Processing and quality control of flux data during LITFASS-2003   总被引：1，自引：0，他引：1  

Matthias Mauder  Claudia Liebethal  Mathias Göckede  Jens-Peter Leps  Frank Beyrich  Thomas Foken 《Boundary-Layer Meteorology》2006,121(1):67-88

Different aspects of the quality assurance and quality control (QA/QC) of micrometeorological measurements were combined to create a comprehensive algorithm which was then applied to experimental data from LITFASS-2003 (Lindenberg Inhomogeneous Terrain—Fluxes between Atmosphere and Surface: a long term Study). Eddy-covariance measurements of the latent heat flux were the main focus of the QA/QC efforts. The results of a turbulence sensor intercomparison experiment showed deviations between the different eddy-covariance systems on the order of 15%, or less than 30 W m⁻², for the latent heat flux and 5%, or less than 10 W m⁻², for the sensible heat flux. In order to avoid uncertainties due to the post-processing of turbulence data, a comprehensive software package was used for the analysis of experimental data from LITFASS-2003, including all necessary procedures for corrections and quality control. An overview of the quality test results shows that for most of the days more than 80% of the available latent heat flux data are of high quality so long as there are no instrumental problems. The representativeness of a flux value for the target land-use type was analysed using a stochastic footprint model. Different methods to calculate soil heat fluxes at the surface are discussed and a sensitivity analysis is conducted to select the most robust method for LITFASS-2003. The lack of energy balance closure, which was found for LITFASS-2003, can probably be attributed to the presence of low-frequency flux contributions that cannot be resolved with an averaging time of 30 min. Though the QA/QC system has been developed for the requirements of LITFASS-2003, it can also be applied to other experiments dealing with similar objectives.  相似文献   

Towards urbanisation of the non-hydrostatic numerical weather prediction model Lokalmodell (LM)     

Lina Neunhäuserer  Barbara Fay  Matthias Raschendorfer 《Boundary-Layer Meteorology》2007,124(1):81-97

Numerical weather prediction models are increasingly employed for providing meteorological data for urban air quality applications. Model resolution, physiographic parameters and surface-layer parameterisations need to be adapted to the requirements of the urban boundary layer. The Lokalmodell of the German Weather Service was triple-nested down to a horizontal grid resolution of 1.1 km, urbanised physiographic parameters were implemented, and an additional anthropogenic heat source was introduced. Results of a sensitivity study for a spring dust episode in Helsinki show a clear urbanisation effect of these measures on temperature, humidity and the partitioning of surface fluxes, leading to an increased Bowen ratio and heat storage and an urban heat island effect.  相似文献   

Bubble-induced porewater mixing: A 3-D model for deep porewater irrigation   总被引：1，自引：0，他引：1  

Matthias Haeckel  Bernard P. Boudreau 《Geochimica et cosmochimica acta》2007,71(21):5135-5154

Porewater data from vent sites of the northeastern shelf off Sakhalin Island, Sea of Okhotsk, exhibit bottom-water concentrations down to a sediment depth of up to 300 cm. Below this depth, solute concentrations rapidly change due to methanogenesis and anaerobic methane oxidation (AMO). The profile shapes suggest an irrigation-like process that mixes on a meter scale. At these sites active gas emanation into the overlying water column and near-surface gas hydrates are commonly observed. We propose that methane gas bubbles rise through the soft surface sediments and cause mixing of the porewater.Mathematically, the bubble-induced irrigation can be described by eddy diffusion enhancing the diffusive transport of solutes by several orders of magnitude. A 3-D numerical transport-reaction model was developed to investigate the parameters defining the mixing process, such as bubble rise velocity, tube size, tube distribution in the sediment, and ebullition frequency.Model consistency with the field data requires eddy diffusivities ?1 × 10⁵ cm²/a, tube densities of >4 tubes/m² (equivalent to a tube spacing of <40 cm), active gas seepage for more than a few weeks or months, and moderate to low diagenetic reaction rates of solutes. The corresponding methane gas fluxes that are predicted from the results of the model realizations range from 1 × 10³-5 × 10⁵ L/(m² a). Due to bubble mixing, solute fluxes in these sediments are increased by a factor of 3 and the maximum AMO rate by a factor of 7.  相似文献   

