Summer temperatures in Europe and land heat fluxes in observation-based data and regional climate model simulations     

Annemiek I. Stegehuis  Robert Vautard  Philippe Ciais  Adriaan J. Teuling  Martin Jung  Pascal Yiou 《Climate Dynamics》2013,41(2):455-477

The occurrence and intensity of heatwaves is expected to increase with climate change. Early warnings of hot summers have therefore a great socio-economical value. Previous studies have shown that hot summers are preceded by a Southern European rainfall deficit during winter, and higher spring temperatures. Changes in the surface energy budget are believed to drive this evolution, in particular changes in the latent and sensible heat fluxes. However these have rarely been investigated due to the lack of long-term reliable observation data. In this study, we analyzed several data-derived gridded products of latent and sensible heat fluxes, based on flux tower observations, together with re-analyses and regional climate model simulations over Europe. We find that warm summers are preceded by an increase in latent heat flux in early spring. During warm summers, an increase in available energy results in an excess of both latent and sensible heat fluxes over most of Europe, but a latent heat flux decrease over the Iberian Peninsula. This indicates that, on average, a summertime soil-moisture limited evapotranspiration regime only prevails in the Iberian Peninsula. In general, the models that we analyzed overestimate latent heat and underestimate sensible heat as compared to the flux tower derived data-product. Most models show considerable drying during warm seasons, leading to the establishment of a soil-moisture limited regime across Europe in summer. This over-estimation by the current generation of models of latent heat and hence of soil moisture deficit over Europe in summer has potential consequences for future summertime climate projections and the projected frequency of heat waves. We also show that a northward propagation of drought during warm summers is found in model results, a phenomenon which is also seen in the flux tower data-product. Our results lead to a better understanding of the role of latent and sensible heat flux in summer heatwaves, and provide a framework for benchmark of modeling studies.  相似文献   

Formation and evolution of mesoscale convective systems that brought the heavy rainfall over Seoul on September 21, 2010     

Woomi Jung  Tae-Young Lee 《Asia-Pacific Journal of Atmospheric Sciences》2013,49(5):635-647

An investigation has been carried out using observational data and a numerical model to explain the formation and development of heavy precipitation systems on September 21, 2010. These systems were responsible for heavy rainfall over the middle Korean peninsula, with a maximum 24-h rainfall amount greater than 290 mm in the Seoul metropolitan area. Both observational analysis and a numerical simulation indicate that an important starting condition for this heavy rainfall event is the presence of a pressure trough over the Shandong peninsula and the Yellow Sea. Convective cells formed in the early morning over this trough area, grew into larger systems as they moved eastward, and induced the formation of a meso low over the Yellow Sea around 0000 UTC on September 21, 2010. A stationary front with significant vertical circulation developed in response to the deformation of flow associated with the meso low. In the meantime, multicell-type convective systems continuously developed and moved along the front. These storms developed further and produced heavy rainfall over the middle Korean peninsula, which includes the Seoul metropolitan area. According to observations, the band structure appeared to change after 0700 UTC as a narrow convection band developed over the sea, upstream of the existing band of multicell storms. Numerical simulation showed a similar transition. However, it failed to reproduce the stationary behavior of the observed band.  相似文献   

Impact of lateral boundary conditions on precipitation and temperature extremes over South Korea in the CORDEX regional climate simulation using RegCM4   总被引：1，自引：0，他引：1  

Seok-Geun Oh  Myoung-Seok Suh  Dong-Hyun Cha 《Asia-Pacific Journal of Atmospheric Sciences》2013,49(4):497-509

  相似文献   

Prospects of using Bayesian model averaging for the calibration of one-month forecasts of surface air temperature over South Korea     

Chansoo Kim  Myoung-Seok Suh 《Asia-Pacific Journal of Atmospheric Sciences》2013,49(3):301-311

In this study, we investigated the prospect of calibrating probabilistic forecasts of surface air temperature (SAT) over South Korea by using Bayesian model averaging (BMA). We used 63 months of simulation results from four regional climate models (RCMs) with two boundary conditions (NCEP-DOE and ERA-interim) over the CORDEX East Asia. Rank histograms and residual quantile-quantile (R-Q-Q) plots showed that the simulation skills of the RCMs differ according to season and geographic location, but the RCMs show a systematic cold bias irrespective of season and geographic location. As a result, the BMA weights are clearly dependent on geographic location, season, and correlations among the models. The one-month equal weighted ensemble (EWE) outputs for the 59 stations over South Korea were calibrated using the BMA method for 48 monthly time periods based on BMA weights obtained from the previous 15 months of training data. The predictive density function was calibrated using BMA and the individual forecasts were weighted according to their performance. The raw ensemble forecasts were assessed using the flatness of the rank histogram and the R-Q-Q plot. The results showed that BMA improves the calibration of the EWE and the other weighted ensemble forecasts irrespective of season, simulation skill of the RCM, and geographic location. In addition, deterministic-style BMA forecasts usually perform better than the deterministic forecast of the single best member.  相似文献   

