Main features of crustal structure in western and southern Europe based on data of explosion seismology     

P. Giese  C. Morelli  L. Steinmetz   《Tectonophysics》1973,20(1-4):367-379

During the past two decades deep seismic sounding measurements have been carried out in western and southern Europe, mainly using the refraction method. These investigations were performed partly on a national basis but as well within international cooperative programs under the sponsorship of the European Seismological Commission.

In France, a systematic study has been executed to determine the main feature of deep structures under the Central Massif and the Paris Basin. In the Forez and Margeride regions, the sub-crustal velocity is lower (7.2 km/sec) than the normal value (8.0 km/sec) observed in the adjacent areas.

The central and southern part of Western Germany is covered by an extensive network of refraction profiles. The crustal thickness varies, similarly to France, from 25 to 35 km. A great amount of deep reflection data was obtained by commercial and special reflection work. The crust beneath the Rhinegraben area shows the typical “rift system” structure with a low subcrustal velocity (7.4–7.7 km/sec).

Very intensive refraction work has been carried out in the Alpine area. The maximum crustal thickness found near the axis of the negative gravity anomaly is about 55–60 km. Furthermore, a clear lowvelocity layer at a depth between 10 and 30 km has been detected. A key position with regard to the geotectonic structure of the Alps is held by the zone of Ivrea characterized by a pronounced gravity high. From the refraction work it may be concluded that there material of the lower crust and the upper mantle (7.2–7.5 km/sec) is overlying a layer of extremely low velocity (5.0 km/sec) which is interpreted as sialic crust.

Three years ago, a systematic study of crustal structure of the Italian peninsula has been started. Reversed profiles were observed on Sicily, in Calabria, and in Puglia. On Sicily, the structure is very complicated; the crust of the western part looks like a transition between a continental and oceanic structure whereas the eastern side shows a continental-type crust. In Calabria and Puglia, the crustal thickness has been determined to be about 25–35 km.  相似文献   

Speedup of post earthquake community recovery: the case of precast industrial buildings after the Emilia 2012 earthquake   总被引：1，自引：1，他引：0  

F. Braga  R. Gigliotti  G. Monti  F. Morelli  C. Nuti  W. Salvatore  I. Vanzi 《Bulletin of Earthquake Engineering》2014,12(5):2405-2418

The Emilia, May–July 2012, earthquake hit a highly industrialized area, where some tens thousands industrial buldings, mainly single storey precast structures, are located. Due to the likelihood of strong after shocks and the high vulnerability of these structures, the authorities first asked for a generalized seismic retrofit after the strong shakings of May 20th. In order to accelerate community recovery, this requirement was later loosened, leaving out the buildings which had undergone a strong enough shaking without any damage; the strong enough shaking was defined with reference to the ultimate limit state design earthquake. To the authors’ knowledge, it is the first time that the information on the earthquake intensity and structural damage is used for such a large scale post earthquake simplified safety assessment. In short, the earthquake was used as large experimental test. This paper shows the details of the models and computations made to identify the industrial buildings which have been considered earthquake tested and therefore not compelled to mandatory seismic retrofit. Since earthquake indirect (e.g. due to economic halt) costs may be as large the direct ones, or even larger, it is believed that this method may considerably lower the earthquake total costs and speed up the social and economic recovery of a community.  相似文献   

Chemical compositions of impact melt breccias and target rocks from the Tenoumer impact crater,Mauritania     

Giovanni Pratesi  Marco Morelli  Angelo Pio Rossi  Gian Gabriele Ori 《Meteoritics & planetary science》2005,40(11):1653-1672

Abstract— The impact melt breccias from the Tenoumer crater (consisting of a fine‐grained intergrowth of plagioclase laths, pyroxene crystals, oxides, and glass) display a wide range of porosity and contain a large amount of target rock clasts. Analyses of major elements in impact melt rocks show lower contents of SiO₂, Al₂O₃, and Na₂O, and higher contents of MgO, Fe₂O₃, and CaO, than the felsic rocks (i.e., granites and gneisses) of the basement. In comparison with the bulk analyses of the impact melt, the glass is strongly enriched in Si‐Al, whereas it is depleted both in Mg and Fe; moreover, the impact melt rocks are variably enriched or depleted in some REE with respect to the felsic and mafic bedrock types. Gold is slightly enriched in the impact melt, and Co, Cr, and Ni abundances are possibly due to a contribution from mafic bedrock. Evidences of silicate‐carbonate liquid immiscibility, mainly as spherules and globules of calcite within the silicate glass, have been highlighted. HMX mixing calculation confirm that the impact melt rocks are derived from a mixing of at least six different target lithologies outcropping in the area of the crater. A large contribution is derived from granitoids (50%) and mica schist (17–19%), although amphibolites (?15%), cherty limestones (?10%), and ultrabasites (?6%) components are also present. The very low abundances of PGE in the melt rock seem to come mainly from some ultrabasic target rocks; therefore, the contamination from the meteoritic projectile appears to have been negligible.  相似文献   

