Palaeoenvironmental significance of Late Permian palaeosols in the South‐Eastern Iberian Ranges,Spain     

RAÚL DE LA HORRA  Ma ISABEL BENITO  JOSE LÓPEZ‐GÓMEZ  ALFREDO ARCHE  JOSÉ F. BARRENECHEA  JAVIER LUQUE 《Sedimentology》2008,55(6):1849-1873

The Late Permian (Wuchiapingian) Alcotas Formation in the SE Iberian Ranges consists of one red alluvial succession where abundant soil profiles developed. Detailed petrographical and sedimentological studies in seven sections of the Alcotas Formation allow six different types of palaeosols, with distinctive characteristics and different palaeogeographical distribution, to be distinguished throughout the South‐eastern Iberian Basin. These characteristics are, in turn, related to topographic, climatic and tectonic controls. The vertical distribution of the palaeosols is used to differentiate the formation in three parts from bottom to top showing both drastic and gradual vertical upwards palaeoenvironmental changes in the sections. Reconstruction of palaeoenvironmental conditions based on palaeosols provides evidence for understanding the events that occurred during the Late Permian, some few millions of years before the well‐known Permian‐Triassic global crisis.  相似文献   

Methane‐related microbial gypsum calcitization in stromatolites of a marine evaporative setting (Münder Formation,Upper Jurassic,Hils Syncline,north Germany)     

GERNOT ARP  CHRISTIAN OSTERTAG‐HENNING  SELÇÜK YÜCEKENT  JOACHIM REITNER  VOLKER THIEL 《Sedimentology》2008,55(5):1227-1251

Fossil stromatolites may reveal information about their hydrochemical palaeoenvironment, provided that assignment to a specific microbial community and a corresponding biogeochemical mechanism of formation can be made. Tithonian stromatolites of the Münder Formation at Thüste, north Germany, have traditionally been considered as formed by intertidal cyanobacterial communities. However, thin sections of the stromatolites show elongated angular traces of former gypsum crystals in a dense arrangement, but no algal or cyanobacterial filament traces. Moreover, high Fe²⁺ and Mn²⁺ contents, oxygen‐isotope and sulphur‐isotope ratios of carbonate‐bound sulphates, and sulphurized hydrocarbon biomarkers of the stromatolitic carbonate indicate that CaCO₃ precipitation occurred near the oxic–anoxic interface as a result of intensive bacterial sulphur cycling rather than photosynthetic activity. Furthermore, anaerobic oxidation of methane by Archaea may have driven CaCO₃ precipitation in deeper parts of the biofilm community, as reflected by high concentrations of squalane with a strongly negative δ¹³C in conjunction with evaporite pseudomorphs showing extremely low δ¹³C_Carb ratios. Consequently, the Thüste stromatolites are now interpreted as having initially formed by gypsum impregnation of biofilms. Subsequently, early Mg‐calcitic calcitization within the biofilms occurred because of combined bacterial iron, manganese and sulphate reduction, with an increasing contribution of anaerobic oxidation of methane with depth. This model plausibly explains the prominent preservation of signals derived from oxygen‐independent metabolic pathways, whereas virtually no geochemical record exists for an aerobic community that may, nevertheless, have prevailed at the stromatolite surface. Photic‐zone stromatolites with a prominent signal of anaerobic oxidation of methane may be common in, and indicative of, oxygen‐depleted sulphate‐bearing environments with high rates of methane production, conditions that possibly were fulfilled at the Archaean to Proterozoic transition.  相似文献   

纺织品中偶氮染料还原液内芳香胺的电喷雾电离质谱分析   总被引：3，自引：1，他引：2  

吴转璋  丁健桦  赖劲虎  陈焕文 《岩矿测试》2008,27(4):250-254

在优化的条件下,用电喷雾电离质谱(ESI-MS)检测了多种纺织品中由偶氮染料还原获得的芳香胺。当毛细管温度为100℃、鞘气流速为25单位、进样流速为10μL/min、电压为5kV时,信号的总离子流强度高且较稳定。实验分析了19种致癌芳香胺标准溶液的二级质谱,获得了相应物质的特征碎片离子;在此基础上,建立了基于ESI-MS对毛巾、棉布等样品中芳香胺进行快速定性分析的方法,具有灵敏度高、特异性好、检测速度快等优点。  相似文献   

