Can GPS-Derived Surface Loading Bridge a GRACE Mission Gap?     

Roelof Rietbroek  Mathias Fritsche  Christoph Dahle  Sandra-Esther Brunnabend  Madlen Behnisch  Jürgen Kusche  Frank Flechtner  Jens Schröter  Reinhard Dietrich 《Surveys in Geophysics》2014,35(6):1267-1283

We investigated two ‘gap-filler’ methods based on GPS-derived low-degree surface loading variations (GPS-I and GPS-C) and a more simple method (REF-S) which extends a seasonal harmonic variation into the expected Gravity Recovery and Climate Experiment (GRACE) mission gap. We simulated two mission gaps in a reference solution (REF), which is derived from a joint inversion of GRACE (RL05) data, GPS-derived surface loading and simulated ocean bottom pressure. The GPS-I and GPS-C methods both have a new type of constraint applied to mitigate the lack of GPS station network coverage over the ocean. To obtain the GPS-C solution, the GPS-I method is adjusted such that it fits the reference solution better in a 1.5 year overlapping period outside of the gap. As can be expected, the GPS-I and GPS-C solutions contain larger errors compared to the reference solution, which is heavily constrained by GRACE. Within the simulated gaps, the GPS-C solution generally fits the reference solution better compared to the GPS-I method, both in terms of spherical harmonic loading coefficients and in terms of selected basin-averaged hydrological mass variations. Depending on the basin, the RMS-error of the water storage variations (scaled for leakage effects) ranges between 1.6 cm (Yukon) and 15.3 cm (Orinoco). In terms of noise level, the seasonal gap-filler method (REF-S) even outperforms the GPS-I and GPS-C methods, which are still affected by spatial aliasing problems. However, it must be noted that the REF-S method cannot be used beyond the study of simple harmonic seasonal variations.  相似文献   

GEOCHEMICAL RECOGNITION OF SPILLED SEDIMENTS USED IN NUMERICAL MODEL VALIDATION     

JensR.VALEUR SteenLOMHOLT ChristianKNUDSEN 《国际泥沙研究》2004,19(2):83-95

A fixed link (tunnel and bridge, in total 16 km) was constructed between Sweden and Denmark during 1995-2000. As part of the work, approximately 16 million tonnes of seabed materials (limestone and clay till) were dredged, and about 0.6 million tonnes of these were spilled in the water. Modelling of the spreading and sedimentation of the spilled sediments took place as part of the environmental monitoring of the construction activities. In order to verify the results of the numerical modelling of sediment spreading and sedimentation, a new method with the purpose of distinguishing between the spilled sediments and the naturally occurring sediments was developed. Because the spilled sediments tend to accumulate at the seabed in areas with natural sediments of the same size, it is difficult to separate these based purely on the physical properties. The new method is based on the geo-chemical differences between the natural sediment in the area and the spill. The basic propertiesused are the higher content of calcium carbonate material in the spill as compared to the natural sediments and the higher Ca/Sr ratio in the spill compared to shell fragments dominating the natural calcium carbonate deposition in the area. The reason for these differences is that carbonate derived from recent shell debris can be discriminated from Danien limestone, which is the material in which the majority of the dredging took place, on the basis of the Ca/Sr ratio being 488 in Danien Limestone and 237 in shell debris. The geochemical recognition of the origin of the sediments proved useful in separating the spilled from the naturally occurring sediments. Without this separation, validation of the modelling of accumulation of spilled sediments would not have been possible. The method has general validity and can be used in many situations where the origin of a given sediment is sought.  相似文献   

Impact angle influence in high velocity dust collisions during planetesimal formation     

Jens Teiser  Markus Küpper 《Icarus》2011,215(2):596-598

We have examined the influence of impact angle in collisions between small dust aggregates and larger dust targets through laboratory experiments. Targets consisted of μm-sized quartz dust and had a porosity of about 67%; the projectiles, between 1 and 5 mm in diameter, were slightly more compact (64% porosity). The collision velocity was centered at 20 m/s and impact angles range from 0° to 45°. At a given impact angle, the target gained mass for projectiles smaller than a threshold size, which decreases with increasing angle from about 3 mm to 1 mm. The fact that growth is possible up to the largest angles studied supports the idea of planetesimal formation by sweep-up of small dust aggregates.  相似文献   

Assembly and concept of a web-based GIS within the paleolimnological project CONTINENT (Lake Baikal,Russia)     

Birgit Heim  Jens Klump  Hedi Oberhänsli  Nathalie Fagel 《Journal of Paleolimnology》2008,39(4):567-584