Winter distribution of diatom assemblages along the coastline of R. O. Korea in 2010     

Joon Sang Park  Kyun-Woo Lee  Seung Won Jung  Taek-Kyun Lee  Hyoung Min Joo 《海洋学报(英文版)》2022,41(6):68-77

Diatoms are a globally successful and eukaryotic photosynthetic organism with an ornamented silica external wall. The relationship between their valve morphology and habitat means that diatoms can be used as bioindicators to characterize the aquatic environment. To estimate the differential distribution and diversity of diatom assemblages along the coastal line, we collected phytoplankton samples from 114 coastal sites of waters of R. O. Korea. We applied the unweighted pair-group technique usin...  相似文献   

Grain boundaries as microreactors during reactive fluid flow: experimental dolomitization of a calcite marble   总被引：2，自引：0，他引：2  

B.?Etschmann  J.?BruggerEmail author  M.?A.?Pearce  C.?Ta  D.?Brautigan  M.?Jung  A.?Pring 《Contributions to Mineralogy and Petrology》2014,168(2):1045

Limestone dolomitization is an example of a fluid-induced mineralogical transformation that commonly affects extensive rock volumes. To understand the mechanisms enabling these efficient replacement reactions, we investigated experimentally the dolomitization of a fractured calcite marble under flow-through conditions at mild hydrothermal conditions. Contrary to most earlier studies of coupled dissolution reprecipitation reactions that were conducted using small, individual grains, in this study, the integrity of the rock was preserved, so that the experiment explored the links between flow in a fracture and fluid–rock interaction. In these experiments, grain boundaries acted as microreactors, in which a Mg-poor ‘protodolomite’ formed initially, and then transformed into dolomite. The difficulty in nucleating dolomite played a key role in controlling the evolution of the porosity, by allowing for (1) initial dissolution along grain boundaries, and (2) formation of coarse porosity at the reaction interface. This porosity evolution not only enabled the reaction to progress efficiently, but also controlled the mineralogy of the system, as shown by brucite replacing calcite near the fracture once the fluid along calcite grain boundaries became sufficiently connected to the fluid flowing through the fracture. This study illustrates the role of grain boundaries, porosity evolution and nucleation in controlling reaction progress as well as the nature and textures of the products in pervasive mineralogical transformations.  相似文献   

Effect of water and stress on the lattice-preferred orientation of olivine   总被引：6，自引：1，他引：5  

H. Jung  I. Katayama  Z. Jiang  T. Hiraga  S. Karato   《Tectonophysics》2006,421(1-2):1-22

The influence of water and stress on the lattice-preferred orientation (LPO) of olivine aggregates was investigated through large strain, shear deformation experiments at high pressures and temperatures (P = 0.5–2.1 GPa, T = 1470–1570 K) under both water-poor and water-rich conditions. The specimens are hot-pressed synthetic olivine aggregates or single crystals of olivine. Water was supplied to the sample by decomposition of a mixture of talc and brucite. Deformation experiments were conducted up to γ (shear strain)  6 using the Griggs apparatus where water fugacity was up to  13 GPa at the pressure of 2 GPa. The water content in olivine saturated with water increases with increasing pressure and the solubility of water in olivine at P = 0.5–2 GPa was  400–1200 ppm H/Si. Several new types of LPO in olivine are found depending on water content and stress. Samples deformed in water-poor conditions show a conventional LPO of olivine where the olivine [100] axis is subparallel to the shear direction, the (010) plane subparallel to the shear plane (type-A). However, we identified three new types (type-B, C, and E) of LPO of olivine depending on the water content and stress. The type-B LPO of olivine which was found at relatively high stress and/or under moderate to high water content conditions is characterized by the olivine [001] axis subparallel to the shear direction, the (010) plane subparallel to the shear plane. The type-C LPO which was found at low stress and under water-rich conditions is characterized by the olivine [001] axis subparallel to the shear direction, the (100) plane subparallel to the shear plane. The type-E LPO which was found under low stress and moderate water content is characterized by the olivine [100] axis subparallel to the shear direction, the (001) plane subparallel to the shear plane. Observations by transmission electron microscopy (TEM) and scanning electron microscopy (SEM) show that the dislocations in water-poor samples (type-A) are curved and both b =  [100] and b = [001] dislocations have a similar population. Numerous subgrains are seen in water-poor samples in backscattered electron images. In contrast, water-rich samples (both type-B and type-C) contain mostly b = [001] dislocations and dislocations are straight and sub-grain boundaries are rare compared to those in water-poor samples. These observations suggest that (1) dominant slip systems in olivine change with water fugacity (and stress) and (2) grain boundary migration is enhanced in the presence of water. Seismic anisotropy corresponding to the fabrics under water-rich condition is significantly different from that under water-poor condition. Consequently, the relationship between seismic anisotropy and flow geometry in water-rich regions is expected to be different from that in water-poor regions in which type-A fabric dominates (i.e., the lithosphere). A few cases are discussed including anisotropy in the subduction zone and in the deep upper mantle.  相似文献   

Arctic margin gravity highs: Deeper meaning for sediment depocenters?     

