Rivers, chemical weathering and Earth's climate   总被引：4，自引：0，他引：4  

Bernard Dupr  Cline Dessert  Priscia Oliva  Yves Goddris  Jrme Viers  Louis Franois  Romain Millot  Jrme Gaillardet 《Comptes Rendus Geoscience》2003,335(16):1141-1160

We detail the results of recent studies describing and quantifying the large-scale chemical weathering of the main types of continental silicate rocks: granites and basalts. These studies aim at establishing chemical weathering laws for these two lithologies, describing the dependence of chemical weathering on environmental parameters, such as climate and mechanical erosion. As shown within this contribution, such mathematical laws are of primary importance for numerical models calculating the evolution of the partial pressure of atmospheric CO₂ and the Earth climate at geological timescales. The major results can be summarized as follow: (1) weathering of continental basaltic lithologies accounts for about 30% of the total consumption of atmospheric CO₂ through weathering of continental silicate rocks. This is related to their high weatherability (about eight times greater than the granite weatherability); (2) a simple weathering law has been established for basaltic lithologies, giving the consumption of atmospheric CO₂ as a function of regional continental runoff, and mean annual regional temperature; (3) no such simple weathering law can be proposed for granitic lithologies, since the effect of temperature can only be identified for regions displaying high continental runoff; (4) a general law relating mechanical erosion and chemical weathering has been validated on small and large catchments. The consequences of these major advances on the climatic evolution of the Earth are discussed. Particularly, the impacts of the onset of the Deccan trapps and the Himalayan orogeny on the global carbon cycle are reinvestigated. To cite this article: B. Dupré et al., C. R. Geoscience 335 (2003).  相似文献   

Stabilization of Atmospheric Concentrations of Greenhouse Gases     

Jean Koch  Uri Dayan  Shmuel Amir 《Climatic change》2003,57(1-2):227-241

Given the present commitment of the developed countries according to the Kyoto Protocol, most published scenarios demonstrate that global greenhouse gases concentrations would not be stabilized at any level. In order to stabilize these concentrations, a deeper global involvement is needed. Taking Israel as an example of a `recently-developed' country, we assess the role that such countries could play by assuming voluntary commitments in strengthening global involvement. This case as a model may encourage a global scheme for curbing carbon emissions, in which the more developed countries assume a stronger role and the less developed countries participate according to the principle of common but differentiated responsibility. The scheme builds on the inverse relation that exists between the per capita gross domestic product and the rate of increase of emissions due to economic growth. According to this theoretical scheme, the voluntary commitments assumed by the `recently-developed' countries encourage the more developed countries to deepen their involvement by assuming more stringent reductions of emissions at home and transferring technological and financial means to the less developed countries. The proposed scheme would enable non-Annex I countries, both `recently-developed' countries and less developed countries, to participate much earlier in the net mitigation of greenhouse gases.  相似文献   

Retrograde fluids in the Archean Shawmere anorthosite, Kapuskasing Structural Zone, Ontario, Canada     

William M. Lamb  Jean Morrison 《Contributions to Mineralogy and Petrology》1997,129(2-3):105-119

The Archean Shawmere anorthosite lies within the granulite facies portion of the Kapuskasing Structural Zone (KSZ), Ontario, and is crosscut by numerous linear alteration veins containing calcite + quartz ± dolomite ± zoisite ± clinozoisite ± margarite ±paragonite ± chlorite. These veins roughly parallel the trend of the Ivanhoe Lake Cataclastic Zone. Equilibria involving clinozoisite + margarite + quartz ± calcite ± plagioclase show that the vein minerals were stable at T < 600 °C, XCO₂ < 0.4 at P ≈ 6 kbar. The stabilities of margarite and paragonite in equilibrium with quartz are also consistent with T < 600 °C and XCO₂ < 0.4 at 6 kbar. Additional assemblages consisting of calcite + clinochlore + quartz + talc + margarite indicate T < 500 °C with XCO₂ > 0.9. Thus, vein formation, while clearly retrograde, spanned a range of temperatures, and fluid compositions evolved from H₂O-rich to CO₂-rich. The calcite in the retrograde veins has δ¹⁸O values that range from 8.4 to 11.2‰ (average = +9.7 ± 0.9‰) and δ¹³C values that range from −3.9 to −1.6‰ (average = −3.1 ± 0.6‰). These values indicate that the fluids from which calcite precipitated underwent extensive exchange with the anorthosite and other crustal lithologies. The fluids may have been initially derived either from devolatilization of metamorphic rocks or crystallization of igneous rocks in the adjacent Abitibi subprovince. Vein quartz contains CO₂-rich fluid inclusions (final melting T = −57.0 to −58.7 °C) that range in size from 5 to 17 μm. Measured homogenization temperatures (T h) range from −44.0 to 14.5 °C, however for most inclusions (46 of S1), T h = −44.0 to −21.1 °C (ρCO₂ ≈ 1.13 to 1.05 g/cm³). At 400 to 600 °C, these densities correspond to pressures of 3.5 to 7 kbar, which is the best estimate of pressures of vein formation. It has been argued that some high density CO₂-rich fluid inclusions found in the KSZ were formed during peak metamorphism and thus document the presence of a CO₂-rich fluid during peak granulite facies metamorphism (Rudnick et al. 1984). The association of high density CO₂-rich fluid inclusions with clearly retrograde veins documents the formation of similar composition and density inclusions after the peak of metamorphism. Thus, the coincidence of entrapment pressures calculated from fluid inclusion density measurements with peak metamorphic pressures alone should not be considered strong evidence for peak metamorphic inclusion entrapment. All fluid inclusion results are consistent with an initially semi-isobaric retrograde P–T path. Received: 2 April 1996 / Accepted: 15 November 1996  相似文献   

