Comparison of Numerical and Analytical Liquefaction Analyses of Tailings     

M. James  M. Aubertin 《Geotechnical and Geological Engineering》2017,35(1):277-291

The seismic performance of a tailings impoundment can be adversely affected by the behavior of the retained tailings. However, there remains considerable uncertainty in tailings liquefaction analysis. Twenty cyclic simple shear tests conducted on tailings from a gold mine in Quebec, Canada, were simulated numerically. The simulations indicated that the dynamic behavior of tailings could be modelled reasonably well, except that the weighted cyclic resistance curve of the tailings differed from that of clean sand which was used to develop the constitutive model (UBCSAND). An (N₁)_60-CS value of 10 blows/30 cm was estimated for the tailings based on calibration at a CSR of 0.10 for 15 cycles of loading. Numerical simulation of the behavior of a 20-m-high deposit of tailings during an earthquake (M_w = 5.9) indicated liquefaction of the upper 8 m of tailings. Liquefaction analysis using the Simplified method with published magnitude scaling factors (MSF) did not predict the occurrence of liquefaction. The use of MSF values calculated from the laboratory testing predicted liquefaction in the upper 8 m of tailings, corresponding quite well with the numerical simulation. The results indicate that both analytical and numerical methods can be used to evaluate the potential for tailings liquefaction under seismic loads.  相似文献   

Modeling coastal tsunami hazard from submarine mass failures: effect of slide rheology,experimental validation,and case studies off the US East Coast     

Grilli  Stéphan T.  Shelby  Mike  Kimmoun  Olivier  Dupont  Guillaume  Nicolsky  Dmitry  Ma  Gangfeng  Kirby  James T.  Shi  Fengyan 《Natural Hazards》2017,86(1):353-391

Natural Hazards - We perform numerical simulations to assess how coastal tsunami hazard from submarine mass failures (SMFs) is affected by slide kinematics and rheology. Two types of two-layer SMF...  相似文献   

Characterization of the crust of the Coast Mountains Batholith,British Columbia,from P to S converted seismic waves and petrologic modeling     

Josh A. Calkins  George Zandt  James Girardi  Ken Dueker  George E. Gehrels  Mihai N. Ducea 《Earth and Planetary Science Letters》2010,289(1-2):145-155

The late Triassic to early Tertiary Coast Mountains Batholith (CMB) of British Columbia provides an ideal locale to study the processes whereby accreted terranes and subduction-related melts interact to form stable continental crust of intermediate to felsic composition and complementary ultramafic residuals. Seismic measurements, combined with calculated elastic properties of various CMB rock compositions, provide a window into the deep-crustal lithologies that are key to understanding the processes of continental growth and evolution. We use a combination of seismic observations and petrologic modeling to construct hypothetical crustal sections at representative locations across the CMB, then test the viability of these sections via forward modeling with synthetic seismic data. The compositions that make up our petrologic forward models are based on calculations using the free energy minimization program Perple_X to predict mineral assemblages at depth for the bulk compositions of exposed plutonic rocks collected in the study area. Seismic data were collected along two transects in west-central British Columbia: a southern line that crossed the CMB near the town of Bella Coola (near 52° N), and a northern line centered on the towns of Terrace and Kitimat (near 54° N). Along both transects, seismic receiver functions reveal high V_p/V_s ratios near the Insular/Intermontane terrane boundary and crustal thickness increasing from 26 ± 3 km to 34 ± 3 km (at the 1 sigma certainty level) from west to east across the Coast Shear Zone (CSZ). On the southern line, we observe an anomalous region of complex receiver functions and diminished Moho signals beneath the central portion of the CMB. Our petrologic and seismic profiles show that observed seismic data from much of the CMB can be well-matched in terms of crustal thickness and structure, average V_p/V_s, and amplitude of the Moho converted phase, without including ultramafic residual material in the lower crust.  相似文献   

Magnetostratigraphic correlation of the Oxfordian–Kimmeridgian boundary     

Piotr A. Przybylski  James G. Ogg  Andrzej Wierzbowski  Angela L. Coe  Mark W. Hounslow  John K. Wright  François Atrops  Erik Settles 《Earth and Planetary Science Letters》2010,289(1-2):256-272