Vogt  Peter R.  Jung  Woo-Yeol  Brozena  John 《Marine Geophysical Researches》1998,20(5):459-477

Morphologic, gravity, and seismic reflection/refraction data from ca. 10,000 km of Arctic passive continental margins suggest that the numerous oval free-air gravity anomalies, their +50–150 mGal extrema typically located just landward of shelf breaks, are caused by combinations of rapidly deposited Plio-Pleistocene glacial marine sediment loads, older post-breakup sediments, and perhaps causally related density anomalies (mascons) in the underlying oceanic crust. Dispersed seismicity associated with some gravity highs may reflect ongoing brittle, flexural adjustment to the loads. Multi-channel-seismic-controlled depocenter models for several prominent highs (including the Hornsund gravity high re-examined here) suggest that sediments alone do not suffice to explain the gravity highs, unless depocenter seismic velocities have been significantly underestimated. A flexural backstripping model for the Hornsund anomaly only roughly replicates observed gravity. Subjacent 'mascons', if present below some depocenters, may be caused by (1) anomalous subsidence of initially formed dense/thin crust; (2) depocenter blanketing of early-formed crust, mitigating hydrothermal fracturing and related density reduction; or (3) metastable phase transitions, converting basalt/gabbro to denser phases (Neugebauer–Spohn hypothesis), while cracks close or fill under the increased pressures and temperatures.  相似文献   

Bioremediation of contaminated coastal sediment: Optimization of slow release biostimulant ball using response surface methodology (RSM) and stabilization of metals from contaminated sediment     

Bakthavachallam Subha  Young Chae Song  Jung Hui Woo 《Marine pollution bulletin》2017,114(1):285-295

The aim of the present study is to optimize the slow release biostimulant ball (BSB) for bioremediation of contaminated coastal sediment using response surface methodology (RSM). Metals contamination and stabilization of metals in coastal sediments using BSB were investigated. The effects of BSB size (1–5 cm), distance (1–10 cm), and time (1–4 months) on the stabilization of metals including Fe, Cd, Cu, and Pb were determined. The maximum stabilization percentages of Fe, Cd, Cu, and Pb, of 64.5%, 54.9%, 63.8%, and 47.6%, respectively, were observed at a 3 cm ball size, 5.5 cm distance, and a period of 4 months; these values are the optimum conditions for effective treatment of contaminated coastal sediment. The determination coefficient of the R² value suggests that > 91.55%, 89.97%, 96.10%, and 86.40% of the variance is attributable to the variables of Fe, Cd, Cu, and Pb, respectively.  相似文献   

Zircon chemistry and new laser ablation U–Pb ages for uraniferous granitoids in SW Cameroon     

V.F.Embui  C.E.Suh  J.M.Cottle  J.Etame  J.Mendes  C.M.Agyingi  A.Vishiti  E.M.Shemang  B.Lehmann 《Acta Geochimica》2020,(1):43-66

The Ekomedion two-mica granite,southwestern Cameroon,has potential for uranium and molybdenum mineralization.Here,we present LA-ICP-MS U-Pb ages,Lu-Hf isotope characteristics,trace element concentrations and Ti-geothermometry of zircon from this granite hosting U-Mo mineralization in pegmatitic pods.The majority of zircon are CL-dark though some CL-bright cores were also identified.U-Pb zircon age data range from 121±3 to743±11 Ma with only 5 of 34 ages being near concordant.The concordant mean age of 603±12 Ma is similar to ages of granitic intrusions along the Central African Shear Zone in Cameroon.Apparent ages with mean of261±6 Ma reveal open system behavior with respect to Pb and/or U.Zircon e Hfi values range from-20.3 to-0.3.This implies that U-Mo was remobilized during partial melting of the surrounding gneiss.Zircon Th/U>0.1 as well as an increasing Hf with decreasing Th/U indicates that fractional crystallization was the main factor that controlled U-Mo mineralization in pegmatitic pods.Y and Y/Ho ratios cluster from 29 to 33 close to the chondritic ratio of 28 and indicate fractionation of Y and Ho with low F contents during the earliest stages of crystallization.Late stage accumulation of F-rich magmatic-hydrothermal fluids impacted U-Mo mineralization as a ligand.Zircon contains a prominent negative Eu anomaly pointing to a fractionating system rich in plagioclase.Calculated Ti-in-zircon temperatures span 672℃to1232℃with the temperatures at the high end reflecting interference from mineral inclusions in the zircon grains while the lower temperature values are linked to crystallization.  相似文献