Long-term effects of anthropogenic CO<Subscript>2</Subscript> emissions simulated with a complex earth system model     

Uwe Mikolajewicz  Matthias Gröger  Ernst Maier-Reimer  Guy Schurgers  Miren Vizcaíno  Arne M. E. Winguth 《Climate Dynamics》2007,28(6):599-633

A new complex earth system model consisting of an atmospheric general circulation model, an ocean general circulation model, a three-dimensional ice sheet model, a marine biogeochemistry model, and a dynamic vegetation model was used to study the long-term response to anthropogenic carbon emissions. The prescribed emissions follow estimates of past emissions for the period 1751–2000 and standard IPCC emission scenarios up to the year 2100. After 2100, an exponential decrease of the emissions was assumed. For each of the scenarios, a small ensemble of simulations was carried out. The North Atlantic overturning collapsed in the high emission scenario (A2) simulations. In the low emission scenario (B1), only a temporary weakening of the deep water formation in the North Atlantic is predicted. The moderate emission scenario (A1B) brings the system close to its bifurcation point, with three out of five runs leading to a collapsed North Atlantic overturning circulation. The atmospheric moisture transport predominantly contributes to the collapse of the deep water formation. In the simulations with collapsed deep water formation in the North Atlantic a substantial cooling over parts of the North Atlantic is simulated. Anthropogenic climate change substantially reduces the ability of land and ocean to sequester anthropogenic carbon. The simulated effect of a collapse of the deep water formation in the North Atlantic on the atmospheric CO₂ concentration turned out to be relatively small. The volume of the Greenland ice sheet is reduced, but its contribution to global mean sea level is almost counterbalanced by the growth of the Antarctic ice sheet due to enhanced snowfall. The modifications of the high latitude freshwater input due to the simulated changes in mass balance of the ice sheet are one order of magnitude smaller than the changes due to atmospheric moisture transport. After the year 3000, the global mean surface temperature is predicted to be almost constant due to the compensating effects of decreasing atmospheric CO₂ concentrations due to oceanic uptake and delayed response to increasing atmospheric CO₂ concentrations before.  相似文献   

The energy balance experiment EBEX-2000. Part II: Intercomparison of eddy-covariance sensors and post-field data processing methods     

Matthias Mauder  Steven P. Oncley  Roland Vogt  Tamas Weidinger  Luis Ribeiro  Christian Bernhofer  Thomas Foken  Wim Kohsiek  Henk A. R. De Bruin  Heping Liu 《Boundary-Layer Meteorology》2007,123(1):29-54

The eddy-covariance method is the primary way of measuring turbulent fluxes directly. Many investigators have found that these flux measurements often do not satisfy a fundamental criterion—closure of the surface energy balance. This study investigates to what extent the eddy-covariance measurement technology can be made responsible for this deficiency, in particular the effects of instrumentation or of the post-field data processing. Therefore, current eddy-covariance sensors and several post-field data processing methods were compared. The differences in methodology resulted in deviations of 10% for the sensible heat flux and of 15% for the latent heat flux for an averaging time of 30 min. These disparities were mostly due to different sensor separation corrections and a linear detrending of the data. The impact of different instrumentation on the resulting heat flux estimates was significantly higher. Large deviations from the reference system of up to 50% were found for some sensor combinations. However, very good measurement quality was found for a CSAT3 sonic together with a KH20 krypton hygrometer and also for a UW sonic together with a KH20. If these systems are well calibrated and maintained, an accuracy of better than 5% can be achieved for 30-min values of sensible and latent heat flux measurements. The results from the sonic anemometers Gill Solent-HS, ATI-K, Metek USA-1, and R.M. Young 81000 showed more or less larger deviations from the reference system. The LI-COR LI-7500 open-path H₂O/CO₂ gas analyser in the test was one of the first serial numbers of this sensor type and had technical problems regarding direct solar radiation sensitivity and signal delay. These problems are known by the manufacturer and improvements of the sensor have since been made. The National Center for Atmospheric Research is supported by the National Science Foundation.  相似文献   

