Recognition of effective factors that influence the spatial extension of supergene weathering zones is important both for the identification of high potential areas of exotic deposits and for the cost-effective planning of mining. In particular, recognition of exotic mineralization around porphyry copper deposits early in mine development prevents them from being buried beneath mine infrastructures such as waste dump and tailing structures. Mass-balance modeling, a practical method for determining high potential areas of undiscovered exotic mineralization, investigates important factors in forming exotic deposits. Mass-balance modeling is a two-phase methodology that becomes progressively more detailed. An initial result, presented here as phase 1, is based solely on Cu assays. Phase 2 incorporates relict sulfide mineral studies to improve phase 1 modeling results and computes actual fluxes of copper that escaped vertically downward from the leached cap to form the enrichment blanket and then flowed laterally away to form exotic mineralization. In addition, geostatistical approaches, especially sequential Gaussian simulation, are useful tools for investigating the spatial relationships and modeling of mass-balance results in phase 1 studies. This paper introduces a method for interpolation and downscaling of the preliminary mass-balance analysis (phase 1) to highlight the role of geological features in the evolution of the supergene process. Using only copper assays without any need for relict sulfide mineralogy, this approach can be used to approximately identify the geographic direction of metal movement in exotic copper deposits, and thus serve as an initial exploration guide in prospecting for exotic deposits. For this, a vertical columnar block model was constructed for each of the supergene weathering zones and preliminary analysis of mass balance was conducted to reconstruct the apparent total leached zone column height assuming zero lateral flux. This analysis was applied to each of the vertical block model columns. The results of mass balance were interpolated in a 5?×?5 m grid by sequential Gaussian simulation method, and the simulated surface of the total leached zone was conflated with geological features. The roles of topography, argillic alteration and linear structures were identified in the transport of supergene solutions in the Miduk porphyry copper deposit of Iran. In the northern section of the deposit, which is in accordance with the topography gradient and the presence of advanced argillic alteration zone, the computed top total of leaching is below the actual surface topography, whereas the hypogene isograd curves confirm the expansion of primary copper in these areas. The northern section of the deposit was introduced as a susceptible area for the removal of copper-bearing solutions from the supergene enrichment system.
相似文献 |
|||||||
|
|||||||
|
排序方式： 共有72条查询结果，搜索用时 15 毫秒
51.
Abedi Maysam Asghari Omid Norouzi Gholam-Hossain 《Arabian Journal of Geosciences》2015,8(4):2179-2189
Arabian Journal of Geosciences - This paper describes a general framework of incorporating magnetic data as prior information in the modeling of an iron deposit based on sparse drilling boreholes.... 相似文献
52.
A new approach for the geological risk evaluation of coal resources through a geostatistical simulation 总被引：1，自引：1，他引：0
Estimations of mineral resources and ore reserves have been recently widely used by mining engineers and investors. The classification framework based on the prepared code by the Joint Ore Reserves Committee of The Australasian Institute of Mining and Metallurgy, Australian Institute of Geoscientists and Minerals Council of Australia (JORC code), which is one of the international standards for mineral resource and ore reserve reporting, provides a template system that conforms to international society requirements. Recent research has shown that an existing fault risk can affect the mineral resource and ore reserve estimation. According to this research, the faulted area that is involved in the effect on the estimated region is so extensive that it is not distinguishable. In this research, a new method called FGT (F for fault, G for grade and T for thickness) is introduced and presented for the estimation of mineral resources. The proposed method can provide an error map of a particular aspect of the combination of coal accumulation (G), fault risk (F) and thickness (T), and its output would categorise the mineral resources. This method was implemented in the Parvadeh Ш coal deposit, which is located in the eastern portion of Central Iran. The deposit contains five seams named B1, B2, C1, C2 and D; of these, C1 was selected as the most important seam in the exploratory grid analysis. Thus, C1 alone can reflect the properties of the Parvadeh Ш deposit. In this study, we compared the conventional method and the FGT method. This comparison indicated that the areas that should be rejected from the region in the FGT method are less and more distinguishable than those determined with the conventional method. Therefore, the inferred resources can be completely differentiated from the indicated and measured resources with a high resolution. The conventional method cannot distinguish between these three categories at this level of resolution. Therefore, the FGT approach has high precision in classifying the coal resource compared to the conventional method. 相似文献
53.
Fault detection in 3D by sequential Gaussian simulation of Rock Quality Designation (RQD) 总被引：1，自引：0，他引：1
Gazestan phosphate ore deposit (Central Iran) is an apatite deposit which is instrumental in selecting the method of excavation. The position of fault systems and the condition of rock quality also play a role in the method used for mineral resources and ore reserves estimation. Conversely, the Rock Quality Designation (RQD) is a parameter that provides a quantitative judgment of rock mass quality obtained from drill cores. This factor can be applied to detect the fractured zones which occur due to fault systems. Additionally, the faulted areas can be determined by surface geological map and a few by core drilling. Some of the faulted areas are not distinguishable in the surface and are covered by soils, especially within 3D modeling and visualization. In this study, an attempt has been made to establish a relationship between the RQD percentages which were geostatistically simulated and faulted areas through the region. In comparison, the results showed that low RQD domains (RQD <20 %) can be interpreted as fault zones; high RQD domains (RQD >50 %) correspond to less fractured areas, and the contact between high and low RQD domain is gradual. Therefore, this categorization of RQD domains can be incorporated to detect the faulted zones in 3D models for mine design. Based on the categorization, the uncertainty within the area was calculated to introduce two new core drilling points for the completion of this phase of exploratory grid from the fault structural viewpoint, in order to have a proper model of ore reserve to estimate. It was concluded that this procedure can be utilized for conceptual comprehension of fault trends in 3D modeling for the method selection of excavation and complete the estimation procedure phase. 相似文献
54.
