Geochemical Aspects of Hypogene Hydrothermal Alteration Zones in the Chol-qeshlaghi Area, NW Iran: Constrains on REEs     

Kamal SIAHCHESHM  Mohammad SHAHSAVANI BAMI 《《地质学报》英文版》2020,94(3):777-788

Chol-qeshlaghi altered area lies in the northwestern part of the post-collisional Urumieh-Dokhtar magmatic arc, NW Iran. Pervasive silicic, argillic, phyllic and propylitic altered zones appears to be intimately affiliated to the fluids derivative of upper Oligocene Khankandi granodiorite. This paper is dedicated to the identification of geochemical characteristics of hydrothermal alterations, focusing on the determination of the mass gains and losses of REEs, to gain significant insights regarding the chemical exchanges prevailed between the host rocks and hydrothermal fluids. The low pH and high activity of SO_4~(-2) ligands in silicic alteration fluids, resulting in depletion of entire REEs. Decreasing of LREEs appeared in argillic zone may attributed to reduce in adsorption ability of clay minerals in low pH; whereas HREEs enrichment in phyllic zone was inclined to put it down to the abundance of sericite(± Fe oxides). A significant reduction of Eu/Eu* ratio in silicic zone can be attributed to negligible sulfides and clay minerals as some effective agents in adsorption of released Eu~(+2). Factors such as changes in pH, the abundance of absorptive neomorph mineral phases, activity of ligands play an important role in controlling the distribution and concentration of REEs in Chol-qeshlaghi alteration system.  相似文献   

Modelling and predicting the spatial dispersion of skin cancer considering environmental and socio-economic factors using a digital earth approach     

Zohreh Masoumi  John L. van Genderen  Mohammad Sadi Mesgari 《International Journal of Digital Earth》2020,13(6):661-682

ABSTRACT

Almost all causative factors of diseases depend on location. The Digital Earth approach is suitable for studying diseases globally. Geospatial information systems integrated with statistical models can be used to model the relationship between a disease and its causative factors. Through modelling, the most important causative factors can be extracted and the epidemiology of the disease can be observed. In this paper, skin cancer (the most common type of cancer) has been modelled based on its causative factors, including climate factors, people's occupations, nutrition habits, socio-economic factors, and usage of chemical fertiliser. To fit the model, a data framework was first designed, and then data were gathered and processed. Finally, the disease was modelled using Generalised Linear Models (GLM), a statistical model based on the location of the factors. The results of this study identify the most important causative factors together with their relative priority. Furthermore, a model was used to predict the change in skin cancer occurrences caused by a change in one of its causative factors. This work illustrates the ability of the model to predict disease occurrence. Thus, by using this Digital Earth approach, skincancer can be studied in all the key countries around the world.  相似文献   

Improving the efficiency of ant algorithms using adaptive refinement: Application to storm water network design     

M.H. Afshar 《Advances in water resources》2006

The ant algorithm is a new evolutionary optimization method proposed for the solution of discrete combinatorial optimization problems. Many engineering optimization problems involve decision variables of continuous nature. Application of the ant algorithm to the optimization of these continuous problems requires discretization of the continuous search space, thereby reducing the underlying continuous problem to a discrete optimization problem. The level of discretization of the continuous search space, however, could present some problems. Generally, coarse discretization of the continuous design variables could adversely affect the quality of the final solution while finer discretization would enlarge the scale of the problem leading to higher computation cost and, occasionally, to low quality solutions. An adaptive refinement procedure is introduced in this paper as a remedy for the problem just outlined. The method is based on the idea of limiting the originally wide search space to a smaller one once a locally converged solution is obtained. The smaller search space is designed to contain the locally optimum solution at its center. The resulting search space is discretized and a completely new search is conducted to find a better solution. The procedure is continued until no improvement can be made by further refinement. The method is applied to a benchmark problem in storm water network design discipline and the results are compared with those of existing methods. The method is shown to be very effective and efficient regarding the optimality of the solution, and the convergence characteristics of the resulting ant algorithm. Furthermore, the method proves itself capable of finding an optimal, or near-optimal solution, independent of the discretization level and the size of the colony used.  相似文献   

