Investigating gully flow emplacement mechanisms using apex slopes     

Kelly Jean Kolb  Alfred S. McEwen 《Icarus》2010,208(1):132-142

The origin of the martian gullies has been much debated since their discovery by the Mars Orbiter Camera (MOC, Malin, M.C., Edgett, K.S. [2000]. Science 288, 2330-2335). Several previous studies have looked at slope gradients in and around gullies, but none have used Digital Elevation Models (DEMs) from the High Resolution Imaging Science Experiment (HiRISE, McEwen, A.S., and 14 colleagues [2007]. J. Geophys. Res. 112 (E05), E0505S02), which has a pixel scale down to 25 cm/pixel. We use five 1 m/post HiRISE DEMs to measure gully apex slopes, the local channel gradient at the upslope extent of the gully debris apron, which marks a shift from erosion to deposition. The apex slope provides information about whether a flow was likely a typical dry granular flow (begins depositing on slopes ∼21°) or fluidized by some extra mechanism (depositing on shallower slopes). We find that 72% of the 75 gully fans studied were likely emplaced by fluidized flows. Relatively old gullies appear more likely to have hosted fluidized flows than relatively fresh gullies. This suggests a time and location dependent fluidizing agent, possibly liquid water produced in a different climate as previously proposed. Our results do not provide evidence for water-rich flows in gullies today.  相似文献   

Bayesian lithology/fluid inversion—comparison of two algorithms   总被引：1，自引：0，他引：1  

Marit Ulvmoen  Hugo Hammer 《Computational Geosciences》2010,14(2):357-367

Algorithms for inversion of seismic prestack AVO data into lithology-fluid classes in a vertical profile are evaluated. The inversion is defined in a Bayesian setting where the prior model for the lithology-fluid classes is a Markov chain, and the likelihood model relates seismic data and elastic material properties to these classes. The likelihood model is approximated such that the posterior model can be calculated recursively using the extremely efficient forward–backward algorithm. The impact of the approximation in the likelihood model is evaluated empirically by comparing results from the approximate approach with results generated from the exact posterior model. The exact posterior is assessed by sampling using a sophisticated Markov chain Monte Carlo simulation algorithm. The simulation algorithm is iterative, and it requires considerable computer resources. Seven realistic evaluation models are defined, from which synthetic seismic data are generated. Using identical seismic data, the approximate marginal posterior is calculated and the exact marginal posterior is assessed. It is concluded that the approximate likelihood model preserves 50% to 90% of the information content in the exact likelihood model.  相似文献   

Determinants of corporate adaptation to climate change in winter tourism: An econometric analysis     

Volker H. Hoffmann  David C. Sprengel  Andreas Ziegler  Matthias Kolb  Bruno Abegg 《Global Environmental Change》2009,19(2):256-264

While corporate adaptation strategies in response to climate change have been characterized, the determinants of adaptation have not been comprehensively analyzed. Knowledge of these determinants is particularly useful for policy makers to provide favorable conditions in support of corporate adaptation measures. Based on unique data from a survey of Swiss ski lift operators, this paper empirically examines such determinants at the business level. Our econometric analysis with linear regression and count data models finds a positive influence of the awareness of possible climate change effects on the scope of corporate adaptation. Surprisingly, no significant influence of the vulnerability to climate change effects on the scope of adaptation could be found. Finally, the dependency on the affected business and the ability to adapt influence the specific strategic directions of corporate adaptation.  相似文献   

Ermittlung der Nachweis-, Erfassungs- und Bestimmungsgrenze nach DIN 32645 mit Hilfe eines Programms Calculation of Detection Limit,Identification Limit and Determination Limit according to DIN 32645 with the Aid of a Computer Programs     

M. Kolb  A. Bahr  S. Hippich  W. Schulz 《洁净——土壤、空气、水》1993,21(6):308-311

The new German standard specification DIN 32645 defines detection, identification and determination limit of analytical experiments and contains formulas for their calculation. The detection limit is a qualitative value, only at the determination limit a quantitative statement is possible. The identification limit is no limit of decision for analyses. The expenditure for calculating these parameters is considerable. Therefore, a computer program was developed and tested at the analysis of herbicides with GC-MS after enrichment with solid phase extraction (SPE). It proved that the program is also very useful at the development of analytical methods, because it allows a quick examination of changes of the analytical method. After optimization detection limits for the herbicides were achieved which amount 10–20% of the limit of the German drinking water regulation.  相似文献   

Terrace stratigraphy in the Tunica Hills of Louisiana     

John J. Alford  Charles R. Kolb  Joseph C. Holmes 《Quaternary Research》1983,19(1):55-63

