Estimates of the γ-ray flux from Sagittarius A     

Laura Maraschi  Massimo Tarenghi  Aldo Treves 《Astrophysics and Space Science》1970,8(1):12-19

Analysis of the anisotropy of the -ray background observed by Clarket al. (1968) has lead to the suggestion that part of the anisotropy be due to a source at the Galactic Centre. The complex structure of radio and infrared emission of the region of Sgr A is considered. The -ray flux arising from Compton scattering and ₀ decay is calculated. For a value of the magnetic field H10^–4 Gauss, corresponding to equipartition, the -ray flux above 100 MeV at Earth from the Sgr A source is expected to lie between 10^–6 and 10^–5 gamma/cm² sec. Such a source should be detectable in the near future.  相似文献   

Mineral zoning and gold occurrence in the Fortuna skarn mine, Nambija district, Ecuador   总被引：1，自引：0，他引：1  

Agnès Markowski  Jean Vallance  Massimo Chiaradia  Lluìs Fontboté 《Mineralium Deposita》2006,41(4):301-321

The Fortuna oxidized gold skarn deposit is located in the northern part of the Nambija gold district, southern Ecuador. It has been subdivided into four mineralized sites, covering a distance of 1 km, which are named from north to south: Cuerpo 3, Mine 1, Mine 2, and Southern Sector. Massive skarn bodies occur in K–Na metasomatized volcanic and volcaniclastic rocks of the Triassic Piuntza unit. They appear to result from selective replacement of volcaniclastic rocks. Very minor presence of bioclast relicts suggests the presence of subordinate limestone. Endoskarn type alteration with development of Na-rich plagioclase, K-feldspar, epidote, actinolite, anhedral pyroxene, and titanite affects a quartz–diorite porphyritic intrusion which crops out below the skarn bodies in Mine 2 and the Southern Sector. Endoskarn alteration in the intrusion grades into a K-feldspar ± biotite ± magnetite assemblage (K-alteration), suggesting that skarn formation is directly related to the quartz–diorite porphyritic intrusion, the latter being probably emplaced between 141 and 146 Ma. The massive skarn bodies were subdivided into a dominant brown garnet skarn, a distal green pyroxene–epidote skarn, and two quartz-rich varieties, a blue-green garnet skarn and light green pyroxene–garnet skarn, which occur as patches and small bodies within the former skarn types. The proximal massive brown garnet skarn zone is centered on two 060° trending faults in Mine 2, where the highest gold grades (5–10 g/t) were observed. It grades into a distal green pyroxene–epidote skarn zone to the North (Cuerpo 3). Granditic garnet shows iron enrichment from the proximal to the distal zone. Diopsidic pyroxene exhibits iron and manganese enrichment from proximal to distal zones. The retrograde stage is weakly developed and consists mainly of mineral phases filling centimeter-wide veins, vugs, and interstices between garnet and pyroxene grains. The main filling mineral is quartz, followed by K-feldspar, epidote, calcite, and chlorite, with minor sericite, apatite, titanite, hematite, pyrite, chalcopyrite, and gold. Metal and sulfur contents are low at Fortuna, and the highest gold grades coincide with high hematite abundance, which suggests that retrograde stage and gold deposition took place under oxidizing conditions. Fluid inclusions from pyroxene indicate precipitation from high temperature—high to moderate salinity fluids (400 to 460°C and 54- to 13-wt% eq. NaCl), which result probably from boiling of a moderately saline (∼8-wt% eq. NaCl) magmatic fluid. Later cooler (180 to 475°C) and moderate to low saline fluids (1- to 20-wt% eq. NaCl) were trapped in garnet, epidote, and quartz, and are interpreted to be responsible for gold deposition. Chlorite analysis indicates temperature of formation between 300 and 340°C in accordance with fluid inclusion data. It appears, thus, that gold was transported as chloride complexes under oxidizing conditions and was deposited at temperatures around 300°C when transport of chloride complexes as gold carriers is not efficient.  相似文献   

Disturbance, stream incision, and channel evolution: The roles of excess transport capacity and boundary materials in controlling channel response   总被引：4，自引：0，他引：4  

