Growth performance of larval and juvenile manila clam (<Emphasis Type="Italic">Ruditapes philippinarum</Emphasis>) from divergently selected individuals of a full-sib family     

Zhongming Huo  Xiaotong Li  Qian Sun  Yongren Li  Xuekai Zhang  Xiwu Yan  Feng Yang 《中国海洋大学学报(英文版)》2016,15(6):1046-1050

In this study, the method of divergent selection was employed to test the larval and juvenile growth performance within a full-sib family of Manila clam Ruditapes philippinarum. The 10% largest and 10% smallest clam individuals (on the basis of shell length) of a full-sib family were selected as parents for the fast and slow growing lines, respectively. The difference in shell length was significant among the three lines (fast, control, and slow) tested. The sequence of shell length were fast line > control line > slow line. The responses to selection, realized heritability, and genetic gain were 0.06%–0.81%, 0.04%–0.47% and 0.58%–18.89% in the fast direction, respectively; and were 0.14%–1.27%, 0.08%–0.73%, and 0.31%–49.03% in the slow direction, respectively. The results suggested that there was a large portion of additive genetic variance affecting the growth in the full-sib family. Selection in the fast direction within the full-sib family would greatly improve the growth of R. philippinarum.  相似文献   

The Impact of Large-Scale Reclamation on Hydro-Dynamic Environment——A Case Study of Xinghua Bay     

YU Jing  BAO Xianwen  DING Yang  ZHANG Wei  ZHOU Lingling 《中国海洋大学学报(英文版)》2016,15(4):583-592

A hydro-dynamic model is established on basis of MIKE21 FM to simulate the hydro-dynamic characteristics of Xinghua Bay and investigate the influence of reclamation project on the tidal elevation and tidal currents. Tidal elevation data was obtained at the six tide gauge stations around the Xinghua Bay, and another six current stations were established to observe the tidal current velocity and direction. Validation shows that the model-simulated tidal elevation and tidal currents agree well with observations made at different stations. Predictions are made according to the reclamation project proposed in the regional marine planning of Hanjiang Industrial Park around the port in Putian City. The variations of hydro-dynamic factors, such as tide, current velocity and direction and tidal influx are obtained, and the adverse effect of reclamation on marine environment is discussed. It is shown that the tidal level inside the Xinghua Bay during high tide decreases after the reclamation project is completed. The tidal currents during flooding tide generally decrease in the southeast of the reclamation region, with the maximum decreasing amplitude reaching 0.44 m s^-1. On the other hand, the tidal currents during flooding tide increase around the southeast and southwest corners of the reclamation region. The tidal currents during ebb tide increase around the southeast and southwest corners of the reclamation region, with the maximum increasing amplitude attaining 0.18 m s^-1. The results in this paper can give some guidance for the marine environment management and the effective utilization of land in Putian.  相似文献   

Tide and current observations in the central Chukchi Sea during the summer of 2012     

Huiwu Wang  Na Liu  Hongxia Chen 《中国海洋大学学报(英文版)》2016,15(2):201-208

Current data from a moored Acoustic Doppler Current Profiler(ADCP) deployed at 69?30.155′N,169?00.654′W in the central Chukchi Sea during 2012 summertime is analyzed in the present paper.Characteristics of tidal and residual currents are ob-tained with Cosine-Lanczos filter and cross-spectral analyses.The main achievements are as follows:1) Along with the local inertial frequency of 12.8 h,two other peaks at ~12-h and ~10-d dominate the time series of raw velocity;2) The M_2 dominates the 6 resolved tide constituents with significant amplitude variations over depth and the ratios of current speed of this constituent to that of the total tidal current are 54% and 47% for u and v components,respectively.All the resolved tidal constituents rotate clockwise at depth with the exception of MM and O1.The constituents of M_2 and S_2 with the largest major semi-axes are similar in eccentricity and orientation at deeper levels;3) The maximum of residual currents varies in a range of 20–30 cms~(-1) over depth and the current with lower velocities flow more true north with smaller magnitudes compared to the current in surface layer.The ~10 d fluctuation of residual current is found throughout the water column and attributed to the response of current to the local wind forcing,with an approximate 1.4 d lag-time at the surface level and occurring several hours later in the lower layer;4) Mean residual currents flow toward the north with the magnitudes smaller than 7 cms~(-1) in a general agreement with previous studies,which suggests a relatively weaker but stable northward flow indeed exists in the central Chukchi Sea.  相似文献   

Phase characteristic analysis of continuous depth air-gun source wavelet     

Lei Xing  Huaishan Liu  Xilai Zheng  Xueqin Liu  Jin Zhang  Linfei Wang  Zhihui Zou  Yiming Xu 《中国海洋大学学报(英文版)》2016,15(5):815-824