The age and number of important fossil-producing late Pleistocene terraces in the Tunica Hills have recently become quite controversial. One hypothesis holds that only a single loess-mantled Farmdalian terrace flanks the streams in this area. The other maintains that there are two terraces. The youngest is considered essentially Holocene in age while the older is Sangamon in age. Radiometric and stratigraphic evidence collected for this study indicates that there are two terraces. The youngest is late Woodfordian to Holocene in age while the other is Farmdalian.  相似文献   

Development of fluid conduits in the auriferous shear zones of the Hutti Gold Mine, India: evidence for spatially and temporally heterogeneous fluid flow   总被引：1，自引：0，他引：1  

Jochen Kolb  Amanda Rogers  F. Michael Meyer  Torsten W. Vennemann 《Tectonophysics》2004,378(1-2):65-84

The gold mineralization of the Hutti Mine is hosted by nine parallel, N–S trending, steeply dipping, 2–10 m wide shear zones, that transect Archaean amphibolites. The shear zones were formed after peak metamorphism during retrograde ductile D₂ shearing in the lower amphibolite facies. They were reactivated in the lower to mid greenschist facies by brittle–ductile D₃ shearing and intense quartz veining. The development of a S₂–S₃ crenulation cleavage facilitates the discrimination between the two deformation events and contemporaneous alteration and gold mineralization. Ductile D₂ shearing is associated with a pervasively developed distal chlorite–sericite alteration assemblage in the outer parts of the shear zones and the proximal biotite–plagioclase alteration in the center of the shear zones. D₃ is characterized by development of the inner chlorite-K-feldspar alteration, which forms a centimeter-scale alteration halo surrounding the laminated quartz veins and replaces earlier biotite along S₃. The average size of the laminated vein systems is 30–50 m along strike as well as down-dip and 2–6 m in width.Mass balance calculations suggest strong metasomatic changes for the proximal biotite–plagioclase alteration yielding mass and volume increase of ca. 16% and 12%, respectively. The calculated mass and volume changes of the distal chlorite–sericite alteration (ca. 11%, ca. 8%) are lower. The decrease in δ¹⁸O values of the whole rock from around 7.5‰ for the host rocks to 6–7‰ for the distal chlorite–sericite and the proximal biotite–plagioclase alteration and around 5‰ for the inner chlorite-K-feldspar alteration suggests hydrothermal alteration during two-stage deformation and fluid flow.The ductile D₂ deformation in the lower amphibolite facies has provided grain scale porosities by microfracturing. The pervasive, steady-state fluid flow resulted in a disseminated style of gold–sulfide mineralization and a penetrative alteration of the host rocks. Alternating ductile and brittle D₃ deformation during lower to mid greenschist facies conditions followed the fault-valve process. Ductile creep in the shear zones resulted in a low permeability environment leading to fluid pressure build-up. Strongly episodic fluid advection and mass transfer was controlled by repeated seismic fracturing during the formation of laminated quartz(-gold) veins. The limitation of quartz veins to the extent of earlier shear zones indicate the importance of pre-existing anisotropies for fault-valve action and economic gold mineralization.  相似文献   

Fluid inclusion record of the hypozonal orogenic Renco gold deposit (Zimbabwe) during the retrograde P–T evolution     

Jochen Kolb  Michael F. Meyer 《Contributions to Mineralogy and Petrology》2002,143(4):495-509

  相似文献   

Timing of Uralian orogenic gold mineralization at Kochkar in the evolution of the East Uralian granite-gneiss terrane     

Jochen Kolb  Sven Sindern  Alexander F. M. Kisters  F. Michael Meyer  Stephan Hoernes  Jens Schneider 《Mineralium Deposita》2005,40(5):473-491