Re-Os Isotopic Measurements at the Femtomole Level in Natural Samples   总被引：17，自引：0，他引：17  

Jean Louis Birck  Matthieu Roy Barman  Françoise Capmas 《Geostandards and Geoanalytical Research》1997,21(1):19-27

Here we describe a new chemical separation method for Os and an improved mass spectrometric procedure for Re and Os. This technique is based on the selective extraction of OsO₄ from aqueous solution in liquid bromine. Among other advantages, this procedure avoids the cumbersome distillation procedure for Os and uses only commercial "off the shelf" PFA teflon labware. Blank levels for 0.5 g sample sizes are: 0.06 pg and 0.5 pg for Os and Re respectively. Samples containing as little as 1 pg g⁻¹ Os can be analysed reliably with this method. Adaptation to other dissolution methods is also discussed.  相似文献   

CURRENT GEOSCIENCE LABORATORIES GEOANALYTICAL PROGRAMS AND THEIR QUALITY ASSURANCE UNDERPINNINGS     

Jean M. RICHARDSON  Peter C. LIGHTFOOT  Hugh de  SOUZA 《Geostandards and Geoanalytical Research》1996,20(1):141-156

  相似文献   

Solar modulation of cosmogenic nuclide production over the last millennium: comparison between C and Be records     

Edouard Bard  Grant M. Raisbeck  Franoise Yiou  Jean Jouzel 《Earth and Planetary Science Letters》1997,150(3-4):453-462

For about the last 30 years it has been recognized that the high frequency component of the tree rings ¹⁴C/¹²C record is dominated by the modulation of the cosmic ray flux by the solar wind. In particular, it has been demonstrated that the three most recent periods of low sunspot occurrence were characterized by high values of atmospheric ¹⁴C/¹²C. During the last millennium other periods of high ¹⁴C/¹²C values were observed but their solar origin is still debatable. In the present work we compare these fluctuations with an independent record of cosmogenic ¹⁰Be measured in ice from the South Pole to check the solar origin of the observed ¹⁴C/¹²C variations. In order to compare quantitatively the results obtained on ¹⁰Be and ¹⁴C, it is necessary to take into account the different behaviour of these two cosmogenic isotopes, and especially the damping effect of the carbon cycle in the case of ¹⁴C. As an input to a 12-box numerical model we used the relative fluctuations of the ¹⁰Be concentrations record measured in South Pole ice and converted it into a synthetic ¹⁴C record. We took into account the fact that ¹⁰Be modulation is enhanced in polar regions due to the orientation of the geomagnetic field. As expected, the fluctuations of the modelled ¹⁴C record are much smaller (a factor of 20) than those observed for the raw ¹⁰Be record. In addition, the variations are smoother and shifted in time by a few decades. The ¹⁰Be-based ¹⁴C variations closely resemble the ¹⁴C measurements obtained on tree rings (R = 0.81). In particular, it is easy to identify periods of maximal ¹⁴C/¹²C which correspond to solar activity minima centred at about 1060, 1320 (Wolf), 1500 (Spörer), 1690 (Maunder) and 1820 (Dalton) yr A.D. Cross-correlation calculations suggest that there is no significant lag between the ¹⁰Be-based ¹⁴C and the tree-ring ¹⁴C records. Our study strongly suggests the dominance of the solar modulation on the cosmonuclide production variations during the last millennium.  相似文献   

Tectonic evolution of the Lachlan Fold Belt, southeastern Australia: constraints from coupled numerical models of crustal deformation and surface erosion driven by subduction of the underlying mantle     

Jean Braun  Cristina Pauselli 《Physics of the Earth and Planetary Interiors》2004,141(4):281-301