Web-based Geographical Information Systems (GIS) are excellent tools within interdisciplinary and multi-national geoscience projects to exchange and visualize project data. The web-based GIS presented in this paper was designed for the paleolimnological project ‘High-resolution CONTINENTal paleoclimate record in Lake Baikal’ (CONTINENT) (Lake Baikal, Siberia, Russia) to allow the interactive handling of spatial data. The GIS database combines project data (core positions, sample positions, thematic maps) with auxiliary spatial data sets that were downloaded from freely available data sources on the world wide web. The reliability of the external data was evaluated and suitable new spatial datasets were processed according to the scientific questions of the project. GIS analysis of the data was used to assist studies on sediment provenance in Lake Baikal, or to help answer questions such as whether the visualization of present-day vegetation distribution and pollen distribution supports the conclusions derived from palynological analyses. The refined geodata are returned back to the scientific community by using online data publication portals. Data were made citeable by assigning persistent identifiers (DOI) and were published through the German National Library for Science and Technology (TIB Hannover, Hannover, Germany).  相似文献   

Wind-driven diversion of summer river runoff preconditions the Laptev Sea coastal polynya hydrography: Evidence from summer-to-winter hydrographic records of 2007–2009     

Igor A. Dmitrenko  Sergey A. Kirillov  Thomas Krumpen  Mikhail Makhotin  E. Povl Abrahamsen  Sascha Willmes  Ekaterina Bloshkina  Jens A. Hölemann  Heidemarie Kassens  Carolyn Wegner 《Continental Shelf Research》2010

This paper examines the role of atmospheric forcing in modifying the pathways of riverine water on the Laptev Sea shelf, using summer-to-winter hydrographic surveys from 2007 to 2009. Over the two consecutive winter seasons of 2007–2008 and 2008–2009 in the area of the winter coastal polynya, our data clearly link winter surface salinity fields to the previous summer conditions, with substantially different winter salinity patterns preconditioned by summer atmospheric forcing. In the summer of 2007, dominant along-shore westerly winds in the cyclonic regime force the Lena River runoff to flow eastward. In contrast, in the summer of 2008, dominant along-shore easterly winds over the East Siberian Sea and on-shore northerly winds over the Laptev Sea in the anticyclonic regime lock the riverine water in the vicinity of the Lena Delta. Over the coastal polynya area in the southeastern Laptev Sea these patterns precondition a surface salinity difference of 8–16 psu between the winters of 2008 and 2009. Overall, this indicates a residence time of at least half a year for riverine water on the Laptev Sea shelf. Future climate change associated with an enhanced summer cyclonicity over the eastern Arctic may turn more riverine water eastward along the eastern Siberian coast, resulting in weaker vertical density stratification over the Laptev Sea shelf, with possible impact on the efficiency of vertical mixing and polynya dense water production.  相似文献   

Meteorology and oceanography of the Atlantic sector of the Southern Ocean—a review of German achievements from the last decade     

Hartmut H. Hellmer  Monika Rhein  Günther Heinemann  Janna Abalichin  Wafa Abouchami  Oliver Baars  Ulrich Cubasch  Klaus Dethloff  Lars Ebner  Eberhard Fahrbach  Martin Frank  Gereon Gollan  Richard J. Greatbatch  Jens Grieger  Vladimir M. Gryanik  Micha Gryschka  Judith Hauck  Mario Hoppema  Oliver Huhn  Torsten Kanzow  Boris P. Koch  Gert König-Langlo  Ulrike Langematz  Gregor C. Leckebusch  Christof Lüpkes  Stephan Paul  Annette Rinke  Bjoern Rost  Michiel Rutgers van der Loeff  Michael Schröder  Gunther Seckmeyer  Torben Stichel  Volker Strass  Ralph Timmermann  Scarlett Trimborn  Uwe Ulbrich  Celia Venchiarutti  Ulrike Wacker  Sascha Willmes  Dieter Wolf-Gladrow 《Ocean Dynamics》2016,66(11):1379-1413

  相似文献   

Getting across information communities     

Patrick Maué  Jens Ortmann 《Earth Science Informatics》2009,2(4):217-233

Amazon’s deforestation affects citizens from varying information communities. Experts like scientists or journalists acquire relevant data on-site and publish valuable information on the Web. But different and sometimes conflicting views on reality impede sharing of information across communities, relevant content remains far too often undiscovered. We introduce rule-based semantic annotations as solution to facilitate the discovery and evaluation of geographical information. With the distinction between shared domain and local information source ontologies, the proposed architecture of a semantically supported SDI for the Amazon also takes the plethora of GI formats into account. Creating semantic annotations is challenging, a recommender system for semantic annotations enables even the non-IT experts to participate. The benefits of the proposed techniques are further illustrated by a scenario which spans across information communities of economics, ecology, and ethnology.  相似文献   

Recurrent mesoproterozoic continental magmatism in South-Central Norway     

Svend Pedersen  Tom Andersen  Jens Konnerup-Madsen  William L. Griffin 《International Journal of Earth Sciences》2009,98(5):1151-1171

