A method of artificial generation of earthquake ground motion     

Masahiko Kimura  Masanori Izumi 《地震工程与结构动力学》1989,18(6):867-874

  相似文献   

Regional metamorphism and hydrothermal alteration related to Miocene submarine volcanism ('green tuff') in the Yurihara oil and gas field, northwest Honshu Island, Japan     

Masahiko  Yagi 《Island Arc》1993,2(4):240-261

Abstract Alteration of reservoir rocks in the Yurihara Oil and Gas Field, hereafter referred to as the ‘Yurihara field’, have been examined by using samples from six wells. These rocks are basalts in the lowermost part of the basin-fills (‘green tuff’ Formation). These basalts were produced in many eruptions in a submarine environment during the early to middle Miocene, and they underwent continuous intensive alteration genetically associated with Miocene submarine volcanism. The alteration of the basalts is of two types: low grade metamorphism and hydrothermal. The former belongs to the type of ocean floor metamorphism and comprises two subgroups: zeolite (zone I) and prehnite-pumpellyite (zones IIa: vein and amygdule occurrence, and IIb: replacing plagioclase). The latter is characterized by potassic metasomatism accompanied by adularia, quartz and calcite veins (zones IIIa: center and IIIb: margin of the metasomatism). This overprints the low grade metamorphic alteration. The central zone of hydrothermal alteration coincides with a major estimated fault, so that fluids probably assent along the fault. The basalts erupted during 16.5-15.5 Ma, determined by planktonic foraminifera assemblages of inter-bedded shales, then underwent successive low grade metamorphism. In time, the hydrothermal alteration that overprints low grade metamorphism occurred. Adularia veins of the altered rocks located in the hydrothermal alteration zones (zone IIIa and IIIb) have been dated as 9 Ma determined by the K-Ar method. This fact indicates that the activity of low grade metamorphism had already crossed the peak before hydrothermal alteration occurred at 9 Ma. The shape of isotherms of fluid inclusion homogenization temperatures (Th) and that of isolines of apparent salinity (Tm) almost coincide with each other, and these also coincide with the distribution of hydrothermal alteration (zones IIIa and IIIb). This indicates that the fluid inclusions formed at the same time as ascending fluids produced the potassic metasomatism. The maximum Th of the fluid inclusions is 222°C and Tm indicates trapped fluids of up to 3.3 wt% equivalent NaCl (i.e. almost the same as seawater). A Th versus Tm plot indicates mixing occurred between hydrothermal fluids and formation water that has low salinity. Corrensite and chlorite form veins, and the temperatures of their formation, estimated by the extent of aluminium substitution into the tetrahedral site of chlorite, ranges between 165 and 245°C in the centre of the hydrothermal alteration zone (zone IIIa). This is consistent with the result of Th analyses. The deposition temperature of chlorite associated with prehnite in veins ranges between 190 and 215°C in zones IIa and IIb.  相似文献   

Reducing hillslope size in digital elevation models at various scales and the effects on slope gradient estimation     

Chatchai Tantasirin  Masahiko Nagai  Taravudh Tipdecho  Nitin K. Tripathi 《国际地球制图》2016,31(2):140-157

Several models simulate watershed areas by delineating hillslopes. Hillslope size depends on the length of stream tributaries, which are affected by the drainage area threshold (DAT). There is no universal approach to identify the appropriate DAT. Therefore, a method to derive the DAT and a series of steps to delineate a watershed into smaller sizes were proposed in this study, and the impact of hillslope size on slope gradient estimation was investigated. The DAT obtained in this study was smaller than that obtained using other methods, resulting in a shorter length of the tributaries. Dividing these tributaries into equal short segments and using them to delineate the study area reduced the size of the hillslope. The results revealed that the shorter the length of the tributaries, the smaller the hillslope size. The accuracy of gradient estimation increased when the size of the hillslope was reduced.  相似文献   

Mineral chemistry of MUSES‐C Regio inferred from analysis of dust particles collected from the first‐ and second‐touchdown sites on asteroid Itokawa     

Tomoki Nakamura  Aiko Nakato  Hatsumi Ishida  Shigeru Wakita  Takaaki Noguchi  Michael E. Zolensky  Masahiko Tanaka  Makoto Kimura  Akira Tshuchiyama  Toshihiro Ogami  Takahito Hashimoto  Mitsuru Konno  Masayuki Uesugi  Toru Yada  Kei Shirai  Akio Fujimura  Ryuji Okazaki  Scott. A. Sandford  Yukihiro Ishibashi  Masanao Abe  Tatsuaki Okada  Munetaka Ueno  Junichiro Kawaguchi 《Meteoritics & planetary science》2014,49(2):215-227