Andrew Simon  Massimo Rinaldi 《Geomorphology》2006,79(3-4):361

Channel incision is part of denudation, drainage-network development, and landscape evolution. Rejuvenation of fluvial networks by channel incision often leads to further network development and an increase in drainage density as gullies migrate into previously non-incised surfaces. Large, anthropogenic disturbances, similar to large or catastrophic “natural” events, greatly compress time scales for incision and related processes by creating enormous imbalances between upstream sediment delivery and available transporting power. Field examples of channel responses to antrhopogenic and “natural” disturbances are presented for fluvial systems in the mid continent and Pacific Northwest, USA, and central Italy. Responses to different types of disturbances are shown to result in similar spatial and temporal trends of incision for vastly different fluvial systems. Similar disturbances are shown to result in varying relative magnitudes of vertical and lateral (widening) processes, and different channel morphologies as a function of the type of boundary sediments comprising the bed and banks. This apparent contradiction is explained through an analysis of temporal adjustments to flow energy, shear stress, and stream power with time. Numerical simulations of sand-bed channels of varying bank resistance and disturbed by reducing the upstream sediment supply by half, show identical adjustments in flow energy and the rate of energy dissipation. The processes that dominate adjustment and the ultimate stable geometries, however, are vastly different, depending on the cohesion of the channel banks and the supply of hydraulically-controlled sediment (sand) provided by bank erosion.The non-linear asymptotic nature of fluvial adjustment to incision caused by channelization or other causes is borne out in similar temporal trends of sediment loads from disturbed systems. The sediments emanating from incised channels can represent a large proportion of the total sediment yield from a landscape, with erosion from the channel banks generally the dominant source. Disturbances that effect available force, stream power or flow energy, or change erosional resistance such that an excess of flow energy occurs can result in incision. Channel incision, therefore, can be considered a quintessential feature of dis-equilibrated fluvial systems.  相似文献   

U‐Pb Detrital Zircon Analysis – Results of an Inter‐laboratory Comparison     

Jan Košler  Jiří Sláma  Elena Belousova  Fernando Corfu  George E. Gehrels  Axel Gerdes  Matthew S. A. Horstwood  Keith N. Sircombe  Paul J. Sylvester  Massimo Tiepolo  Martin J. Whitehouse  Jon D. Woodhead 《Geostandards and Geoanalytical Research》2013,37(3):243-259

Inter‐laboratory comparison of laser ablation ICP‐MS and SIMS U‐Pb dating of synthetic detrital zircon samples provides an insight into the state‐of‐the art of sedimentary provenance studies. Here, we report results obtained from ten laboratories that routinely perform this type of work. The achieved level of bias was mostly within ± 2% relative to the ID‐TIMS U‐Pb ages of zircons in the detrital sample, and the variation is likely to be attributed to variable Pb/U elemental fractionation due to zircon matrix differences between the samples and the reference materials used for standardisation. It has been determined that ~ 5% age difference between adjacent age peaks is currently at the limit of what can be routinely resolved by the in situ dating of detrital zircon samples. Precision of individual zircon age determination mostly reflects the data reduction and procedures of measurement uncertainty propagation, and it is largely independent of the instrumentation, analytical technique and reference samples used for standardisation. All laboratories showed a bias towards selection of larger zircon grains for analysis. The experiment confirms the previously published estimates of the minimum number of grains that have to be analysed in order to detect minor zircon age populations in detrital samples.  相似文献   

Integrated use of archival aerial photogrammetry,GNSS, and InSAR data for the monitoring of the Patigno landslide (Northern Apennines,Italy)     

Cenni  Nicola  Fiaschi  Simone  Fabris  Massimo 《Landslides》2021,18(6):2247-2263

Landslides - The morphological changes of unstable areas can be identified using different methodologies that allow repeated surveys over time. The integration between the data obtained from...  相似文献   

Iron release in aqueous environment by fresh volcanic ash from Mount Etna (Italy) and Popocatépetl (Mexico) volcanoes     

Giancarlo Capitani  Nobuyoshi Miyajima  Roberto Sulpizio  Maria D’Addabbo  Lucia Galimberti  Massimo Guidi  Giovanni B. Andreozzi 《Environmental Earth Sciences》2018,77(13):521