We have used a coupled thermo-mechanical finite-element (FE) model of crustal deformation driven by mantle/oceanic subduction to demonstrate that the tectonic evolution of the Lachlan Fold Belt (LFB) during the Mid-Palaeozoic (Late Ordovician to Early Carboniferous) can be linked to continuous subduction along a single subduction zone. This contrasts with most models proposed to date which assume that separate subduction zones were active beneath the western, central and eastern sections of the Lachlan Orogen. We demonstrate how the existing data on the structural, volcanic and erosional evolution of the Lachlan Fold Belt can be accounted for by our model. We focus particularly on the timing of fault movement in the various sectors of the orogen. We demonstrate that the presence of the weak basal decollement on which most of the Lachlan Fold Belt is constructed effectively decouples crustal structures from those in the underlying mantle. The patterns of faulting in the upper crust appears therefore to be controlled by lateral strength contrasts inherited from previous orogenic events rather than the location of one or several subduction zones. The model also predicts that the uplift and deep exhumation of the Wagga-Omeo Metamorphic Belt (WOMB) is associated with the advection of this terrane above the subduction point and is the only tectonic event that gives us direct constraints on the location of the subduction zone. We also discuss the implications of our model for the nature of the basement underlying the present-day orogen.  相似文献   

Pedogenic factors affecting magnetic susceptibility of the last interglacial palaeosol S1 in the Chinese Loess Plateau     

Z.‐D. Feng  H. B. Wang  C. G. Olson 《地球表面变化过程与地形》2004,29(11):1389-1402

The magnetic susceptibility has been used as a quantitative or semi‐quantitative proxy for reconstructing the summer monsoon intensity in the Chinese Loess Plateau based on extensive studies on climatic or/and environmental mechanisms producing the magnetic susceptibility signatures. However, the precise nature of the link between past climates and the susceptibility signatures has remained uncertain primarily due to lack of our understanding in the ?nalizing and preserving processes of the signatures. This paper attempts to examine the reliability or acceptability of this summer monsoon proxy from non‐magnetic perspectives of soil‐forming processes. We chose nine sections along two transects: one across the western part of the Chinese Loess Plateau and another across the eastern part. Several conclusions can be drawn from our analytical data. First, clay translocation within the S1 palaeosol pro?les, as indicated by ?eld‐observed clay coatings on ped faces in Bt and Bk horizons and demonstrated by laboratory‐analysed clay contents, must have moved some of the magnetic minerals downward so that the susceptibility re?ects only the post‐translocation distribution of the magnetic‐susceptibility‐producing minerals. Second, the best‐developed palaeosol S1S3 at most of the sections studied is not expressed by the magnetic susceptibility because this palaeosol developed in underlying coarse loess (L2) and coarse textures tend to lower the susceptibility. Third, carbonate concentration is normally negatively correlated with the magnetic susceptibility or simply suppresses the magnetic susceptibility peak when the susceptibility enhancement exceeds the carbonate dilution effect. To conclude, extreme caution must be observed when using magnetic susceptibility signatures to retrieve high‐resolution records of the last interglacial palaeoclimate in the Chinese Loess Plateau. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

Optimal design of viscoelastic dampers using eigenvalue assignment   总被引：1，自引：0，他引：1  

Sang‐Hyun Lee  Dong‐In Son  Jinkoo Kim  Kyung‐Won Min 《地震工程与结构动力学》2004,33(4):521-542

In this study a procedure for determining the optimum size and location of viscoelastic dampers is proposed using the eigenvalue assignment technique. Natural frequencies and modal damping ratios, required to realize a given target response, are determined first by the convex model. Then the desired dynamic structural properties are realized by optimally distributing the damping and stiffness coefficients of viscoelastic dampers using non‐linear programming based on the gradient of eigenvalues. This optimization method provides information on the optimal location as well as the magnitude of the damper parameters. The proposed procedure is applied to the retrofit of a 10‐story shear frame, and to a three‐dimensional structure with an asymmetric plan. The analysis results confirm that the responses of model structures retrofitted by the proposed method correspond well with the given target response. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Seismic structural control using an electric servomotor active mass driver system     

Chien‐Liang Lee  Yen‐Po Wang 《地震工程与结构动力学》2004,33(6):737-754

This study investigates an electric‐type active mass driver (AMD) system for structural vibration control. Composed primarily of an electric servomotor and a ball screw, the electrical AMD system is free from noise problems, oil leakage, and labor‐intensive maintenance that commonly are associated with hydraulic AMD systems. The desired stroke amplification of the mass and the power demand of the servomotor can be adjusted via the ball screw pitch, which in turn affects the effectiveness and efficiency of the system. Meanwhile, an instantaneous optimal direct output feedback control algorithm is adopted. Numerical simulation is performed using a five‐story steel frame as the object structure under the conditions of the 1940 El Centro earthquake. The AMD system proves to be effective and efficient within a certain range of the ball screw pitch. The reductions of the peak responses can reach as high as 70% if properly designed. Requiring only the velocity measurement of the top floor for on‐line feedback control, the proposed control algorithm is recommended for practical implementation. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献