软玉子料的形状规律及其应用   总被引：2，自引：1，他引：1  

李平  李凌丽 《岩矿测试》2008,27(5):395-396

通过对软玉子料形状总结,发现子料多呈扁平状,其长宽比较小,磨圆好的子料形状可分为11类。这些特征可用于子料鉴别与特殊材料制作。  相似文献   

大型敞流坳陷湖盆浅水三角洲与湖盆中心砂体的形成与分布   总被引：34，自引：0，他引：34  

邹才能  赵文智  张兴阳  罗平  王岚  刘柳红  薛叔浩  袁选俊  朱如凯  陶士振 《地质学报》2008,82(6):813-825

大型敞流坳陷湖盆浅水三角洲及湖盆中心砂体已成为中国陆相盆地岩性油气藏最重要的勘探目标。通过对现代典型湖盆浅水三角洲的深入分析,结合我国中、新生代大型坳陷湖盆浅水三角洲及湖盆中心砂体的地质研究,取得以下主要进展与认识：①在分析浅水三角洲形成地质背景的基础上,按照供源体系、湖水深度及三角洲前缘倾斜坡度将湖盆三角洲分为9种成因结构类型;②建立了毯式浅水曲流河三角洲的沉积模式,指出末端分流河道及末端决口扇是浅水曲流河三角洲的典型微相类型;③分析了浅水三角洲砂体大面积分布的形成条件,指出敞流湖盆是湖盆中心浅水三角洲砂体发育的重要条件,敞流通道对湖盆中心砂体分布有重要控制作用;④湖盆中心发育河流、三角洲、湖流及密度底流砂体等牵引流成因砂体,也发育洪水浊积扇及滑塌浊积扇等重力流成因砂体;⑤大型浅水三角洲体系三级层序界面对岩性（成岩）圈闭的发育有重要控制作用,三角洲平原带层序界面上覆叠置砂体富集岩性油气藏,勘探潜力大。本文研究成果希对坳陷湖盆沉积学研究及岩性油气藏勘探能有推动作用。  相似文献   

煤岩对压裂裂缝长期导流能力影响的实验研究   总被引：7，自引：0，他引：7  

张士诚  牟善波  张劲  王雷 《地质学报》2008,82(10):1444-1449

煤层中一般都伴有煤层气,通过压裂可以将煤层气释放出来,一方面能够获得清洁能源,另一方面可以提高煤田的安全开采。煤岩层自身特点决定了其在压裂中应用的实验评价方法及结论应具有特殊性,本文主要针对煤层气井的煤岩层压裂裂缝长期导流能力进行实验评价研究。实验表明,与砂岩地层不同,煤岩的硬度较小,压裂中支撑剂嵌入情况较严重;煤岩易破碎,碎屑颗粒充填到支撑剂中;同时支撑剂存在破碎及吸附伤害等,多种作用导致支撑裂缝的导流能力降低。实验中,以煤岩层闭合压力为一个重要的参数,实验对比分析了在不同闭合压力下,铺砂浓度、支撑剂粒径、支撑剂种类及组合的选择、支撑剂颗粒的破碎与嵌入、压裂液残渣等因素对煤岩层导流能力的影响。本文的实验结论为,嵌入对煤岩层支撑裂缝的导流能力伤害很大,加大铺砂浓度、采用低破碎率支撑剂、降低压裂液伤害能在一定程度上提高煤层裂缝的导流能力,但影响程度随闭合压力的增加而逐渐降低。本文所得出的结论对今后煤层气的开发及设计施工具有一定的指导意义。  相似文献   

Distribution of Cd,Pb, Zn and Cu and their chemical speciations in soils from a peri-smelter area in northeast China   总被引：2，自引：0，他引：2  

Ping Du  Nandong Xue  Li Liu  Fasheng Li 《Environmental Geology》2008,55(1):205-213