We report U–Pb dates and Lu–Hf isotope data, obtained by LAM-ICPMS, for zircons from metamorphic rocks of the Setesdalen valley, situated in the Telemark block south of the classic Telemark region of southern Norway. The samples include infracrustal rocks from the metamorphic basement, metaigneous rocks and metasediments from the Byglandsfjorden supracrustal cover sequence, and metaigneous rocks which intruded the whole succession. The main crustal evolution took place from 1,550–1,020 Ma, beginning with the emplacement of juvenile tonalitic melts; the contribution of older crustal material increased with time. Around 1,320 Ma, further addition of juvenile material occurred, involving both mafic and felsic melts, metamorphism and deformation. Acid magmas with high FeO*/MgO were intruded at 1,215 Ma, coinciding with underplating elsewhere in South Norway. The period starting at 1,215 Ma is represented by supracrustal rocks, principally metarhyolites with minor mafic material and immature sediments of the Byglandsfjorden Group. The crust generation processes ended with the intrusion of diorites and granodiorites at 1,030 Ma, late in the Sveconorwegian orogeny. Regional processes of metamorphism and deformation (around 1,290 and 1,000 Ma) can be related to the assembly of Rodinia. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.  相似文献   

Range imaging: a new method for high‐resolution topographic measurements in small‐ and medium‐scale field sites     

Manuel Nitsche  Jens M. Turowski  Alexandre Badoux  Dieter Rickenmann  Tobias K. Kohoutek  Michael Pauli  James W. Kirchner 《地球表面变化过程与地形》2013,38(8):810-825

Topographic measurements are essential for the study of earth surface processes. Three‐dimensional data have been conventionally obtained through terrestrial laser scanning or photogrammetric methods. However, particularly in steep and rough terrain, high‐resolution field measurements remain challenging and often require new creative approaches. In this paper, range imaging is evaluated as an alternative method for obtaining surface data in such complex environments. Range imaging is an emerging time‐of‐flight technology, using phase shift measurements on a multi‐pixel sensor to generate a distance image of a surface. Its suitability for field measurements has yet not been tested. We found ambient light and surface reflectivity to be the main factors affecting error in distance measurements. Low‐reflectivity surfaces and strong illumination contrasts under direct exposure to sunlight lead to noisy distance measurements. However, regardless of lighting conditions, the accuracy of range imaging was markedly improved by averaging multiple images of the same scene. For medium ambient lighting (shade) and a light‐coloured surface the measurement uncertainty was approximately 9 mm. To further test the suitability of range imaging for field applications we measured a reach of a steep mountain stream with a horizontal resolution of approximately 1 cm (in the focal plane of the camera), allowing for the interpolation of a digital elevation model on a 2 cm grid. Comparison with an elevation model obtained from terrestrial laser scanning for the same site revealed that both models show similar degrees of topographic detail. Despite limitations in measurement range and accuracy, particularly at bright ambient lighting, range imaging offers three‐dimensional data in real time and video mode without the need of post‐processing. Therefore, range imaging is a useful complement or alternative to existing methods for high‐resolution measurements in small‐ to medium‐scale field sites. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献   

Using snakes for the registration of topographic road database objects to ALS features     

Jens Göpfert  Franz Rottensteiner  Christian Heipke 《ISPRS Journal of Photogrammetry and Remote Sensing》2011,66(6):858-871

For historical reasons many national mapping agencies store their topographic data in a dual system consisting of a Digital Landscape Model (DLM) and a Digital Terrain Model (DTM). The DLM contains 2D vector data representing objects on the Earth’s surface, such as roads and rivers, whereas the DTM is a 2.5D representation of the related height information, often acquired by Airborne Laser Scanning (ALS). Today, many applications require reliable 3D topographic data. Therefore, it is advantageous to convert the dual system into a 3D DLM. However, as a result of different methods of acquisition, processing, and modelling, the registration of the two data sets often presents difficulties. Thus, a straightforward integration of the DTM and DLM might lead to inaccurate and semantically incorrect 3D objects.In this paper we propose a new method for the fusion of the two data sets that exploits parametric active contours (also called snakes), focusing on road networks. For that purpose, the roads from a DLM initialise the snakes, defining their topology and their internal energy, whereas ALS features exert external forces to the snake via the image energy. After the optimisation process the shape and position of the snakes should coincide with the ALS features. With respect to the robustness of the method several known modifications of snakes are combined in a consistent framework for DLM road network adaptation. One important modification redefines the standard internal energy and thus the geometrical model of the snake in order to prevent changes in shape or position not caused by significant features in the image energy. For this purpose, the initial shape is utilized creating template-like snakes with the ability of local adaptation. This is one crucial point towards the applicability of the entire method considering the strongly varying significance of the ALS features. Other concepts related to snakes are integrated which enable our method to model network and ribbon-like characteristics simultaneously. Additionally, besides ALS road features information about context objects, such as bridges and buildings, is introduced as part of the image energy to support the optimisation process. Meaningful examples are presented that emphasize and evaluate the applicability of the proposed method.  相似文献