A magnetic polarity pattern for Boreal and Sub-Boreal ammonite zones of the Upper Oxfordian to Lower Kimmeridgian was established and confirmed in four British sections, including the proposed Global Boundary Stratotype Section and Point (GSSP) on the Isle of Skye (Scotland) to define the base of the international Kimmeridgian Stage. A coeval pattern for Sub-Mediterranean ammonite zones was compiled from seven sections in Poland, one German section and multi-section composites from France and Spain. The mean paleopole for the European Craton (excluding Spain) at the Oxfordian–Kimmeridgian boundary is 74.2°N, 181.3°E (Α₉₅ = 3.8°). The common magnetic polarity scale enables inter-correlation of ammonite subzones among these three faunal provinces and to the marine magnetic-anomaly M-Sequence. The proposed GSSP at the base of the Pictonia baylei Zone is near the base of an extended interval dominated by reversed polarity, which is interpreted to be Chron M26r. This GSSP level projects to the lower to middle part of the Epipeltoceras bimammatum Subzone, which is the middle subzone of this E. bimammatum Zone in the Sub-Mediterranean standard zonation. In contrast, the traditional placement of the Oxfordian–Kimmeridgian boundary in that Sub-Mediterranean standard zonation (base of Sutneria platynota Zone) is at the base of Chron M25r, or nearly 1 million years younger.  相似文献   

MTBE, TBA, and TAME Attenuation in Diverse Hyporheic Zones     

by James E. Landmeyer  Paul M. Bradley  Donald A. Trego  Kevin G. Hale  Joseph E. Haas II 《Ground water》2010,48(1):30-41

Groundwater contamination by fuel-related compounds such as the fuel oxygenates methyl tert -butyl ether (MTBE), tert -butyl alcohol (TBA), and tert -amyl methyl ether (TAME) presents a significant issue to managers and consumers of groundwater and surface water that receives groundwater discharge. Four sites were investigated on Long Island, New York, characterized by groundwater contaminated with gasoline and fuel oxygenates that ultimately discharge to fresh, brackish, or saline surface water. For each site, contaminated groundwater discharge zones were delineated using pore water geochemistry data from 15 feet (4.5 m) beneath the bottom of the surface water body in the hyporheic zone and seepage-meter tests were conducted to measure discharge rates. These data when combined indicate that MTBE, TBA, and TAME concentrations in groundwater discharge in a 5-foot (1.5-m) thick section of the hyporheic zone were attenuated between 34% and 95%, in contrast to immeasurable attenuation in the shallow aquifer during contaminant transport between 0.1 and 1.5 miles (0.1 to 2.4 km). The attenuation observed in the hyporheic zone occurred primarily by physical processes such as mixing of groundwater and surface water. Biodegradation also occurred as confirmed in laboratory microcosms by the mineralization of U- ¹⁴C-MTBE and U-¹⁴C-TBA to ¹⁴CO₂ and the novel biodegradation of U- ¹⁴C-TAME to ¹⁴CO₂ under oxic and anoxic conditions. The implication of fuel oxygenate attenuation observed in diverse hyporheic zones suggests an assessment of the hyporheic zone attenuation potential (HZAP) merits inclusion as part of site assessment strategies associated with monitored or engineered attenuation.  相似文献   

Antifouling biocides in discarded marine paint particles     

Rachel Parks  Patricia E. Frickers  James W. Readman 《Marine pollution bulletin》2010,60(8):1226-1230

Antifouling paint fragments collected from marinas and leisure boat maintenance facilities and in the vicinity of abandoned boats have been chemically characterised. High concentrations of Cu (23-380 mg g⁻¹) and Zn (14-160 mg g⁻¹) in the samples (n = 14) are consistent with the use of these metals in the principal biocidal and non-biocidal pigments in contemporary antifouling formulations. Up to about 2% and 7% of the respective metals were solvent-extractable, suggesting that organo-forms of Cu and Zn (e.g. pyrithiones) were also present. Of the organic biocides, dichlofluanid was present in most samples and at concentrations up to about 20 mg g⁻¹. Chlorothalonil and Irgarol 1051® were only detected in one and four cases, respectively, and Sea Nine 211® was not detected in any sample. Results are discussed in terms of UK legislation regarding biocide usage and the likely effects and fate of discarded paint particles in coastal environments where boats are repaired or moored.  相似文献   

Earthquake Recurrence in Simulated Fault Systems     

James H. Dieterich  Keith B. Richards-Dinger 《Pure and Applied Geophysics》2010,167(8-9):1087-1104