Quasi-isotropic approximation of ray theory for anisotropic media     

Matthias Zillmer  Boris Kashtan  & Dirk Gajewski 《Geophysical Journal International》1998,132(3):643-653

Wave propagation in weakly anisotropic inhomogeneous media is studied by the quasi-isotropic approximation of ray theory. The approach is based on the ray-tracing and dynamic ray-tracing differential equations for an isotropic background medium. In addition, it requires the integration of a system of two complex coupled differential equations along the isotropic ray.
The interference of the qS waves is described by traveltime and polarization corrections of interacting isotropic S waves. For qP waves the approach leads to a correction of the traveltime of the P wave in the isotropic background medium.
Seismograms and particle-motion diagrams obtained from numerical computations are presented for models with different strengths of anisotropy.
The equivalence of the quasi-isotropic approximation and the quasi-shear-wave coupling theory is demonstrated. The quasi-isotropic approximation allows for a consideration of the limit from weak anisotropy to isotropy, especially in the case of qS waves, where the usual ray theory for anisotropic media fails.  相似文献   

Tracing variability of run‐off generation in mountainous permafrost of semi‐arid north‐eastern Mongolia          下载免费PDF全文

Jens Lange  Benjamin Johannes Kopp  Matthias Bents  Lucas Menzel 《水文研究》2015,29(6):1046-1055

The headwaters of mountainous, discontinuous permafrost regions in north‐eastern Mongolia are important water resources for the semi‐arid country, but little is known about hydrological processes there. Run‐off generation on south‐facing slopes, which are devoid of permafrost, has so far been neglected and is totally unknown for areas that have been affected by recent forest fires. To fill this knowledge gap, the present study applied artificial tracers on a steppe‐vegetated south‐facing and on two north‐facing slopes, burned and unburned. Combined sprinkling and dye tracer experiments were used to visualize processes of infiltration and water fluxes in the unsaturated zone. On the unburned north‐facing slope, rapid and widespread infiltration through a wet organic layer was observed down to the permafrost. On the burned profile, rapid infiltration occurred through a combusted organic and underlying mineral layer. Stained water seeped out at the bottom of both profiles suggesting a general tendency to subsurface stormflow (SSF). Ongoing SSF could directly be studied 24 h after a high‐intensity rainfall event on a 55‐m hillslope section in the burned forest. Measurements of water temperature proved the role of the permafrost layer as a base horizon for SSF. Repeated tracer injections allowed direct insights into SSF dynamics: A first injection suggested rather slow dispersive subsurface flow paths; whereas 18 h later, a second injection traced a more preferential flow system with 20 times quicker flow velocities. We speculate that these pronounced SSF dynamics are limited to burned slopes where a thermally insulating organic layer is absent. On three south‐facing soil profiles, the applied tracer remained in the uppermost 5 cm of a silt‐rich mineral soil horizon. No signs of preferential infiltration could be found, which suggested reduced biological activity under a harsh, dry and cold climate. Instead, direct observations, distributed tracers and charcoal samples provided evidence for the occurrence of overland flow. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

Snow accumulation distribution inferred from time‐lapse photography and simple modelling     

Daniel Farinotti  Jan Magnusson  Matthias Huss  Andreas Bauder 《水文研究》2010,24(15):2087-2097

The spatial and temporal distribution of snow accumulation is complex and significantly influences the hydrological characteristics of mountain catchments. Many snow redistribution processes, such as avalanching, slushflow or wind drift, are controlled by topography, but their modelling remains challenging. In situ measurements of snow accumulation are laborious and generally have a coarse spatial or temporal resolution. In this respect, time‐lapse photography shows itself as a powerful tool for collecting information at relatively low cost and without the need for direct field access. In this paper, the snow accumulation distribution of an Alpine catchment is inferred by adjusting a simple snow accumulation model combined with a temperature index melt model to match the modelled melt‐out pattern evolution to the pattern monitored during an ablation season through terrestrial oblique photography. The comparison of the resulting end‐of‐winter snow water equivalent distribution with direct measurements shows that the achieved accuracy is comparable with that obtained with an inverse distance interpolation of the point measurements. On average over the ablation season, the observed melt‐out pattern can be reproduced correctly in 93% of the area visible from the fixed camera. The relations between inferred snow accumulation distribution and topographic variables indicate large scatter. However, a significant correlation with local slope is found and terrain curvature is detected as a factor limiting the maximal snow accumulation. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