The mineralogy and mineral chemistry of Itokawa dust particles captured during the first and second touchdowns on the MUSES‐C Regio were characterized by synchrotron‐radiation X‐ray diffraction and field‐emission electron microprobe analysis. Olivine and low‐ and high‐Ca pyroxene, plagioclase, and merrillite compositions of the first‐touchdown particles are similar to those of the second‐touchdown particles. The two touchdown sites are separated by approximately 100 meters and therefore the similarity suggests that MUSES‐C Regio is covered with dust particles of uniform mineral chemistry of LL chondrites. Quantitative compositional properties of 48 dust particles, including both first‐ and second‐touchdown samples, indicate that dust particles of MUSES‐C Regio have experienced prolonged thermal metamorphism, but they are not fully equilibrated in terms of chemical composition. This suggests that MUSES‐C particles were heated in a single asteroid at different temperatures. During slow cooling from a peak temperature of approximately 800 °C, chemical compositions of plagioclase and K‐feldspar seem to have been modified: Ab and Or contents changed during cooling, but An did not. This compositional modification is reproduced by a numerical simulation that modeled the cooling process of a 50 km sized Itokawa parent asteroid. After cooling, some particles have been heavily impacted and heated, which resulted in heterogeneous distributions of Na and K within plagioclase crystals. Impact‐induced chemical modification of plagioclase was verified by a comparison to a shock vein in the Kilabo LL6 ordinary chondrite where Na‐K distributions of plagioclase have been disturbed.  相似文献   

Space weathered rims found on the surfaces of the Itokawa dust particles     

Takaaki Noguchi  Makoto Kimura  Takahito Hashimoto  Mitsuru Konno  Tomoki Nakamura  Michael E. Zolensky  Ryuji Okazaki  Masahiko Tanaka  Akira Tsuchiyama  Aiko Nakato  Toshinori Ogami  Hatsumi Ishida  Ryosuke Sagae  Shinichi Tsujimoto  Toru Matsumoto  Junya Matsuno  Akio Fujimura  Masanao Abe  Toru Yada  Toshifumi Mukai  Munetaka Ueno  Tatsuaki Okada  Kei Shirai  Yukihiro Ishibashi 《Meteoritics & planetary science》2014,49(2):188-214

On the basis of observations using Cs‐corrected STEM, we identified three types of surface modification probably formed by space weathering on the surfaces of Itokawa particles. They are (1) redeposition rims (2–3 nm), (2) composite rims (30–60 nm), and (3) composite vesicular rims (60–80 nm). These rims are characterized by a combination of three zones. Zone I occupies the outermost part of the surface modification, which contains elements that are not included in the unchanged substrate minerals, suggesting that this zone is composed of sputter deposits and/or impact vapor deposits originating from the surrounding minerals. Redeposition rims are composed only of Zone I and directly attaches to the unchanged minerals (Zone III). Zone I of composite and composite vesicular rims often contains nanophase (Fe,Mg)S. The composite rims and the composite vesicular rims have a two‐layered structure: a combination of Zone I and Zone II, below which Zone III exists. Zone II is the partially amorphized zone. Zone II of ferromagnesian silicates contains abundant nanophase Fe. Radiation‐induced segregation and in situ reduction are the most plausible mechanisms to form nanophase Fe in Zone II. Their lattice fringes indicate that they contain metallic iron, which probably causes the reddening of the reflectance spectra of Itokawa. Zone II of the composite vesicular rims contains vesicles. The vesicles in Zone II were probably formed by segregation of solar wind He implanted in this zone. The textures strongly suggest that solar wind irradiation damage and implantation are the major causes of surface modification and space weathering on Itokawa.  相似文献   

High‐pressure polymorphs in Yamato‐790729 L6 chondrite and their significance for collisional conditions          下载免费PDF全文

Yukako Kato  Toshimori Sekine  Masahiko Kayama  Masaaki Miyahara  Akira Yamaguchi 《Meteoritics & planetary science》2017,52(12):2570-2585

Shock pressure recorded in Yamato (Y)‐790729, classified as L6 type ordinary chondrite, was evaluated based on high‐pressure polymorph assemblages and cathodoluminescence (CL) spectra of maskelynite. The host‐rock of Y‐790729 consists mainly of olivine, low‐Ca pyroxene, plagioclase, metallic Fe‐Ni, and iron‐sulfide with minor amounts of phosphate and chromite. A shock‐melt vein was observed in the hostrock. Ringwoodite, majorite, akimotoite, lingunite, tuite, and xieite occurred in and around the shock‐melt vein. The shock pressure in the shock‐melt vein is about 14–23 GPa based on the phase equilibrium diagrams of high‐pressure polymorphs. Some plagioclase portions in the host‐rock occurred as maskelynite. Sixteen different CL spectra of maskelynite portions were deconvolved using three assigned emission components (centered at 2.95, 3.26, and 3.88 eV). The intensity of emission component at 2.95 eV was selected as a calibrated barometer to estimate shock pressure, and the results indicate pressures of about 11–19 GPa. The difference in pressure between the shock‐melt vein and host‐rock might suggest heterogeneous shock conditions. Assuming an average shock pressure of 18 GPa, the impact velocity of the parent‐body of Y‐790729 is calculated to be ~1.90 km s^?1. The parent‐body would be at least ~10 km in size based on the incoherent formation mechanism of ringwoodite in Y‐790729.  相似文献   