Daily hydrological modeling in the Amazon basin using TRMM rainfall estimates   总被引：5，自引：0，他引：5  

Bruno Collischonn  Walter Collischonn  Carlos Eduardo Morelli Tucci 《Journal of Hydrology》2008,360(1-4):207-216

Rainfall measurements by conventional raingauges provide relatively accurate estimates at a few points of a region. The actual rainfield can be approximated by interpolating the available raingauge data to the remaining of the area of interest. In places with relatively low gauge density such interpolated rainfields will be very rough estimates of the actual events. This is especially true for tropical regions where most rainfall has a convective origin with high spatial variability at the daily level. Estimates of rainfall by remote sensing can be very useful in regions such as the Amazon basin, where raingauge density is very low and rainfall highly variable. This paper evaluates the rainfall estimates of the Tropical Rainfall Measuring Mission (TRMM) satellite over the Tapajós river basin, a major tributary of the Amazon. Three-hour TRMM rainfall estimates were aggregated to daily values and were compared with catch of ground-level precipitation gauges on a daily basis after interpolating both data to a regular grid. Both daily TRMM and raingauge-interpolated rainfields were then used as input to a large-scale hydrological model for the whole basin; the calculated hydrographs were then compared to observations at several streamgauges along the river Tapajos and its main tributaries. Results of the rainfield comparisons showed that satellite estimates can be a practical tool for identifying damaged or aberrant raingauges at a basin-wide scale. Results of the hydrological modeling showed that TRMM-based calculated hydrographs are comparable with those obtained using raingauge data.  相似文献   

Debris flow hazard assessment by means of numerical simulations: implications for the Rotolon creek valley (Northern Italy)     

Teresa Salvatici  Stefano Morelli  Veronica Pazzi  William Frodella  Riccardo Fanti 《山地科学学报》2017,14(4):636-648

On 4^th November 2010, a debris flow detached from a large debris cover accumulated above the lowermost portion of the Rotolon landslide (Vicentine Pre-Alps, NE Italy) and channelized in the valley below within the Rotolon Creek riverbed. Such event evolved into a highly mobile and sudden debris flow, damaging some hydraulic works and putting at high risk four villages located along the creek banks. A monitoring campaign was carried out by means of a ground based radar interferometer (GB-InSAR) to evaluate any residual displacement risk in the affected area and in the undisturbed neighbouring materials. Moreover, starting from the current slope condition, a landslide runout numerical modelling was performed by means of DAN-3D code to assess the impacted areas, flow velocity, and deposit distribution of the simulated events. The rheological parameters necessary for an accurate modelling were obtained through the back analysis of the 2010 debris flow event. Back analysis was calibrated with all of the available terrain data coming from field surveys and ancillary documents, such as topographic, geomorphological and geological maps, with pre- and post-event LiDAR derived DTMs, and with orthophotos. Finally, to identify new possible future debris flow source areas as input data for the new modelling, all the obtained terrain data were reanalysed and integrated with the GB-InSAR displacement maps; consequently, new simulations were made to forecast future events. The results show that the integration of the selected modelling technique with ancillary data and radar displacement maps can be a very useful tool for managing problems related to debris flow events in the examined area.  相似文献   

Terrestrial laser scanner and geomechanical surveys for the rapid evaluation of rock fall susceptibility scenarios   总被引：3，自引：1，他引：2  

Giovanni Gigli  Stefano Morelli  Simone Fornera  Nicola Casagli 《Landslides》2014,11(1):1-14

The primary objective of this paper is to present a semiautomatic procedure that, integrated with traditional methods, can be useful for a rapid definition of rock fall susceptibility scenarios with the purpose of civil protection. Due to its morphology (steep slopes and narrow valleys), regional seismicity, and rock mass characteristics, the Nera Valley (Valnerina, Umbria Region, Italy) is characterized by high rock fall risk. With the aim of covering a wide range of features and investigating the main advantages and drawbacks of the proposed approach, data collection (terrestrial laser scanning (TLS) and geomechanical surveys) was carried out at three different slopes. Detailed three-dimensional (3D) models were created to reconstruct the shape and volume of the most unstable blocks, to define the position of the main rock fall source areas, and to precisely distinguish the outcropping materials and the position of the elements at risk for reliable runout analyses. The proposed approach can be useful in supporting proper maintenance and land management programs both in ordinary and in emergency circumstances.  相似文献