In this study, we performed leaching experiments for timescales of hours-to-months in deionized water on fresh volcanic ash from Mt. Etna (Italy) and Popocatépetl (Mexico) volcanos to monitor Fe release as a function of ash mineral chemistry and size, with the aim of clarifying Fe release mechanisms and eventually evaluating the impact of volcanic ash on marine and lacustrine environments. To define sample mineralogy and Fe speciation, inclusive characterization was obtained by means of XRF, SEM, XRPD, EELS and Mössbauer spectroscopies. For Etna and Popocatépetl samples, glass proportions were quantified at 73 and 40%, Fe₂O₃ total contents at 11.6–13.2 and 5.8 wt%, and Fe³⁺/Fe_Tot ratios at 0.33 and 0.23, respectively. Leaching experiments showed that significant amounts of iron, ~?30 to 150 and ~?750 nmol g^?1 l^?1 for pristine Etna and Popocatépetl samples, respectively, are released within the first 30 min as a function of decreasing particle size (from 1 to 0.125 mm). The Popocatépetl sample showed a very sustained Fe release (up to 10 times Etna samples) all along the first week, with lowest values never below 400 nmol g^?1 l^?1 and a maximum of 1672 nmol g^?1 l^?1 recorded after 5 days. This sample, being composed of very small particles (average particle size 0.125 mm) with large surface area, likely accumulated large quantities of Fe-bearing sublimates that quickly dissolved during leaching tests, determining high Fe release and local pH decrease (that contributed to release more Fe from the glass) at short timescale (hours-to-days). The fractional Fe solubility (Fe_S) was 0.004–0.011 and 0.23% for Etna and Popocatépetl samples, respectively, but no correlation was found between Fe released in solution and either ash Fe content, glass/mineral ratio or mineral assemblage. Results obtained suggest that volcanic ash chemistry, mineralogy and particle size assume a relevant role on Fe release mostly in the medium-to-long timescale, while Fe release in the short timescale is dominated by dissolution of surface sublimates (formed by physicochemical processes occurring within the eruption plume and volcanic cloud) and the effects of such a dissolution on the local pH conditions. For all samples, a moderate to sustained Fe release occurred for leaching times comparable with their residence time within the euphotic zone of marine and lacustrine environments (variable from few minutes to few hours), revealing their possible contribution to increase Fe bioavailability.  相似文献   

Harmonization vs. fragmentation: overview of climate policy scenarios in EMF27     

Geoffrey J. Blanford  Elmar Kriegler  Massimo Tavoni 《Climatic change》2014,123(3-4):383-396

This paper synthesizes results of the multi-model Energy Modeling Forum 27 (EMF27) with a focus on climate policy scenarios. The study included two harmonized long-term climate targets of 450 ppm CO₂-e (enforced in 2100) and 550 pm CO₂-e (not-to-exceed) as well as two more fragmented policies based on national and regional emissions targets. Stabilizing atmospheric GHG concentrations at 450 and 550 ppm CO₂-e requires a dramatic reduction of carbon emissions compared to baseline levels. Mitigation pathways for the 450 CO₂-e target are largely overlapping with the 550 CO₂-e pathways in the first half of the century, and the lower level is achieved through rapid reductions in atmospheric concentrations in the second half of the century aided by negative anthropogenic carbon flows. A fragmented scenario designed to extrapolate current levels of ambition into the future falls short of the emissions reductions required under the harmonized targets. In a more aggressive scenario intended to capture a break from observed levels of stringency, emissions are still somewhat higher in the second half due to unabated emissions from non-participating countries, emphasizing that a phase-out of global emissions in the long term can only be reached with full global participation. A key finding is that a large range of energy-related CO₂ emissions can be compatible with a given long-term target, depending on assumptions about carbon cycle response, non-CO₂ and land use CO₂ emissions abatement, partly explaining the spread in mitigation costs.  相似文献   

Hydraulics and Hydrology in Mountain Areas     

Massimo GRECO 《山地科学学报》2014,(6):1383-1384

<正>The 35th IAHR World Congress was held in Chengdu,China from September 8 to September 132013.The title of the conference was:"The Wise Finds Pleasure in Water:Meandering through Water Science and Engineering".During the congress,1239 papers were presented in 139sessions for oral presentations and 7 sessions for poster presentations.After the Congress,a Committee was appointed to select some of the best papers presented at the Congress for publication,after a  相似文献   

Application and validation of bivariate GIS-based landslide susceptibility assessment for the Vitravo river catchment (Calabria,south Italy)   总被引：3，自引：1，他引：2  

Massimo Conforti  Gaetano Robustelli  Francesco Muto  Salvatore Critelli 《Natural Hazards》2012,61(1):127-141