40Ar/39Ar geochronology of mafic rocks from the granite—rhyolite terrane of southeastern Missouri     

Masahiko Honda  Paul J. Sylvester  Frank A. Podosek  Klaus J. Schulz 《Precambrian Research》1985,27(4):301-306

The predominant 1480 Ma granites and rhyolites of the St. Francois Mountains, southeastern Missouri, are intruded by mafic rocks. A ⁴⁰Ar—³⁹Ar study of some of these, the Skrainka Mafic Group, indicates an age of ～ 1240 Ma, significantly younger than the host rocks, significantly older than Grenville/Keweenawan age, and close to the age of similar rocks in Labrador.  相似文献   

⁴⁰Ar—³⁹Ar ages of guyots in the western Pacific and discussion of their evolution     

M. Ozima  Masahiko Honda  K. Saito 《Geophysical Journal International》1977,51(2):475-485

Summary. Six submarine rocks dredged from guyots in the western Pacific were dated by means of ⁴⁰Ar–³⁹Ar step heating dating technique. All ages show mid- to late-Cretaceous ages in accordance with the generally supposed age of the ocean crust estimated from the magnetic anomaly pattern.
The back-tracked paths were calculated for the guyots with the use of their absolute ages, for both the Pacific plate movements proposed by Morgan and by Clague & Jarrard. In both cases these show birth places for the guyots, which are located near the equator.
Fossil ages are nearly concordant with the ⁴⁰Ar–³⁹Ar ages for the guyots which are older than 95 Myr, whereas the fossil ages are considerably younger than the ⁴⁰Ar–³⁹Ar ages for the guyots younger than 90 Myr. This contrast may be due to the world-wide marine transgression, whose climax is believed to have occurred at about 85 Myr BP.  相似文献   

Influence of submarine fumaroles on the distribution of mercury in the sediment of Kagoshima Bay,Japan     

Takashi Tomiyasu  Tomomi Eguchi  Masahiko Yamamoto  Katsuro Anazawa  Hayao Sakamoto  Tetsuo Ando  Munetomo Nedachi  Katsumi Marumo 《Marine Chemistry》2007

To estimate the influence of mercury emitted from submarine fumaroles, the horizontal and vertical distribution of mercury in sediment of Kagoshima Bay was studied. The fumaroles are located in the northern bay head area, and the sediment samples had been taken from 52 points throughout the bay with a gravity core sampler. The core samples obtained were cut at a thickness of 1–2 cm and used for measurements. The total concentration of mercury in surface sediment in the northern and central areas of the bay was 51–679 μg kg^− 1 (average 199 μg kg^− 1, n = 22) and 23–100 μg kg^− 1 (average 55 μg kg^− 1, n = 30), respectively. The highest value was obtained in the vicinity of the fumaroles. The mercury concentration in sediment near the fumaroles varied with depth, which may reflect the variation in fumarolic activity. A successive extraction method was applied to the speciation of mercury in the sediment. The results showed that sediment taken in the vicinity of submarine fumaroles contained a higher percentage of mercury bound with organic matter.  相似文献   

Towed ADCP fish with Depth and Roll controllable wings and its application to the Kuroshio observation     

Arata Kaneko  Noriaki Gohda  Wataru Koterayama  Masahiko Nakamura  Shinjiro Mizuno  Hirohito Furukawa 《Journal of Oceanography》1993,49(4):383-395

An intelligent ADCP (Acoustic Doppler Current Profiler) fish, called DRAKE (Depth and Roll Adjustable Kite for Energy flux measurements) was developed with the controllable wings which can adjust the submerging depth of the fish and stabilize its roll motion. The Kuroshio west of Okinawa was measured in a roundtrip course on the same traverse line by the ADCP fish. The forward survey obtained the maximum submerging depth of 208 m at a fish operation speed of 2.9 ms^–1. The maximum fish speed of 5.4 ms^–1 was achieved at a submerging depth of 48 m in the return survey. The data in the overlapped area of data acquisition between depths 212 and 276 m were used to examine the accuracy of velocity measurement for the towed ADCP system. The summation of both survey data made it possible to estimate a sectional velocity structure and transport of the upper 600 m corresponding roughly to the whole section of the Kuroshio in this region.  相似文献