Air guns are important sources for marine seismic exploration. Far-field wavelet of air gun arrays, as a necessary parameter for pre-stack processing and source models, plays an important role during marine seismic data processing and interpretation. When an air gun fires, it generates a series of air bubbles. Similar to onshore seismic exploration, the water forms a plastic fluid near the bubble; the farther the air gun is located from the measurement, the more steady and more accurately represented the wavelet will be. In practice, hydrophones should be placed more than 100 m from the air gun; however, traditional seismic cables cannot meet this requirement. On the other hand, vertical cables provide a viable solution to this problem. This study uses a vertical cable to receive wavelets from 38 air guns and data are collected offshore Southeast Qiong, where the water depth is over 1000 m. In this study, the wavelets measured using this technique coincide very well with the simulated wavelets and can therefore represent the real shape of the wavelets. This experiment fills a technology gap in China.  相似文献   

Provenance of buried esker groundwater: the case of Vars-Winchester esker aquifer,Eastern Ontario,Canada     

Jacques Sauriol 《Hydrogeology Journal》2016,24(1):123-139

An innovative mode of groundwater recharge to a buried esker aquifer is considered. The current conceptual model affords a natural safeguard to underlying aquifers from the overlying muds. A hypothesis of groundwater recharge to a buried esker aquifer via preferential pathways across its overlying muds is tested here by heuristic numerical one-dimensional and two-dimensional modeling simulations. The hypothesis has been tested against two other conventionally accepted scenarios involving: (1) distal esker outcrop areas and (2) remote shallow-bedrock recharge areas. The main evidence comes from documented recharge pressure pulses in the overlying mud aquitard and in the underlying esker hydraulic-head time series for the Vars-Winchester esker aquifer in Eastern Ontario, Canada. These perturbations to the potentiometric surface are believed to be the aquifer response to recharge events. The migration rate of these pressure pulses is directly related to the hydraulic diffusivity of the formation. The measured response time and response amplitude between singular radar precipitation events and well hydrographs constituted the heuristic model calibration targets. The main evidence also includes mud-layering deformation (water escape features) which was observed in seismic surveys of the over-esker muds. These disturbed stratigraphic elements provide a realistic mechanism for migrating water to transit through the muds. The effective hydraulic conductivities of these preferential pathways in the muds were estimated to be between 2?×?10^?6 and 7?×?10^?6 m/s. The implications of these findings relate to the alleged natural safeguard of these overlying muds.  相似文献   

Characterization of fresh and weathered petroleum for potential impacts to soil fertility     

C. M. Morales-Bautista  R. H. Adams  J. R. Hernández-Barajas  C. E. Lobato-García  J. G. Torres-Torres 《International Journal of Environmental Science and Technology》2016,13(11):2689-2696

In many petroleum-producing regions, there are not adequate controls to prevent pipeline breaks and spills, and thus soil is frequently contaminated with petroleum hydrocarbons. Different petroleum oil compounds may produce negative impacts on soil fertility. In this study, four fresh crudes, a weathered petroleum, and oils from bioremediated and burned sites were investigated (specific gravities 0.83–1.27). Fourier transform infrared spectroscopy revealed three predominant polar functional groups to be more plentiful in the heavier crudes. The relative abundance of these groups was used to calculate an index that was directly correlated with specific gravity (R ² = 0.9960) and the percent of asphaltene plus (polars + resins) fractions in the oil (R ² = 0.9643). This index correlated exponentially to the water repellency caused by petroleum in an alluvial soil (R ² = 0.9928). Furthermore, extra-heavy oil at a concentration of 10,000 ppm, the maximum allowable oil concentration in the soil that is within regulatory norms in many US states and other countries, and with a specific gravity >1.002, showed severe water repellency. This study presents an alternative for determining soil remediation criteria based on the API gravity of the oil rather than the C-range of the hydrocarbon mixtures, simplifying analytical methods and systematically studying the interaction between the kinds of petroleum mixtures and potential impacts to soil fertility.  相似文献   

Enhanced bioremoval of refractory compounds from dyeing wastewater using optimized sequential anaerobic/aerobic process     

W. Bae  D. Han  E. Kim  R. A. de Toledo  K. Kwon  H. Shim 《International Journal of Environmental Science and Technology》2016,13(7):1675-1684