An exploratory study on soil contamination of heavy metals was carried out surrounding Huludao zinc smelter in Liaoning province, China. The distribution of total heavy metals and their chemical speciations were investigated. The correlations between heavy metal speciations and soil pH values in corresponding sites were also analyzed. In general, Cd, Zn, Pb, Cu and As presented a significant contamination in the area near the smelter, comparied with Environmental Quality Standards for Soils in China. The geoaccumulation index showed the degree of contamination: Cd > Zn > Pb > Cu > As. There was no obvious pollution of Cr and Ni in the studied area. The speciation analysis showed that the dominant fraction of Cd and Zn was the acid soluble fraction, and the second was the residual fraction. Pb was mostly associated with the residual fraction, which constituted more than 50% of total concentration in all samples. Cu in residual fraction accounted for a high percentage (40–80%) of total concentration, and the proportion of Cu in the oxidizable fraction is higher than that of other metals. The distribution pattern of Pb and Zn was obviously affected by soil pH. It seemed that Pb and Zn content in acid solution fraction increased with increasing soil pH values, while Cd content in acid soluble fraction accounted for more proportion in neutral and alkaline groups than acidic one. The fraction distribution patterns of Cu in three pH groups were very similar and independent of soil pH values. And the residual fraction of Cu took a predominant part (50%) of the total content.  相似文献   

Assessment of frozen-ground conditions for engineering geology along the Qinghai–Tibet highway and railway, China     

Huijun Jin  Zhi Wei  Shaoling Wang  Qihao Yu  Lanzhi Lü  Qingbai Wu  Yanjun Ji 《Engineering Geology》2008,101(3-4):96-109

The Qinghai–Tibet Highway and Railway (the Corridor) across the Qinghai–Tibet Plateau traverses 670 km of permafrost and seasonally frozen-ground in the interior of the Plateau, which is sensitive to climatic and anthropogenic environmental changes. The frozen-ground conditions for engineering geology along the Corridor is complicated by the variability in the near-surface lithology, and the mosaic presence of warm permafrost and talik in a periglacial environment. Differential settlement is the major frost-effect problem encountered over permafrost areas. The traditional classification of frozen ground based on the areal distribution of permafrost is too generalized for engineering purposes and a more refined classification is necessary for engineering design and construction. A proposed classification of 51 zones, sub-zones, and sections of frozen ground has been widely adopted for the design and construction of foundations in the portion of the Corridor studied. The mean annual ground temperature (MAGT), near-surface soil types and moisture content, and active faults and topography are most commonly the primary controlling factors in this classification. However, other factors, such as local microreliefs, drainage conditions, and snow and vegetation covers also exert important influences on the features of frozen ground. About 60% of the total length of the Corridor studied possesses reasonably good frozen-ground conditions, which do not need special mitigative measures for frost hazards. However, other sections, such as warm and ice-rich or -saturated permafrost, particularly in the sections in wetlands, ground improvement measures such as elevated land bridges and passive or proactive cooling techniques need to be applied to ensure the long-term stability of thermally unstable, thick permafrost subsoils, and/or refill with non-frost-susceptible soils. Due to the long-history of the construction and management of the Corridor by various government departments, adverse impacts of construction and operation on the permafrost environment have been resulted. It is recommended that an integrated, executable plan for the routing of major construction projects within this transportation corridor be established and long-term monitoring networks installed for evaluating and mitigating the impact from anthropogenic and climatic changes in frozen-ground conditions.  相似文献   

DEM analysis of the crack propagation in brittle clays under uniaxial compression tests   总被引：2，自引：0，他引：2  

Luis F. Vesga  Luis E. Vallejo  Sebastian Lobo‐Guerrero 《国际地质力学数值与分析法杂志》2008,32(11):1405-1415

  相似文献   

Numerical estimation of REV and permeability tensor for fractured rock masses by composite element method   总被引：2，自引：0，他引：2  

S.‐H. Chen  X.‐M. Feng  S. Isam 《国际地质力学数值与分析法杂志》2008,32(12):1459-1477

The Monte Carlo method is used to generate parent stochastic discrete fracture network, from which a series of fractured rock samples of different sizes and orientations are extracted. The fracture network combined with a regular grid forms composite element mesh of the fractured rock sample, in which each composite element is composed of sub‐elements incised by fracture segments. The composite element method (CEM) for the seepage is implemented to obtain the nodal hydraulic potential as well as the seepage flow rates through the fractured rock samples. The application of CEM enables a large quantity of stochastic tests for the fractured rock samples because the pre‐process is facilitated greatly. By changing the sizes and orientations of the samples, the analysis of the seepage characteristics is realized to evaluate the variation of the permeability components, the existence of the permeability tensor and the representative element volume. The feasibility and effectiveness are illustrated in a numerical example. Copyright © 2008 John Wiley & Sons, Ltd.  相似文献