorn isoscapes and their implications for archaeology     

Jack N. Fenner  Carol D. Frost 《Journal of Geochemical Exploration》2009,102(3):149

Stable isotope ratios obtained from pronghorn teeth recovered from archaeological sites in southwestern Wyoming may provide information on past climate and hunter behavior. However, the interpretation of archaeological isotope values depends on pronghorn isotopic correlations with the environment and geography. To investigate these correlations, a series of modern Wyoming carbon, oxygen and strontium isoscapes are compared with recent temperature, humidity and geological variation. Results indicate that both pronghorn and sagebrush carbon, and to a lesser degree oxygen, isotope ratios are tied to relative humidity. Temperature is correlated with oxygen isotope ratios in sagebrush, but not pronghorn. Strontium isotope ratios in both sagebrush and pronghorn vary with geography, which in turn reflects variation in geology.  相似文献   

Estimating black hole masses in quasars using broad optical and UV emission lines     

Paola Marziani  Jack W. Sulentic 《New Astronomy Reviews》2012,56(2-3):49-63

We review past work using broad emission lines as virial estimators of black hole masses in quasars. Basically one requires estimates of the emitting region radius and virial velocity dispersion to obtain black hole masses. The three major ways to estimate the broad-line emitting region (BLR) radius involve: (1) direct reverberation mapping, (2) derivation of BLR radius for larger samples using the radius-luminosity correlation derived from reverberation measures, and (3) estimates of BLR radius using the definition of the ionization parameter solved for BLR radius (photoionization method). At low redshift (z ? 0.7) FWHM Hβ serves as the most widely used estimator of virial velocity dispersion. FWHM Hβ can provide estimates for tens of thousands of quasars out to z ≈ 3.8 (IR spectroscopy beyond z ≈ 1). A new photoionization method also shows promise for providing many reasonable estimates of BLR radius via high S/N IR spectroscopy of the UV region 1300–2000 Å. FWHM Mgiiλ2800 can serve as a surrogate for FWHM Hβ in the range 0.4 ? z ? 6.5 while civλ1549 is affected by broadening due to non-virial motions and best avoided (i.e. there is no clear conversion factor between FWHM Hβ and FWHM Civλ1549). Most quasars yield mass estimates in the range 7 ? log M_BH ? 9.7. There is no strong evidence for values above 10.0 and there may be evidence for a turnover in the maximum black hole mass near z ≈ 5.  相似文献   

Atlas of quartz sand surface textures | D.H. Krinsley and J.C. Doornkamp, 1973. Cambridge University Press,London, 91 pp., £ 6.60     

Jack E. Gillott 《Earth》1974,10(3):235-236

  相似文献   

The mobilization and deposition of mud deposits in a coastal plain estuary     

Jack Blanton  Clark Alexander  Merryl Alber  Gail Kineke   《Limnologica》1999,29(3):293

Muddy sediments with their potential for containing contaminants are commonly deposited and remobilized by tidal currents in estuarine environments. We examined the mobilization and subsequent redeposition of mud in a coastal plain estuary located in the southeastern United States. Time-series data for salinity, suspended sediment concentrations and quality (percent organic matter and pigment concentrations) were obtained over a 13-hour tidal cycle. We found that fast-settling mud particles are found during the highest tidal current speeds. Particle quality analyses suggest that all the material is of similar origin, and that phaeopigment can be used as a tracer of particles in this system. These particles settle onto the bed when current speeds approach slack conditions. We speculate that the quantity of mud mobilized during neap tide is less than during spring tide resulting in an opportunity for the mud to partially consolidate on the bottom and be removed from resuspension. We further speculate that the muddy sediments are mainly derived from fringing marshes in this estuary.  相似文献   

Adaptive numerical simulation of the remediation of soil contamination by in‐situ gas venting     

S.V. Pennington  P.K. Jimack  K. McFarlane 《Computational Geosciences》1999,3(2):135-160

This paper describes a mathematical model and adaptive numerical simulation of the time‐dependent multiphase, multicomponent flow which occurs when a gas venting process is used to remove a volatile contaminant from a porous medium. The numerical simulation is adaptive in both space and time and involves the use of a finite element spatial discretization and the SPRINT2D software [6] for time integration. Results are presented which demonstrate the high quality of the simulation, both in terms of the length scales of the features that are resolved and the efficiency of the solutions relative to those obtained on fixed grids. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Systematic winds at heights between 350 and 675 km from analysis of the orbits of four balloon satellites     

Jack W. Slowey 《Planetary and Space Science》1975,23(5):879-886

Six values of the rate of rotation of the Earth's upper atmosphere have been obtained by analysis of the orbital inclinations of four balloon satellites in the intervals just before the final decay of their orbits. The effective heights of these results range from about 350 to about 675 km. The values themselves range from 0·8 to 1·4 times the Earth's rotation and correspond to zonal wind speeds between 100 m/sec westward and 200 m/sec eastward. All the results correspond to fairly specific local times and are consistent with a diurnal wind pattern in low latitudes having a strong eastward maximum near local midnight and a lesser westward maximum near 10:00 LT. They argue against the contention of a sharp decrease in the rate with respect to that of the Earth, which is supposed to begin at about 360 km. The factors involved in the determination of these values and the method used are discussed in considerable detail.  相似文献   

Data Analysis and Modeling to Optimize Thermal Treatment Cost and Performance          下载免费PDF全文

Jack C. Parker  Ungtae Kim  Alyson Fortune  Steffen Griepke  James P. Galligan  Amber Bonarrigo 《Ground Water Monitoring & Remediation》2017,37(1):51-66