Transient analysis of wave propagation in non‐homogeneous elastic unbounded domains by using the scaled boundary finite‐element method     

Mohammad Hossein Bazyar  Chongmin Song 《地震工程与结构动力学》2006,35(14):1787-1806

The scaled boundary finite‐element method has been developed for the dynamic analysis of unbounded domains. In this method only the boundary is discretized resulting in a reduction of the spatial dimension by one. Like the finite‐element method no fundamental solution is required. This paper extends the scaled boundary finite‐element method to simulate the transient response of non‐homogeneous unbounded domains with the elasticity modulus and mass density varying as power functions of spatial coordinates. To reduce the number of degrees of freedom and the computational cost, the technique of reduced set of base functions is applied. The scaled boundary finite‐element equation for an unbounded domain is reformulated in generalized coordinates. The resulting acceleration unit‐impulse response matrix is obtained and assembled with the equation of motion of standard finite elements. Numerical examples of non‐homogeneous isotropic and transversely isotropic unbounded domains demonstrate the accuracy of the scaled boundary finite‐element method. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Ground viscosity and stiffness measurements for near surface seismic velocity   总被引：1，自引：0，他引：1  

Robert Ley  Willem Adolfs  Ralph Bridle  Mohammad Al-Homaili  Aldo Vesnaver  Paul Ras 《Geophysical Prospecting》2006,54(6):751-762

In land surveys, the weathering layer can often distort the seismic signal due to it passing through rapid velocity and density changes, dispersion, scattering and inelastic absorption. In a simple spring‐dashpot model for the earth response, an equivalent medium groups these complex phenomena into two parameters only; these are called ground viscosity and ground stiffness. The most recent controllers for vibrators can estimate both parameters. To validate these measurements, Saudi Aramco conducted an experiment measuring ground viscosity and stiffness from two different vibrator control systems over an area of varying terrain conditions, including unconsolidated sand and limestone outcrop. The two systems measured different values, but detected similar trends that correlated well with weathering conditions and surface geology, e.g. lower viscosity values on the outcrop than on the sand. The ratio of ground viscosity to ground stiffness can approximate the shallow S‐wave velocity, which we converted into P‐wave velocity through calibration with sparse uphole data. Static corrections incorporating this velocity information somewhat improved the focusing of seismic time sections. This new approach does not require additional acquisition efforts, and can model shallow complex formations in arid areas where classical static methods often fail.  相似文献   

Early Cretaceous sedimentary provenance and structural evolution of the central Sanandaj–Sirjan Zone,Iran: implications for palaeogeographic reconstructions of the northern Neo-Tethyan margin     

Mohammad Ali Salehi  Meisam Tadayon 《International Geology Review》2020,62(11):1359-1386

ABSTRACT

The Early Cretaceous was an important epoch in the evolution of the Earth system in which major tectonic episodes occurred, especially along the Alpine–Himalayan belt. The paucity of reliable palaeogeographic data from the central segment of this geological puzzle, however, hampers the reconstruction of a panoramic view of its Early Cretaceous palaeogeography and geodynamic setting. Here we present multidisciplinary provenance data from Lower Cretaceous strata of the overriding plate of the Neo-Tethyan subduction zone (the Sanandaj–Sirjan Zone; SSZ, of central Iran), including structural, basin-fill evolution, petrographic and geochemical analyses. Sandstone provenance analysis of Lower Cretaceous red beds suggests the occurrence of sub-mature litho-quartzose sandstones attributed to an active continental arc margin in convergent setting predominantly derived from plutonic, quartzose sedimentary and metamorphic rocks exposed in the central SSZ. Weathering indices indicate moderate chemical weathering in the source area which may be related to close source-to-sink relationships or arid climate. Our palaeogeographic reconstructions and original geological mapping indicate that the erosion of uplifted basement rocks exposed in horst blocks provided the sediment sources for the syn-extensional deposition of uppermost Jurassic–lowermost Cretaceous conglomerates and Lower Cretaceous siliciclastic red beds within a continental retro-arc basin during initiation of the ‘Neo-Tethys 2?. The polyphase tectonic reactivation along the principal fault of the study area controlled the syn- and post-extensional tectonostratigraphic evolution that reflect the corresponding mechanical decoupling/coupling along the northern Neo-Tethyan plate margin.  相似文献   