The upflow anaerobic sludge blanket process followed by the biological aerated filter process was employed to improve the removal of color and recalcitrant compounds from real dyeing wastewater. The highest removal efficiency for color was observed in the anaerobic process, at 8-h hydraulic retention time, seeded with the sludge granule. In the subsequent aerobic process packed with the microbe-immobilized polyethylene glycol media, the removal efficiency for chemical oxygen demand increased significantly to 75 %, regardless of the empty bed contact time. The average influent non-biodegradable soluble chemical oxygen demand was 517 mg/L, and the average concentration in effluent from the anaerobic reactor was 363 mg/L, suggesting the removal of some recalcitrant matters together with the degradable ones. The average non-biodegradable soluble chemical oxygen demand in effluent from the aerobic reactor was 87, 93, and 118 mg/L, with the removal efficiency of 76, 74, and 67 %, at 24-, 12-, and 8-h empty bed contact time, respectively. The combined anaerobic sludge blanket and aerobic cell-entrapped process was effective to remove the refractory compounds from real dyeing wastewater as well as in reducing organic loading to meet the effluent discharge limits. This integrated process is considered an effective and economical treatment technology for dyeing wastewater.  相似文献   

Bioadsorption by sugarcane bagasse for the reduction in oil and grease content in aqueous effluent     

H. T. Boni  D. de Oliveira  A. A. Ulson de Souza  S. M. A. G. Ulson de Souza 《International Journal of Environmental Science and Technology》2016,13(4):1169-1176

Several techniques have been used to reduce the oil and grease content in aqueous streams; one excellent is bioadsorption. With a view to provide a sustainable method for the treatment of oily effluents, the aim of this study was to evaluate sugarcane bagasse as bioadsorbent to reduce the oil and grease content of aqueous effluents. Analysis of the material was performed, and the adsorption experiments were in a batch system, using a synthetic effluent. The results showed that the kinetic equilibrium occurred in 0.08 h of contact. The study of influence of pH of the aqueous phase and the temperature showed that the adsorption capacity was proportional to the pH value, but inversely proportional to the temperature. The adsorption isotherm was obtained at a temperature of 298.15 K using the Langmuir and Langmuir–Freundlich models, and the maximum adsorption capacity obtained was 6.65 kg of hydrocarbon per kg of bioadsorbent. It was verified that sugarcane bagasse represents an excellent material for application in the treatment of oily aqueous effluents, since it is associated with low cost and a high adsorption capacity. The variation in the adsorption capacity observed as a function of pH of the aqueous phase was not found to be significant. This is an important characteristic of the material in terms of its industrial application, verifying the possibility for its implementation in any treatment process, demonstrating the great potential of sugarcane bagasse for use as a sustainable alternative in the reduction in oil and grease in aqueous effluents.  相似文献   

Prediction of ground vibration due to quarry blasting based on gene expression programming: a new model for peak particle velocity prediction   总被引：1，自引：1，他引：0  

R Shirani Faradonbeh  D Jahed Armaghani  M. Z. Abd Majid  M. MD Tahir  B. Ramesh Murlidhar  M. Monjezi  H. M. Wong 《International Journal of Environmental Science and Technology》2016,13(6):1453-1464

Blasting is a widely used technique for rock fragmentation in opencast mines and tunneling projects. Ground vibration is one of the most environmental effects produced by blasting operation. Therefore, the proper prediction of blast-induced ground vibrations is essential to identify safety area of blasting. This paper presents a predictive model based on gene expression programming (GEP) for estimating ground vibration produced by blasting operations conducted in a granite quarry, Malaysia. To achieve this aim, a total number of 102 blasting operations were investigated and relevant blasting parameters were measured. Furthermore, the most influential parameters on ground vibration, i.e., burden-to-spacing ratio, hole depth, stemming, powder factor, maximum charge per delay, and the distance from the blast face were considered and utilized to construct the GEP model. In order to show the capability of GEP model in estimating ground vibration, nonlinear multiple regression (NLMR) technique was also performed using the same datasets. The results demonstrated that the proposed model is able to predict blast-induced ground vibration more accurately than other developed technique. Coefficient of determination values of 0.914 and 0.874 for training and testing datasets of GEP model, respectively show superiority of this model in predicting ground vibration, while these values were obtained as 0.829 and 0.790 for NLMR model.  相似文献   

Enhancement of a hypoplastic model for granular soil–structure interface behaviour     

H. Stutz  D. Mašín  F. Wuttke 《Acta Geotechnica》2016,11(6):1249-1261

Modelling of interfaces in geotechnical engineering is an important issue. Interfaces between structural elements (e.g., anchors, piles, tunnel linings) and soils are widely used in geotechnical engineering. The objective of this article is to propose an enhanced hypoplastic interface model that incorporates the in-plane stresses at the interface. To this aim, we develop a general approach to convert the existing hypoplastic model with a predefined limit state surface for sands into an interface model. This is achieved by adopting reduced stress and stretching vectors and redefining tensorial operations which can be used in the existing continuum model with few modifications. The enhanced interface model and the previous model are compared under constant-load, stiffness and volume conditions. The comparison is followed by a verification of two the approaches for modelling the different surface roughness. Subsequently, a validation between available experimental data from the literature versus simulations is presented. The new enhanced model gives improved predictions by the incorporation of in-plane stresses into the model formulation.  相似文献