Gold mineralization at Kochkar (Urals, Russia) is hosted mainly by quartz lodes, which developed at lithological contacts between mafic dikes and granitoids of the Plast massif during late Carboniferous to early Permian, regional E–W compression in the East Uralian Zone (EUZ). The alteration mineralogy in mafic dikes comprises biotite, actinolite, albite, K-feldspar, quartz, epidote, tourmaline, sericite, pyrite, arsenopyrite, chalcopyrite, sphalerite, fahlores, galena, bismuthinite, and gold, and in Plast granitoids quartz, sericite, calcite, epidote, and ore minerals. Geochemically, an enrichment of Si, K, Rb, Ba, S, base metals, W, and Au can be observed. The ore fluid had δ¹⁸O values between 8.2‰ and 9.5‰ typical for metamorphic or deep magmatic fluids. The tectonometamorphic evolution of the EUZ is marked by peak metamorphic conditions at 635±40°C and 5–6 kbar through 500±20°C during gold mineralization, and 300–350°C and 2–3 kbar. The last event was dated on a late, barren quartz vein formed during greenschist facies metamorphism at 265±3 Ma by the Rb–Sr method. Fluids related to this overprint had a δ¹⁸O value of 5.2‰ and an initial ⁸⁷Sr/⁸⁶Sr ratio of 0.70685 indicating that they are largely equilibrated with metamorphic lithologies of the EUZ. The Plast granitoids and the adjacent Borisov granite, which was dated at 358±23 Ma (U–Pb zircon age), have an adakitic character. This, together with the arc-signature of the mafic dikes, supports the setting of the EUZ within the Valerianovsky continental arc. Eastward subduction of the Uralian Ocean below this arc began during the late Devonian to early Carboniferous. Between 320 and 265 Ma, the oblique closure of the ocean resulted in doming of granitoid massifs in a sinistral transpressional regime, subsequent retrograde gold mineralization during E–W compression and a later greenschist facies overprint. This long-lasting retrograde evolution of the EUZ was caused by the lack of postcollisional collapse. Heat for a “deep-later" type of metamorphism and triggering the auriferous fluid system was supplied by radiogenic heating of an overthickened crust. The greenschist facies overprint at Kochkar and coeval crustal melting in the EUZ was additionally initiated by local external heating of the terrane. This could have been caused by syn- to postcollisional slab rollback or delamination resulting in magmatic underplating of the EUZ, which postdates orogenic gold mineralization at Kochkar. The tectonic interpretation of the EUZ indicates that gold mineralization at Kochkar formed in a mid-crustal environment of a continental magmatic arc at the cessation of active subduction predating post orogenic plutonism.  相似文献   

Two stages of gold mineralization at Hutti mine, India     

A. J. Rogers  J. Kolb  F. M. Meyer  T. Vennemann 《Mineralium Deposita》2013,48(1):99-114

The Hutti gold mine is located in a high-angle, NNW–SSE-trending shear zone system, which hosts nine discrete auriferous shear zones (reefs). On a clockwise, retrograde PT path two separate stages of deformation/metamorphism (D₂/M₂ and D₃/M₃) occurred synchronous with two distinct stages of gold mineralization, both of which were associated with different fluid types. Stage 1 mineralization developed during D₂/M₂, where the amphibolite host rocks were altered by a metamorphic fluid with a $ {{\delta }^{{18}}}{{O}_{{{{H}_2}O}}} $ of 7.5–10.1?‰, rich in K, S, As, and Au at pressure and temperature conditions of around 3 kbar and 530?+?20/?30°C, respectively. The stage 1 auriferous shear zones are enveloped by a zoned alteration consisting of a distal biotite–chlorite and proximal biotite–plagioclase assemblage. Subsequently, D₂/M₂ was overprinted by D₃/M₃ deformation and metamorphism at 300–400°C and <2 kbar that formed the stage 2 mineralization. The stage 2 mineralizing fluid which originated from outside the greenstone belt (δ¹⁸O_fluid of 3.2–6.8?‰) was rich in Si, Au, and W. This mineralization stage is distinct by the emplacement of laminated quartz veins central to the shear zone, containing locally visible gold at concentrations of up to 1 kg Au/t. The laminated quartz veins are surrounded by a millimeter-scale chlorite₂–K-feldspar alteration halo, which replaced the stage 1 biotite–plagioclase assemblage. The oxygen isotopic composition of the stage 2 fluid suggests a mixture of a magmatic fluid with an oxygen isotopic composition in the range of 6 to 10?‰ and an isotopically light formation fluid that resulted from fluid–rock interaction in the greenstone pile. The two fluid fluxes at stages 1 and 2 both contributed to the overall gold mineralization; however, it was the second fluid pulse, which gave the Hutti mine its status as the largest gold mine in India. The metamorphic evolution was thereby important for the first stage, whereas the second stage was controlled by tectonism and intrusion of the high-heat production Yellagatti granite that re-established the fluid plumbing and mineralizing system.  相似文献   

Governing cities through participation—a Foucauldian analysis of CityPlan Vancouver     

Marit Rosol 《Urban geography》2013,34(2):256-276

In 1995 Vancouver City Council approved new policy guidelines for future urban development that departed from the traditional model of suburban growth, instead prioritizing urban intensification. Theoretically guided by the Foucauldian governmentality approach, I argue in this paper that this shift towards intensification can be understood through an analysis of Vancouver’s extensive participatory planning process known as CityPlan. Created as an answer to conflicts around the intensification of historically evolved urban neighbourhoods, CityPlan Vancouver exemplifies a specific form of urban governance that has been understudied in geography and participation research: a governance consisting of conducting the conduct of citizens through participatory processes. The paper examines this “governing through participation” by carrying out a microanalysis of the problematizations, rationalities, and technologies of CityPlan. Such an analysis differs significantly from an evaluation of participatory planning processes against normative ideals, and thus enriches critical research on participation in urban governance.  相似文献