Model for simulating soil-water content considering evapotranspiration — Reply     

Abas Afshar  Miguel A. Marino 《Journal of Hydrology》1979,40(3-4):393-395

  相似文献   

On the occurrence and origin of anthropogenic radionuclides found in a fragment of the Chelyabinsk (LL5) meteorite          下载免费PDF全文

Rebecca Querfeld  Mohammad R. Tanha  Lars Heyer  Franz Renz  Georg Guggenberger  Franz Brandstätter  Ludovic Ferrière  Christian Koeberl  Georg Steinhauser 《Meteoritics & planetary science》2017,52(6):1244-1250

A piece of the 2013 Chelyabinsk meteorite was investigated for its content of anthropogenic radionuclides. In addition to traces of cesium‐137 that had been previously reported for this particular fragment, we found an unusually high amount of strontium‐90, which indicates that the source of this contamination was the Kyshtym accident (1957). A high Sr‐90/Cs‐137 activity ratio is characteristic for Kyshtym‐derived contaminations. Based on the cesium‐137 content in the soil from the finding site, it is estimated that the fragment was contaminated with soil particles in the milligram range upon impact. Investigation of the soil revealed very unusual ferromagnetic characteristics and an iron‐rich chemical composition. Mössbauer spectroscopy indicated the presence of steel components in this soil, suggesting that the investigated meteorite fragment was found in an industrial dumping site rather than natural soil.  相似文献   

Three‐dimensional nonlinear finite element analysis of pile groups in saturated porous media using a new transmitting boundary     

Mohammad Reza Maleki Javan  Asadollah Noorzad  Manouchehr Latifi Namin 《国际地质力学数值与分析法杂志》2008,32(6):681-699

The dynamic behaviour of pile groups subjected to an earthquake base shaking is analysed. An analysis is formulated in the time domain and the effects of material nonlinearity of soil, pile–soil–pile kinematic interaction and the superstructure–foundation inertial interaction on seismic response are investigated. Prediction of response of pile group–soil system during a large earthquake requires consideration of various aspects such as the nonlinear and elasto‐plastic behaviour of soil, pore water pressure generation in soil, radiation of energy away from the pile, etc. A fully explicit dynamic finite element scheme is developed for saturated porous media, based on the extension of the original formulation by Biot having solid displacement (u) and relative fluid displacement (w) as primary variables (u–w formulation). All linear relative fluid acceleration terms are included in this formulation. A new three‐dimensional transmitting boundary that was developed in cartesian co‐ordinate system for dynamic response analysis of fluid‐saturated porous media is implemented to avoid wave reflections towards the structure. In contrast to traditional methods, this boundary is able to absorb surface waves as well as body waves. The pile–soil interaction problem is analysed and it is shown that the results from the fully coupled procedure, using the advanced transmitting boundary, compare reasonably well with centrifuge data. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

Limiting equilibrium method for slope/drilled shaft system     

Mohammad Yamin  Robert Y. Liang 《国际地质力学数值与分析法杂志》2010,34(10):1063-1075

The use of drilled shafts to stabilize an unstable slope has been a widely accepted practice. There are two basic design and analysis issues involved: one is to determine the global factor of safety of the drilled shafts stabilized slope and the other one is to determine the design earth thrust on the drilled shafts for structural design of the shafts. In this paper, a limiting equilibrium method of slices based solution for calculating global factor of safety (FS) of a slope with the presence of a row of drilled shafts is developed. The arching mechanisms due to the presence of the drilled shafts on slope were taken into account by a load transfer factor. The method for calculating the net force applied to the drilled shaft from the soil mass was also developed. The interrelationships among the drilled shaft location on the slope, the load transfer factor, and the global FS of the slope/shaft system were derived utilizing the developed numerical closed‐form solution. An illustrative example is presented to elucidate the use of the solution in optimizing the location of the drilled shafts on slope to achieve the desired global factor of safety of the slope/shaft system. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献