The objective of in situ thermal treatment is typically to reduce the contaminant mass or average soil concentration below a specified value. Evaluation of whether the objective has been met is usually made by averaging soil concentrations from a limited number of soil samples. Results from several field sites indicate large performance uncertainty using this approach, even when the number of samples is large. We propose a method to estimate average soil concentration by fitting a log normal probability model to thermal mass recovery data. A statistical approach is presented for making termination decisions from mass recovery data, soil sample data, or both for an entire treatment volume or for subregions that explicitly considers estimation uncertainty which is coupled to a stochastic optimization algorithm to identify monitoring strategies to meet objectives with minimum expected cost. Early termination of heating in regions that reach cleanup targets sooner enables operating costs to be reduced while ensuring a high likelihood of meeting remediation objectives. Results for an example problem demonstrate that significant performance improvement and cost reductions can be achieved using this approach.  相似文献   

A probabilistic framework for estimating the residual drift of idealized SDOF systems of non‐degrading conventional and damped structures          下载免费PDF全文

Jack Wen Wei Guo  Constantin Christopoulos 《地震工程与结构动力学》2018,47(2):479-496

This paper presents a general framework for predicting the residual drift of idealized SDOF systems that can be used to represent non‐degrading structures, including those with supplemental dampers. The framework first uses post‐peak oscillation analysis to predict the maximum ratio of residual displacement to the peak transient displacement in a random sample. Then, residual displacement ratios obtained from nonlinear time‐history analyses using both farfield and near‐fault‐pulse records were examined to identify trends, which were explained using the oscillation mechanics of SDOF systems. It is shown that large errors can result in existing probability models that do not capture the influence of key parameters on the residual displacement. Building on the observations that were made, a general probability distribution for the ratio of residual displacement to the peak transient displacement that more accurately reflects the physical bounds obtained from post‐peak oscillation analysis is proposed for capturing the probabilistic residual displacement response of these systems. The proposed distribution is shown to be more accurate when compared with previously proposed distributions in the literature due to its explicit account of dynamic and damping properties, which have a significant impact on the residual displacement. This study provides a rational basis for further development of a residual drift prediction tool for the performance‐based design and analysis of more complex multi‐degree‐of‐freedom systems.  相似文献   

Using the Newly‐created ILE DBMS to Better Represent Temporal and Historical GIS Data     

Vitit Kantabutra  J. B. “Jack” Owens  Daniel P. Ames  Charles N. Burns  Barbara Stephenson 《Transactions in GIS》2010,14(Z1):39-58

This article introduces a type of DBMS called the Intentionally‐Linked Entities (ILE) DBMS for use as the basis for temporal and historical Geographical Information Systems. ILE represents each entity in a database only once, thereby mostly eliminating redundancy and fragmentation, two major problems in Relational and other database systems. These advantages of ILE are realized by using relationship objects and pointers to implement all of the relationships among data entities in a native fashion using dynamically‐allocated linked data structures. ILE can be considered to be a modern and extended implementation of the E/R data model. ILE also facilitates storage of things that are more faithful to the historical records, such as gazetteer entries of places with imprecisely known or unknown locations. This is difficult in Relational database systems but is a routine task using ILE because ILE is implemented using modern memory allocation techniques. We use the China Historical GIS (CHGIS) and other databases to illustrate the advantages of ILE. This is accomplished by modeling these databases in ILE and comparing them to the existing Relational implementations.  相似文献   

Evaluating new fault-controlled hydrothermal dolomitization models: Insights from the Cambrian Dolomite,Western Canadian Sedimentary Basin     

Ardiansyah Koeshidayatullah  Hilary Corlett  Jack Stacey  Peter K. Swart  Adrian Boyce  Hamish Robertson  Fiona Whitaker  Cathy Hollis 《Sedimentology》2020,67(6):2945-2973

Fault-controlled hydrothermal dolomitization in tectonically complex basins can occur at any depth and from different fluid compositions, including ‘deep-seated’, ‘crustal’ or ‘basinal’ brines. Nevertheless, many studies have failed to identify the actual source of these fluids, resulting in a gap in our knowledge on the likely source of magnesium of hydrothermal dolomitization. With development of new concepts in hydrothermal dolomitization, the study aims in particular to test the hypothesis that dolomitizing fluids were sourced from either seawater, ultramafic carbonation or a mixture between the two by utilizing the Cambrian Mount Whyte Formation as an example. Here, the large-scale dolostone bodies are fabric-destructive with a range of crystal fabrics, including euhedral replacement (RD1) and anhedral replacement (RD2). Since dolomite is cross-cut by low amplitude stylolites, dolomitization is interpreted to have occurred shortly after deposition, at a very shallow depth (<1 km). At this time, there would have been sufficient porosity in the mudstones for extensive dolomitization to occur, and the necessary high heat flows and faulting associated with Cambrian rifting to transfer hot brines into the near surface. While the δ¹⁸O_water and ⁸⁷Sr/⁸⁶Sr ratios values of RD1 are comparable with Cambrian seawater, RD2 shows higher values in both parameters. Therefore, although aspects of the fluid geochemistry are consistent with dolomitization from seawater, very high fluid temperature and salinity could be suggestive of mixing with another, hydrothermal fluid. The very hot temperature, positive Eu anomaly, enriched metal concentrations, and cogenetic relation with quartz could indicate that hot brines were at least partially sourced from ultramafic rocks, potentially as a result of interaction between the underlying Proterozoic serpentinites and CO₂-rich fluids. This study highlights that large-scale hydrothermal dolostone bodies can form at shallow burial depths via mixing during fluid pulses, providing a potential explanation for the mass balance problem often associated with their genesis.  相似文献