Mehmet Aktas Galip Aydin Andrea Donnellan Geoffrey Fox Robert Granat Lisa Grant Greg Lyzenga Dennis McLeod Shrideep Pallickara Jay Parker Marlon Pierce John Rundle Ahmet Sayar Terry Tullis 《Pure and Applied Geophysics》2006,163(11-12):2281-2296
We describe the goals and initial implementation of the International Solid Earth Virtual Observatory (iSERVO). This system is built using a Web Services approach to Grid computing infrastructure and is accessed via a component-based Web portal user interface. We describe our implementations of services used by this system, including Geographical Information System (GIS)-based data grid services for accessing remote data repositories and job management services for controlling multiple execution steps. iSERVO is an example of a larger trend to build globally scalable scientific computing infrastructures using the Service Oriented Architecture approach. Adoption of this approach raises a number of research challenges in millisecond-latency message systems suitable for internet-enabled scientific applications. We review our research in these areas. 相似文献
55.
Omid?Hamidi Leili?Tapak Hamed?Abbasi Zohreh?MaryanajiEmail author 《Theoretical and Applied Climatology》2018,134(3-4):769-776
We have conducted a case study to investigate the performance of support vector machine, multivariate adaptive regression splines, and random forest time series methods in snowfall modeling. These models were applied to a data set of monthly snowfall collected during six cold months at Hamadan Airport sample station located in the Zagros Mountain Range in Iran. We considered monthly data of snowfall from 1981 to 2008 during the period from October/November to April/May as the training set and the data from 2009 to 2015 as the testing set. The root mean square errors (RMSE), mean absolute errors (MAE), determination coefficient (R 2), coefficient of efficiency (E%), and intra-class correlation coefficient (ICC) statistics were used as evaluation criteria. Our results indicated that the random forest time series model outperformed the support vector machine and multivariate adaptive regression splines models in predicting monthly snowfall in terms of several criteria. The RMSE, MAE, R 2, E, and ICC for the testing set were 7.84, 5.52, 0.92, 0.89, and 0.93, respectively. The overall results indicated that the random forest time series model could be successfully used to estimate monthly snowfall values. Moreover, the support vector machine model showed substantial performance as well, suggesting it may also be applied to forecast snowfall in this area. 相似文献
56.
57.
Lateral deformation of liquefiable soil is a cause of much damage during earthquakes, reportedly more than other forms of liquefaction-induced ground failures. Researchers have presented studies in which the liquefied soil is considered as viscous fluid. In this manner, the liquefied soil behaves as non-Newtonian fluid, whose viscosity decreases as the shear strain rate increases. The current study incorporates computational fluid dynamics to propose a simplified dynamic analysis for the liquefaction-induced lateral deformation of earth slopes. The numerical procedure involves a quasi-linear elastic model for small to moderate strains and a Bingham fluid model for large strain states during liquefaction. An iterative procedure is considered to estimate the strain-compatible shear stiffness of soil. The post-liquefaction residual strength of soil is considered as the initial Bingham viscosity. Performance of the numerical procedure is examined by using the results of centrifuge model and shaking table tests together with some field observations of lateral ground deformation. The results demonstrate that the proposed procedure predicts the time history of lateral ground deformation with a reasonable degree of precision. 相似文献
58.
Marlon E. Pierce Geoffrey C. Fox Mehmet S. Aktas Galip Aydin Harshawardhan Gadgil Zhigang Qi Ahmet Sayar 《Pure and Applied Geophysics》2008,165(3-4):635-651
We describe our distributed systems research efforts to build the “cyberinfrastructure” components that constitute a geophysical Grid, or more accurately, a Grid of Grids. Service-oriented computing principles are used to build a distributed infrastructure of Web accessible components for accessing data and scientific applications. Our data services fall into two major categories: Archival, database-backed services based around Geographical Information System (GIS) standards from the Open Geospatial Consortium, and streaming services that can be used to filter and route real-time data sources such as Global Positioning System data streams. Execution support services include application execution management services and services for transferring remote files. These data and execution service families are bound together through metadata information and workflow services for service orchestration. Users may access the system through the QuakeSim scientific Web portal, which is built using a portlet component approach. 相似文献
59.
60.
Natural Resources Research - Geometallurgy integrates many aspects of geology, mineralogy, resource modeling, mine planning, metallurgy, and process control to optimize mining operations.... 相似文献
|
| 设为首页 | 免责声明 | 关于勤云 | 加入收藏 |
|
Copyright©北京勤云科技发展有限公司 京ICP备09084417号 |