We employ a computationally efficient fault system earthquake simulator, RSQSim, to explore effects of earthquake nucleation and fault system geometry on earthquake occurrence. The simulations incorporate rate- and state-dependent friction, high-resolution representations of fault systems, and quasi-dynamic rupture propagation. Faults are represented as continuous planar surfaces, surfaces with a random fractal roughness, and discontinuous fractally segmented faults. Simulated earthquake catalogs have up to 10⁶ earthquakes that span a magnitude range from ～M4.5 to M8. The seismicity has strong temporal and spatial clustering in the form of foreshocks and aftershocks and occasional large-earthquake pairs. Fault system geometry plays the primary role in establishing the characteristics of stress evolution that control earthquake recurrence statistics. Empirical density distributions of earthquake recurrence times at a specific point on a fault depend strongly on magnitude and take a variety of complex forms that change with position within the fault system. Because fault system geometry is an observable that greatly impacts recurrence statistics, we propose using fault system earthquake simulators to define the empirical probability density distributions for use in regional assessments of earthquake probabilities.  相似文献   

Aftershock Sequences Modeled with 3-D Stress Heterogeneity and Rate-State Seismicity Equations: Implications for Crustal Stress Estimation     

Deborah Elaine Smith  James H. Dieterich 《Pure and Applied Geophysics》2010,167(8-9):1067-1085

In this paper, we present a model for studying aftershock sequences that integrates Coulomb static stress change analysis, seismicity equations based on rate-state friction nucleation of earthquakes, slip of geometrically complex faults, and fractal-like, spatially heterogeneous models of crustal stress. In addition to modeling instantaneous aftershock seismicity rate patterns with initial clustering on the Coulomb stress increase areas and an approximately 1/t diffusion back to the pre-mainshock background seismicity, the simulations capture previously unmodeled effects. These include production of a significant number of aftershocks in the traditional Coulomb stress shadow zones and temporal changes in aftershock focal mechanism statistics. The occurrence of aftershock stress shadow zones arises from two sources. The first source is spatially heterogeneous initial crustal stress, and the second is slip on geometrically rough faults, which produces localized positive Coulomb stress changes within the traditional stress shadow zones. Temporal changes in simulated aftershock focal mechanisms result in inferred stress rotations that greatly exceed the true stress rotations due to the main shock, even for a moderately strong crust (mean stress 50 MPa) when stress is spatially heterogeneous. This arises from biased sampling of the crustal stress by the synthetic aftershocks due to the non-linear dependence of seismicity rates on stress changes. The model indicates that one cannot use focal mechanism inversion rotations to conclusively demonstrate low crustal strength (≤10 MPa); therefore, studies of crustal strength following a stress perturbation may significantly underestimate the mean crustal stress state for regions with spatially heterogeneous stress.  相似文献   

Accounting for uncertainty in DEMs from repeat topographic surveys: improved sediment budgets   总被引：5，自引：0，他引：5  

Joseph M. Wheaton  James Brasington  Stephen E. Darby  David A. Sear 《地球表面变化过程与地形》2010,35(2):136-156

  相似文献   

A comparison of field- and satellite-derived thermal flux at Piton de la Fournaise: implications for the calculation of lava discharge rate     

D. Coppola  M. R. James  T. Staudacher  C. Cigolini 《Bulletin of Volcanology》2010,72(3):341-356

We present thermal measurements made by high spatial resolution ground-based (a hand-held thermal camera) and low spatial resolution space-based (MODIS) instruments for a lava flow field active during the last phase of the May–July 2003 eruption at Piton de la Fournaise (La Réunion). Multiple oblique ground-based thermal images were merged to provide full coverage of the flow-field. These were then corrected for path length attenuation and orthorectified, allowing the at-surface radiance emitted by the flow-field to be estimated. Comparison with the radiance recorded by the MODIS sensors during the eruption reveals that, for clear-sky conditions and moderate-to-low viewing angles (satellite zenith <40°), the satellite measurements represent ∼90% of the at-surface radiance, and thus represent valuable data for quantifying volcanic thermal anomalies. Nevertheless, extreme viewing geometries and the presence of clouds strongly affect the radiance reaching the sensor and affected data from 94% of the overpasses. Ground-based thermal data were used to investigate an empirical relationship between the radiant heat flux and lava discharge rate during the emplacement of pahoehoe flows. While the average radiation temperature for flow surface that were 6–24 h old ranged between 500 K and 625 K, the ratio between radiative heat flux and Time-Averaged lava Discharge Rate (TADR) ranged between 1.5 × 10⁸ J m⁻³ and 3.5 × 10⁸ J m⁻³. This relationship was used to estimate TADR values from optimal MODIS data and produced results in line with those obtained from GPS surveys (Coppola et al. 2005). Our results underscore the importance of ground-based thermal analysis for the interpretation of satellite measurements, particularly in terms of calculating discharge rate trends.  相似文献