The Calabria (Southern Italy) region is characterized by many geological hazards among which landslides, due to the geological, geomorphological, and climatic characteristics, constitute one of the major cause of significant and widespread damage. The present work aims to exploit a bivariate statistics-based approach for drafting a landslide susceptibility map in a specific scenario of the region (the Vitravo River catchment) to provide a useful and easy tool for future land planning. Landslides have been detected through air-photo interpretation and field surveys, by identifying both the landslide detachment zones (LDZ) and landslide bodies; a geospatial database of predisposing factors has been constructed using the ESRI ArcView 3.2 GIS. The landslide susceptibility has been assessed by computing the weighting values (Wi) for each class of the predisposing factors (lithology, proximity to fault and drainage line, land use, slope angle, aspect, plan curvature), thus evaluating the distribution of the landslide detachment zones within each class. The extracted predisposing factors maps have then been re-classified on the basis of the calculated weighting values (Wi) and by means of overlay processes. Finally, the landslide susceptibility map has been considered by five classes. It has been determined that a high percentage (61%) of the study area is characterized by a high to very high degree of susceptibility; clay and marly lithologies, and slope exceeding 20° in inclination would be much prone to landsliding. Furthermore, in order to ascertain the proposed landslide susceptibility estimate, a validation procedure has been carried out, by splitting the landslide detachment zones into two groups: a training and a validation set. By means of the training set, the susceptibility map has first been produced; then, it has been compared with the validation set. As a result, a great majority of LDZ-validation set (85%) would be located in highly and very highly susceptible areas. The predictive power of the model is considered reliable, since more than 50% of the LDZ fall into 20% of the most susceptible areas. The reliability of the susceptibility map is also suggested by computing the SCAI index, true positive and false positive rates; nevertheless, the most susceptible areas are overestimated. As a whole, the results indicate that landslide susceptibility assessment based on a bivariate statistics-based method in a GIS environment may be useful for land planning policy, especially when considering its cost/benefit ratio and the need of using an easy tool.  相似文献   

Coexistence of abyssal and ultra-depleted SSZ type mantle peridotites in a Neo-Tethyan Ophiolite in SW Turkey: Constraints from mineral composition,whole-rock geochemistry (major–trace–REE–PGE), and Re–Os isotope systematics     

İbrahim Uysal  E. Yalçın Ersoy  Orhan Karslı  Yildirim Dilek  M. Burhan Sadıklar  Chris J. Ottley  Massimo Tiepolo  Thomas Meisel 《Lithos》2012

We present new, whole-rock major and trace element chemistry, including rare earth elements (REE), platinum-group elements (PGE), and Re–Os isotope data from the upper mantle peridotites of a Cretaceous Neo-Tethyan ophiolite in the Mu?la area in SW Turkey. We also report extensive mineral chemistry data for these peridotites in order to better constrain their petrogenesis and tectonic environment of formation. The Mu?la peridotites consist mainly of cpx-harzburgite, depleted harzburgite, and dunite. Cpx-harzburgites are characterized by their higher average CaO (2.27 wt.%), Al₂O₃ (2.07 wt.%), REE (53 ppb), and ¹⁸⁷Os/¹⁸⁸Os_(i) ratios varying between 0.12497 and 0.12858. They contain Al-rich pyroxene with lower Cr content of coexisting spinel (Cr# = 13–22). In contrast, the depleted harzburgites and dunites are characterized by their lower average CaO (0.58 wt.%), Al₂O₃ (0.42 wt.%), and REE (1.24 ppb) values. Their clinopyroxenes are Al-poor and coexist with high-Cr spinel (Cr# = 33–83). The ¹⁸⁷Os/¹⁸⁸Os_(i) ratios are in the range of 0.12078–0.12588 and are more unradiogenic compared to those of the cpx-harzburgites.Mineral chemistry and whole rock trace and PGE data indicate that formation of the Mu?la peridotites cannot be explained by a single stage melting event; at least two-stages of melting and refertilization processes are needed to explain their geochemical characteristics. Trace element compositions of the cpx-harzburgites can be modeled by up to ~ 10–16% closed-system dynamic melting of a primitive mantle source, whereas those of the depleted harzburgites and dunites can be reproduced by ~ 10–16% open-system melting of an already depleted (~ 16%) mantle. These models indicate that the cpx-harzburgites are the products of first-stage melting and low-degrees of melt–rock interaction that occurred in a mid-ocean ridge (MOR) environment. However, the depleted harzburgites and dunites are the product of second-stage melting and related refertilization which took place in a supra subduction zone (SSZ) environment. The Re–Os isotope systematics of the Mu?la peridotites gives model age clusters of ~ 250 Ma, ~ 400 Ma and ~ 750 Ma that may record major tectonic events associated with the geodynamic evolution of the Neo-Tethyan, Rheic, and Proto-Tethyan oceans, respectively. Furthermore, > 1000 Ma model ages can be interpreted as a result of an ancient melting event before the Proto-Tethys evolution.  相似文献