Vegetation history and environmental development since ca 6000 cal yr BP in and around Ispani 2 (Kolkheti lowlands,Georgia)     

Pim de Klerk  Andreas Haberl  Andreas Kaffke  Matthias Krebs  Izolda Matchutadze  Merten Minke  Jenny Schulz  Hans Joosten 《Quaternary Science Reviews》2009,28(9-10):890-910

The Kolkheti lowlands of western Georgia have a unique vegetation and a rich cultural history. Palynological and macrofossil analysis accompanied by AMS ¹⁴C-dates of the deposits of the Ispani 2 mire near Kobuleti allow the reconstruction of regional vegetation, environmental history and local peatland development within the context of Black Sea level and cultural changes. Comparison of two adjacent peatland cores confirms spatial differences in wetland development. Prior to 5400 cal yr BP, the Ispani basin was a floodplain of an active river system where overbank deposits with fluvially transported Castanea pollen were deposited. Subsequently, a lake or lagoon developed in which reeds expanded. These were succeeded by herb-rich open alder carrs. After 1900 cal yr BP, Carpinus and Fagus expanded on the dry grounds, where formerly Quercus was more abundant. Also Castanea declined. Local reedbeds, that burned regularly, succeeded the alder carr. After 1000 cal yr BP, a percolation bog developed resulting in the formation of 4 m of loose, porous, and largely undecomposed Sphagnum austinii peat with Molinia roots. The upper 50 cm of the analysed section show extensive human impact on the landscape during the 20th century.  相似文献   

A composite Fe,Ni‐FeS and enstatite‐forsterite‐diopside‐glass vitrophyre clast in the Larkman Nunatak 04316 aubrite: Origin by pyroclastic volcanism     

Klaus KEIL  Timothy J. McCOY  Lionel WILSON  Jean‐Alix BARRAT  Doug RUMBLE  Matthias M. M. MEIER  Rainer WIELER  Gary R. HUSS 《Meteoritics & planetary science》2011,46(11):1719-1741

Abstract– We studied the mineralogy, petrology, and bulk, trace element, oxygen, and noble gas isotopic compositions of a composite clast approximately 20 mm in diameter discovered in the Larkman Nunatak (LAR) 04316 aubrite regolith breccia. The clast consists of two lithologies: One is a quench‐textured intergrowth of troilite with spottily zoned metallic Fe,Ni which forms a dendritic or cellular structure. The approximately 30 μm spacings between the Fe,Ni arms yield an estimated cooling rate of this lithology of approximately 25–30 °C s^?1. The other is a quench‐textured enstatite‐forsterite‐diopside‐glass vitrophyre lithology. The composition of the clast suggests that it formed at an exceptionally high degree of partial melting, perhaps approaching complete melting, and that the melts from which the composite clast crystallized were quenched from a temperature of approximately 1380–1400 °C at a rate of approximately 25–30 °C s^?1. The association of the two lithologies in a composite clast allows, for the first time, an estimation of the cooling rate of a silicate vitrophyre in an aubrite of approximately 25–30 °C s^?1. While we cannot completely rule out an impact origin of the clast, we present what we consider is very strong evidence that this composite clast is one of the elusive pyroclasts produced during pyroclastic volcanism on the aubrite parent body ( Wilson and Keil 1991 ). We further suggest that this clast was not ejected into space but retained on the aubrite parent body by virtue of the relatively large size of the clast of approximately 20 mm. Our modeling, taking into account the size of the clast, suggests that the aubrite parent body must have been between approximately 40 and 100 km in diameter, and that the melt from which the clast crystallized must have contained an estimated maximum range of allowed volatile mass fractions between approximately 500 and approximately 4500 ppm.  相似文献